Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright 2003 PMC-Sierra |
| 3 | * Author: Manish Lachwani (lachwani@pmc-sierra.com) |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify it |
| 6 | * under the terms of the GNU General Public License as published by the |
| 7 | * Free Software Foundation; either version 2 of the License, or (at your |
| 8 | * option) any later version. |
| 9 | * |
| 10 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 11 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 12 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 13 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 14 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 15 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 16 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 17 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 18 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 19 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 20 | * |
| 21 | * You should have received a copy of the GNU General Public License along |
| 22 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 23 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 24 | */ |
| 25 | |
| 26 | #include <linux/config.h> |
| 27 | #include <linux/types.h> |
| 28 | #include <linux/pci.h> |
| 29 | #include <linux/kernel.h> |
| 30 | #include <linux/slab.h> |
| 31 | #include <linux/version.h> |
| 32 | #include <asm/pci.h> |
| 33 | #include <asm/io.h> |
| 34 | |
| 35 | #include <linux/init.h> |
| 36 | #include <asm/titan_dep.h> |
| 37 | |
| 38 | #ifdef CONFIG_HYPERTRANSPORT |
| 39 | |
| 40 | |
| 41 | /* |
| 42 | * This function check if the Hypertransport Link Initialization completed. If |
| 43 | * it did, then proceed further with scanning bus #2 |
| 44 | */ |
| 45 | static __inline__ int check_titan_htlink(void) |
| 46 | { |
| 47 | u32 val; |
| 48 | |
| 49 | val = *(volatile uint32_t *)(RM9000x2_HTLINK_REG); |
| 50 | if (val & 0x00000020) |
| 51 | /* HT Link Initialization completed */ |
| 52 | return 1; |
| 53 | else |
| 54 | return 0; |
| 55 | } |
| 56 | |
| 57 | static int titan_ht_config_read_dword(struct pci_dev *device, |
| 58 | int offset, u32* val) |
| 59 | { |
| 60 | int dev, bus, func; |
| 61 | uint32_t address_reg, data_reg; |
| 62 | uint32_t address; |
| 63 | |
| 64 | bus = device->bus->number; |
| 65 | dev = PCI_SLOT(device->devfn); |
| 66 | func = PCI_FUNC(device->devfn); |
| 67 | |
| 68 | /* XXX Need to change the Bus # */ |
| 69 | if (bus > 2) |
| 70 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 71 | 0x80000000 | 0x1; |
| 72 | else |
| 73 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 74 | |
| 75 | address_reg = RM9000x2_OCD_HTCFGA; |
| 76 | data_reg = RM9000x2_OCD_HTCFGD; |
| 77 | |
| 78 | RM9K_WRITE(address_reg, address); |
| 79 | RM9K_READ(data_reg, val); |
| 80 | |
| 81 | return PCIBIOS_SUCCESSFUL; |
| 82 | } |
| 83 | |
| 84 | |
| 85 | static int titan_ht_config_read_word(struct pci_dev *device, |
| 86 | int offset, u16* val) |
| 87 | { |
| 88 | int dev, bus, func; |
| 89 | uint32_t address_reg, data_reg; |
| 90 | uint32_t address; |
| 91 | |
| 92 | bus = device->bus->number; |
| 93 | dev = PCI_SLOT(device->devfn); |
| 94 | func = PCI_FUNC(device->devfn); |
| 95 | |
| 96 | /* XXX Need to change the Bus # */ |
