Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
new file mode 100644
index 0000000..5c2fcf1
--- /dev/null
+++ b/include/asm-ia64/sn/shub_mmr.h
@@ -0,0 +1,441 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/* Register "SH_IPI_INT" */
+/* SHub Inter-Processor Interrupt Registers */
+/* ==================================================================== */
+#define SH1_IPI_INT 0x0000000110000380
+#define SH2_IPI_INT 0x0000000010000380
+
+/* SH_IPI_INT_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_IPI_INT_TYPE_SHFT 0
+#define SH_IPI_INT_TYPE_MASK 0x0000000000000007
+
+/* SH_IPI_INT_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_IPI_INT_AGT_SHFT 3
+#define SH_IPI_INT_AGT_MASK 0x0000000000000008
+
+/* SH_IPI_INT_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_IPI_INT_PID_SHFT 4
+#define SH_IPI_INT_PID_MASK 0x00000000000ffff0
+
+/* SH_IPI_INT_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_IPI_INT_BASE_SHFT 21
+#define SH_IPI_INT_BASE_MASK 0x0003ffffffe00000
+
+/* SH_IPI_INT_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_IPI_INT_IDX_SHFT 52
+#define SH_IPI_INT_IDX_MASK 0x0ff0000000000000
+
+/* SH_IPI_INT_SEND */
+/* Description: Send Interrupt Message to PI, This generates a puls */
+#define SH_IPI_INT_SEND_SHFT 63
+#define SH_IPI_INT_SEND_MASK 0x8000000000000000
+
+/* ==================================================================== */
+/* Register "SH_EVENT_OCCURRED" */
+/* SHub Interrupt Event Occurred */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED 0x0000000110010000
+#define SH1_EVENT_OCCURRED_ALIAS 0x0000000110010008
+#define SH2_EVENT_OCCURRED 0x0000000010010000
+#define SH2_EVENT_OCCURRED_ALIAS 0x0000000010010008
+
+/* ==================================================================== */
+/* Register "SH_PI_CAM_CONTROL" */
+/* CRB CAM MMR Access Control */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL 0x0000000120050300
+
+/* ==================================================================== */
+/* Register "SH_SHUB_ID" */
+/* SHub ID Number */
+/* ==================================================================== */
+#define SH1_SHUB_ID 0x0000000110060580
+#define SH1_SHUB_ID_REVISION_SHFT 28
+#define SH1_SHUB_ID_REVISION_MASK 0x00000000f0000000
+
+/* ==================================================================== */
+/* Register "SH_RTC" */
+/* Real-time Clock */
+/* ==================================================================== */
+#define SH1_RTC 0x00000001101c0000
+#define SH2_RTC 0x00000002101c0000
+#define SH_RTC_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_PIO_WRITE_STATUS_0|1" */
+/* PIO Write Status for CPU 0 & 1 */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0 0x0000000120070200
+#define SH1_PIO_WRITE_STATUS_1 0x0000000120070280
+#define SH2_PIO_WRITE_STATUS_0 0x0000000020070200
+#define SH2_PIO_WRITE_STATUS_1 0x0000000020070280
+#define SH2_PIO_WRITE_STATUS_2 0x0000000020070300
+#define SH2_PIO_WRITE_STATUS_3 0x0000000020070380
+
+/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */
+/* Description: Deadlock response detected */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+
+/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */
+/* Description: Count of currently pending PIO writes */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+
+/* ==================================================================== */
+/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS 0x0000000120070208
+#define SH2_PIO_WRITE_STATUS_0_ALIAS 0x0000000020070208
+
+/* ==================================================================== */
+/* Register "SH_EVENT_OCCURRED" */
+/* SHub Interrupt Event Occurred */
+/* ==================================================================== */
+/* SH_EVENT_OCCURRED_UART_INT */
+/* Description: Pending Junk Bus UART Interrupt */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
+#define SH_EVENT_OCCURRED_UART_INT_MASK 0x0000000000100000
+
+/* SH_EVENT_OCCURRED_IPI_INT */
+/* Description: Pending IPI Interrupt */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK 0x0000000010000000
+
+/* SH_EVENT_OCCURRED_II_INT0 */
+/* Description: Pending II 0 Interrupt */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
+#define SH_EVENT_OCCURRED_II_INT0_MASK 0x0000000020000000
+
+/* SH_EVENT_OCCURRED_II_INT1 */
+/* Description: Pending II 1 Interrupt */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
+#define SH_EVENT_OCCURRED_II_INT1_MASK 0x0000000040000000
+
+/* ==================================================================== */
+/* LEDS */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
+
+/* ==================================================================== */
+/* Register "SH1_PTC_0" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH1_PTC_0 0x00000001101a0000
+
+/* SH1_PTC_0_A */
+/* Description: Type */
+#define SH1_PTC_0_A_SHFT 0
+
+/* SH1_PTC_0_PS */
+/* Description: Page Size */
+#define SH1_PTC_0_PS_SHFT 2
+
+/* SH1_PTC_0_RID */
+/* Description: Region ID */
+#define SH1_PTC_0_RID_SHFT 8
+
+/* SH1_PTC_0_START */
+/* Description: Start */
+#define SH1_PTC_0_START_SHFT 63
+
+/* ==================================================================== */
+/* Register "SH1_PTC_1" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH1_PTC_1 0x00000001101a0080
+
+/* SH1_PTC_1_START */
+/* Description: PTC_1 Start */
+#define SH1_PTC_1_START_SHFT 63
+
+
+/* ==================================================================== */
+/* Register "SH2_PTC" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH2_PTC 0x0000000170000000
+
+/* SH2_PTC_A */
+/* Description: Type */
+#define SH2_PTC_A_SHFT 0
+
+/* SH2_PTC_PS */
+/* Description: Page Size */
+#define SH2_PTC_PS_SHFT 2
+
+/* SH2_PTC_RID */
+/* Description: Region ID */
+#define SH2_PTC_RID_SHFT 4
+
+/* SH2_PTC_START */
+/* Description: Start */
+#define SH2_PTC_START_SHFT 63
+
+/* SH2_PTC_ADDR_RID */
+/* Description: Region ID */
+#define SH2_PTC_ADDR_SHFT 4
