Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
new file mode 100644
index 0000000..2ed8c58
--- /dev/null
+++ b/include/linux/mtd/cfi.h
@@ -0,0 +1,394 @@
+
+/* Common Flash Interface structures
+ * See http://support.intel.com/design/flash/technote/index.htm
+ * $Id: cfi.h,v 1.50 2004/11/20 12:46:51 dwmw2 Exp $
+ */
+
+#ifndef __MTD_CFI_H__
+#define __MTD_CFI_H__
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi_endian.h>
+
+#ifdef CONFIG_MTD_CFI_I1
+#define cfi_interleave(cfi) 1
+#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1)
+#else
+#define cfi_interleave_is_1(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I2
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 2
+# endif
+#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2)
+#else
+#define cfi_interleave_is_2(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I4
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 4
+# endif
+#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4)
+#else
+#define cfi_interleave_is_4(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I8
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 8
+# endif
+#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8)
+#else
+#define cfi_interleave_is_8(cfi) (0)
+#endif
+
+static inline int cfi_interleave_supported(int i)
+{
+ switch (i) {
+#ifdef CONFIG_MTD_CFI_I1
+ case 1:
+#endif
+#ifdef CONFIG_MTD_CFI_I2
+ case 2:
+#endif
+#ifdef CONFIG_MTD_CFI_I4
+ case 4:
+#endif
+#ifdef CONFIG_MTD_CFI_I8
+ case 8:
+#endif
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+
+/* NB: these values must represents the number of bytes needed to meet the
+ * device type (x8, x16, x32). Eg. a 32 bit device is 4 x 8 bytes.
+ * These numbers are used in calculations.
+ */
+#define CFI_DEVICETYPE_X8 (8 / 8)
+#define CFI_DEVICETYPE_X16 (16 / 8)
+#define CFI_DEVICETYPE_X32 (32 / 8)
+#define CFI_DEVICETYPE_X64 (64 / 8)
+
+/* NB: We keep these structures in memory in HOST byteorder, except
+ * where individually noted.
+ */
+
+/* Basic Query Structure */
+struct cfi_ident {
+ uint8_t qry[3];
+ uint16_t P_ID;
+ uint16_t P_ADR;
+ uint16_t A_ID;
+ uint16_t A_ADR;
+ uint8_t VccMin;
+ uint8_t VccMax;
+ uint8_t VppMin;
+ uint8_t VppMax;
+ uint8_t WordWriteTimeoutTyp;
+ uint8_t BufWriteTimeoutTyp;
+ uint8_t BlockEraseTimeoutTyp;
+ uint8_t ChipEraseTimeoutTyp;
+ uint8_t WordWriteTimeoutMax;
+ uint8_t BufWriteTimeoutMax;
+ uint8_t BlockEraseTimeoutMax;
+ uint8_t ChipEraseTimeoutMax;
+ uint8_t DevSize;
+ uint16_t InterfaceDesc;
+ uint16_t MaxBufWriteSize;
+ uint8_t NumEraseRegions;
+ uint32_t EraseRegionInfo[0]; /* Not host ordered */
+} __attribute__((packed));
+
+/* Extended Query Structure for both PRI and ALT */
+
+struct cfi_extquery {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */
+
+struct cfi_pri_intelext {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature
+ block follows - FIXME - not currently supported */
+ uint8_t SuspendCmdSupport;
+ uint16_t BlkStatusRegMask;
+ uint8_t VccOptimal;
+ uint8_t VppOptimal;
+ uint8_t NumProtectionFields;
+ uint16_t ProtRegAddr;
+ uint8_t FactProtRegSize;
+ uint8_t UserProtRegSize;
+ uint8_t extra[0];
+} __attribute__((packed));
+
+struct cfi_intelext_blockinfo {
+ uint16_t NumIdentBlocks;
+ uint16_t BlockSize;
+ uint16_t MinBlockEraseCycles;
+ uint8_t BitsPerCell;
+ uint8_t BlockCap;
+} __attribute__((packed));
+
+struct cfi_intelext_regioninfo {
+ uint16_t NumIdentPartitions;
+ uint8_t NumOpAllowed;
+ uint8_t NumOpAllowedSimProgMode;
+ uint8_t NumOpAllowedSimEraMode;
+ uint8_t NumBlockTypes;
+ struct cfi_intelext_blockinfo BlockTypes[1];
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */
+
+struct cfi_pri_amdstd {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
+ uint8_t EraseSuspend;
+ uint8_t BlkProt;
+ uint8_t TmpBlkUnprotect;
+ uint8_t BlkProtUnprot;
+ uint8_t SimultaneousOps;
+ uint8_t BurstMode;
+ uint8_t PageMode;
+ uint8_t VppMin;
+ uint8_t VppMax;
+ uint8_t TopBottom;
+} __attribute__((packed));
+
+struct cfi_pri_query {
+ uint8_t NumFields;
+ uint32_t ProtField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+struct cfi_bri_query {
+ uint8_t PageModeReadCap;
+ uint8_t NumFields;
+ uint32_t ConfField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+#define P_ID_NONE 0x0000
+#define P_ID_INTEL_EXT 0x0001
+#define P_ID_AMD_STD 0x0002
+#define P_ID_INTEL_STD 0x0003
+#define P_ID_AMD_EXT 0x0004
+#define P_ID_WINBOND 0x0006
+#define P_ID_ST_ADV 0x0020
+#define P_ID_MITSUBISHI_STD 0x0100
+#define P_ID_MITSUBISHI_EXT 0x0101
+#define P_ID_SST_PAGE 0x0102
+#define P_ID_INTEL_PERFORMANCE 0x0200
+#define P_ID_INTEL_DATA 0x0210
+#define P_ID_RESERVED 0xffff
+
+
+#define CFI_MODE_CFI 1
+#define CFI_MODE_JEDEC 0
+
+struct cfi_private {
+ uint16_t cmdset;
+ void *cmdset_priv;
+ int interleave;
+ int device_type;
+ int cfi_mode; /* Are we a JEDEC device pretending to be CFI? */
+ int addr_unlock1;
+ int addr_unlock2;
+ struct mtd_info *(*cmdset_setup)(struct map_info *);
+ struct cfi_ident *cfiq; /* For now only one. We insist that all devs
+ must be of the same type. */
+ int mfr, id;
+ int numchips;
+ unsigned long chipshift; /* Because they're of the same type */
+ const char *im_name; /* inter_module name for cmdset_setup */
+ struct flchip chips[0]; /* per-chip data structure for each chip */
+};
+
+/*
+ * Returns the command address according to the given geometry.
