| /* | 
 |  *   olympic.c (c) 1999 Peter De Schrijver All Rights Reserved | 
 |  *		   1999/2000 Mike Phillips (mikep@linuxtr.net) | 
 |  * | 
 |  *  Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic | 
 |  *  chipset.  | 
 |  * | 
 |  *  Base Driver Skeleton: | 
 |  *      Written 1993-94 by Donald Becker. | 
 |  * | 
 |  *      Copyright 1993 United States Government as represented by the | 
 |  *      Director, National Security Agency. | 
 |  * | 
 |  *  Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their  | 
 |  *  assistance and perserverance with the testing of this driver. | 
 |  * | 
 |  *  This software may be used and distributed according to the terms | 
 |  *  of the GNU General Public License, incorporated herein by reference. | 
 |  *  | 
 |  *  4/27/99 - Alpha Release 0.1.0 | 
 |  *            First release to the public | 
 |  * | 
 |  *  6/8/99  - Official Release 0.2.0    | 
 |  *            Merged into the kernel code  | 
 |  *  8/18/99 - Updated driver for 2.3.13 kernel to use new pci | 
 |  *	      resource. Driver also reports the card name returned by | 
 |  *            the pci resource. | 
 |  *  1/11/00 - Added spinlocks for smp | 
 |  *  2/23/00 - Updated to dev_kfree_irq  | 
 |  *  3/10/00 - Fixed FDX enable which triggered other bugs also  | 
 |  *            squashed. | 
 |  *  5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes. | 
 |  *            The odd thing about the changes is that the fix for | 
 |  *            endian issues with the big-endian data in the arb, asb... | 
 |  *            was to always swab() the bytes, no matter what CPU. | 
 |  *            That's because the read[wl]() functions always swap the | 
 |  *            bytes on the way in on PPC. | 
 |  *            Fixing the hardware descriptors was another matter, | 
 |  *            because they weren't going through read[wl](), there all | 
 |  *            the results had to be in memory in le32 values. kdaaker | 
 |  * | 
 |  * 12/23/00 - Added minimal Cardbus support (Thanks Donald). | 
 |  * | 
 |  * 03/09/01 - Add new pci api, dev_base_lock, general clean up.  | 
 |  * | 
 |  * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev | 
 |  *	      Change proc_fs behaviour, now one entry per adapter. | 
 |  * | 
 |  * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the | 
 |  *	      adapter when live does not take the system down with it. | 
 |  *  | 
 |  * 06/02/01 - Clean up, copy skb for small packets | 
 |  *  | 
 |  * 06/22/01 - Add EISR error handling routines  | 
 |  * | 
 |  * 07/19/01 - Improve bad LAA reporting, strip out freemem | 
 |  *	      into a separate function, its called from 3  | 
 |  *	      different places now.  | 
 |  * 02/09/02 - Replaced sleep_on.  | 
 |  * 03/01/02 - Replace access to several registers from 32 bit to  | 
 |  * 	      16 bit. Fixes alignment errors on PPC 64 bit machines. | 
 |  * 	      Thanks to Al Trautman for this one. | 
 |  * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was | 
 |  * 	      silently ignored until the error checking code  | 
 |  * 	      went into version 1.0.0  | 
 |  * 06/04/02 - Add correct start up sequence for the cardbus adapters. | 
 |  * 	      Required for strict compliance with pci power mgmt specs. | 
 |  *  To Do: | 
 |  * | 
 |  *	     Wake on lan	 | 
 |  *  | 
 |  *  If Problems do Occur | 
 |  *  Most problems can be rectified by either closing and opening the interface | 
 |  *  (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult | 
 |  *  if compiled into the kernel). | 
 |  */ | 
 |  | 
 | /* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */ | 
 |  | 
 | #define OLYMPIC_DEBUG 0 | 
 |  | 
 |  | 
 | #include <linux/config.h> | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/in.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/string.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/trdevice.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/init.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/jiffies.h> | 
 |  | 
 | #include <net/checksum.h> | 
 |  | 
 | #include <asm/io.h> | 
 | #include <asm/system.h> | 
 |  | 
 | #include "olympic.h" | 
 |  | 
 | /* I've got to put some intelligence into the version number so that Peter and I know | 
 |  * which version of the code somebody has got.  | 
 |  * Version Number = a.b.c.d  where a.b.c is the level of code and d is the latest author. | 
 |  * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike | 
 |  *  | 
 |  * Official releases will only have an a.b.c version number format.  | 
 |  */ | 
 |  | 
 | static char version[] __devinitdata =  | 
 | "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ;  | 
 |  | 
 | static char *open_maj_error[]  = {"No error", "Lobe Media Test", "Physical Insertion", | 
 | 				   "Address Verification", "Neighbor Notification (Ring Poll)", | 
 | 				   "Request Parameters","FDX Registration Request", | 
 | 				   "FDX Duplicate Address Check", "Station registration Query Wait", | 
 | 				   "Unknown stage"}; | 
 |  | 
 | static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault", | 
 | 				   "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing", | 
 | 				   "Duplicate Node Address","Request Parameters","Remove Received", | 
 | 				   "Reserved", "Reserved", "No Monitor Detected for RPL",  | 
 | 				   "Monitor Contention failer for RPL", "FDX Protocol Error"}; | 
 |  | 
 | /* Module paramters */ | 
 |  | 
 | MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;  | 
 | MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;  | 
 |  | 
 | /* Ring Speed 0,4,16,100  | 
 |  * 0 = Autosense          | 
 |  * 4,16 = Selected speed only, no autosense | 
 |  * This allows the card to be the first on the ring | 
 |  * and become the active monitor. | 
 |  * 100 = Nothing at present, 100mbps is autodetected | 
 |  * if FDX is turned on. May be implemented in the future to  | 
 |  * fail if 100mpbs is not detected. | 
 |  * | 
 |  * WARNING: Some hubs will allow you to insert | 
 |  * at the wrong speed | 
 |  */ | 
 |  | 
 | static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ; | 
 | module_param_array(ringspeed, int, NULL, 0); | 
 |  | 
 | /* Packet buffer size */ | 
 |  | 
 | static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ; | 
 | module_param_array(pkt_buf_sz, int, NULL, 0) ; | 
 |  | 
 | /* Message Level */ | 
 |  | 
 | static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ;  | 
 | module_param_array(message_level, int, NULL, 0) ; | 
 |  | 
 | /* Change network_monitor to receive mac frames through the arb channel. | 
 |  * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr | 
 |  * device, i.e. tr0, tr1 etc.  | 
 |  * Intended to be used to create a ring-error reporting network module  | 
 |  * i.e. it will give you the source address of beaconers on the ring  | 
 |  */ | 
 | static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,}; | 
 | module_param_array(network_monitor, int, NULL, 0); | 
 |  | 
 | static struct pci_device_id olympic_pci_tbl[] = { | 
 | 	{PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,}, | 
 | 	{ } 	/* Terminating Entry */ | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ;  | 
 |  | 
 |  | 
 | static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);  | 
 | static int olympic_init(struct net_device *dev); | 
 | static int olympic_open(struct net_device *dev); | 
 | static int olympic_xmit(struct sk_buff *skb, struct net_device *dev); | 
 | static int olympic_close(struct net_device *dev); | 
 | static void olympic_set_rx_mode(struct net_device *dev); | 
 | static void olympic_freemem(struct net_device *dev) ;   | 
 | static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs); | 
 | static struct net_device_stats * olympic_get_stats(struct net_device *dev); | 
 | static int olympic_set_mac_address(struct net_device *dev, void *addr) ;  | 
 | static void olympic_arb_cmd(struct net_device *dev); | 
 | static int olympic_change_mtu(struct net_device *dev, int mtu); | 
 | static void olympic_srb_bh(struct net_device *dev) ;  | 
 | static void olympic_asb_bh(struct net_device *dev) ;  | 