| 97 | if (bus > 2) |
| 98 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 99 | 0x80000000 | 0x1; |
| 100 | else |
| 101 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 102 | |
| 103 | address_reg = RM9000x2_OCD_HTCFGA; |
| 104 | data_reg = RM9000x2_OCD_HTCFGD; |
| 105 | |
| 106 | if ((offset & 0x3) == 0) |
| 107 | offset = 0x2; |
| 108 | else |
| 109 | offset = 0x0; |
| 110 | |
| 111 | RM9K_WRITE(address_reg, address); |
| 112 | RM9K_READ_16(data_reg + offset, val); |
| 113 | |
| 114 | return PCIBIOS_SUCCESSFUL; |
| 115 | } |
| 116 | |
| 117 | |
| 118 | u32 longswap(unsigned long l) |
| 119 | { |
| 120 | unsigned char b1,b2,b3,b4; |
| 121 | |
| 122 | b1 = l&255; |
| 123 | b2 = (l>>8)&255; |
| 124 | b3 = (l>>16)&255; |
| 125 | b4 = (l>>24)&255; |
| 126 | |
| 127 | return ((b1<<24) + (b2<<16) + (b3<<8) + b4); |
| 128 | } |
| 129 | |
| 130 | |
| 131 | static int titan_ht_config_read_byte(struct pci_dev *device, |
| 132 | int offset, u8* val) |
| 133 | { |
| 134 | int dev, bus, func; |
| 135 | uint32_t address_reg, data_reg; |
| 136 | uint32_t address; |
| 137 | int offset1; |
| 138 | |
| 139 | bus = device->bus->number; |
| 140 | dev = PCI_SLOT(device->devfn); |
| 141 | func = PCI_FUNC(device->devfn); |
| 142 | |
| 143 | /* XXX Need to change the Bus # */ |
| 144 | if (bus > 2) |
| 145 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 146 | 0x80000000 | 0x1; |
| 147 | else |
| 148 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 149 | |
| 150 | address_reg = RM9000x2_OCD_HTCFGA; |
| 151 | data_reg = RM9000x2_OCD_HTCFGD; |
| 152 | |
| 153 | RM9K_WRITE(address_reg, address); |
| 154 | |
| 155 | if ((offset & 0x3) == 0) { |
| 156 | offset1 = 0x3; |
| 157 | } |
| 158 | if ((offset & 0x3) == 1) { |
| 159 | offset1 = 0x2; |
| 160 | } |
| 161 | if ((offset & 0x3) == 2) { |
| 162 | offset1 = 0x1; |
| 163 | } |
| 164 | if ((offset & 0x3) == 3) { |
| 165 | offset1 = 0x0; |
| 166 | } |
| 167 | RM9K_READ_8(data_reg + offset1, val); |
| 168 | |
| 169 | return PCIBIOS_SUCCESSFUL; |
| 170 | } |
| 171 | |
| 172 | |
| 173 | static int titan_ht_config_write_dword(struct pci_dev *device, |
| 174 | int offset, u8 val) |
| 175 | { |
| 176 | int dev, bus, func; |
| 177 | uint32_t address_reg, data_reg; |
| 178 | uint32_t address; |
| 179 | |
| 180 | bus = device->bus->number; |
| 181 | dev = PCI_SLOT(device->devfn); |
| 182 | func = PCI_FUNC(device->devfn); |
| 183 | |
| 184 | /* XXX Need to change the Bus # */ |
| 185 | if (bus > 2) |
| 186 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 187 | 0x80000000 | 0x1; |
| 188 | else |
| 189 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 190 | |
| 191 | address_reg = RM9000x2_OCD_HTCFGA; |
| 192 | data_reg = RM9000x2_OCD_HTCFGD; |
| 193 | |
| 194 | RM9K_WRITE(address_reg, address); |
| 195 | RM9K_WRITE(data_reg, val); |
| 196 | |
| 197 | return PCIBIOS_SUCCESSFUL; |
| 198 | } |
| 199 | |
| 200 | static int titan_ht_config_write_word(struct pci_dev *device, |
| 201 | int offset, u8 val) |
| 202 | { |
| 203 | int dev, bus, func; |
| 204 | uint32_t address_reg, data_reg; |
| 205 | uint32_t address; |
| 206 | |
| 207 | bus = device->bus->number; |
| 208 | dev = PCI_SLOT(device->devfn); |
| 209 | func = PCI_FUNC(device->devfn); |
| 210 | |
| 211 | /* XXX Need to change the Bus # */ |
| 212 | if (bus > 2) |
| 213 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 214 | 0x80000000 | 0x1; |
| 215 | else |
| 216 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 217 | |
| 218 | address_reg = RM9000x2_OCD_HTCFGA; |
| 219 | data_reg = RM9000x2_OCD_HTCFGD; |
| 220 | |
| 221 | if ((offset & 0x3) == 0) |
| 222 | offset = 0x2; |
| 223 | else |
| 224 | offset = 0x0; |
| 225 | |
| 226 | RM9K_WRITE(address_reg, address); |
| 227 | RM9K_WRITE_16(data_reg + offset, val); |
| 228 | |
| 229 | return PCIBIOS_SUCCESSFUL; |
| 230 | } |
| 231 | |
| 232 | static int titan_ht_config_write_byte(struct pci_dev *device, |
| 233 | int offset, u8 val) |
| 234 | { |
| 235 | int dev, bus, func; |
| 236 | uint32_t address_reg, data_reg; |
| 237 | uint32_t address; |
| 238 | int offset1; |
| 239 | |
| 240 | bus = device->bus->number; |
| 241 | dev = PCI_SLOT(device->devfn); |
| 242 | func = PCI_FUNC(device->devfn); |
| 243 | |
| 244 | /* XXX Need to change the Bus # */ |
| 245 | if (bus > 2) |
| 246 | address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | |
| 247 | 0x80000000 | 0x1; |
| 248 | else |
| 249 | address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; |
| 250 | |
| 251 | address_reg = RM9000x2_OCD_HTCFGA; |
| 252 | data_reg = RM9000x2_OCD_HTCFGD; |
| 253 | |
| 254 | RM9K_WRITE(address_reg, address); |
| 255 | |
| 256 | if ((offset & 0x3) == 0) { |
| 257 | offset1 = 0x3; |
| 258 | } |
| 259 | if ((offset & 0x3) == 1) { |
| 260 | offset1 = 0x2; |
| 261 | } |
| 262 | if ((offset & 0x3) == 2) { |
| 263 | offset1 = 0x1; |
| 264 | } |
| 265 | if ((offset & 0x3) == 3) { |
| 266 | offset1 = 0x0; |
| 267 | } |
| 268 | |
| 269 | RM9K_WRITE_8(data_reg + offset1, val); |
| 270 | return PCIBIOS_SUCCESSFUL; |
| 271 | } |
| 272 | |
| 273 | |
| 274 | static void titan_pcibios_set_master(struct pci_dev *dev) |
| 275 | { |
| 276 | u16 cmd; |
| 277 | int bus = dev->bus->number; |
| 278 | |
| 279 | if (check_titan_htlink()) |
| 280 | titan_ht_config_read_word(dev, PCI_COMMAND, &cmd); |
| 281 | |
| 282 | cmd |= PCI_COMMAND_MASTER; |
| 283 | |
| 284 | if (check_titan_htlink()) |
| 285 | titan_ht_config_write_word(dev, PCI_COMMAND, cmd); |
| 286 | } |
| 287 | |
| 288 | |
| 289 | int pcibios_enable_resources(struct pci_dev *dev) |
| 290 | { |
| 291 | u16 cmd, old_cmd; |
| 292 | u8 tmp1; |
| 293 | int idx; |
| 294 | struct resource *r; |
| 295 | int bus = dev->bus->number; |
| 296 | |
| 297 | if (check_titan_htlink()) |
| 298 | titan_ht_config_read_word(dev, PCI_COMMAND, &cmd); |
| 299 | |
| 300 | old_cmd = cmd; |
| 301 | for (idx = 0; idx < 6; idx++) { |
| 302 | r = &dev->resource[idx]; |
| 303 | if (!r->start && r->end) { |
| 304 | printk(KERN_ERR |
| 305 | "PCI: Device %s not available because of " |
| 306 | "resource collisions\n", pci_name(dev)); |
| 307 | return -EINVAL; |
| 308 | } |
| 309 | if (r->flags & IORESOURCE_IO) |
| 310 | cmd |= PCI_COMMAND_IO; |
| 311 | if (r->flags & IORESOURCE_MEM) |
| 312 | cmd |= PCI_COMMAND_MEMORY; |
| 313 | } |
| 314 | if (cmd != old_cmd) { |
| 315 | if (check_titan_htlink()) |
| 316 | titan_ht_config_write_word(dev, PCI_COMMAND, cmd); |
| 317 | } |
| 318 | |
| 319 | if (check_titan_htlink()) |
| 320 | titan_ht_config_read_byte(dev, PCI_CACHE_LINE_SIZE, &tmp1); |
| 321 | |
