[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver
b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
new file mode 100644
index 0000000..b3dd16f
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#include "stv0299.h"
+#include "mt352.h"
+#include "nxt2002.h"
+#include "stv0297.h"
+#include "mt312.h"
+
+/* lnb control */
+
+static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ deb_tuner("polarity/voltage = %u\n", voltage);
+
+ v = fc->read_ibi_reg(fc, misc_204);
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ v.misc_204.ACPI1_sig = 1;
+ break;
+ case SEC_VOLTAGE_13:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 0;
+ break;
+ case SEC_VOLTAGE_18:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 1;
+ break;
+ default:
+ err("unknown SEC_VOLTAGE value");
+ return -EINVAL;
+ }
+ return fc->write_ibi_reg(fc, misc_204, v);
+}
+
+static int flexcop_sleep(struct dvb_frontend* fe)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
+
+ if (fc->fe_sleep)
+ return fc->fe_sleep(fe);
+
+/* v.misc_204.ACPI3_sig = 1;
+ fc->write_ibi_reg(fc,misc_204,v);*/
+
+ return 0;
+}
+
+static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ u16 ax;
+ v.raw = 0;
+
+ deb_tuner("tone = %u\n",tone);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ ax = 0x01ff;
+ break;
+ case SEC_TONE_OFF:
+ ax = 0;
+ break;
+ default:
+ err("unknown SEC_TONE value");
+ return -EINVAL;
+ }
+
+ v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
+
+ v.lnb_switch_freq_200.LNB_CTLHighCount_sig =
+ v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax;
+
+ return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
+}
+
+static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
+{
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ udelay(data ? 500 : 1000);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ udelay(data ? 1000 : 500);
+}
+
+static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
+{
+ int i, par = 1, d;
+
+ for (i = 7; i >= 0; i--) {
+ d = (data >> i) & 1;
+ par ^= d;
+ flexcop_diseqc_send_bit(fe, d);
+ }
+
+ flexcop_diseqc_send_bit(fe, par);
+}
+
+static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+{
+ int i;
+
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ mdelay(16);
+
+ for (i = 0; i < len; i++)
+ flexcop_diseqc_send_byte(fe,msg[i]);
+
+ mdelay(16);
+
+ if (burst != -1) {
+ if (burst)
+ flexcop_diseqc_send_byte(fe, 0xff);
+ else {
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ udelay(12500);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ }
+ msleep(20);
+ }
+ return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
+}
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
+}
+
+/* dvb-s stv0299 */
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct flexcop_device *fc = fe->dvb->priv;
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; /* 0xC4 */
+ buf[3] = 0x08;
+
+ if (params->frequency < 1500000) buf[3] |= 0x10;
+
+ if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x35,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0xC3,
+ 0x0C, 0x00,
+ 0x0D, 0x81,
+ 0x0E, 0x23,
+ 0x0F, 0x12,
+ 0x10, 0x7E,
+ 0x11, 0x84,
+ 0x12, 0xB9,
+ 0x13, 0x88,
+ 0x14, 0x89,
+ 0x15, 0xC9,
+ 0x16, 0x00,
+ 0x17, 0x5C,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1A, 0x00,
+ 0x1C, 0x00,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x3A,
+ 0x20, 0x2E,
+ 0x21, 0x80,
+ 0x22, 0xFF,
+ 0x23, 0xC1,
+ 0x28, 0x00,
+ 0x29, 0x1E,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFE,
+ 0x34, 0x93,
+ 0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_tbmu24112_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+ .pll_set = samsung_tbmu24112_pll_set,
+};
+
+/* dvb-t mt352 */
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+ u32 div;
+ unsigned char bs = 0;
+
+ #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+ if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+ if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+ pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = 0xcc;
+ pllbuf[4] = bs;
+
+ return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+ .demod_address = 0x0f,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+ .pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ return request_firmware(fw, name, fc->dev);
+}
+
+static struct nxt2002_config samsung_tbmv_config = {
+ .demod_address = 0x0a,
+ .request_firmware = nxt2002_request_firmware,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct flexcop_device *fc = fe->dvb->priv;
+
+ div = (params->frequency + (125/2)) / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+ buf[2] = 0x84 | ((div >> 10) & 0x60);
+ buf[3] = 0x80;
+
+ if (params->frequency < 1550000)
+ buf[3] |= 0x02;
+
+ if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+ .demod_address = 0x0e,
+ .pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
+
+static struct stv0297_config alps_tdee4_stv0297_config = {
+ .demod_address = 0x1c,
+// .invert = 1,
+// .pll_set = alps_tdee4_stv0297_pll_set,
+};
+
+/* try to figure out the frontend, each card/box can have on of the following list */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+ /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
+ if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
+ fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+ fc->fe_sleep = fc->fe->ops->sleep;
+ fc->fe->ops->sleep = flexcop_sleep;
+
+ fc->dev_type = FC_SKY;
+ info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
+ } else
+ /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
+ if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
+ fc->dev_type = FC_AIR_DVB;
+ info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
+ } else
+ /* try the air atsc (nxt2002) */
+ if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+ fc->dev_type = FC_AIR_ATSC;
+ info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
+ } else
+ /* try the cable dvb (stv0297) */
+ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+ fc->dev_type = FC_CABLE;
+ info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
+ } else
+ /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
+ if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+ fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
+ fc->fe->ops->set_tone = flexcop_set_tone;
+ fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+ fc->fe_sleep = fc->fe->ops->sleep;
+ fc->fe->ops->sleep = flexcop_sleep;
+
+ fc->dev_type = FC_SKY_OLD;
+ info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
+ }
+
+ if (fc->fe == NULL) {
+ err("no frontend driver found for this B2C2/FlexCop adapter");
+ return -ENODEV;
+ } else {
+ if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+ err("frontend registration failed!");
+ if (fc->fe->ops->release != NULL)
+ fc->fe->ops->release(fc->fe);
+ fc->fe = NULL;
+ return -EINVAL;
+ }
+ }
+ fc->init_state |= FC_STATE_FE_INIT;
+ return 0;
+}
+
+void flexcop_frontend_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_FE_INIT)
+ dvb_unregister_frontend(fc->fe);
+
+ fc->init_state &= ~FC_STATE_FE_INIT;
+}