 | static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ;  | 
 |  | 
 | static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | 
 | { | 
 | 	struct net_device *dev ;  | 
 | 	struct olympic_private *olympic_priv; | 
 | 	static int card_no = -1 ; | 
 | 	int i ;  | 
 |  | 
 | 	card_no++ ;  | 
 |  | 
 | 	if ((i = pci_enable_device(pdev))) { | 
 | 		return i ;  | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	if ((i = pci_request_regions(pdev,"olympic"))) {  | 
 | 		goto op_disable_dev; | 
 | 	} | 
 |   | 
 | 	dev = alloc_trdev(sizeof(struct olympic_private)) ;  | 
 | 	if (!dev) { | 
 | 		i = -ENOMEM;  | 
 | 		goto op_free_dev; | 
 | 	} | 
 |  | 
 | 	olympic_priv = dev->priv ; | 
 | 	 | 
 | 	spin_lock_init(&olympic_priv->olympic_lock) ;  | 
 |  | 
 | 	init_waitqueue_head(&olympic_priv->srb_wait); | 
 | 	init_waitqueue_head(&olympic_priv->trb_wait); | 
 | #if OLYMPIC_DEBUG   | 
 | 	printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, dev->priv); | 
 | #endif | 
 | 	dev->irq=pdev->irq; | 
 | 	dev->base_addr=pci_resource_start(pdev, 0); | 
 | 	olympic_priv->olympic_card_name = pci_name(pdev); | 
 | 	olympic_priv->pdev = pdev;  | 
 | 	olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256); | 
 | 	olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048); | 
 | 	if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) { | 
 | 		goto op_free_iomap; | 
 | 	} | 
 | 				 | 
 | 	if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) | 
 | 		olympic_priv->pkt_buf_sz = PKT_BUF_SZ ;  | 
 | 	else | 
 | 		olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;  | 
 |  | 
 | 	dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ;  | 
 | 	olympic_priv->olympic_ring_speed = ringspeed[card_no] ;  | 
 | 	olympic_priv->olympic_message_level = message_level[card_no] ;  | 
 | 	olympic_priv->olympic_network_monitor = network_monitor[card_no]; | 
 | 	 | 
 | 	if ((i = olympic_init(dev))) { | 
 | 		goto op_free_iomap; | 
 | 	}				 | 
 |  | 
 | 	dev->open=&olympic_open; | 
 | 	dev->hard_start_xmit=&olympic_xmit; | 
 | 	dev->change_mtu=&olympic_change_mtu; | 
 | 	dev->stop=&olympic_close; | 
 | 	dev->do_ioctl=NULL; | 
 | 	dev->set_multicast_list=&olympic_set_rx_mode; | 
 | 	dev->get_stats=&olympic_get_stats ; | 
 | 	dev->set_mac_address=&olympic_set_mac_address ;   | 
 | 	SET_MODULE_OWNER(dev) ;  | 
 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 |  | 
 | 	pci_set_drvdata(pdev,dev) ;  | 
 | 	register_netdev(dev) ;  | 
 | 	printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name); | 
 | 	if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */  | 
 | 		char proc_name[20] ;  | 
 | 		strcpy(proc_name,"net/olympic_") ;  | 
 | 		strcat(proc_name,dev->name) ;  | 
 | 		create_proc_read_entry(proc_name,0,NULL,olympic_proc_info,(void *)dev) ;  | 
 | 		printk("Olympic: Network Monitor information: /proc/%s\n",proc_name);  | 
 | 	} | 
 | 	return  0 ; | 
 |  | 
 | op_free_iomap: | 
 | 	if (olympic_priv->olympic_mmio) | 
 | 		iounmap(olympic_priv->olympic_mmio);  | 
 | 	if (olympic_priv->olympic_lap) | 
 | 		iounmap(olympic_priv->olympic_lap); | 
 |  | 
 | op_free_dev: | 
 | 	free_netdev(dev); | 
 | 	pci_release_regions(pdev);  | 
 |  | 
 | op_disable_dev: | 
 | 	pci_disable_device(pdev); | 
 | 	return i; | 
 | } | 
 |  | 
 | static int __devinit olympic_init(struct net_device *dev) | 
 | { | 
 |     	struct olympic_private *olympic_priv; | 
 | 	u8 __iomem *olympic_mmio, *init_srb,*adapter_addr; | 
 | 	unsigned long t;  | 
 | 	unsigned int uaa_addr; | 
 |  | 
 |     	olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	olympic_mmio=olympic_priv->olympic_mmio; | 
 |  | 
 | 	printk("%s \n", version); | 
 | 	printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq); | 
 |  | 
 | 	writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL); | 
 | 	t=jiffies; | 
 | 	while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) { | 
 | 		schedule();		 | 
 | 		if(time_after(jiffies, t + 40*HZ)) { | 
 | 			printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 	} | 
 |  | 
 |  | 
 | 	/* Needed for cardbus */ | 
 | 	if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { | 
 | 		writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK); | 
 | 	} | 
 | 	 | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("BCTL: %x\n",readl(olympic_mmio+BCTL)); | 
 | 	printk("GPR: %x\n",readw(olympic_mmio+GPR)); | 
 | 	printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK)); | 
 | #endif | 
 | 	/* Aaaahhh, You have got to be real careful setting GPR, the card | 
 | 	   holds the previous values from flash memory, including autosense  | 
 |            and ring speed */ | 
 |  | 
 | 	writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL); | 
 | 	 | 
 | 	if (olympic_priv->olympic_ring_speed  == 0) { /* Autosense */ | 
 | 		writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR); | 
 | 		if (olympic_priv->olympic_message_level)  | 
 | 			printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name); | 
 | 	} else if (olympic_priv->olympic_ring_speed == 16) { | 
 | 		if (olympic_priv->olympic_message_level)  | 
 | 			printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name); | 
 | 		writew(GPR_16MBPS, olympic_mmio+GPR); | 
 | 	} else if (olympic_priv->olympic_ring_speed == 4) { | 
 | 		if (olympic_priv->olympic_message_level)  | 
 | 			printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ;  | 
 | 		writew(0, olympic_mmio+GPR); | 
 | 	}  | 
 | 	 | 
 | 	writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR); | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ;  | 
 | #endif | 
 | 	/* Solo has been paused to meet the Cardbus power | 
 | 	 * specs if the adapter is cardbus. Check to  | 
 | 	 * see its been paused and then restart solo. The | 
 | 	 * adapter should set the pause bit within 1 second. | 
 | 	 */ | 
 |  | 
 | 	if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) {  | 
 | 		t=jiffies; | 
 | 		while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) {  | 
 | 			schedule() ;  | 
 | 			if(time_after(jiffies, t + 2*HZ)) { | 
 | 				printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ;  | 
 | 				return -ENODEV; | 
 | 			} | 
 | 		} | 
 | 		writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ;  | 
 | 	} | 
 | 	 | 
 | 	/* start solo init */ | 
 | 	writel((1<<15),olympic_mmio+SISR_MASK_SUM); | 
 |  | 
 | 	t=jiffies; | 
 | 	while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) { | 
 | 		schedule();		 | 
 | 		if(time_after(jiffies, t + 15*HZ)) { | 
 | 			printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 	} | 
 | 	 | 
 | 	writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); | 
 | #endif | 
 |  | 
 | 	init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); | 
 |  | 
 | #if OLYMPIC_DEBUG		 | 
 | { | 
 | 	int i; | 
 | 	printk("init_srb(%p): ",init_srb); | 
 | 	for(i=0;i<20;i++) | 
 | 		printk("%x ",readb(init_srb+i)); | 
 | 	printk("\n"); | 
 | } | 
 | #endif	 | 
 | 	if(readw(init_srb+6)) { | 
 | 		printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6)); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (olympic_priv->olympic_message_level) { | 
 | 		if ( readb(init_srb +2) & 0x40) {  | 
 | 			printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ; | 
 | 		} else {  | 
 | 			printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n"); | 
 | 		} | 
 | 	} | 
 |    | 
 | 	uaa_addr=swab16(readw(init_srb+8)); | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("UAA resides at %x\n",uaa_addr); | 
 | #endif | 
 |  | 
 | 	writel(uaa_addr,olympic_mmio+LAPA); | 
 | 	adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800)); | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n", | 
 | 			readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2), | 
 | 			readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5)); | 
 | #endif | 
 |  | 
 | 	memcpy_fromio(&dev->dev_addr[0], adapter_addr,6); | 
 |  | 
 | 	olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12));  | 
 | 	olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14));  | 
 |  | 
 | 	return 0; | 
 |  | 
 | } | 
 |  | 
 | static int olympic_open(struct net_device *dev)  | 
 | { | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb; | 
 | 	unsigned long flags, t; | 
 | 	int i, open_finished = 1 ; | 
 | 	u8 resp, err; | 
 |  | 
 | 	DECLARE_WAITQUEUE(wait,current) ;  | 
 |  | 
 | 	olympic_init(dev); | 
 |  | 
 | 	if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) { | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); | 
 | 	printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR)); | 
 | #endif | 
 |  | 
 | 	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); | 
 |  | 
 | 	writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ | 
 |  | 
 | 	writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */ | 
 |  | 
 | 	/* adapter is closed, so SRB is pointed to by LAPWWO */ | 
 |  | 
 | 	writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); | 
 | 	init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); | 
 | 	 | 
 | #if OLYMPIC_DEBUG | 
 | 	printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); | 
 | 	printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK)); | 
 | 	printk("Before the open command \n"); | 
 | #endif	 | 
 | 	do { | 
 | 		memset_io(init_srb,0,SRB_COMMAND_SIZE); | 
 |  | 
 | 		writeb(SRB_OPEN_ADAPTER,init_srb) ; 	/* open */ | 
 | 		writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2); | 
 |  | 
 | 		/* If Network Monitor, instruct card to copy MAC frames through the ARB */ | 
 | 		if (olympic_priv->olympic_network_monitor)  | 
 | 			writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8); | 
 | 		else | 
 | 			writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8); | 
 | 	 | 
 | 		/* Test OR of first 3 bytes as its totally possible for  | 
 | 		 * someone to set the first 2 bytes to be zero, although this  | 
 | 		 * is an error, the first byte must have bit 6 set to 1  */ | 
 |  | 
 | 		if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) { | 
 | 			writeb(olympic_priv->olympic_laa[0],init_srb+12); | 
 | 			writeb(olympic_priv->olympic_laa[1],init_srb+13); | 
 | 			writeb(olympic_priv->olympic_laa[2],init_srb+14); | 
 | 			writeb(olympic_priv->olympic_laa[3],init_srb+15); | 
 | 			writeb(olympic_priv->olympic_laa[4],init_srb+16); | 
 | 			writeb(olympic_priv->olympic_laa[5],init_srb+17); | 
 | 			memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ;   | 
 | 		} 	 | 
 | 		writeb(1,init_srb+30); | 
 |  | 
 | 		spin_lock_irqsave(&olympic_priv->olympic_lock,flags);	 | 
 | 		olympic_priv->srb_queued=1; | 
 |  | 
 | 		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 | 		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | 
 |  | 
 | 		t = jiffies ;  | 
 | 	 | 
 | 		add_wait_queue(&olympic_priv->srb_wait,&wait) ; | 
 | 		set_current_state(TASK_INTERRUPTIBLE) ;  | 
 |   | 
 |  		while(olympic_priv->srb_queued) {         | 
 | 			schedule() ;  | 
 |         		if(signal_pending(current))	{             | 
 | 				printk(KERN_WARNING "%s: Signal received in open.\n", | 
 |                 			dev->name); | 
 |             			printk(KERN_WARNING "SISR=%x LISR=%x\n", | 
 |                 			readl(olympic_mmio+SISR), | 
 |                 			readl(olympic_mmio+LISR)); | 
 |             			olympic_priv->srb_queued=0; | 
 |             			break; | 
 |         		} | 
 | 			if (time_after(jiffies, t + 10*HZ)) { | 
 | 				printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ;  | 
 | 				olympic_priv->srb_queued=0; | 
 | 				break ;  | 
 | 			}  | 
 | 			set_current_state(TASK_INTERRUPTIBLE) ;  | 
 |     		} | 
 | 		remove_wait_queue(&olympic_priv->srb_wait,&wait) ;  | 
 | 		set_current_state(TASK_RUNNING) ;  | 
 | 		olympic_priv->srb_queued = 0 ;  | 
 | #if OLYMPIC_DEBUG | 
 | 		printk("init_srb(%p): ",init_srb); | 
 | 		for(i=0;i<20;i++) | 
 | 			printk("%02x ",readb(init_srb+i)); | 
 | 		printk("\n"); | 
 | #endif | 
 | 		 | 
 | 		/* If we get the same return response as we set, the interrupt wasn't raised and the open | 
 |                  * timed out. | 
 | 		 */ | 
 |  | 
 | 		switch (resp = readb(init_srb+2)) { | 
 | 		case OLYMPIC_CLEAR_RET_CODE: | 
 | 			printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ;  | 
 | 			goto out; | 
 | 		case 0: | 
 | 			open_finished = 1; | 
 | 			break; | 
 | 		case 0x07: | 
 | 			if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */ | 
 | 				printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name);  | 
 | 				open_finished = 0 ;   | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			err = readb(init_srb+7); | 
 |  | 
 | 			if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) {  | 
 | 				printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name); | 
 | 				printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name); | 
 | 			} else { | 
 | 				printk(KERN_WARNING "%s: %s - %s\n", dev->name, | 
 | 					open_maj_error[(err & 0xf0) >> 4], | 
 | 					open_min_error[(err & 0x0f)]); | 
 | 			} | 
 | 			goto out; | 
 |  | 
 | 		case 0x32: | 
 | 			printk(KERN_WARNING "%s: Invalid LAA: %02x:%02x:%02x:%02x:%02x:%02x\n", | 
 | 				dev->name,  | 
 | 				olympic_priv->olympic_laa[0], | 
 | 				olympic_priv->olympic_laa[1], | 
 | 				olympic_priv->olympic_laa[2], | 
 | 				olympic_priv->olympic_laa[3], | 
 | 				olympic_priv->olympic_laa[4], | 
 | 				olympic_priv->olympic_laa[5]) ;  | 
 | 			goto out; | 
 |  | 
 | 		default: | 
 | 			printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp); | 
 | 			goto out; | 
 |  | 
 | 		} | 
 | 	} while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */	 | 
 |  | 
 | 	if (readb(init_srb+18) & (1<<3))  | 
 | 		if (olympic_priv->olympic_message_level)  | 
 | 			printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name); | 
 |  | 
 | 	if (readb(init_srb+18) & (1<<1)) | 
 | 		olympic_priv->olympic_ring_speed = 100 ;  | 
 | 	else if (readb(init_srb+18) & 1) | 
 | 		olympic_priv->olympic_ring_speed = 16 ;  | 
 | 	else | 
 | 		olympic_priv->olympic_ring_speed = 4 ;  | 
 |  | 
 | 	if (olympic_priv->olympic_message_level)  | 
 | 		printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed); | 
 |  | 
 | 	olympic_priv->asb = swab16(readw(init_srb+8)); | 
 | 	olympic_priv->srb = swab16(readw(init_srb+10)); | 
 | 	olympic_priv->arb = swab16(readw(init_srb+12)); | 
 | 	olympic_priv->trb = swab16(readw(init_srb+16)); | 
 |  | 
 | 	olympic_priv->olympic_receive_options = 0x01 ;  | 
 | 	olympic_priv->olympic_copy_all_options = 0 ;  | 
 | 	 | 
 | 	/* setup rx ring */ | 
 | 	 | 
 | 	writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */  | 
 |  | 
 | 	writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */ | 
 |  | 
 | 	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { | 
 |  | 
 | 		struct sk_buff *skb; | 
 | 		 | 
 | 		skb=dev_alloc_skb(olympic_priv->pkt_buf_sz); | 
 | 		if(skb == NULL) | 
 | 			break; | 
 |  | 
 | 		skb->dev = dev; | 
 |  | 
 | 		olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev,  | 
 | 							  skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ;  | 
 | 		olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz);  | 
 | 		olympic_priv->rx_ring_skb[i]=skb; | 
 | 	} | 
 |  | 
 | 	if (i==0) { | 
 | 		printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring,  | 
 | 					 sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); | 
 | 	writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ); | 
 | 	writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA); | 
 | 	writew(i, olympic_mmio+RXDESCQCNT); | 
 | 		 | 
 | 	olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring,  | 
 | 						sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); | 
 | 	writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ); | 
 | 	writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA); | 
 | 	 | 
 |  	olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1;	/* last processed rx status */ | 
 | 	olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1;   | 
 |  | 
 | 	writew(i, olympic_mmio+RXSTATQCNT); | 
 |  | 
 | #if OLYMPIC_DEBUG  | 
 | 	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); | 
 | 	printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); | 
 | 	printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) ); | 
 | 	printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) ); | 
 | 	printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7])  ); | 
 |  | 
 | 	printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); | 
 | 	printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n", | 
 | 		olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ;  | 
 | #endif | 
 |  | 
 | 	writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ); | 
 |  | 
 | #if OLYMPIC_DEBUG  | 
 | 	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); | 
 | 	printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); | 
 | 	printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); | 
 | #endif  | 
 |  | 
 | 	writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM); | 
 |  | 
 | 	/* setup tx ring */ | 
 |  | 
 | 	writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */ | 
 | 	for(i=0;i<OLYMPIC_TX_RING_SIZE;i++)  | 
 | 		olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef; | 
 |  | 
 | 	olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE; | 
 | 	olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring, | 
 | 					 sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ;  | 
 | 	writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1); | 
 | 	writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1); | 
 | 	writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1); | 
 | 	 | 
 | 	olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring, | 
 | 						sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); | 
 | 	writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1); | 
 | 	writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1); | 
 | 	writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1); | 
 | 		 | 
 | 	olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */ | 
 | 	olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */ | 
 |  | 
 | 	writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */ | 
 | 	writel(0,olympic_mmio+EISR) ;  | 
 | 	writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */ | 
 | 	writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM); | 
 |  | 
 | #if OLYMPIC_DEBUG  | 
 | 	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); | 
 | 	printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK)); | 
 | #endif | 
 |  | 
 | 	if (olympic_priv->olympic_network_monitor) {  | 
 | 		u8 __iomem *oat ;  | 
 | 		u8 __iomem *opt ;  | 
 | 		oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;  | 
 | 		opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;  | 
 |  | 
 | 		printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name,  | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)),  | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5)); | 
 | 		printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name,  | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),  | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), | 
 | 			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); | 
 | 		printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name,  | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), | 
 | 			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5)); | 
 | 	} | 
 | 	 | 
 | 	netif_start_queue(dev); | 
 | 	return 0; | 
 |  | 
 | out: | 
 | 	free_irq(dev->irq, dev); | 
 | 	return -EIO; | 
 | }	 | 
 |  | 
 | /* | 
 |  *	When we enter the rx routine we do not know how many frames have been  | 
 |  *	queued on the rx channel.  Therefore we start at the next rx status | 
 |  *	position and travel around the receive ring until we have completed | 
 |  *	all the frames. | 
 |  * | 
 |  *	This means that we may process the frame before we receive the end | 
 |  *	of frame interrupt. This is why we always test the status instead | 
 |  *	of blindly processing the next frame. | 
 |  * | 
 |  *	We also remove the last 4 bytes from the packet as well, these are | 
 |  *	just token ring trailer info and upset protocols that don't check  | 
 |  *	their own length, i.e. SNA.  | 
 |  *	 | 
 |  */ | 
 | static void olympic_rx(struct net_device *dev) | 
 | { | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | 
 | 	struct olympic_rx_status *rx_status; | 
 | 	struct olympic_rx_desc *rx_desc ;  | 
 | 	int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len; | 
 | 	struct sk_buff *skb, *skb2; | 
 | 	int i; | 
 |  | 
 | 	rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ;  | 
 |   | 
 | 	while (rx_status->status_buffercnt) {  | 
 |                 u32 l_status_buffercnt; | 
 |  | 
 | 		olympic_priv->rx_status_last_received++ ; | 
 | 		olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1); | 
 | #if OLYMPIC_DEBUG | 
 | 		printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen)); | 
 | #endif | 
 | 		length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff; | 
 | 		buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff;  | 
 | 		i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */  | 
 | 		frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16;  | 
 |  | 
 | #if OLYMPIC_DEBUG  | 
 | 		printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt); | 
 | #endif | 
 |                 l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt); | 
 | 		if(l_status_buffercnt & 0xC0000000) { | 
 | 			if (l_status_buffercnt & 0x3B000000) { | 
 | 				if (olympic_priv->olympic_message_level) { | 
 | 					if (l_status_buffercnt & (1<<29))  /* Rx Frame Truncated */ | 
 | 						printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name); | 
 | 					if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */ | 
 | 						printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name); | 
 | 					if (l_status_buffercnt & (1<<27)) /* No receive buffers */ | 
 | 						printk(KERN_WARNING "%s: No receive buffers \n",dev->name); | 
 | 					if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */ | 
 | 						printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name); | 
 | 					if (l_status_buffercnt & (1<<24)) /* Received Error Detect */ | 
 | 						printk(KERN_WARNING "%s: Received Error Detect \n",dev->name); | 
 | 				}  | 
 | 				olympic_priv->rx_ring_last_received += i ;  | 
 | 				olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;  | 
 | 				olympic_priv->olympic_stats.rx_errors++;	  | 
 | 			} else {	 | 
 | 			 | 
 | 				if (buffer_cnt == 1) { | 
 | 					skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ;  | 
 | 				} else { | 
 | 					skb = dev_alloc_skb(length) ;  | 
 | 				} | 
 |  | 
 | 				if (skb == NULL) { | 
 | 					printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ; | 
 | 					olympic_priv->olympic_stats.rx_dropped++ ;  | 
 | 					/* Update counters even though we don't transfer the frame */ | 
 | 					olympic_priv->rx_ring_last_received += i ;  | 
 | 					olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;   | 
 | 				} else  { | 
 | 					skb->dev = dev ;  | 
 |  | 
 | 					/* Optimise based upon number of buffers used.  | 
 | 			   	   	   If only one buffer is used we can simply swap the buffers around. | 
 | 			   	   	   If more than one then we must use the new buffer and copy the information | 
 | 			   	   	   first. Ideally all frames would be in a single buffer, this can be tuned by | 
 |                                	   	   altering the buffer size. If the length of the packet is less than | 
 | 					   1500 bytes we're going to copy it over anyway to stop packets getting | 
 | 					   dropped from sockets with buffers smaller than our pkt_buf_sz. */ | 
 | 				 | 
 |  					if (buffer_cnt==1) { | 
 | 						olympic_priv->rx_ring_last_received++ ;  | 
 | 						olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); | 
 | 						rx_ring_last_received = olympic_priv->rx_ring_last_received ; | 
 | 						if (length > 1500) {  | 
 | 							skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ;  | 
 | 							/* unmap buffer */ | 
 | 							pci_unmap_single(olympic_priv->pdev, | 
 | 								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),  | 
 | 								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;  | 
 | 							skb_put(skb2,length-4); | 
 | 							skb2->protocol = tr_type_trans(skb2,dev); | 
 | 							olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer =  | 
 | 								cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data,  | 
 | 								olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); | 
 | 							olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length =  | 
 | 								cpu_to_le32(olympic_priv->pkt_buf_sz);  | 
 | 							olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ;  | 
 | 							netif_rx(skb2) ;  | 
 | 						} else {  | 
 | 							pci_dma_sync_single_for_cpu(olympic_priv->pdev, | 
 | 								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | 
 | 								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;  | 
 | 							memcpy(skb_put(skb,length-4),olympic_priv->rx_ring_skb[rx_ring_last_received]->data,length-4) ;  | 
 | 							pci_dma_sync_single_for_device(olympic_priv->pdev, | 
 | 								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | 
 | 								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | 
 | 							skb->protocol = tr_type_trans(skb,dev) ;  | 
 | 							netif_rx(skb) ;  | 
 | 						}  | 
 | 					} else { | 
 | 						do { /* Walk the buffers */  | 
 | 							olympic_priv->rx_ring_last_received++ ;  | 
 | 							olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); | 
 | 							rx_ring_last_received = olympic_priv->rx_ring_last_received ;  | 
 | 							pci_dma_sync_single_for_cpu(olympic_priv->pdev, | 
 | 								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | 
 | 								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;  | 
 | 							rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]); | 
 | 							cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length));  | 
 | 							memcpy(skb_put(skb, cpy_length), olympic_priv->rx_ring_skb[rx_ring_last_received]->data, cpy_length) ; | 
 | 							pci_dma_sync_single_for_device(olympic_priv->pdev, | 
 | 								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | 
 | 								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | 
 | 						} while (--i) ;  | 
 | 						skb_trim(skb,skb->len-4) ;  | 
 | 						skb->protocol = tr_type_trans(skb,dev); | 
 | 						netif_rx(skb) ;  | 
 | 					}  | 
 | 					dev->last_rx = jiffies ;  | 
 | 					olympic_priv->olympic_stats.rx_packets++ ;  | 
 | 					olympic_priv->olympic_stats.rx_bytes += length ;  | 
 | 				} /* if skb == null */ | 
 | 			} /* If status & 0x3b */ | 
 |  | 
 | 		} else { /*if buffercnt & 0xC */ | 
 | 			olympic_priv->rx_ring_last_received += i ;  | 
 | 			olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ;  | 
 | 		}  | 
 |  | 
 | 		rx_status->fragmentcnt_framelen = 0 ;  | 
 | 		rx_status->status_buffercnt = 0 ;  | 
 | 		rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]); | 
 |  | 
 | 		writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) |  buffer_cnt , olympic_mmio+RXENQ);  | 
 | 	} /* while */ | 
 |  | 
 | } | 
 |  | 
 | static void olympic_freemem(struct net_device *dev)  | 
 | {  | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	int i; | 
 | 			 | 
 | 	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { | 
 | 		if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) { | 
 | 			dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]); | 
 | 			olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL; | 
 | 		} | 
 | 		if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != 0xdeadbeef) { | 
 | 			pci_unmap_single(olympic_priv->pdev,  | 
 | 			le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer), | 
 | 			olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); | 
 | 		} | 
 | 		olympic_priv->rx_status_last_received++; | 
 | 		olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; | 
 | 	} | 
 | 	/* unmap rings */ | 
 | 	pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr,  | 
 | 		sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); | 
 | 	pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr, | 
 | 		sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); | 
 |  | 
 | 	pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr,  | 
 | 		sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); | 
 | 	pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr,  | 
 | 		sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE); | 
 |  | 
 | 	return ;  | 
 | } | 
 |   | 
 | static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs)  | 
 | { | 
 | 	struct net_device *dev= (struct net_device *)dev_id; | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | 
 | 	u32 sisr; | 
 | 	u8 __iomem *adapter_check_area ;  | 
 | 	 | 
 | 	/*  | 
 | 	 *  Read sisr but don't reset it yet.  | 
 | 	 *  The indication bit may have been set but the interrupt latch | 
 | 	 *  bit may not be set, so we'd lose the interrupt later.  | 
 | 	 */  | 
 | 	sisr=readl(olympic_mmio+SISR) ;  | 
 | 	if (!(sisr & SISR_MI)) /* Interrupt isn't for us */  | 
 | 		return IRQ_NONE; | 
 | 	sisr=readl(olympic_mmio+SISR_RR) ;  /* Read & Reset sisr */  | 
 |  | 
 | 	spin_lock(&olympic_priv->olympic_lock); | 
 |  | 
 | 	/* Hotswap gives us this on removal */ | 
 | 	if (sisr == 0xffffffff) {  | 
 | 		printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ;  | 
 | 		spin_unlock(&olympic_priv->olympic_lock) ;  | 
 | 		return IRQ_NONE; | 
 | 	}  | 
 | 		 | 
 | 	if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK |   | 
 | 			SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) {   | 
 | 	 | 
 | 		/* If we ever get this the adapter is seriously dead. Only a reset is going to  | 
 | 		 * bring it back to life. We're talking pci bus errors and such like :( */  | 
 | 		if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) { | 
 | 			printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ;  | 
 | 			printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ;  | 
 | 			printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ;  | 
 | 			printk(KERN_ERR "or the linux-tr mailing list.\n") ;  | 
 | 			wake_up_interruptible(&olympic_priv->srb_wait); | 
 | 			spin_unlock(&olympic_priv->olympic_lock) ;  | 
 | 			return IRQ_HANDLED; | 
 | 		} /* SISR_ERR */ | 
 |  | 
 | 		if(sisr & SISR_SRB_REPLY) { | 
 | 			if(olympic_priv->srb_queued==1) { | 
 | 				wake_up_interruptible(&olympic_priv->srb_wait); | 
 | 			} else if (olympic_priv->srb_queued==2) {  | 
 | 				olympic_srb_bh(dev) ;  | 
 | 			} | 
 | 			olympic_priv->srb_queued=0; | 
 | 		} /* SISR_SRB_REPLY */ | 
 |  | 
 | 		/* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure | 
 | 		   we get all tx completions. */ | 
 | 		if (sisr & SISR_TX1_EOF) { | 
 | 			while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) {  | 
 | 				olympic_priv->tx_ring_last_status++; | 
 | 				olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1); | 
 | 				olympic_priv->free_tx_ring_entries++; | 
 | 				olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len; | 
 | 				olympic_priv->olympic_stats.tx_packets++ ;  | 
 | 				pci_unmap_single(olympic_priv->pdev,  | 
 | 					le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer),  | 
 | 					olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE); | 
 | 				dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]); | 
 | 				olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef; | 
 | 				olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0; | 
 | 			} | 
 | 			netif_wake_queue(dev); | 
 | 		} /* SISR_TX1_EOF */ | 
 | 	 | 
 | 		if (sisr & SISR_RX_STATUS) { | 
 | 			olympic_rx(dev); | 
 | 		} /* SISR_RX_STATUS */ | 
 | 	 | 
 | 		if (sisr & SISR_ADAPTER_CHECK) { | 
 | 			netif_stop_queue(dev); | 
 | 			printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); | 
 | 			writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA); | 
 | 			adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ; | 
 | 			printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ;  | 
 | 			spin_unlock(&olympic_priv->olympic_lock) ;  | 
 | 			return IRQ_HANDLED;  | 
 | 		} /* SISR_ADAPTER_CHECK */ | 
 | 	 | 
 | 		if (sisr & SISR_ASB_FREE) { | 
 | 			/* Wake up anything that is waiting for the asb response */   | 
 | 			if (olympic_priv->asb_queued) { | 
 | 				olympic_asb_bh(dev) ;  | 
 | 			} | 
 | 		} /* SISR_ASB_FREE */ | 
 | 	 | 
 | 		if (sisr & SISR_ARB_CMD) { | 
 | 			olympic_arb_cmd(dev) ;  | 
 | 		} /* SISR_ARB_CMD */ | 
 | 	 | 
 | 		if (sisr & SISR_TRB_REPLY) { | 
 | 			/* Wake up anything that is waiting for the trb response */ | 
 | 			if (olympic_priv->trb_queued) { | 
 | 				wake_up_interruptible(&olympic_priv->trb_wait); | 
 | 			} | 
 | 			olympic_priv->trb_queued = 0 ;  | 
 | 		} /* SISR_TRB_REPLY */	 | 
 | 	 | 
 | 		if (sisr & SISR_RX_NOBUF) { | 
 | 			/* According to the documentation, we don't have to do anything, but trapping it keeps it out of | 
 |                   	   	   /var/log/messages.  */ | 
 | 		} /* SISR_RX_NOBUF */ | 
 | 	} else {  | 
 | 		printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr); | 
 | 		printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ; | 
 | 	} /* One if the interrupts we want */ | 
 | 	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); | 
 | 	 | 
 | 	spin_unlock(&olympic_priv->olympic_lock) ;  | 
 | 	return IRQ_HANDLED; | 
 | }	 | 
 |  | 
 | static int olympic_xmit(struct sk_buff *skb, struct net_device *dev)  | 
 | { | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | 
 | 	unsigned long flags ;  | 
 |  | 
 | 	spin_lock_irqsave(&olympic_priv->olympic_lock, flags); | 
 |  | 
 | 	netif_stop_queue(dev); | 
 | 	 | 
 | 	if(olympic_priv->free_tx_ring_entries) { | 
 | 		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer =  | 
 | 			cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE)); | 
 | 		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000)); | 
 | 		olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb; | 
 | 		olympic_priv->free_tx_ring_entries--; | 
 |  | 
 |         	olympic_priv->tx_ring_free++; | 
 |         	olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1); | 
 | 		writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1); | 
 | 		netif_wake_queue(dev); | 
 | 		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | 
 | 		return 0; | 
 | 	} else { | 
 | 		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | 
 | 		return 1; | 
 | 	}  | 
 |  | 
 | } | 
 | 	 | 
 |  | 
 | static int olympic_close(struct net_device *dev)  | 
 | { | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb; | 
 | 	unsigned long t,flags; | 
 |  | 
 | 	DECLARE_WAITQUEUE(wait,current) ;  | 
 |  | 
 | 	netif_stop_queue(dev); | 
 | 	 | 
 | 	writel(olympic_priv->srb,olympic_mmio+LAPA); | 
 | 	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | 
 | 	 | 
 |     	writeb(SRB_CLOSE_ADAPTER,srb+0); | 
 | 	writeb(0,srb+1); | 
 | 	writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | 
 |  | 
 | 	add_wait_queue(&olympic_priv->srb_wait,&wait) ; | 
 | 	set_current_state(TASK_INTERRUPTIBLE) ;  | 
 |  | 
 | 	spin_lock_irqsave(&olympic_priv->olympic_lock,flags); | 
 | 	olympic_priv->srb_queued=1; | 
 |  | 
 | 	writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 | 	spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | 
 |  | 
 | 	while(olympic_priv->srb_queued) { | 
 |  | 
 | 		t = schedule_timeout_interruptible(60*HZ); | 
 |  | 
 |         	if(signal_pending(current))	{             | 
 | 			printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); | 
 |             		printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR)); | 
 |             		olympic_priv->srb_queued=0; | 
 |             		break; | 
 |         	} | 
 |  | 
 | 		if (t == 0) {  | 
 | 			printk(KERN_WARNING "%s: SRB timed out. May not be fatal. \n",dev->name) ;  | 
 | 		}  | 
 | 		olympic_priv->srb_queued=0; | 
 |     	} | 
 | 	remove_wait_queue(&olympic_priv->srb_wait,&wait) ;  | 
 |  | 
 | 	olympic_priv->rx_status_last_received++; | 
 | 	olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; | 
 |  | 
 | 	olympic_freemem(dev) ; 	 | 
 |  | 
 | 	/* reset tx/rx fifo's and busmaster logic */ | 
 |  | 
 | 	writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); | 
 | 	udelay(1); | 
 | 	writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | 	{ | 
 | 	int i ;  | 
 | 	printk("srb(%p): ",srb); | 
 | 	for(i=0;i<4;i++) | 
 | 		printk("%x ",readb(srb+i)); | 
 | 	printk("\n"); | 
 | 	} | 
 | #endif | 
 | 	free_irq(dev->irq,dev); | 
 |  | 
 | 	return 0; | 
 | 	 | 
 | } | 
 |  | 
 | static void olympic_set_rx_mode(struct net_device *dev)  | 
 | { | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;  | 
 |    	u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ;  | 
 | 	u8 options = 0;  | 
 | 	u8 __iomem *srb; | 
 | 	struct dev_mc_list *dmi ;  | 
 | 	unsigned char dev_mc_address[4] ;  | 
 | 	int i ;  | 
 |  | 
 | 	writel(olympic_priv->srb,olympic_mmio+LAPA); | 
 | 	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | 
 | 	options = olympic_priv->olympic_copy_all_options;  | 
 |  | 
 | 	if (dev->flags&IFF_PROMISC)   | 
 | 		options |= 0x61 ; | 
 | 	else | 
 | 		options &= ~0x61 ;  | 
 |  | 
 | 	/* Only issue the srb if there is a change in options */ | 
 |  | 
 | 	if ((options ^ olympic_priv->olympic_copy_all_options)) {  | 
 | 	 | 
 | 		/* Now to issue the srb command to alter the copy.all.options */ | 
 | 	 | 
 | 		writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb); | 
 | 		writeb(0,srb+1); | 
 | 		writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | 
 | 		writeb(0,srb+3); | 
 | 		writeb(olympic_priv->olympic_receive_options,srb+4); | 
 | 		writeb(options,srb+5); | 
 |  | 
 | 		olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | 
 |  | 
 | 		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 |  | 
 | 		olympic_priv->olympic_copy_all_options = options ; | 
 | 		 | 
 | 		return ;   | 
 | 	}  | 
 |  | 
 | 	/* Set the functional addresses we need for multicast */ | 
 |  | 
 | 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;  | 
 |  | 
 | 	for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) {  | 
 | 		dev_mc_address[0] |= dmi->dmi_addr[2] ;  | 
 | 		dev_mc_address[1] |= dmi->dmi_addr[3] ;  | 
 | 		dev_mc_address[2] |= dmi->dmi_addr[4] ;  | 
 | 		dev_mc_address[3] |= dmi->dmi_addr[5] ;  | 
 | 	} | 
 |  | 
 | 	writeb(SRB_SET_FUNC_ADDRESS,srb+0); | 
 | 	writeb(0,srb+1); | 
 | 	writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | 
 | 	writeb(0,srb+3); | 
 | 	writeb(0,srb+4); | 
 | 	writeb(0,srb+5); | 
 | 	writeb(dev_mc_address[0],srb+6); | 
 | 	writeb(dev_mc_address[1],srb+7); | 
 | 	writeb(dev_mc_address[2],srb+8); | 
 | 	writeb(dev_mc_address[3],srb+9); | 
 |  | 
 | 	olympic_priv->srb_queued = 2 ; | 
 | 	writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 |  | 
 | } | 
 |  | 
 | static void olympic_srb_bh(struct net_device *dev)  | 
 | {  | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;  | 
 |    	u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ;  | 
 | 	u8 __iomem *srb; | 
 |  | 
 | 	writel(olympic_priv->srb,olympic_mmio+LAPA); | 
 | 	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | 
 |  | 
 | 	switch (readb(srb)) {  | 
 |  | 
 | 		/* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous)  | 
 |                  * At some point we should do something if we get an error, such as | 
 |                  * resetting the IFF_PROMISC flag in dev | 
 | 		 */ | 
 |  | 
 | 		case SRB_MODIFY_RECEIVE_OPTIONS: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); | 
 | 					break ;  | 
 | 				default: | 
 | 					if (olympic_priv->olympic_message_level)  | 
 | 						printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ;  | 
 | 					break ; 	 | 
 | 			} /* switch srb[2] */  | 
 | 			break ; | 
 | 		 | 
 | 		/* SRB_SET_GROUP_ADDRESS - Multicast group setting  | 
 |                  */ | 
 |  | 
 | 		case SRB_SET_GROUP_ADDRESS: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x00: | 
 | 					break ;  | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;  | 
 | 					break ; | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);  | 
 | 					break ; | 
 | 				case 0x3c: | 
 | 					printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ;  | 
 | 					break ; | 
 | 				case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ | 
 | 					printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ;  | 
 | 					break ;   | 
 | 				case 0x55: | 
 | 					printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ;  | 
 | 					break ; | 
 | 				default: | 
 | 					break ;  | 
 | 			} /* switch srb[2] */  | 
 | 			break ;  | 
 |  | 
 | 		/* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list | 
 |  		 */ | 
 |  | 
 | 		case SRB_RESET_GROUP_ADDRESS: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x00: | 
 | 					break ;  | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x39: /* Must deal with this if individual multicast addresses used */ | 
 | 					printk(KERN_INFO "%s: Group address not found \n",dev->name);  | 
 | 					break ; | 
 | 				default: | 
 | 					break ;  | 
 | 			} /* switch srb[2] */ | 
 | 			break ;  | 
 |  | 
 | 		 | 
 | 		/* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode  | 
 | 		 */ | 
 |  | 
 | 		case SRB_SET_FUNC_ADDRESS: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x00: | 
 | 					if (olympic_priv->olympic_message_level) | 
 | 						printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ;  | 
 | 					break ; | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;  | 
 | 					break ;  | 
 | 				default: | 
 | 					break ;  | 
 | 			} /* switch srb[2] */ | 
 | 			break ;  | 
 | 	 | 
 | 		/* SRB_READ_LOG - Read and reset the adapter error counters | 
 |  		 */ | 
 |  | 
 | 		case SRB_READ_LOG: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x00:  | 
 | 					if (olympic_priv->olympic_message_level)  | 
 | 						printk(KERN_INFO "%s: Read Log issued\n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;  | 
 | 					break ;  | 
 | 			 | 
 | 			} /* switch srb[2] */ | 
 | 			break ;  | 
 | 		 | 
 | 		/* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ | 
 |  | 
 | 		case SRB_READ_SR_COUNTERS: | 
 | 			switch (readb(srb+2)) {  | 
 | 				case 0x00:  | 
 | 					if (olympic_priv->olympic_message_level)  | 
 | 						printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x01: | 
 | 					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;  | 
 | 					break ;  | 
 | 				case 0x04: | 
 | 					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;  | 
 | 					break ;  | 
 | 				default: | 
 | 					break ;  | 
 | 			} /* switch srb[2] */ | 
 | 			break ; | 
 |   | 
 | 		default: | 
 | 			printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name); | 
 | 			break ;  | 
 | 	} /* switch srb[0] */ | 
 |  | 
 | }  | 
 |  | 
 | static struct net_device_stats * olympic_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct olympic_private *olympic_priv ; | 
 | 	olympic_priv=(struct olympic_private *) dev->priv; | 
 | 	return (struct net_device_stats *) &olympic_priv->olympic_stats;  | 
 | } | 
 |  | 
 | static int olympic_set_mac_address (struct net_device *dev, void *addr)  | 
 | { | 
 | 	struct sockaddr *saddr = addr ;  | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ;  | 
 |  | 
 | 	if (netif_running(dev)) {  | 
 | 		printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;  | 
 | 		return -EIO ;  | 
 | 	} | 
 |  | 
 | 	memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ;  | 
 | 	 | 
 | 	if (olympic_priv->olympic_message_level) {  | 
 |  		printk(KERN_INFO "%s: MAC/LAA Set to  = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0], | 
 | 		olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2], | 
 | 		olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4], | 
 | 		olympic_priv->olympic_laa[5]); | 
 | 	}  | 
 |  | 
 | 	return 0 ;  | 
 | } | 
 |  | 
 | static void olympic_arb_cmd(struct net_device *dev) | 
 | { | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; | 
 | 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | 
 | 	u8 __iomem *arb_block, *asb_block, *srb  ;  | 
 | 	u8 header_len ;  | 
 | 	u16 frame_len, buffer_len ; | 
 | 	struct sk_buff *mac_frame ;   | 
 | 	u8 __iomem *buf_ptr ; | 
 | 	u8 __iomem *frame_data ;   | 
 | 	u16 buff_off ;  | 
 | 	u16 lan_status = 0, lan_status_diff  ; /* Initialize to stop compiler warning */ | 
 | 	u8 fdx_prot_error ;  | 
 | 	u16 next_ptr; | 
 |  | 
 | 	arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ;  | 
 | 	asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ;  | 
 | 	srb = (olympic_priv->olympic_lap + olympic_priv->srb) ;  | 
 | 	 | 
 | 	if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ | 
 |  | 
 | 		header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */	 | 
 | 		frame_len = swab16(readw(arb_block + 10)) ;  | 
 |  | 
 | 		buff_off = swab16(readw(arb_block + 6)) ; | 
 | 		 | 
 | 		buf_ptr = olympic_priv->olympic_lap + buff_off ;  | 
 |  | 
 | #if OLYMPIC_DEBUG | 
 | { | 
 | 		int i; | 
 | 		frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;  | 
 |  | 
 | 		for (i=0 ;  i < 14 ; i++) {  | 
 | 			printk("Loc %d = %02x\n",i,readb(frame_data + i));  | 
 | 		} | 
 |  | 
 | 		printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));  | 
 | } | 
 | #endif  | 
 | 		mac_frame = dev_alloc_skb(frame_len) ;  | 
 | 		if (!mac_frame) { | 
 | 			printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name); | 
 | 			goto drop_frame; | 
 | 		} | 
 |  | 
 | 		/* Walk the buffer chain, creating the frame */ | 
 |  | 
 | 		do { | 
 | 			frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;  | 
 | 			buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));  | 
 | 			memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ; | 
 | 			next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next));  | 
 | 		} while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr))); | 
 |  | 
 | 		if (olympic_priv->olympic_network_monitor) {  | 
 | 			struct trh_hdr *mac_hdr ;  | 
 | 			printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ; | 
 | 			mac_hdr = (struct trh_hdr *)mac_frame->data ;  | 
 | 			printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ;  | 
 | 			printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ;  | 
 | 		} | 
 | 		mac_frame->dev = dev ;  | 
 | 		mac_frame->protocol = tr_type_trans(mac_frame,dev); | 
 | 		netif_rx(mac_frame) ; 	 | 
 | 		dev->last_rx = jiffies; | 
 |  | 
 | drop_frame: | 
 | 		/* Now tell the card we have dealt with the received frame */ | 
 |  | 
 | 		/* Set LISR Bit 1 */ | 
 | 		writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM); | 
 |  | 
 | 		/* Is the ASB free ? */ 	 | 
 | 		 | 
 | 		if (readb(asb_block + 2) != 0xff) {  | 
 | 			olympic_priv->asb_queued = 1 ;  | 
 | 			writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);  | 
 | 			return ; 	 | 
 | 			/* Drop out and wait for the bottom half to be run */ | 
 | 		} | 
 | 		 | 
 | 		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ | 
 | 		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ | 
 | 		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ | 
 | 		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		 | 
 |  | 
 | 		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); | 
 | 		 | 
 | 		olympic_priv->asb_queued = 2 ;  | 
 | 	 | 
 | 		return ; 	 | 
 | 		 | 
 | 	} else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ | 
 | 		lan_status = swab16(readw(arb_block+6)); | 
 | 		fdx_prot_error = readb(arb_block+8) ;  | 
 | 		 | 
 | 		/* Issue ARB Free */ | 
 | 		writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM); | 
 |  | 
 | 		lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ;  | 
 |  | 
 | 		if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {  | 
 | 			if (lan_status_diff & LSC_LWF)  | 
 | 					printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); | 
 | 			if (lan_status_diff & LSC_ARW)  | 
 | 					printk(KERN_WARNING "%s: Auto removal error\n",dev->name); | 
 | 			if (lan_status_diff & LSC_FPE) | 
 | 					printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); | 
 | 			if (lan_status_diff & LSC_RR)  | 
 | 					printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); | 
 | 		 | 
 | 			/* Adapter has been closed by the hardware */ | 
 | 		 | 
 | 			/* reset tx/rx fifo's and busmaster logic */ | 
 |  | 
 | 			writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); | 
 | 			udelay(1); | 
 | 			writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); | 
 | 			netif_stop_queue(dev); | 
 | 			olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ;  | 
 | 			printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ;  | 
 | 		} /* If serious error */ | 
 | 		 | 
 | 		if (olympic_priv->olympic_message_level) {  | 
 | 			if (lan_status_diff & LSC_SIG_LOSS)  | 
 | 					printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ;  | 
 | 			if (lan_status_diff & LSC_HARD_ERR) | 
 | 					printk(KERN_INFO "%s: Beaconing \n",dev->name); | 
 | 			if (lan_status_diff & LSC_SOFT_ERR) | 
 | 					printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name); | 
 | 			if (lan_status_diff & LSC_TRAN_BCN)  | 
 | 					printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name); | 
 | 			if (lan_status_diff & LSC_SS)  | 
 | 					printk(KERN_INFO "%s: Single Station on the ring \n", dev->name); | 
 | 			if (lan_status_diff & LSC_RING_REC) | 
 | 					printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); | 
 | 			if (lan_status_diff & LSC_FDX_MODE) | 
 | 					printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); | 
 | 		} 	 | 
 | 		 | 
 | 		if (lan_status_diff & LSC_CO) {  | 
 | 					 | 
 | 				if (olympic_priv->olympic_message_level)  | 
 | 					printk(KERN_INFO "%s: Counter Overflow \n", dev->name); | 
 | 					 | 
 | 				/* Issue READ.LOG command */ | 
 |  | 
 | 				writeb(SRB_READ_LOG, srb); | 
 | 				writeb(0,srb+1); | 
 | 				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | 
 | 				writeb(0,srb+3); | 
 | 				writeb(0,srb+4); | 
 | 				writeb(0,srb+5); | 
 | 					 | 
 | 				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | 
 |  | 
 | 				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 | 					 | 
 | 		} | 
 |  | 
 | 		if (lan_status_diff & LSC_SR_CO) {  | 
 |  | 
 | 				if (olympic_priv->olympic_message_level) | 
 | 					printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); | 
 |  | 
 | 				/* Issue a READ.SR.COUNTERS */ | 
 | 				 | 
 | 				writeb(SRB_READ_SR_COUNTERS,srb); | 
 | 				writeb(0,srb+1); | 
 | 				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | 
 | 				writeb(0,srb+3); | 
 | 				 | 
 | 				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | 
 |  | 
 | 				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | 
 |  | 
 | 		} | 
 |  | 
 | 		olympic_priv->olympic_lan_status = lan_status ;  | 
 | 	 | 
 | 	}  /* Lan.change.status */ | 
 | 	else | 
 | 		printk(KERN_WARNING "%s: Unknown arb command \n", dev->name); | 
 | } | 
 |  | 
 | static void olympic_asb_bh(struct net_device *dev)  | 
 | { | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;  | 
 | 	u8 __iomem *arb_block, *asb_block ;  | 
 |  | 
 | 	arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ;  | 
 | 	asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ;  | 
 |  | 
 | 	if (olympic_priv->asb_queued == 1) {   /* Dropped through the first time */ | 
 |  | 
 | 		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ | 
 | 		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ | 
 | 		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ | 
 | 		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		 | 
 |  | 
 | 		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); | 
 | 		olympic_priv->asb_queued = 2 ;  | 
 |  | 
 | 		return ;  | 
 | 	} | 
 |  | 
 | 	if (olympic_priv->asb_queued == 2) {  | 
 | 		switch (readb(asb_block+2)) { | 
 | 			case 0x01: | 
 | 				printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name); | 
 | 				break ; | 
 | 			case 0x26: | 
 | 				printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name); | 
 | 				break ; | 
 | 			case 0xFF: | 
 | 				/* Valid response, everything should be ok again */ | 
 | 				break ; | 
 | 			default: | 
 | 				printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name); | 
 | 				break ; | 
 | 		} | 
 | 	} | 
 | 	olympic_priv->asb_queued = 0 ;  | 
 | } | 
 |   | 
 | static int olympic_change_mtu(struct net_device *dev, int mtu)  | 
 | { | 
 | 	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; | 
 | 	u16 max_mtu ;  | 
 |  | 
 | 	if (olympic_priv->olympic_ring_speed == 4) | 
 | 		max_mtu = 4500 ;  | 
 | 	else | 
 | 		max_mtu = 18000 ;  | 
 | 	 | 
 | 	if (mtu > max_mtu) | 
 | 		return -EINVAL ;  | 
 | 	if (mtu < 100)  | 
 | 		return -EINVAL ;  | 
 |  | 
 | 	dev->mtu = mtu ;  | 
 | 	olympic_priv->pkt_buf_sz = mtu + TR_HLEN ;  | 
 |  | 
 | 	return 0 ;  | 
 | } | 
 |  | 
 | static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) | 
 | { | 
 | 	struct net_device *dev = (struct net_device *)data ;  | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 | 	u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;  | 
 | 	u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;  | 
 | 	int size = 0 ;  | 
 | 	int len=0; | 
 | 	off_t begin=0; | 
 | 	off_t pos=0; | 
 | 	 | 
 | 	size = sprintf(buffer,  | 
 | 		"IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name); | 
 | 	size += sprintf(buffer+size, "\n%6s: Adapter Address   : Node Address      : Functional Addr\n", | 
 |  	   dev->name);  | 
 |  | 
 | 	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n", | 
 | 	   dev->name, | 
 |            dev->dev_addr[0], | 
 | 	   dev->dev_addr[1], | 
 | 	   dev->dev_addr[2], | 
 |  	   dev->dev_addr[3], | 
 | 	   dev->dev_addr[4], | 
 | 	   dev->dev_addr[5], | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)),  | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),  | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), | 
 | 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); | 
 | 	  | 
 | 	size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name); | 
 |  | 
 | 	size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address   : Poll Address      : AccPri : Auth Src : Att Code :\n", | 
 | 	  dev->name) ;  | 
 | 	    | 
 | 	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x   : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x   : %04x     :  %04x    :\n", | 
 | 	  dev->name, | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code)))); | 
 |  | 
 | 	size += sprintf(buffer+size, "%6s: Source Address    : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", | 
 | 	  dev->name) ;  | 
 | 	 | 
 | 	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x  : %04x   : %04x   : %04x   : %04x    :     %04x     : \n", | 
 | 	  dev->name, | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl)))); | 
 |  | 
 | 	size += sprintf(buffer+size, "%6s: Beacon Details :  Tx  :  Rx  : NAUN Node Address : NAUN Node Phys : \n", | 
 | 	  dev->name) ;  | 
 |  | 
 | 	size += sprintf(buffer+size, "%6s:                :  %02x  :  %02x  : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x    : \n", | 
 | 	  dev->name, | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))), | 
 | 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2), | 
 | 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3)); | 
 |  | 
 | 	len=size; | 
 | 	pos=begin+size; | 
 | 	if (pos<offset) { | 
 | 		len=0; | 
 | 		begin=pos; | 
 | 	} | 
 | 	*start=buffer+(offset-begin);	/* Start of wanted data */ | 
 | 	len-=(offset-begin);		/* Start slop */ | 
 | 	if(len>length) | 
 | 		len=length;		/* Ending slop */ | 
 | 	return len; | 
 | } | 
 |  | 
 | static void __devexit olympic_remove_one(struct pci_dev *pdev)  | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev) ;  | 
 | 	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | 
 |  | 
 | 	if (olympic_priv->olympic_network_monitor) {  | 
 | 		char proc_name[20] ;  | 
 | 		strcpy(proc_name,"net/olympic_") ;  | 
 | 		strcat(proc_name,dev->name) ; | 
 | 		remove_proc_entry(proc_name,NULL);  | 
 | 	} | 
 | 	unregister_netdev(dev) ;  | 
 | 	iounmap(olympic_priv->olympic_mmio) ;  | 
 | 	iounmap(olympic_priv->olympic_lap) ;  | 
 | 	pci_release_regions(pdev) ; | 
 | 	pci_set_drvdata(pdev,NULL) ;  	 | 
 | 	free_netdev(dev) ;  | 
 | } | 
 |  | 
 | static struct pci_driver olympic_driver = {  | 
 | 	.name		= "olympic", | 
 | 	.id_table	= olympic_pci_tbl, | 
 | 	.probe		= olympic_probe, | 
 | 	.remove		= __devexit_p(olympic_remove_one), | 
 | }; | 
 |  | 
 | static int __init olympic_pci_init(void)  | 
 | { | 
 | 	return pci_module_init (&olympic_driver) ;  | 
 | } | 
 |  | 
 | static void __exit olympic_pci_cleanup(void) | 
 | { | 
 | 	pci_unregister_driver(&olympic_driver) ;  | 
 | }	 | 
 |  | 
 |  | 
 | module_init(olympic_pci_init) ;  | 
 | module_exit(olympic_pci_cleanup) ;  | 
 |  | 
 | MODULE_LICENSE("GPL"); |