Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-sh/microdev/io.h b/include/asm-sh/microdev/io.h
new file mode 100644
index 0000000..f2ca4ac
--- /dev/null
+++ b/include/asm-sh/microdev/io.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-sh/io_microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * IO functions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+
+#ifndef _ASM_SH_IO_MICRODEV_H
+#define _ASM_SH_IO_MICRODEV_H
+
+extern unsigned long microdev_isa_port2addr(unsigned long offset);
+
+extern unsigned char microdev_inb(unsigned long port);
+extern unsigned short microdev_inw(unsigned long port);
+extern unsigned int microdev_inl(unsigned long port);
+
+extern void microdev_outb(unsigned char value, unsigned long port);
+extern void microdev_outw(unsigned short value, unsigned long port);
+extern void microdev_outl(unsigned int value, unsigned long port);
+
+extern unsigned char microdev_inb_p(unsigned long port);
+extern unsigned short microdev_inw_p(unsigned long port);
+extern unsigned int microdev_inl_p(unsigned long port);
+
+extern void microdev_outb_p(unsigned char value, unsigned long port);
+extern void microdev_outw_p(unsigned short value, unsigned long port);
+extern void microdev_outl_p(unsigned int value, unsigned long port);
+
+extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
+extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
+extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
+
+extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
+
+#if defined(CONFIG_PCI)
+extern unsigned char microdev_pci_inb(unsigned long port);
+extern unsigned short microdev_pci_inw(unsigned long port);
+extern unsigned long microdev_pci_inl(unsigned long port);
+extern void microdev_pci_outb(unsigned char data, unsigned long port);
+extern void microdev_pci_outw(unsigned short data, unsigned long port);
+extern void microdev_pci_outl(unsigned long data, unsigned long port);
+#endif
+
+#endif /* _ASM_SH_IO_MICRODEV_H */
+
diff --git a/include/asm-sh/microdev/irq.h b/include/asm-sh/microdev/irq.h
new file mode 100644
index 0000000..47f6f77
--- /dev/null
+++ b/include/asm-sh/microdev/irq.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/asm-sh/irq_microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * IRQ functions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+
+#ifndef _ASM_SH_IRQ_MICRODEV_H
+#define _ASM_SH_IRQ_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+
+ /*
+ * The following are useful macros for manipulating the
+ * interrupt controller (INTC) on the CPU-board FPGA.
+ * It should be noted that there is an INTC on the FPGA,
+ * and a seperate INTC on the SH4-202 core - these are
+ * two different things, both of which need to be prorammed
+ * to correctly route - unfortunately, they have the
+ * same name and abbreviations!
+ */
+#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
+#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interupt mask to enable/disable INTC in CPU-board FPGA */
+#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+ /*
+ * The following are the IRQ numbers for the Linux Kernel for external interrupts.
+ * i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
+
+ /*
+ * The following are the IRQ numbers for the INTC on the FPGA for external interrupts.
+ * i.e. the bits in the INTC registers in the FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA 8
+#define MICRODEV_IRQ_PCI_INTB 9
+#define MICRODEV_IRQ_PCI_INTC 10
+#define MICRODEV_IRQ_PCI_INTD 11
+
+#endif /* _ASM_SH_IRQ_MICRODEV_H */