Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2004 IBM Corporation |
| 3 | * |
| 4 | * Authors: |
| 5 | * Leendert van Doorn <leendert@watson.ibm.com> |
| 6 | * Dave Safford <safford@watson.ibm.com> |
| 7 | * Reiner Sailer <sailer@watson.ibm.com> |
| 8 | * Kylene Hall <kjhall@us.ibm.com> |
| 9 | * |
| 10 | * Maintained by: <tpmdd_devel@lists.sourceforge.net> |
| 11 | * |
| 12 | * Device driver for TCG/TCPA TPM (trusted platform module). |
| 13 | * Specifications at www.trustedcomputinggroup.org |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or |
| 16 | * modify it under the terms of the GNU General Public License as |
| 17 | * published by the Free Software Foundation, version 2 of the |
| 18 | * License. |
| 19 | * |
| 20 | */ |
| 21 | |
| 22 | #include "tpm.h" |
| 23 | |
| 24 | /* Atmel definitions */ |
| 25 | #define TPM_ATML_BASE 0x400 |
| 26 | |
| 27 | /* write status bits */ |
| 28 | #define ATML_STATUS_ABORT 0x01 |
| 29 | #define ATML_STATUS_LASTBYTE 0x04 |
| 30 | |
| 31 | /* read status bits */ |
| 32 | #define ATML_STATUS_BUSY 0x01 |
| 33 | #define ATML_STATUS_DATA_AVAIL 0x02 |
| 34 | #define ATML_STATUS_REWRITE 0x04 |
| 35 | |
| 36 | |
| 37 | static int tpm_atml_recv(struct tpm_chip *chip, u8 * buf, size_t count) |
| 38 | { |
| 39 | u8 status, *hdr = buf; |
| 40 | u32 size; |
| 41 | int i; |
| 42 | __be32 *native_size; |
| 43 | |
| 44 | /* start reading header */ |
| 45 | if (count < 6) |
| 46 | return -EIO; |
| 47 | |
| 48 | for (i = 0; i < 6; i++) { |
| 49 | status = inb(chip->vendor->base + 1); |
| 50 | if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| 51 | dev_err(&chip->pci_dev->dev, |
| 52 | "error reading header\n"); |
| 53 | return -EIO; |
| 54 | } |
| 55 | *buf++ = inb(chip->vendor->base); |
| 56 | } |
| 57 | |
| 58 | /* size of the data received */ |
| 59 | native_size = (__force __be32 *) (hdr + 2); |
| 60 | size = be32_to_cpu(*native_size); |
| 61 | |
| 62 | if (count < size) { |
| 63 | dev_err(&chip->pci_dev->dev, |
| 64 | "Recv size(%d) less than available space\n", size); |
| 65 | for (; i < size; i++) { /* clear the waiting data anyway */ |
| 66 | status = inb(chip->vendor->base + 1); |
| 67 | if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| 68 | dev_err(&chip->pci_dev->dev, |
| 69 | "error reading data\n"); |
| 70 | return -EIO; |
| 71 | } |
| 72 | } |
| 73 | return -EIO; |
| 74 | } |
| 75 | |
| 76 | /* read all the data available */ |
| 77 | for (; i < size; i++) { |
| 78 | status = inb(chip->vendor->base + 1); |
| 79 | if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| 80 | dev_err(&chip->pci_dev->dev, |
| 81 | "error reading data\n"); |
| 82 | return -EIO; |
| 83 | } |
| 84 | *buf++ = inb(chip->vendor->base); |
| 85 | } |
| 86 | |
| 87 | /* make sure data available is gone */ |
| 88 | status = inb(chip->vendor->base + 1); |
| 89 | if (status & ATML_STATUS_DATA_AVAIL) { |
| 90 | dev_err(&chip->pci_dev->dev, "data available is stuck\n"); |
| 91 | return -EIO; |
| 92 | } |
| 93 | |
| 94 | return size; |
| 95 | } |
| 96 | |
| 97 | static int tpm_atml_send(struct tpm_chip *chip, u8 * buf, size_t count) |
| 98 | { |
| 99 | int i; |
| 100 | |
| 101 | dev_dbg(&chip->pci_dev->dev, "tpm_atml_send: "); |
| 102 | for (i = 0; i < count; i++) { |
| 103 | dev_dbg(&chip->pci_dev->dev, "0x%x(%d) ", buf[i], buf[i]); |
| 104 | outb(buf[i], chip->vendor->base); |
| 105 | } |
| 106 | |
| 107 | return count; |
| 108 | } |
| 109 | |
| 110 | static void tpm_atml_cancel(struct tpm_chip *chip) |
| 111 | { |
