| /* | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved. | 
 |  */ | 
 |  | 
 | #ifndef _LINUX_IOC4_H | 
 | #define _LINUX_IOC4_H | 
 |  | 
 | #include <linux/interrupt.h> | 
 |  | 
 | /*************** | 
 |  * Definitions * | 
 |  ***************/ | 
 |  | 
 | /* Miscellaneous values inherent to hardware */ | 
 |  | 
 | #define IOC4_EXTINT_COUNT_DIVISOR 520	/* PCI clocks per COUNT tick */ | 
 |  | 
 | /*********************************** | 
 |  * Structures needed by subdrivers * | 
 |  ***********************************/ | 
 |  | 
 | /* This structure fully describes the IOC4 miscellaneous registers which | 
 |  * appear at bar[0]+0x00000 through bar[0]+0x0005c.  The corresponding | 
 |  * PCI resource is managed by the main IOC4 driver because it contains | 
 |  * registers of interest to many different IOC4 subdrivers. | 
 |  */ | 
 | struct ioc4_misc_regs { | 
 | 	/* Miscellaneous IOC4 registers */ | 
 | 	union ioc4_pci_err_addr_l { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t valid:1;	/* Address captured */ | 
 | 			uint32_t master_id:4;	/* Unit causing error | 
 | 						 * 0/1: Serial port 0 TX/RX | 
 | 						 * 2/3: Serial port 1 TX/RX | 
 | 						 * 4/5: Serial port 2 TX/RX | 
 | 						 * 6/7: Serial port 3 TX/RX | 
 | 						 * 8: ATA/ATAPI | 
 | 						 * 9-15: Undefined | 
 | 						 */ | 
 | 			uint32_t mul_err:1;	/* Multiple errors occurred */ | 
 | 			uint32_t addr:26;	/* Bits 31-6 of error addr */ | 
 | 		} fields; | 
 | 	} pci_err_addr_l; | 
 | 	uint32_t pci_err_addr_h;	/* Bits 63-32 of error addr */ | 
 | 	union ioc4_sio_int { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint8_t tx_mt:1;	/* TX ring buffer empty */ | 
 | 			uint8_t rx_full:1;	/* RX ring buffer full */ | 
 | 			uint8_t rx_high:1;	/* RX high-water exceeded */ | 
 | 			uint8_t rx_timer:1;	/* RX timer has triggered */ | 
 | 			uint8_t delta_dcd:1;	/* DELTA_DCD seen */ | 
 | 			uint8_t delta_cts:1;	/* DELTA_CTS seen */ | 
 | 			uint8_t intr_pass:1;	/* Interrupt pass-through */ | 
 | 			uint8_t tx_explicit:1;	/* TX, MCW, or delay complete */ | 
 | 		} fields[4]; | 
 | 	} sio_ir;		/* Serial interrupt state */ | 
 | 	union ioc4_other_int { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t ata_int:1;	/* ATA port passthru */ | 
 | 			uint32_t ata_memerr:1;	/* ATA halted by mem error */ | 
 | 			uint32_t memerr:4;	/* Serial halted by mem err */ | 
 | 			uint32_t kbd_int:1;	/* kbd/mouse intr asserted */ | 
 | 			uint32_t reserved:16;	/* zero */ | 
 | 			uint32_t rt_int:1;	/* INT_OUT section latch */ | 
 | 			uint32_t gen_int:8;	/* Intr. from generic pins */ | 
 | 		} fields; | 
 | 	} other_ir;		/* Other interrupt state */ | 
 | 	union ioc4_sio_int sio_ies;	/* Serial interrupt enable set */ | 
 | 	union ioc4_other_int other_ies;	/* Other interrupt enable set */ | 
 | 	union ioc4_sio_int sio_iec;	/* Serial interrupt enable clear */ | 
 | 	union ioc4_other_int other_iec;	/* Other interrupt enable clear */ | 
 | 	union ioc4_sio_cr { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t cmd_pulse:4;	/* Bytebus strobe width */ | 
 | 			uint32_t arb_diag:3;	/* PCI bus requester */ | 
 | 			uint32_t sio_diag_idle:1;	/* Active ser req? */ | 
 | 			uint32_t ata_diag_idle:1;	/* Active ATA req? */ | 
 | 			uint32_t ata_diag_active:1;	/* ATA req is winner */ | 
 | 			uint32_t reserved:22;	/* zero */ | 
 | 		} fields; | 
 | 	} sio_cr; | 
 | 	uint32_t unused1; | 