+ */
+static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int type)
+{
+ return (cmd_ofs * type) * interleave;
+}
+
+/*
+ * Transforms the CFI command for the given geometry (bus width & interleave).
+ * It looks too long to be inline, but in the common case it should almost all
+ * get optimised away.
+ */
+static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cfi_private *cfi)
+{
+ map_word val = { {0} };
+ int wordwidth, words_per_bus, chip_mode, chips_per_word;
+ unsigned long onecmd;
+ int i;
+
+ /* We do it this way to give the compiler a fighting chance
+ of optimising away all the crap for 'bankwidth' larger than
+ an unsigned long, in the common case where that support is
+ disabled */
+ if (map_bankwidth_is_large(map)) {
+ wordwidth = sizeof(unsigned long);
+ words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+ } else {
+ wordwidth = map_bankwidth(map);
+ words_per_bus = 1;
+ }
+
+ chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+ chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+ /* First, determine what the bit-pattern should be for a single
+ device, according to chip mode and endianness... */
+ switch (chip_mode) {
+ default: BUG();
+ case 1:
+ onecmd = cmd;
+ break;
+ case 2:
+ onecmd = cpu_to_cfi16(cmd);
+ break;
+ case 4:
+ onecmd = cpu_to_cfi32(cmd);
+ break;
+ }
+
+ /* Now replicate it across the size of an unsigned long, or
+ just to the bus width as appropriate */
+ switch (chips_per_word) {
+ default: BUG();
+#if BITS_PER_LONG >= 64
+ case 8:
+ onecmd |= (onecmd << (chip_mode * 32));
+#endif
+ case 4:
+ onecmd |= (onecmd << (chip_mode * 16));
+ case 2:
+ onecmd |= (onecmd << (chip_mode * 8));
+ case 1:
+ ;
+ }
+
+ /* And finally, for the multi-word case, replicate it
+ in all words in the structure */
+ for (i=0; i < words_per_bus; i++) {
+ val.x[i] = onecmd;
+ }
+
+ return val;
+}
+#define CMD(x) cfi_build_cmd((x), map, cfi)
+
+/*
+ * Sends a CFI command to a bank of flash for the given geometry.
+ *
+ * Returns the offset in flash where the command was written.
+ * If prev_val is non-null, it will be set to the value at the command address,
+ * before the command was written.
+ */
+static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+ struct map_info *map, struct cfi_private *cfi,
+ int type, map_word *prev_val)
+{
+ map_word val;
+ uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, cfi_interleave(cfi), type);
+
+ val = cfi_build_cmd(cmd, map, cfi);
+
+ if (prev_val)
+ *prev_val = map_read(map, addr);
+
+ map_write(map, val, addr);
+
+ return addr - base;
+}
+
+static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
+{
+ map_word val = map_read(map, addr);
+
+ if (map_bankwidth_is_1(map)) {
+ return val.x[0];
+ } else if (map_bankwidth_is_2(map)) {
+ return cfi16_to_cpu(val.x[0]);
+ } else {
+ /* No point in a 64-bit byteswap since that would just be
+ swapping the responses from different chips, and we are
+ only interested in one chip (a representative sample) */
+ return cfi32_to_cpu(val.x[0]);
+ }
+}
+
+static inline void cfi_udelay(int us)
+{
+ if (us >= 1000) {
+ msleep((us+999)/1000);
+ } else {
+ udelay(us);
+ cond_resched();
+ }
+}
+
+static inline void cfi_spin_lock(spinlock_t *mutex)
+{
+ spin_lock_bh(mutex);
+}
+
+static inline void cfi_spin_unlock(spinlock_t *mutex)
+{
+ spin_unlock_bh(mutex);
+}
+
+struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
+ const char* name);
+struct cfi_fixup {
+ uint16_t mfr;
+ uint16_t id;
+ void (*fixup)(struct mtd_info *mtd, void* param);
+ void* param;
+};
+
+#define CFI_MFR_ANY 0xffff
+#define CFI_ID_ANY 0xffff
+
+#define CFI_MFR_AMD 0x0001
+#define CFI_MFR_ST 0x0020 /* STMicroelectronics */
+
+void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
+
+typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip,
+ unsigned long adr, int len, void *thunk);
+
+int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
+ loff_t ofs, size_t len, void *thunk);
+
+
+#endif /* __MTD_CFI_H__ */