diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
new file mode 100644
index 0000000..6f74d4c
--- /dev/null
+++ b/include/asm-i386/system.h
@@ -0,0 +1,473 @@
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <linux/bitops.h> /* for LOCK_PREFIX */
+
+#ifdef __KERNEL__
+
+struct task_struct;	/* one of the stranger aspects of C forward declarations.. */
+extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
+
+#define switch_to(prev,next,last) do {					\
+	unsigned long esi,edi;						\
+	asm volatile("pushfl\n\t"					\
+		     "pushl %%ebp\n\t"					\
+		     "movl %%esp,%0\n\t"	/* save ESP */		\
+		     "movl %5,%%esp\n\t"	/* restore ESP */	\
+		     "movl $1f,%1\n\t"		/* save EIP */		\
+		     "pushl %6\n\t"		/* restore EIP */	\
+		     "jmp __switch_to\n"				\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"					\
+		     "popfl"						\
+		     :"=m" (prev->thread.esp),"=m" (prev->thread.eip),	\
+		      "=a" (last),"=S" (esi),"=D" (edi)			\
+		     :"m" (next->thread.esp),"m" (next->thread.eip),	\
+		      "2" (prev), "d" (next));				\
+} while (0)
+
+#define _set_base(addr,base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+         "0" (base) \
+        ); } while(0)
+
+#define _set_limit(addr,limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+        ); } while(0)
+
+#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) )
+#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1)>>12 )
+
+static inline unsigned long _get_base(char * addr)
+{
+	unsigned long __base;
+	__asm__("movb %3,%%dh\n\t"
+		"movb %2,%%dl\n\t"
+		"shll $16,%%edx\n\t"
+		"movw %1,%%dx"
+		:"=&d" (__base)
+		:"m" (*((addr)+2)),
+		 "m" (*((addr)+4)),
+		 "m" (*((addr)+7)));
+	return __base;
+}
+
+#define get_base(ldt) _get_base( ((char *)&(ldt)) )
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg,value)			\
+	asm volatile("\n"			\
+		"1:\t"				\
+		"movl %0,%%" #seg "\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:\t"				\
+		"pushl $0\n\t"			\
+		"popl %%" #seg "\n\t"		\
+		"jmp 2b\n"			\
+		".previous\n"			\
+		".section __ex_table,\"a\"\n\t"	\
+		".align 4\n\t"			\
+		".long 1b,3b\n"			\
+		".previous"			\
+		: :"m" (*(unsigned int *)&(value)))
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value) \
+	asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value)))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+#define read_cr0() ({ \
+	unsigned int __dummy; \
+	__asm__( \
+		"movl %%cr0,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr0(x) \
+	__asm__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr4() ({ \
+	unsigned int __dummy; \
+	__asm__( \
+		"movl %%cr4,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr4(x) \
+	__asm__("movl %0,%%cr4": :"r" (x));
+#define stts() write_cr0(8 | read_cr0())
+
+#endif	/* __KERNEL__ */
+
+#define wbinvd() \
+	__asm__ __volatile__ ("wbinvd": : :"memory");
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	__asm__("lsll %1,%0"
+		:"=r" (__limit):"r" (segment));
+	return __limit+1;
+}
+
+#define nop() __asm__ __volatile__ ("nop")
+
+#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+
+/*
+ * The semantics of XCHGCMP8B are a bit strange, this is why
+ * there is a loop and the loading of %%eax and %%edx has to
+ * be inside. This inlines well in most cases, the cached
+ * cost is around ~38 cycles. (in the future we might want
+ * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
+ * might have an implicit FPU-save as a cost, so it's not
+ * clear which path to go.)
+ *
+ * cmpxchg8b must be used with the lock prefix here to allow
+ * the instruction to be executed atomically, see page 3-102
+ * of the instruction set reference 24319102.pdf. We need
+ * the reader side to see the coherent 64bit value.
