diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e43e023..b594768 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -105,7 +105,7 @@
 
 config BLK_DEV_XD
 	tristate "XT hard disk support"
-	depends on ISA
+	depends on ISA && ISA_DMA_API
 	help
 	  Very old 8 bit hard disk controllers used in the IBM XT computer
 	  will be supported if you say Y here.
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e162dab..2d5a19f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -153,7 +153,7 @@
 
 config ESPSERIAL
 	tristate "Hayes ESP serial port support"
-	depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
 	help
 	  This is a driver which supports Hayes ESP serial ports.  Both single
 	  port cards and multiport cards are supported.  Make sure to read
@@ -195,7 +195,7 @@
 
 config SYNCLINK
 	tristate "Microgate SyncLink card support"
-	depends on SERIAL_NONSTANDARD && PCI
+	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
 	help
 	  Provides support for the SyncLink ISA and PCI multiprotocol serial
 	  adapters. These adapters support asynchronous and HDLC bit
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 72f2b46..2e70d74 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -51,7 +51,7 @@
 
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
-	depends on MMC && ISA
+	depends on MMC && ISA && ISA_DMA_API
 	help
 	  This selects the Winbond(R) W83L51xD Secure digital and
           Multimedia card Interface.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 68242bd..3a0a55b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -589,7 +589,7 @@
 
 config ELPLUS
 	tristate "3c505 \"EtherLink Plus\" support"
-	depends on NET_VENDOR_3COM && ISA
+	depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
 	---help---
 	  Information about this network (Ethernet) card can be found in
 	  <file:Documentation/networking/3c505.txt>.  If you have a card of
@@ -630,7 +630,7 @@
 
 config 3C515
 	tristate "3c515 ISA \"Fast EtherLink\""
-	depends on NET_VENDOR_3COM && (ISA || EISA)
+	depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
 	help
 	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
 	  network card, say Y and read the Ethernet-HOWTO, available from
@@ -708,7 +708,7 @@
 
 config LANCE
 	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on NET_ETHERNET && ISA
+	depends on NET_ETHERNET && ISA && ISA_DMA_API
 	help
 	  If you have a network (Ethernet) card of this type, say Y and read
 	  the Ethernet-HOWTO, available from
@@ -864,7 +864,7 @@
 
 config NI65
 	tristate "NI6510 support"
-	depends on NET_VENDOR_RACAL && ISA
+	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
 	help
 	  If you have a network (Ethernet) card of this type, say Y and read
 	  the Ethernet-HOWTO, available from
@@ -1072,7 +1072,7 @@
 
 config ZNET
 	tristate "Zenith Z-Note support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL
+	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
 	help
 	  The Zenith Z-Note notebook computer has a built-in network
 	  (Ethernet) card, and this is the Linux driver for it. Note that the
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 60b1967..69c488d 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -13,7 +13,7 @@
 
 config LTPC
 	tristate "Apple/Farallon LocalTalk PC support"
-	depends on DEV_APPLETALK && (ISA || EISA)
+	depends on DEV_APPLETALK && (ISA || EISA) && ISA_DMA_API
 	help
 	  This allows you to use the AppleTalk PC card to connect to LocalTalk
 	  networks. The card is also known as the Farallon PhoneNet PC card.
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 34068f8..7cdebe1 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -45,7 +45,7 @@
 
 config DMASCC
 	tristate "High-speed (DMA) SCC driver for AX.25"
-	depends on ISA && AX25 && BROKEN_ON_SMP
+	depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
 	---help---
 	  This is a driver for high-speed SCC boards, i.e. those supporting
 	  DMA on one port. You usually use those boards to connect your
@@ -78,7 +78,7 @@
 
 config SCC
 	tristate "Z8530 SCC driver"
-	depends on ISA && AX25
+	depends on ISA && AX25 && ISA_DMA_API
 	---help---
 	  These cards are used to connect your Linux box to an amateur radio
 	  in order to communicate with other computers. If you want to use
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 3579193..66b9466 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -26,7 +26,7 @@
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on WAN && ISA && m
+	depends on WAN && ISA && m && ISA_DMA_API
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
@@ -38,7 +38,7 @@
 # The COSA/SRP driver has not been tested as non-modular yet.
 config COSA
 	tristate "COSA/SRP sync serial boards support"
-	depends on WAN && ISA && m
+	depends on WAN && ISA && m && ISA_DMA_API
 	---help---
 	  Driver for COSA and SRP synchronous serial boards.
 
@@ -127,7 +127,7 @@
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on WAN && ISA && m
+	depends on WAN && ISA && m && ISA_DMA_API
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 750b11c..1811cb2 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -260,7 +260,7 @@
 
 config SCSI_7000FASST
 	tristate "7000FASST SCSI support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	help
 	  This driver supports the Western Digital 7000 SCSI host adapter
 	  family.  Some information is in the source:
@@ -295,7 +295,7 @@
 
 config SCSI_AHA1542
 	tristate "Adaptec AHA1542 support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	---help---
 	  This is support for a SCSI host adapter.  It is explained in section
 	  3.4 of the SCSI-HOWTO, available from
@@ -515,7 +515,7 @@
 
 config SCSI_BUSLOGIC
 	tristate "BusLogic SCSI support"
-	depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
+	depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
 	---help---
 	  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
 	  Adapters. Consult the SCSI-HOWTO, available from
@@ -571,7 +571,7 @@
 
 config SCSI_EATA
 	tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
-	depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
 	---help---
 	  This driver supports all EATA/DMA-compliant SCSI host adapters.  DPT
 	  ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -665,7 +665,7 @@
 
 config SCSI_GDTH
 	tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
-	depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
 	---help---
 	  Formerly called GDT SCSI Disk Array Controller Support.
 
@@ -1416,7 +1416,7 @@
 
 config SCSI_U14_34F
 	tristate "UltraStor 14F/34F support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	---help---
 	  This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
 	  The source at <file:drivers/scsi/u14-34f.c> contains some