|  | /* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $ | 
|  | * ebus.c: PCI to EBus bridge device. | 
|  | * | 
|  | * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be) | 
|  | * Copyright (C) 1999  David S. Miller (davem@redhat.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include <asm/system.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pbm.h> | 
|  | #include <asm/ebus.h> | 
|  | #include <asm/oplib.h> | 
|  | #include <asm/bpp.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | /* EBUS dma library. */ | 
|  |  | 
|  | #define EBDMA_CSR	0x00UL	/* Control/Status */ | 
|  | #define EBDMA_ADDR	0x04UL	/* DMA Address */ | 
|  | #define EBDMA_COUNT	0x08UL	/* DMA Count */ | 
|  |  | 
|  | #define EBDMA_CSR_INT_PEND	0x00000001 | 
|  | #define EBDMA_CSR_ERR_PEND	0x00000002 | 
|  | #define EBDMA_CSR_DRAIN		0x00000004 | 
|  | #define EBDMA_CSR_INT_EN	0x00000010 | 
|  | #define EBDMA_CSR_RESET		0x00000080 | 
|  | #define EBDMA_CSR_WRITE		0x00000100 | 
|  | #define EBDMA_CSR_EN_DMA	0x00000200 | 
|  | #define EBDMA_CSR_CYC_PEND	0x00000400 | 
|  | #define EBDMA_CSR_DIAG_RD_DONE	0x00000800 | 
|  | #define EBDMA_CSR_DIAG_WR_DONE	0x00001000 | 
|  | #define EBDMA_CSR_EN_CNT	0x00002000 | 
|  | #define EBDMA_CSR_TC		0x00004000 | 
|  | #define EBDMA_CSR_DIS_CSR_DRN	0x00010000 | 
|  | #define EBDMA_CSR_BURST_SZ_MASK	0x000c0000 | 
|  | #define EBDMA_CSR_BURST_SZ_1	0x00080000 | 
|  | #define EBDMA_CSR_BURST_SZ_4	0x00000000 | 
|  | #define EBDMA_CSR_BURST_SZ_8	0x00040000 | 
|  | #define EBDMA_CSR_BURST_SZ_16	0x000c0000 | 
|  | #define EBDMA_CSR_DIAG_EN	0x00100000 | 
|  | #define EBDMA_CSR_DIS_ERR_PEND	0x00400000 | 
|  | #define EBDMA_CSR_TCI_DIS	0x00800000 | 
|  | #define EBDMA_CSR_EN_NEXT	0x01000000 | 
|  | #define EBDMA_CSR_DMA_ON	0x02000000 | 
|  | #define EBDMA_CSR_A_LOADED	0x04000000 | 
|  | #define EBDMA_CSR_NA_LOADED	0x08000000 | 
|  | #define EBDMA_CSR_DEV_ID_MASK	0xf0000000 | 
|  |  | 
|  | #define EBUS_DMA_RESET_TIMEOUT	10000 | 
|  |  | 
|  | static void __ebus_dma_reset(struct ebus_dma_info *p, int no_drain) | 
|  | { | 
|  | int i; | 
|  | u32 val = 0; | 
|  |  | 
|  | writel(EBDMA_CSR_RESET, p->regs + EBDMA_CSR); | 
|  | udelay(1); | 
|  |  | 
|  | if (no_drain) | 
|  | return; | 
|  |  | 
|  | for (i = EBUS_DMA_RESET_TIMEOUT; i > 0; i--) { | 
|  | val = readl(p->regs + EBDMA_CSR); | 
|  |  | 
|  | if (!(val & (EBDMA_CSR_DRAIN | EBDMA_CSR_CYC_PEND))) | 
|  | break; | 
|  | udelay(10); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t ebus_dma_irq(int irq, void *dev_id, struct pt_regs *regs) | 
|  | { | 
|  | struct ebus_dma_info *p = dev_id; | 
|  | unsigned long flags; | 
|  | u32 csr = 0; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | csr = readl(p->regs + EBDMA_CSR); | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  |  | 
|  | if (csr & EBDMA_CSR_ERR_PEND) { | 
|  | printk(KERN_CRIT "ebus_dma(%s): DMA error!\n", p->name); | 
|  | p->callback(p, EBUS_DMA_EVENT_ERROR, p->client_cookie); | 
|  | return IRQ_HANDLED; | 
|  | } else if (csr & EBDMA_CSR_INT_PEND) { | 
|  | p->callback(p, | 
|  | (csr & EBDMA_CSR_TC) ? | 
|  | EBUS_DMA_EVENT_DMA : EBUS_DMA_EVENT_DEVICE, | 
|  | p->client_cookie); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | return IRQ_NONE; | 
|  |  | 
|  | } | 
|  |  | 
|  | int ebus_dma_register(struct ebus_dma_info *p) | 
|  | { | 
|  | u32 csr; | 
|  |  | 
|  | if (!p->regs) | 
|  | return -EINVAL; | 
|  | if (p->flags & ~(EBUS_DMA_FLAG_USE_EBDMA_HANDLER | | 
|  | EBUS_DMA_FLAG_TCI_DISABLE)) | 
|  | return -EINVAL; | 
|  | if ((p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) && !p->callback) | 
|  | return -EINVAL; | 
|  | if (!strlen(p->name)) | 
|  | return -EINVAL; | 
|  |  | 
|  | __ebus_dma_reset(p, 1); | 
|  |  | 
|  | csr = EBDMA_CSR_BURST_SZ_16 | EBDMA_CSR_EN_CNT; | 
|  |  | 
|  | if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE) | 
|  | csr |= EBDMA_CSR_TCI_DIS; | 
|  |  | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_register); | 
|  |  | 
|  | int ebus_dma_irq_enable(struct ebus_dma_info *p, int on) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 csr; | 
|  |  | 
|  | if (on) { | 
|  | if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) { | 
|  | if (request_irq(p->irq, ebus_dma_irq, SA_SHIRQ, p->name, p)) | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | csr = readl(p->regs + EBDMA_CSR); | 
|  | csr |= EBDMA_CSR_INT_EN; | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } else { | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | csr = readl(p->regs + EBDMA_CSR); | 
|  | csr &= ~EBDMA_CSR_INT_EN; | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  |  | 
|  | if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) { | 
|  | free_irq(p->irq, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_irq_enable); | 
|  |  | 
|  | void ebus_dma_unregister(struct ebus_dma_info *p) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 csr; | 
|  | int irq_on = 0; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | csr = readl(p->regs + EBDMA_CSR); | 
|  | if (csr & EBDMA_CSR_INT_EN) { | 
|  | csr &= ~EBDMA_CSR_INT_EN; | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  | irq_on = 1; | 
|  | } | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  |  | 
|  | if (irq_on) | 
|  | free_irq(p->irq, p); | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_unregister); | 
|  |  | 
|  | int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, size_t len) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 csr; | 
|  | int err; | 
|  |  | 
|  | if (len >= (1 << 24)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | csr = readl(p->regs + EBDMA_CSR); | 
|  | err = -EINVAL; | 
|  | if (!(csr & EBDMA_CSR_EN_DMA)) | 
|  | goto out; | 
|  | err = -EBUSY; | 
|  | if (csr & EBDMA_CSR_NA_LOADED) | 
|  | goto out; | 
|  |  | 
|  | writel(len,      p->regs + EBDMA_COUNT); | 
|  | writel(bus_addr, p->regs + EBDMA_ADDR); | 
|  | err = 0; | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_request); | 
|  |  | 
|  | void ebus_dma_prepare(struct ebus_dma_info *p, int write) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 csr; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | __ebus_dma_reset(p, 0); | 
|  |  | 
|  | csr = (EBDMA_CSR_INT_EN | | 
|  | EBDMA_CSR_EN_CNT | | 
|  | EBDMA_CSR_BURST_SZ_16 | | 
|  | EBDMA_CSR_EN_NEXT); | 
|  |  | 
|  | if (write) | 
|  | csr |= EBDMA_CSR_WRITE; | 
|  | if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE) | 
|  | csr |= EBDMA_CSR_TCI_DIS; | 
|  |  | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  |  | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_prepare); | 
|  |  | 
|  | unsigned int ebus_dma_residue(struct ebus_dma_info *p) | 
|  | { | 
|  | return readl(p->regs + EBDMA_COUNT); | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_residue); | 
|  |  | 
|  | unsigned int ebus_dma_addr(struct ebus_dma_info *p) | 
|  | { | 
|  | return readl(p->regs + EBDMA_ADDR); | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_addr); | 
|  |  | 
|  | void ebus_dma_enable(struct ebus_dma_info *p, int on) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 orig_csr, csr; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | orig_csr = csr = readl(p->regs + EBDMA_CSR); | 
|  | if (on) | 
|  | csr |= EBDMA_CSR_EN_DMA; | 
|  | else | 
|  | csr &= ~EBDMA_CSR_EN_DMA; | 
|  | if ((orig_csr & EBDMA_CSR_EN_DMA) != | 
|  | (csr & EBDMA_CSR_EN_DMA)) | 
|  | writel(csr, p->regs + EBDMA_CSR); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  | EXPORT_SYMBOL(ebus_dma_enable); | 
|  |  | 
|  | struct linux_ebus *ebus_chain = NULL; | 
|  |  | 
|  | #ifdef CONFIG_SUN_AUXIO | 
|  | extern void auxio_probe(void); | 
|  | #endif | 
|  |  | 
|  | static inline void *ebus_alloc(size_t size) | 
|  | { | 
|  | void *mem; | 
|  |  | 
|  | mem = kmalloc(size, GFP_ATOMIC); | 
|  | if (!mem) | 
|  | panic("ebus_alloc: out of memory"); | 
|  | memset((char *)mem, 0, size); | 
|  | return mem; | 
|  | } | 
|  |  | 
|  | static void __init ebus_ranges_init(struct linux_ebus *ebus) | 
|  | { | 
|  | int success; | 
|  |  | 
|  | ebus->num_ebus_ranges = 0; | 
|  | success = prom_getproperty(ebus->prom_node, "ranges", | 
|  | (char *)ebus->ebus_ranges, | 
|  | sizeof(ebus->ebus_ranges)); | 
|  | if (success != -1) | 
|  | ebus->num_ebus_ranges = (success/sizeof(struct linux_prom_ebus_ranges)); | 
|  | } | 
|  |  | 
|  | static void __init ebus_intmap_init(struct linux_ebus *ebus) | 
|  | { | 
|  | int success; | 
|  |  | 
|  | ebus->num_ebus_intmap = 0; | 
|  | success = prom_getproperty(ebus->prom_node, "interrupt-map", | 
|  | (char *)ebus->ebus_intmap, | 
|  | sizeof(ebus->ebus_intmap)); | 
|  | if (success == -1) | 
|  | return; | 
|  |  | 
|  | ebus->num_ebus_intmap = (success/sizeof(struct linux_prom_ebus_intmap)); | 
|  |  | 
|  | success = prom_getproperty(ebus->prom_node, "interrupt-map-mask", | 
|  | (char *)&ebus->ebus_intmask, | 
|  | sizeof(ebus->ebus_intmask)); | 
|  | if (success == -1) { | 
|  | prom_printf("%s: can't get interrupt-map-mask\n", __FUNCTION__); | 
|  | prom_halt(); | 
|  | } | 
|  | } | 
|  |  | 
|  | int __init ebus_intmap_match(struct linux_ebus *ebus, | 
|  | struct linux_prom_registers *reg, | 
|  | int *interrupt) | 
|  | { | 
|  | unsigned int hi, lo, irq; | 
|  | int i; | 
|  |  | 
|  | if (!ebus->num_ebus_intmap) | 
|  | return 0; | 
|  |  | 
|  | hi = reg->which_io & ebus->ebus_intmask.phys_hi; | 
|  | lo = reg->phys_addr & ebus->ebus_intmask.phys_lo; | 
|  | irq = *interrupt & ebus->ebus_intmask.interrupt; | 
|  | for (i = 0; i < ebus->num_ebus_intmap; i++) { | 
|  | if ((ebus->ebus_intmap[i].phys_hi == hi) && | 
