diff --git a/include/asm-mips/mach-pb1x00/mc146818rtc.h b/include/asm-mips/mach-pb1x00/mc146818rtc.h
new file mode 100644
index 0000000..622c587
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
+#define __ASM_MACH_AU1XX_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define RTC_PORT(x)	(0x0c000000 + (x))
+#define RTC_IRQ		8
+#define PB1500_RTC_ADDR 0x0c000000
+
+static inline unsigned char CMOS_READ(unsigned long offset)
+{
+	offset <<= 2;
+	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
+{
+	offset <<= 2;
+	au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
new file mode 100644
index 0000000..50c1e41
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -0,0 +1,172 @@
+/*
+ * Alchemy Semi PB1000 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1000_H
+#define __ASM_PB1000_H
+
+/* PCMCIA PB1000 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+#define PB1000_PCR     0xBE000000
+  #define PCR_SLOT_0_VPP0  (1<<0)
+  #define PCR_SLOT_0_VPP1  (1<<1)
+  #define PCR_SLOT_0_VCC0  (1<<2)
+  #define PCR_SLOT_0_VCC1  (1<<3)
+  #define PCR_SLOT_0_RST   (1<<4)
+
+  #define PCR_SLOT_1_VPP0  (1<<8)
+  #define PCR_SLOT_1_VPP1  (1<<9)
+  #define PCR_SLOT_1_VCC0  (1<<10)
+  #define PCR_SLOT_1_VCC1  (1<<11)
+  #define PCR_SLOT_1_RST   (1<<12)
+
+#define PB1000_MDR     0xBE000004
+  #define MDR_PI        (1<<5)  /* pcmcia int latch  */
+  #define MDR_EPI      (1<<14)  /* enable pcmcia int */
+  #define MDR_CPI      (1<<15)  /* clear pcmcia int  */
+
+#define PB1000_ACR1    0xBE000008
+  #define ACR1_SLOT_0_CD1    (1<<0)  /* card detect 1     */
+  #define ACR1_SLOT_0_CD2    (1<<1)  /* card detect 2     */
+  #define ACR1_SLOT_0_READY  (1<<2)  /* ready             */
+  #define ACR1_SLOT_0_STATUS (1<<3)  /* status change     */
+  #define ACR1_SLOT_0_VS1    (1<<4)  /* voltage sense 1   */
+  #define ACR1_SLOT_0_VS2    (1<<5)  /* voltage sense 2   */
+  #define ACR1_SLOT_0_INPACK (1<<6)  /* inpack pin status */
+  #define ACR1_SLOT_1_CD1    (1<<8)  /* card detect 1     */
+  #define ACR1_SLOT_1_CD2    (1<<9)  /* card detect 2     */
+  #define ACR1_SLOT_1_READY  (1<<10) /* ready             */
+  #define ACR1_SLOT_1_STATUS (1<<11) /* status change     */
+  #define ACR1_SLOT_1_VS1    (1<<12) /* voltage sense 1   */
+  #define ACR1_SLOT_1_VS2    (1<<13) /* voltage sense 2   */
+  #define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
+
+#define CPLD_AUX0      0xBE00000C
+#define CPLD_AUX1      0xBE000010
+#define CPLD_AUX2      0xBE000014
+
+/* Voltage levels */
+
+/* VPPEN1 - VPPEN0 */
+#define VPP_GND ((0<<1) | (0<<0))
+#define VPP_5V  ((1<<1) | (0<<0))
+#define VPP_3V  ((0<<1) | (1<<0))
+#define VPP_12V ((0<<1) | (1<<0))
+#define VPP_HIZ ((1<<1) | (1<<0))
+
+/* VCCEN1 - VCCEN0 */
+#define VCC_3V  ((0<<1) | (1<<0))
+#define VCC_5V  ((1<<1) | (0<<0))
+#define VCC_HIZ ((0<<1) | (0<<0))
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+
+/* PCI PB1000 specific defines */
+/* The reason these defines are here instead of au1000.h is because
+ * the Au1000 does not have a PCI bus controller so the PCI implementation
+ * on the some of the older Pb1000 boards was very board specific.
+ */
+#define PCI_CONFIG_BASE   0xBA020000 /* the only external slot */
+
+#define SDRAM_DEVID       0xBA010000
+#define SDRAM_CMD         0xBA010004
+#define SDRAM_CLASS       0xBA010008
+#define SDRAM_MISC        0xBA01000C
+#define SDRAM_MBAR        0xBA010010
+
+#define PCI_IO_DATA_PORT  0xBA800000
+
+#define PCI_IO_ADDR       0xBE00001C
+#define PCI_INT_ACK       0xBBC00000
+#define PCI_IO_READ       0xBBC00020
+#define PCI_IO_WRITE      0xBBC00030
+
+#define PCI_BRIDGE_CONFIG 0xBE000018
+
+#define PCI_IO_START      0x10000000
+#define PCI_IO_END        0x1000ffff
+#define PCI_MEM_START     0x18000000
+#define PCI_MEM_END       0x18ffffff
+
+#define PCI_FIRST_DEVFN   0
+#define PCI_LAST_DEVFN    1
+
+static inline u8 au_pci_io_readb(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
+	return (readl(PCI_IO_DATA_PORT) & 0xff);
+}
+
+static inline u16 au_pci_io_readw(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
+	return (readl(PCI_IO_DATA_PORT) & 0xffff);
+}
+
+static inline u32 au_pci_io_readl(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
+	return readl(PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writeb(u8 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writew(u16 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writel(u32 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void set_sdram_extbyte(void)
+{
+	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
+}
+
+static inline void set_slot_extbyte(void)
+{
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
+}
+#endif /* __ASM_PB1000_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h
new file mode 100644
index 0000000..4c5a1cd
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi PB1100 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT          0xAE000000
+#define BOARD_STATUS_REG      0xAE000004
+  #define PB1100_ROM_SEL         (1<<15)
+  #define PB1100_ROM_SIZ         (1<<14)
+  #define PB1100_SWAP_BOOT       (1<<13)
+  #define PB1100_FLASH_WP        (1<<12)
+  #define PB1100_ROM_H_STS       (1<<11)
+  #define PB1100_ROM_L_STS       (1<<10)
+  #define PB1100_FLASH_H_STS      (1<<9)
+  #define PB1100_FLASH_L_STS      (1<<8)
+  #define PB1100_SRAM_SIZ         (1<<7)
+  #define PB1100_TSC_BUSY         (1<<6)
+  #define PB1100_PCMCIA_VS_MASK   (3<<4)
+  #define PB1100_RS232_CD         (1<<3)
+  #define PB1100_RS232_CTS        (1<<2)
+  #define PB1100_RS232_DSR        (1<<1)
+  #define PB1100_RS232_RI         (1<<0)
+
+#define PB1100_IRDA_RS232     0xAE00000C
+  #define PB1100_IRDA_FULL       (0<<14) /* full power */
+  #define PB1100_IRDA_SHUTDOWN   (1<<14)
+  #define PB1100_IRDA_TT         (2<<14) /* 2/3 power */
+  #define PB1100_IRDA_OT         (3<<14) /* 1/3 power */
+  #define PB1100_IRDA_FIR        (1<<13)
+
+#define PCMCIA_BOARD_REG     0xAE000010
+  #define PB1100_SD_WP1_RO       (1<<15) /* read only */
+  #define PB1100_SD_WP0_RO       (1<<14) /* read only */
+  #define PB1100_SD_PWR1         (1<<11) /* applies power to SD1 */
+  #define PB1100_SD_PWR0         (1<<10) /* applies power to SD0 */
+  #define PB1100_SEL_SD_CONN1     (1<<9)
+  #define PB1100_SEL_SD_CONN0     (1<<8)
+  #define PC_DEASSERT_RST         (1<<7)
+  #define PC_DRV_EN               (1<<4)
+
+#define PB1100_G_CONTROL      0xAE000014 /* graphics control */
+
+#define PB1100_RST_VDDI       0xAE00001C
+  #define PB1100_SOFT_RESET      (1<<15) /* clear to reset the board */
+  #define PB1100_VDDI_MASK        (0x1F)
+
+#define PB1100_LEDS           0xAE000018
+
+/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED        0xAE000018
+
+/* PCMCIA PB1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1100_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h
new file mode 100644
index 0000000..d6c77974
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1500.h
@@ -0,0 +1,51 @@
+/*
+ * Alchemy Semi PB1500 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+
+#define IDENT_BOARD_REG           0xAE000000
+#define BOARD_STATUS_REG          0xAE000004
+#define PCI_BOARD_REG             0xAE000010
+#define PCMCIA_BOARD_REG          0xAE000010
+  #define PC_DEASSERT_RST               0x80
+  #define PC_DRV_EN                     0x10 
+#define PB1500_G_CONTROL          0xAE000014
+#define PB1500_RST_VDDI           0xAE00001C
+#define PB1500_LEDS               0xAE000018
+  
+#define PB1500_HEX_LED            0xAF000004
+#define PB1500_HEX_LED_BLANK      0xAF000008
+
+/* PCMCIA PB1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1500_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
new file mode 100644
index 0000000..431d608
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -0,0 +1,169 @@
+/*
+ * AMD Alchemy Semi PB1550 Referrence Board
+ * Board Registers defines.
+ *
+ * Copyright 2004 Embedded Edge LLC.
+ * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1550_H
+#define __ASM_PB1550_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE        PSC0_BASE_ADDR
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE      PSC2_BASE_ADDR
+#define I2S_PSC_BASE        PSC3_BASE_ADDR
+
+#define BCSR_PHYS_ADDR 0xAF000000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 pci;
+		u16 reserved5;
+	/*18*/	u16 leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_PCMCIA0FI	0x0010
+#define BCSR_STATUS_PCMCIA1FI	0x0020
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH	0x0080
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_ROMBUSY	0x0200
+#define BCSR_STATUS_USBOTGID	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+#define BCSR_STATUS_U3RXD	0x8000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_PHY0	0x0001
+#define BCSR_RESETS_PHY1	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_WSC		0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_DMAREQ	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_PCI_M66EN		0x0001
+#define BCSR_PCI_M33		0x0100
+#define BCSR_PCI_EXTERNARB	0x0200
+#define BCSR_PCI_GPIO200RST	0x0400
+#define BCSR_PCI_CLKOUT		0x0800
+#define BCSR_PCI_CFGHOST	0x1000
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_USER_ONLY
+#endif
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H			(18 >> 2)
+#define NAND_T_PUL			(30 >> 2)
+#define NAND_T_SU			(30 >> 2)
+#define NAND_T_WH			(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
+			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
+			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
+			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+
+#endif /* __ASM_PB1550_H */