 | 	union ioc4_int_out { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t count:16;	/* Period control */ | 
 | 			uint32_t mode:3;	/* Output signal shape */ | 
 | 			uint32_t reserved:11;	/* zero */ | 
 | 			uint32_t diag:1;	/* Timebase control */ | 
 | 			uint32_t int_out:1;	/* Current value */ | 
 | 		} fields; | 
 | 	} int_out;		/* External interrupt output control */ | 
 | 	uint32_t unused2; | 
 | 	union ioc4_gpcr { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t dir:8;	/* Pin direction */ | 
 | 			uint32_t edge:8;	/* Edge/level mode */ | 
 | 			uint32_t reserved1:4;	/* zero */ | 
 | 			uint32_t int_out_en:1;	/* INT_OUT enable */ | 
 | 			uint32_t reserved2:11;	/* zero */ | 
 | 		} fields; | 
 | 	} gpcr_s;		/* Generic PIO control set */ | 
 | 	union ioc4_gpcr gpcr_c;	/* Generic PIO control clear */ | 
 | 	union ioc4_gpdr { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t gen_pin:8;	/* State of pins */ | 
 | 			uint32_t reserved:24; | 
 | 		} fields; | 
 | 	} gpdr;			/* Generic PIO data */ | 
 | 	uint32_t unused3; | 
 | 	union ioc4_gppr { | 
 | 		uint32_t raw; | 
 | 		struct { | 
 | 			uint32_t gen_pin:1;	/* Single pin state */ | 
 | 			uint32_t reserved:31; | 
 | 		} fields; | 
 | 	} gppr[8];		/* Generic PIO pins */ | 
 | }; | 
 |  | 
 | /* Masks for GPCR DIR pins */ | 
 | #define IOC4_GPCR_DIR_0 0x01	/* External interrupt output */ | 
 | #define IOC4_GPCR_DIR_1 0x02	/* External interrupt input */ | 
 | #define IOC4_GPCR_DIR_2 0x04 | 
 | #define IOC4_GPCR_DIR_3 0x08	/* Keyboard/mouse presence */ | 
 | #define IOC4_GPCR_DIR_4 0x10	/* Ser. port 0 xcvr select (0=232, 1=422) */ | 
 | #define IOC4_GPCR_DIR_5 0x20	/* Ser. port 1 xcvr select (0=232, 1=422) */ | 
 | #define IOC4_GPCR_DIR_6 0x40	/* Ser. port 2 xcvr select (0=232, 1=422) */ | 
 | #define IOC4_GPCR_DIR_7 0x80	/* Ser. port 3 xcvr select (0=232, 1=422) */ | 
 |  | 
 | /* Masks for GPCR EDGE pins */ | 
 | #define IOC4_GPCR_EDGE_0 0x01 | 
 | #define IOC4_GPCR_EDGE_1 0x02	/* External interrupt input */ | 
 | #define IOC4_GPCR_EDGE_2 0x04 | 
 | #define IOC4_GPCR_EDGE_3 0x08 | 
 | #define IOC4_GPCR_EDGE_4 0x10 | 
 | #define IOC4_GPCR_EDGE_5 0x20 | 
 | #define IOC4_GPCR_EDGE_6 0x40 | 
 | #define IOC4_GPCR_EDGE_7 0x80 | 
 |  | 
 | #define IOC4_VARIANT_IO9	0x0900 | 
 | #define IOC4_VARIANT_PCI_RT	0x0901 | 
 | #define IOC4_VARIANT_IO10	0x1000 | 
 |  | 
 | /* One of these per IOC4 */ | 
 | struct ioc4_driver_data { | 
 | 	struct list_head idd_list; | 
 | 	unsigned long idd_bar0; | 
 | 	struct pci_dev *idd_pdev; | 
 | 	const struct pci_device_id *idd_pci_id; | 
 | 	struct ioc4_misc_regs __iomem *idd_misc_regs; | 
 | 	unsigned long count_period; | 
 | 	void *idd_serial_data; | 
 | 	unsigned int idd_variant; | 
 | }; | 
 |  | 
 | /* One per submodule */ | 
 | struct ioc4_submodule { | 
 | 	struct list_head is_list; | 
 | 	char *is_name; | 
 | 	struct module *is_owner; | 
 | 	int (*is_probe) (struct ioc4_driver_data *); | 
 | 	int (*is_remove) (struct ioc4_driver_data *); | 
 | }; | 
 |  | 
 | #define IOC4_NUM_CARDS		8	/* max cards per partition */ | 
 |  | 
 | /********************************** | 
 |  * Functions needed by submodules * | 
 |  **********************************/ | 
 |  | 
 | extern int ioc4_register_submodule(struct ioc4_submodule *); | 
 | extern void ioc4_unregister_submodule(struct ioc4_submodule *); | 
 |  | 
 | #endif				/* _LINUX_IOC4_H */ |