+#define SH2_PTC_ADDR_MASK 0x1ffffffffffff000
+
+/* ==================================================================== */
+/* Register "SH_RTC1_INT_CONFIG" */
+/* SHub RTC 1 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG 0x0000000110001480
+#define SH2_RTC1_INT_CONFIG 0x0000000010001480
+#define SH_RTC1_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC1_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC1_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC1_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC1_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC1_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC1_INT_CONFIG_PID_SHFT 4
+#define SH_RTC1_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC1_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC1_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC1_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC1_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC1_INT_ENABLE" */
+/* SHub RTC 1 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE 0x0000000110001500
+#define SH2_RTC1_INT_ENABLE 0x0000000010001500
+#define SH_RTC1_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC1_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */
+/* Description: Enable RTC 1 Interrupt */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK 0x0000000000000001
+
+/* ==================================================================== */
+/* Register "SH_RTC2_INT_CONFIG" */
+/* SHub RTC 2 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG 0x0000000110001580
+#define SH2_RTC2_INT_CONFIG 0x0000000010001580
+#define SH_RTC2_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC2_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC2_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC2_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC2_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC2_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC2_INT_CONFIG_PID_SHFT 4
+#define SH_RTC2_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC2_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC2_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC2_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC2_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC2_INT_ENABLE" */
+/* SHub RTC 2 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE 0x0000000110001600
+#define SH2_RTC2_INT_ENABLE 0x0000000010001600
+#define SH_RTC2_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC2_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */
+/* Description: Enable RTC 2 Interrupt */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK 0x0000000000000001
+
+/* ==================================================================== */
+/* Register "SH_RTC3_INT_CONFIG" */
+/* SHub RTC 3 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG 0x0000000110001680
+#define SH2_RTC3_INT_CONFIG 0x0000000010001680
+#define SH_RTC3_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC3_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC3_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC3_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC3_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC3_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC3_INT_CONFIG_PID_SHFT 4
+#define SH_RTC3_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC3_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC3_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC3_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC3_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC3_INT_ENABLE" */
+/* SHub RTC 3 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE 0x0000000110001700
+#define SH2_RTC3_INT_ENABLE 0x0000000010001700
+#define SH_RTC3_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC3_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */
+/* Description: Enable RTC 3 Interrupt */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK 0x0000000000000001
+
+/* SH_EVENT_OCCURRED_RTC1_INT */
+/* Description: Pending RTC 1 Interrupt */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK 0x0000000001000000
+
+/* SH_EVENT_OCCURRED_RTC2_INT */
+/* Description: Pending RTC 2 Interrupt */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK 0x0000000002000000
+
+/* SH_EVENT_OCCURRED_RTC3_INT */
+/* Description: Pending RTC 3 Interrupt */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK 0x0000000004000000
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPB" */
+/* RTC Compare Value for Processor B */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB 0x00000001101b0080
+#define SH2_INT_CMPB 0x00000000101b0080
+#define SH_INT_CMPB_MASK 0x007fffffffffffff
+#define SH_INT_CMPB_INIT 0x0000000000000000
+
+/* SH_INT_CMPB_REAL_TIME_CMPB */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPC" */
+/* RTC Compare Value for Processor C */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC 0x00000001101b0100
+#define SH2_INT_CMPC 0x00000000101b0100
+#define SH_INT_CMPC_MASK 0x007fffffffffffff
+#define SH_INT_CMPC_INIT 0x0000000000000000
+
+/* SH_INT_CMPC_REAL_TIME_CMPC */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPD" */
+/* RTC Compare Value for Processor D */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD 0x00000001101b0180
+#define SH2_INT_CMPD 0x00000000101b0180
+#define SH_INT_CMPD_MASK 0x007fffffffffffff
+#define SH_INT_CMPD_INIT 0x0000000000000000
+
+/* SH_INT_CMPD_REAL_TIME_CMPD */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK 0x007fffffffffffff
+
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR. */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */
+/* on the type of the SHUB. Do not use these #defines in performance */
+/* critical code or loops - there is a small performance penalty. */
+/* ==================================================================== */
+#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD shubmmr(SH, INT_CMPD)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */