diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index d36f991..7be3521 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -133,7 +133,7 @@
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index c4683aa..aec13c7 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -65,19 +65,102 @@
 /*************************************************************************
  * IXDP2800 PCI
  *************************************************************************/
+static void __init ixdp2800_slave_disable_pci_master(void)
+{
+	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+
+static void __init ixdp2800_master_wait_for_slave(void)
+{
+	volatile u32 *addr;
+
+	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
+			 "its BAR sizes\n");
+
+	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
+					PCI_BASE_ADDRESS_1);
+	do {
+		*addr = 0xffffffff;
+		cpu_relax();
+	} while (*addr != 0xfe000008);
+
+	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
+					PCI_BASE_ADDRESS_2);
+	do {
+		*addr = 0xffffffff;
+		cpu_relax();
+	} while (*addr != 0xc0000008);
+
+	/*
+	 * Configure the slave's SDRAM BAR by hand.
+	 */
+	*addr = 0x40000008;
+}
+
+static void __init ixdp2800_slave_wait_for_master_enable(void)
+{
+	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
+
+	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
+		cpu_relax();
+}
+
 void __init ixdp2800_pci_preinit(void)
 {
 	printk("ixdp2x00_pci_preinit called\n");
 
-	*IXP2000_PCI_ADDR_EXT =  0x0000e000;
+	*IXP2000_PCI_ADDR_EXT = 0x0001e000;
 
-	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
+	if (!ixdp2x00_master_npu())
+		ixdp2800_slave_disable_pci_master();
+
 	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
+	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
 
 	ixp2000_pci_preinit();
+
+	if (ixdp2x00_master_npu()) {
+		/*
+		 * Wait until the slave set its SRAM/SDRAM BAR sizes
+		 * correctly before we proceed to scan and enumerate
+		 * the bus.
+		 */
+		ixdp2800_master_wait_for_slave();
+
+		/*
+		 * We configure the SDRAM BARs by hand because they
+		 * are 1G and fall outside of the regular allocated
+		 * PCI address space.
+		 */
+		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
+	} else {
+		/*
+		 * Wait for the master to complete scanning the bus
+		 * and assigning resources before we proceed to scan
+		 * the bus ourselves.  Set pci=firmware to honor the
+		 * master's resource assignment.
+		 */
+		ixdp2800_slave_wait_for_master_enable();
+		pcibios_setup("firmware");
+	}
 }
 
-int ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
+/*
+ * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
+ * of the regular PCI window, because there's only 512M of outbound PCI
+ * memory window on each IXP, while we need 1G for each of the BARs.
+ */
+static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
+{
+	if (machine_is_ixdp2800()) {
+		dev->resource[2].start = 0;
+		dev->resource[2].end   = 0;
+		dev->resource[2].flags = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
+
+static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	sys->mem_offset = 0x00000000;
 
@@ -129,22 +212,47 @@
 	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
 }
 
-static void ixdp2800_pci_postinit(void)
+static void __init ixdp2800_master_enable_slave(void)
 {
-	struct pci_dev *dev;
+	volatile u32 *addr;
 
-	if (ixdp2x00_master_npu()) {
-		dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
-		pci_remove_bus_device(dev);
-	} else {
-		dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN);
-		pci_remove_bus_device(dev);
+	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
 
+	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
+					IXDP2X00_SLAVE_NPU_DEVFN,
+					PCI_COMMAND);
+
+	*addr |= PCI_COMMAND_MASTER;
+}
+
+static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
+{
+	volatile u32 *addr;
+
+	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
+
+	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
+					IXDP2X00_SLAVE_NPU_DEVFN,
+					PCI_COMMAND);
+	while ((*addr & PCI_COMMAND_MEMORY) == 0)
+		cpu_relax();
+}
+
+static void __init ixdp2800_slave_signal_bus_scan_completion(void)
+{
+	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
+	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
+}
+
+static void __init ixdp2800_pci_postinit(void)
+{
+	if (!ixdp2x00_master_npu()) {
 		ixdp2x00_slave_pci_postinit();
+		ixdp2800_slave_signal_bus_scan_completion();
 	}
 }
 
-struct hw_pci ixdp2800_pci __initdata = {
+struct __initdata hw_pci ixdp2800_pci __initdata = {
 	.nr_controllers	= 1,
 	.setup		= ixdp2800_pci_setup,
 	.preinit	= ixdp2800_pci_preinit,
@@ -155,8 +263,21 @@
 
 int __init ixdp2800_pci_init(void)
 {
-	if (machine_is_ixdp2800())
+	if (machine_is_ixdp2800()) {
+		struct pci_dev *dev;
+
 		pci_common_init(&ixdp2800_pci);
+		if (ixdp2x00_master_npu()) {
+			dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
+			pci_remove_bus_device(dev);
+
+			ixdp2800_master_enable_slave();
+			ixdp2800_master_wait_for_slave_bus_scan();
+		} else {
+			dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN);
+			pci_remove_bus_device(dev);
+		}
+	}
 
 	return 0;
 }