diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
new file mode 100644
index 0000000..21e1df3
--- /dev/null
+++ b/include/asm-arm26/serial.h
@@ -0,0 +1,63 @@
+/*
+ *  linux/include/asm-arm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#if defined(CONFIG_ARCH_A5K)
+     /* UART CLK        PORT  IRQ     FLAGS        */
+
+#define STD_SERIAL_PORT_DEFNS                                           \
+        { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS },     /* ttyS0 */     \
+        { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS },     /* ttyS1 */
+
+#else
+
+#define STD_SERIAL_PORT_DEFNS                                           \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS0 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS1 */
+
+#endif
+
+#define EXTRA_SERIAL_PORT_DEFNS \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS2 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS3 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS4 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS5 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS6 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS7 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS8 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS9 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS10 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS11 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS12 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS13 */
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS
+
+#endif