| 112 | outb(ATML_STATUS_ABORT, chip->vendor->base + 1); |
| 113 | } |
| 114 | |
| 115 | static struct file_operations atmel_ops = { |
| 116 | .owner = THIS_MODULE, |
| 117 | .llseek = no_llseek, |
| 118 | .open = tpm_open, |
| 119 | .read = tpm_read, |
| 120 | .write = tpm_write, |
| 121 | .release = tpm_release, |
| 122 | }; |
| 123 | |
| 124 | static struct tpm_vendor_specific tpm_atmel = { |
| 125 | .recv = tpm_atml_recv, |
| 126 | .send = tpm_atml_send, |
| 127 | .cancel = tpm_atml_cancel, |
| 128 | .req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL, |
| 129 | .req_complete_val = ATML_STATUS_DATA_AVAIL, |
| 130 | .base = TPM_ATML_BASE, |
| 131 | .miscdev = { .fops = &atmel_ops, }, |
| 132 | }; |
| 133 | |
| 134 | static int __devinit tpm_atml_init(struct pci_dev *pci_dev, |
| 135 | const struct pci_device_id *pci_id) |
| 136 | { |
| 137 | u8 version[4]; |
| 138 | int rc = 0; |
| 139 | |
| 140 | if (pci_enable_device(pci_dev)) |
| 141 | return -EIO; |
| 142 | |
| 143 | if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) { |
| 144 | rc = -ENODEV; |
| 145 | goto out_err; |
| 146 | } |
| 147 | |
| 148 | /* verify that it is an Atmel part */ |
| 149 | if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T' |
| 150 | || tpm_read_index(6) != 'M' || tpm_read_index(7) != 'L') { |
| 151 | rc = -ENODEV; |
| 152 | goto out_err; |
| 153 | } |
| 154 | |
| 155 | /* query chip for its version number */ |
| 156 | if ((version[0] = tpm_read_index(0x00)) != 0xFF) { |
| 157 | version[1] = tpm_read_index(0x01); |
| 158 | version[2] = tpm_read_index(0x02); |
| 159 | version[3] = tpm_read_index(0x03); |
| 160 | } else { |
| 161 | dev_info(&pci_dev->dev, "version query failed\n"); |
| 162 | rc = -ENODEV; |
| 163 | goto out_err; |
| 164 | } |
| 165 | |
| 166 | if ((rc = tpm_register_hardware(pci_dev, &tpm_atmel)) < 0) |
| 167 | goto out_err; |
| 168 | |
| 169 | dev_info(&pci_dev->dev, |
| 170 | "Atmel TPM version %d.%d.%d.%d\n", version[0], version[1], |
| 171 | version[2], version[3]); |
| 172 | |
| 173 | return 0; |
| 174 | out_err: |
| 175 | pci_disable_device(pci_dev); |
| 176 | return rc; |
| 177 | } |
| 178 | |
| 179 | static struct pci_device_id tpm_pci_tbl[] __devinitdata = { |
| 180 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)}, |
| 181 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)}, |
| 182 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)}, |
| 183 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)}, |
| 184 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)}, |
| 185 | {PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)}, |
| 186 | {0,} |
| 187 | }; |
| 188 | |
| 189 | MODULE_DEVICE_TABLE(pci, tpm_pci_tbl); |
| 190 | |
| 191 | static struct pci_driver atmel_pci_driver = { |
| 192 | .name = "tpm_atmel", |
| 193 | .id_table = tpm_pci_tbl, |
| 194 | .probe = tpm_atml_init, |
| 195 | .remove = __devexit_p(tpm_remove), |
| 196 | .suspend = tpm_pm_suspend, |
| 197 | .resume = tpm_pm_resume, |
| 198 | }; |
| 199 | |
| 200 | static int __init init_atmel(void) |
| 201 | { |
| 202 | return pci_register_driver(&atmel_pci_driver); |
| 203 | } |
| 204 | |
| 205 | static void __exit cleanup_atmel(void) |
| 206 | { |
| 207 | pci_unregister_driver(&atmel_pci_driver); |
| 208 | } |
| 209 | |
| 210 | module_init(init_atmel); |
| 211 | module_exit(cleanup_atmel); |
| 212 | |
| 213 | MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); |
| 214 | MODULE_DESCRIPTION("TPM Driver"); |
| 215 | MODULE_VERSION("2.0"); |
| 216 | MODULE_LICENSE("GPL"); |