|  | (ebus->ebus_intmap[i].phys_lo == lo) && | 
|  | (ebus->ebus_intmap[i].interrupt == irq)) { | 
|  | *interrupt = ebus->ebus_intmap[i].cinterrupt; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | void __init fill_ebus_child(int node, struct linux_prom_registers *preg, | 
|  | struct linux_ebus_child *dev, int non_standard_regs) | 
|  | { | 
|  | int regs[PROMREG_MAX]; | 
|  | int irqs[PROMREG_MAX]; | 
|  | int i, len; | 
|  |  | 
|  | dev->prom_node = node; | 
|  | prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name)); | 
|  | printk(" (%s)", dev->prom_name); | 
|  |  | 
|  | len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); | 
|  | dev->num_addrs = len / sizeof(regs[0]); | 
|  |  | 
|  | if (non_standard_regs) { | 
|  | /* This is to handle reg properties which are not | 
|  | * in the parent relative format.  One example are | 
|  | * children of the i2c device on CompactPCI systems. | 
|  | * | 
|  | * So, for such devices we just record the property | 
|  | * raw in the child resources. | 
|  | */ | 
|  | for (i = 0; i < dev->num_addrs; i++) | 
|  | dev->resource[i].start = regs[i]; | 
|  | } else { | 
|  | for (i = 0; i < dev->num_addrs; i++) { | 
|  | int rnum = regs[i]; | 
|  | if (rnum >= dev->parent->num_addrs) { | 
|  | prom_printf("UGH: property for %s was %d, need < %d\n", | 
|  | dev->prom_name, len, dev->parent->num_addrs); | 
|  | panic(__FUNCTION__); | 
|  | } | 
|  | dev->resource[i].start = dev->parent->resource[i].start; | 
|  | dev->resource[i].end = dev->parent->resource[i].end; | 
|  | dev->resource[i].flags = IORESOURCE_MEM; | 
|  | dev->resource[i].name = dev->prom_name; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < PROMINTR_MAX; i++) | 
|  | dev->irqs[i] = PCI_IRQ_NONE; | 
|  |  | 
|  | len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs)); | 
|  | if ((len == -1) || (len == 0)) { | 
|  | dev->num_irqs = 0; | 
|  | /* | 
|  | * Oh, well, some PROMs don't export interrupts | 
|  | * property to children of EBus devices... | 
|  | * | 
|  | * Be smart about PS/2 keyboard and mouse. | 
|  | */ | 
|  | if (!strcmp(dev->parent->prom_name, "8042")) { | 
|  | if (!strcmp(dev->prom_name, "kb_ps2")) { | 
|  | dev->num_irqs = 1; | 
|  | dev->irqs[0] = dev->parent->irqs[0]; | 
|  | } else { | 
|  | dev->num_irqs = 1; | 
|  | dev->irqs[0] = dev->parent->irqs[1]; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | dev->num_irqs = len / sizeof(irqs[0]); | 
|  | for (i = 0; i < dev->num_irqs; i++) { | 
|  | struct pci_pbm_info *pbm = dev->bus->parent; | 
|  | struct pci_controller_info *p = pbm->parent; | 
|  |  | 
|  | if (ebus_intmap_match(dev->bus, preg, &irqs[i]) != -1) { | 
|  | dev->irqs[i] = p->irq_build(pbm, | 
|  | dev->bus->self, | 
|  | irqs[i]); | 
|  | } else { | 
|  | /* If we get a bogus interrupt property, just | 
|  | * record the raw value instead of punting. | 
|  | */ | 
|  | dev->irqs[i] = irqs[i]; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init child_regs_nonstandard(struct linux_ebus_device *dev) | 
|  | { | 
|  | if (!strcmp(dev->prom_name, "i2c") || | 
|  | !strcmp(dev->prom_name, "SUNW,lombus")) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __init fill_ebus_device(int node, struct linux_ebus_device *dev) | 