+ */
+static inline void __set_64bit (unsigned long long * ptr,
+		unsigned int low, unsigned int high)
+{
+	__asm__ __volatile__ (
+		"\n1:\t"
+		"movl (%0), %%eax\n\t"
+		"movl 4(%0), %%edx\n\t"
+		"lock cmpxchg8b (%0)\n\t"
+		"jnz 1b"
+		: /* no outputs */
+		:	"D"(ptr),
+			"b"(low),
+			"c"(high)
+		:	"ax","dx","memory");
+}
+
+static inline void __set_64bit_constant (unsigned long long *ptr,
+						 unsigned long long value)
+{
+	__set_64bit(ptr,(unsigned int)(value), (unsigned int)((value)>>32ULL));
+}
+#define ll_low(x)	*(((unsigned int*)&(x))+0)
+#define ll_high(x)	*(((unsigned int*)&(x))+1)
+
+static inline void __set_64bit_var (unsigned long long *ptr,
+			 unsigned long long value)
+{
+	__set_64bit(ptr,ll_low(value), ll_high(value));
+}
+
+#define set_64bit(ptr,value) \
+(__builtin_constant_p(value) ? \
+ __set_64bit_constant(ptr, value) : \
+ __set_64bit_var(ptr, value) )
+
+#define _set_64bit(ptr,value) \
+(__builtin_constant_p(value) ? \
+ __set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \
+ __set_64bit(ptr, ll_low(value), ll_high(value)) )
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+		case 1:
+			__asm__ __volatile__("xchgb %b0,%1"
+				:"=q" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 2:
+			__asm__ __volatile__("xchgw %w0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 4:
+			__asm__ __volatile__("xchgl %0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#ifdef CONFIG_X86_CMPXCHG
+#define __HAVE_ARCH_CMPXCHG 1
+#endif
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 2:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 4:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+					(unsigned long)(n),sizeof(*(ptr))))
+    
+#ifdef __KERNEL__
+struct alt_instr { 
+	__u8 *instr; 		/* original instruction */
+	__u8 *replacement;
+	__u8  cpuid;		/* cpuid bit set for replacement */
+	__u8  instrlen;		/* length of original instruction */
+	__u8  replacementlen; 	/* length of new instruction, <= instrlen */ 
+	__u8  pad;
+}; 
+#endif
+
+/* 
+ * Alternative instructions for different CPU types or capabilities.
+ * 
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ * 
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ * 
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature) 	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n" 		     \
+		      ".section .altinstructions,\"a\"\n"     	     \
+		      "  .align 4\n"				       \
+		      "  .long 661b\n"            /* label */          \
+		      "  .long 663f\n"		  /* new instruction */ 	\
+		      "  .byte %c0\n"             /* feature bit */    \
+		      "  .byte 662b-661b\n"       /* sourcelen */      \
+		      "  .byte 664f-663f\n"       /* replacementlen */ \
+		      ".previous\n"						\
+		      ".section .altinstr_replacement,\"ax\"\n"			\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */    \
+		      ".previous" :: "i" (feature) : "memory")  
+
+/*
+ * Alternative inline assembly with input.
+ * 
+ * Pecularities:
+ * No memory clobber here. 
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the 
+ * replacement maake sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)		\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"				\
+		      ".section .altinstructions,\"a\"\n"			\
+		      "  .align 4\n"						\
+		      "  .long 661b\n"            /* label */			\
+		      "  .long 663f\n"		  /* new instruction */ 	\
+		      "  .byte %c0\n"             /* feature bit */		\
+		      "  .byte 662b-661b\n"       /* sourcelen */		\
+		      "  .byte 664f-663f\n"       /* replacementlen */ 		\
+		      ".previous\n"						\
+		      ".section .altinstr_replacement,\"ax\"\n"			\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */ 	\
+		      ".previous" :: "i" (feature), ##input)
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+ 
+
+/* 
+ * Actually only lfence would be needed for mb() because all stores done 
+ * by the kernel should be already ordered. But keep a full barrier for now. 
+ */
+
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like thiswhere there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_X86_OOSTORE
+/* Actually there are no OOO store capable CPUs for now that do SSE, 
+   but make it already an possibility. */
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define wmb()	__asm__ __volatile__ ("": : :"memory")
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/* interrupt control.. */
+#define local_save_flags(x)	do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
+#define local_irq_restore(x) 	do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0)
+#define local_irq_disable() 	__asm__ __volatile__("cli": : :"memory")
+#define local_irq_enable()	__asm__ __volatile__("sti": : :"memory")
+/* used in the idle loop; sti takes one instruction cycle to complete */
+#define safe_halt()		__asm__ __volatile__("sti; hlt": : :"memory")
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	!(flags & (1<<9));		\
+})
+
+/* For spinlocks etc */
+#define local_irq_save(x)	__asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory")
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+extern int es7000_plat;
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif