Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h
new file mode 100644
index 0000000..2c05696
--- /dev/null
+++ b/include/asm-ppc/elf.h
@@ -0,0 +1,160 @@
+#ifndef __PPC_ELF_H
+#define __PPC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE 0
+#define R_PPC_ADDR32 1 /* 32bit absolute address */
+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
+#define R_PPC_ADDR16 3 /* 16bit absolute address */
+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN 8
+#define R_PPC_ADDR14_BRNTAKEN 9
+#define R_PPC_REL24 10 /* PC relative 26 bit */
+#define R_PPC_REL14 11 /* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN 12
+#define R_PPC_REL14_BRNTAKEN 13
+#define R_PPC_GOT16 14
+#define R_PPC_GOT16_LO 15
+#define R_PPC_GOT16_HI 16
+#define R_PPC_GOT16_HA 17
+#define R_PPC_PLTREL24 18
+#define R_PPC_COPY 19
+#define R_PPC_GLOB_DAT 20
+#define R_PPC_JMP_SLOT 21
+#define R_PPC_RELATIVE 22
+#define R_PPC_LOCAL24PC 23
+#define R_PPC_UADDR32 24
+#define R_PPC_UADDR16 25
+#define R_PPC_REL32 26
+#define R_PPC_PLT32 27
+#define R_PPC_PLTREL32 28
+#define R_PPC_PLT16_LO 29
+#define R_PPC_PLT16_HI 30
+#define R_PPC_PLT16_HA 31
+#define R_PPC_SDAREL16 32
+#define R_PPC_SECTOFF 33
+#define R_PPC_SECTOFF_LO 34
+#define R_PPC_SECTOFF_HI 35
+#define R_PPC_SECTOFF_HA 36
+/* Keep this the last entry. */
+#define R_PPC_NUM 37
+
+#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */
+#define ELF_NFPREG 33 /* includes fpscr */
+#define ELF_NVRREG 33 /* includes vscr */
+#define ELF_NEVRREG 34 /* includes acc (as 2) */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH EM_PPC
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PPC)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_CORE_COPY_REGS(gregs, regs) \
+ memcpy((gregs), (regs), sizeof(struct pt_regs)); \
+ memset((char *)(gregs) + sizeof(struct pt_regs), 0, \
+ sizeof(elf_gregset_t) - sizeof(struct pt_regs));
+
+#define ELF_CORE_COPY_TASK_REGS(t, elfregs) \
+ ((t)->thread.regs? \
+ ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0)
+
+extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
+#define ELF_CORE_COPY_FPREGS(t, fpu) dump_task_fpu((t), (fpu))
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. This could be done in userspace,
+ but it's not easy, and we've already done it here. */
+
+#define ELF_HWCAP (cur_cpu_spec[0]->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo.
+
+ For the moment, we have only optimizations for the Intel generations,
+ but that could change... */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE 19
+#define AT_ICACHEBSIZE 20
+#define AT_UCACHEBSIZE 21
+/* A special ignored type value for PPC, for glibc compatibility. */
+#define AT_IGNOREPPC 22
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ * AUXV is greater than 16 for glibc compatibility.
+ * AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ * even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ */
+#define ARCH_DLINFO \
+do { \
+ /* Handle glibc compatibility. */ \
+ NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \
+ NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \
+ /* Cache size items */ \
+ NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \
+ NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \
+ NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \
+ } while (0)
+
+#endif /* __KERNEL__ */
+#endif