diff --git a/sound/oss/sgalaxy.c b/sound/oss/sgalaxy.c
new file mode 100644
index 0000000..3f32d46
--- /dev/null
+++ b/sound/oss/sgalaxy.c
@@ -0,0 +1,207 @@
+/*
+ * sound/sgalaxy.c
+ *
+ * Low level driver for Aztech Sound Galaxy cards.
+ * Copyright 1998 Artur Skawina <skawina@geocities.com>
+ *
+ * Supported cards:
+ *    Aztech Sound Galaxy Waverider Pro 32 - 3D
+ *    Aztech Sound Galaxy Washington 16
+ *
+ * Based on cs4232.c by Hannu Savolainen and Alan Cox.
+ *
+ *
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ *
+ * Changes:
+ * 11-10-2000	Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
+ *		Added __init to sb_rst() and sb_cmd()
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "sound_config.h"
+#include "ad1848.h"
+
+static void sleep( unsigned howlong )
+{
+	current->state   = TASK_INTERRUPTIBLE;
+	schedule_timeout(howlong);
+}
+
+#define DPORT 0x80
+
+/* Sound Blaster regs */
+
+#define SBDSP_RESET      0x6
+#define SBDSP_READ       0xA
+#define SBDSP_COMMAND    0xC
+#define SBDSP_STATUS     SBDSP_COMMAND
+#define SBDSP_DATA_AVAIL 0xE
+
+static int __init sb_rst(int base)
+{
+	int   i;
+   
+	outb( 1, base+SBDSP_RESET );     /* reset the DSP */
+	outb( 0, base+SBDSP_RESET );
+    
+	for ( i=0; i<500; i++ )          /* delay */
+		inb(DPORT);
+      
+	for ( i=0; i<100000; i++ )
+	{
+		if ( inb( base+SBDSP_DATA_AVAIL )&0x80 )
+			break;
+	}
+
+	if ( inb( base+SBDSP_READ )!=0xAA )
+		return 0;
+
+	return 1;
+}
+
+static int __init sb_cmd( int base, unsigned char val )
+{
+	int  i;
+
+	for ( i=100000; i; i-- )
+	{
+		if ( (inb( base+SBDSP_STATUS )&0x80)==0 )
+		{
+        		outb( val, base+SBDSP_COMMAND );
+        		break;
+		}
+	}
+	return i;      /* i>0 == success */
+}
+
+
+#define ai_sgbase    driver_use_1
+
+static int __init probe_sgalaxy( struct address_info *ai )
+{
+	struct resource *ports;
+	int n;
+
+	if (!request_region(ai->io_base, 4, "WSS config")) {
+		printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base);
+		return 0;
+	}
+
+	ports = request_region(ai->io_base + 4, 4, "ad1848");
+	if (!ports) {
+		printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base);
+		release_region(ai->io_base, 4);
+		return 0;
+	}
+
+	if (!request_region( ai->ai_sgbase, 0x10, "SoundGalaxy SB")) {
+		printk(KERN_ERR "sgalaxy: SB IO port 0x%03x not available\n", ai->ai_sgbase);
+		release_region(ai->io_base + 4, 4);
+		release_region(ai->io_base, 4);
+		return 0;
+	}
+        
+	if (ad1848_detect(ports, NULL, ai->osp))
+		goto out;  /* The card is already active, check irq etc... */
+        
+	/* switch to MSS/WSS mode */
+   
+	sb_rst( ai->ai_sgbase );
+   
+	sb_cmd( ai->ai_sgbase, 9 );
+	sb_cmd( ai->ai_sgbase, 0 );
+
+	sleep( HZ/10 );
+
+out:
+      	if (!probe_ms_sound(ai, ports)) {
+		release_region(ai->io_base + 4, 4);
+		release_region(ai->io_base, 4);
+		release_region(ai->ai_sgbase, 0x10);
+		return 0;
+	}
+
+	attach_ms_sound(ai, ports, THIS_MODULE);
+	n=ai->slots[0];
+	
+	if (n!=-1 && audio_devs[n]->mixer_dev != -1 ) {
+		AD1848_REROUTE( SOUND_MIXER_LINE1, SOUND_MIXER_LINE );   /* Line-in */
+		AD1848_REROUTE( SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH );  /* FM+Wavetable*/
+		AD1848_REROUTE( SOUND_MIXER_LINE3, SOUND_MIXER_CD );     /* CD */
+	}
+	return 1;
+}
+
+static void __exit unload_sgalaxy( struct address_info *ai )
+{
+	unload_ms_sound( ai );
+	release_region( ai->ai_sgbase, 0x10 );
+}
+
+static struct address_info cfg;
+
+static int __initdata io	= -1;
+static int __initdata irq	= -1;
+static int __initdata dma	= -1;
+static int __initdata dma2	= -1;
+static int __initdata sgbase	= -1;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(dma, int, 0);
+module_param(dma2, int, 0);
+module_param(sgbase, int, 0);
+
+static int __init init_sgalaxy(void)
+{
+	cfg.io_base   = io;
+	cfg.irq       = irq;
+	cfg.dma       = dma;
+	cfg.dma2      = dma2;
+	cfg.ai_sgbase = sgbase;
+
+	if (cfg.io_base == -1 || cfg.irq == -1 || cfg.dma == -1 || cfg.ai_sgbase == -1 ) {
+		printk(KERN_ERR "sgalaxy: io, irq, dma and sgbase must be set.\n");
+		return -EINVAL;
+	}
+
+	if ( probe_sgalaxy(&cfg) == 0 )
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __exit cleanup_sgalaxy(void)
+{
+	unload_sgalaxy(&cfg);
+}
+
+module_init(init_sgalaxy);
+module_exit(cleanup_sgalaxy);
+
+#ifndef MODULE
+static int __init setup_sgalaxy(char *str)
+{
+	/* io, irq, dma, dma2, sgbase */
+	int ints[6];
+	
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+	io	= ints[1];
+	irq	= ints[2];
+	dma	= ints[3];
+	dma2	= ints[4];
+	sgbase	= ints[5];
+
+	return 1;
+}
+
+__setup("sgalaxy=", setup_sgalaxy);
+#endif
+MODULE_LICENSE("GPL");