|  | { | 
|  | struct linux_prom_registers regs[PROMREG_MAX]; | 
|  | struct linux_ebus_child *child; | 
|  | int irqs[PROMINTR_MAX]; | 
|  | int i, n, len; | 
|  |  | 
|  | dev->prom_node = node; | 
|  | prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name)); | 
|  | printk(" [%s", dev->prom_name); | 
|  |  | 
|  | len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); | 
|  | if (len == -1) { | 
|  | dev->num_addrs = 0; | 
|  | goto probe_interrupts; | 
|  | } | 
|  |  | 
|  | if (len % sizeof(struct linux_prom_registers)) { | 
|  | prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", | 
|  | dev->prom_name, len, | 
|  | (int)sizeof(struct linux_prom_registers)); | 
|  | prom_halt(); | 
|  | } | 
|  | dev->num_addrs = len / sizeof(struct linux_prom_registers); | 
|  |  | 
|  | for (i = 0; i < dev->num_addrs; i++) { | 
|  | /* XXX Learn how to interpret ebus ranges... -DaveM */ | 
|  | if (regs[i].which_io >= 0x10) | 
|  | n = (regs[i].which_io - 0x10) >> 2; | 
|  | else | 
|  | n = regs[i].which_io; | 
|  |  | 
|  | dev->resource[i].start  = dev->bus->self->resource[n].start; | 
|  | dev->resource[i].start += (unsigned long)regs[i].phys_addr; | 
|  | dev->resource[i].end    = | 
|  | (dev->resource[i].start + (unsigned long)regs[i].reg_size - 1UL); | 
|  | dev->resource[i].flags  = IORESOURCE_MEM; | 
|  | dev->resource[i].name   = dev->prom_name; | 
|  | request_resource(&dev->bus->self->resource[n], | 
|  | &dev->resource[i]); | 
|  | } | 
|  |  | 
|  | probe_interrupts: | 
|  | for (i = 0; i < PROMINTR_MAX; i++) | 
|  | dev->irqs[i] = PCI_IRQ_NONE; | 
|  |  | 
|  | len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs)); | 
|  | if ((len == -1) || (len == 0)) { | 
|  | dev->num_irqs = 0; | 
|  | } else { | 
|  | dev->num_irqs = len / sizeof(irqs[0]); | 
|  | for (i = 0; i < dev->num_irqs; i++) { | 
|  | struct pci_pbm_info *pbm = dev->bus->parent; | 
|  | struct pci_controller_info *p = pbm->parent; | 
|  |  | 
|  | if (ebus_intmap_match(dev->bus, ®s[0], &irqs[i]) != -1) { | 
|  | dev->irqs[i] = p->irq_build(pbm, | 
|  | dev->bus->self, | 
|  | irqs[i]); | 
|  | } else { | 
|  | /* If we get a bogus interrupt property, just | 
|  | * record the raw value instead of punting. | 
|  | */ | 
|  | dev->irqs[i] = irqs[i]; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((node = prom_getchild(node))) { | 
|  | printk(" ->"); | 
|  | dev->children = ebus_alloc(sizeof(struct linux_ebus_child)); | 
|  |  | 
|  | child = dev->children; | 
|  | child->next = NULL; | 
|  | child->parent = dev; | 
|  | child->bus = dev->bus; | 
|  | fill_ebus_child(node, ®s[0], | 
|  | child, child_regs_nonstandard(dev)); | 
|  |  | 
|  | while ((node = prom_getsibling(node)) != 0) { | 
|  | child->next = ebus_alloc(sizeof(struct linux_ebus_child)); | 
|  |  | 
|  | child = child->next; | 
|  | child->next = NULL; | 
|  | child->parent = dev; | 
|  | child->bus = dev->bus; | 
|  | fill_ebus_child(node, ®s[0], | 
|  | child, child_regs_nonstandard(dev)); | 
|  | } | 
|  | } | 
|  | printk("]"); | 
|  | } | 
|  |  | 
|  | static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p) | 
|  | { | 
|  | struct pci_dev *pdev = start; | 
|  |  | 
|  | do { | 
|  | pdev = pci_find_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev); | 
|  | if (pdev && | 
|  | (pdev->device == PCI_DEVICE_ID_SUN_EBUS || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)) | 
|  | break; | 
|  | } while (pdev != NULL); | 
|  |  | 
|  | if (pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)) | 
|  | *is_rio_p = 1; | 
|  | else | 
|  | *is_rio_p = 0; | 
|  |  | 
|  | return pdev; | 
|  | } | 
|  |  | 
|  | void __init ebus_init(void) | 
|  | { | 
|  | struct pci_pbm_info *pbm; | 
|  | struct linux_ebus_device *dev; | 
|  | struct linux_ebus *ebus; | 
|  | struct pci_dev *pdev; | 
|  | struct pcidev_cookie *cookie; | 
|  | int nd, ebusnd, is_rio; | 
|  | int num_ebus = 0; | 
|  |  | 
|  | pdev = find_next_ebus(NULL, &is_rio); | 
|  | if (!pdev) { | 
|  | printk("ebus: No EBus's found.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cookie = pdev->sysdata; | 
|  | ebusnd = cookie->prom_node; | 
|  |  | 
|  | ebus_chain = ebus = ebus_alloc(sizeof(struct linux_ebus)); | 
|  | ebus->next = NULL; | 
|  | ebus->is_rio = is_rio; | 
|  |  | 
|  | while (ebusnd) { | 
|  | /* SUNW,pci-qfe uses four empty ebuses on it. | 
|  | I think we should not consider them here, | 
|  | as they have half of the properties this | 
|  | code expects and once we do PCI hot-plug, | 
|  | we'd have to tweak with the ebus_chain | 
|  | in the runtime after initialization. -jj */ | 
|  | if (!prom_getchild (ebusnd)) { | 
|  | pdev = find_next_ebus(pdev, &is_rio); | 
|  | if (!pdev) { | 
|  | if (ebus == ebus_chain) { | 
|  | ebus_chain = NULL; | 
|  | printk("ebus: No EBus's found.\n"); | 
|  | return; | 
|  | } | 
|  | break; | 
|  | } | 
|  | ebus->is_rio = is_rio; | 
|  | cookie = pdev->sysdata; | 
|  | ebusnd = cookie->prom_node; | 
|  | continue; | 
|  | } | 
|  | printk("ebus%d:", num_ebus); | 
|  |  | 
|  | prom_getstring(ebusnd, "name", ebus->prom_name, sizeof(ebus->prom_name)); | 
|  | ebus->index = num_ebus; | 
|  | ebus->prom_node = ebusnd; | 
|  | ebus->self = pdev; | 
|  | ebus->parent = pbm = cookie->pbm; | 
|  |  | 
|  | ebus_ranges_init(ebus); | 
|  | ebus_intmap_init(ebus); | 
|  |  | 
|  | nd = prom_getchild(ebusnd); | 
|  | if (!nd) | 
|  | goto next_ebus; | 
|  |  | 
|  | ebus->devices = ebus_alloc(sizeof(struct linux_ebus_device)); | 
|  |  | 
|  | dev = ebus->devices; | 
|  | dev->next = NULL; | 
|  | dev->children = NULL; | 
|  | dev->bus = ebus; | 
|  | fill_ebus_device(nd, dev); | 
|  |  | 
|  | while ((nd = prom_getsibling(nd)) != 0) { | 
|  | dev->next = ebus_alloc(sizeof(struct linux_ebus_device)); | 
|  |  | 
|  | dev = dev->next; | 
|  | dev->next = NULL; | 
|  | dev->children = NULL; | 
|  | dev->bus = ebus; | 
|  | fill_ebus_device(nd, dev); | 
|  | } | 
|  |  | 
|  | next_ebus: | 
|  | printk("\n"); | 
|  |  | 
|  | pdev = find_next_ebus(pdev, &is_rio); | 
|  | if (!pdev) | 
|  | break; | 
|  |  | 
|  | cookie = pdev->sysdata; | 
|  | ebusnd = cookie->prom_node; | 
|  |  | 
|  | ebus->next = ebus_alloc(sizeof(struct linux_ebus)); | 
|  | ebus = ebus->next; | 
|  | ebus->next = NULL; | 
|  | ebus->is_rio = is_rio; | 
|  | ++num_ebus; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SUN_AUXIO | 
|  | auxio_probe(); | 
|  | #endif | 
|  | } |