| 322 | if (tmp1 != 8) { |
| 323 | printk(KERN_WARNING "PCI setting cache line size to 8 from " |
| 324 | "%d\n", tmp1); |
| 325 | } |
| 326 | |
| 327 | if (check_titan_htlink()) |
| 328 | titan_ht_config_write_byte(dev, PCI_CACHE_LINE_SIZE, 8); |
| 329 | |
| 330 | if (check_titan_htlink()) |
| 331 | titan_ht_config_read_byte(dev, PCI_LATENCY_TIMER, &tmp1); |
| 332 | |
| 333 | if (tmp1 < 32 || tmp1 == 0xff) { |
| 334 | printk(KERN_WARNING "PCI setting latency timer to 32 from %d\n", |
| 335 | tmp1); |
| 336 | } |
| 337 | |
| 338 | if (check_titan_htlink()) |
| 339 | titan_ht_config_write_byte(dev, PCI_LATENCY_TIMER, 32); |
| 340 | |
| 341 | return 0; |
| 342 | } |
| 343 | |
| 344 | |
| 345 | int pcibios_enable_device(struct pci_dev *dev, int mask) |
| 346 | { |
| 347 | return pcibios_enable_resources(dev); |
| 348 | } |
| 349 | |
| 350 | |
| 351 | |
| 352 | void pcibios_update_resource(struct pci_dev *dev, struct resource *root, |
| 353 | struct resource *res, int resource) |
| 354 | { |
| 355 | u32 new, check; |
| 356 | int reg; |
| 357 | |
| 358 | return; |
| 359 | |
| 360 | new = res->start | (res->flags & PCI_REGION_FLAG_MASK); |
| 361 | if (resource < 6) { |
| 362 | reg = PCI_BASE_ADDRESS_0 + 4 * resource; |
| 363 | } else if (resource == PCI_ROM_RESOURCE) { |
| 364 | res->flags |= IORESOURCE_ROM_ENABLE; |
| 365 | reg = dev->rom_base_reg; |
| 366 | } else { |
| 367 | /* |
| 368 | * Somebody might have asked allocation of a non-standard |
| 369 | * resource |
| 370 | */ |
| 371 | return; |
| 372 | } |
| 373 | |
| 374 | pci_write_config_dword(dev, reg, new); |
| 375 | pci_read_config_dword(dev, reg, &check); |
| 376 | if ((new ^ check) & |
| 377 | ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : |
| 378 | PCI_BASE_ADDRESS_MEM_MASK)) { |
| 379 | printk(KERN_ERR "PCI: Error while updating region " |
| 380 | "%s/%d (%08x != %08x)\n", pci_name(dev), resource, |
| 381 | new, check); |
| 382 | } |
| 383 | } |
| 384 | |
| 385 | |
| 386 | void pcibios_align_resource(void *data, struct resource *res, |
| 387 | unsigned long size, unsigned long align) |
| 388 | { |
| 389 | struct pci_dev *dev = data; |
| 390 | |
| 391 | if (res->flags & IORESOURCE_IO) { |
| 392 | unsigned long start = res->start; |
| 393 | |
| 394 | /* We need to avoid collisions with `mirrored' VGA ports |
| 395 | and other strange ISA hardware, so we always want the |
| 396 | addresses kilobyte aligned. */ |
| 397 | if (size > 0x100) { |
| 398 | printk(KERN_ERR "PCI: I/O Region %s/%d too large" |
| 399 | " (%ld bytes)\n", pci_name(dev), |
| 400 | dev->resource - res, size); |
| 401 | } |
| 402 | |
| 403 | start = (start + 1024 - 1) & ~(1024 - 1); |
| 404 | res->start = start; |
| 405 | } |
| 406 | } |
| 407 | |
| 408 | struct pci_ops titan_pci_ops = { |
| 409 | titan_ht_config_read_byte, |
| 410 | titan_ht_config_read_word, |
| 411 | titan_ht_config_read_dword, |
| 412 | titan_ht_config_write_byte, |
| 413 | titan_ht_config_write_word, |
| 414 | titan_ht_config_write_dword |
| 415 | }; |
| 416 | |
| 417 | void __init pcibios_fixup_bus(struct pci_bus *c) |
| 418 | { |
| 419 | titan_ht_pcibios_fixup_bus(c); |
| 420 | } |
| 421 | |
| 422 | void __init pcibios_init(void) |
| 423 | { |
| 424 | |
| 425 | /* Reset PCI I/O and PCI MEM values */ |
| 426 | /* XXX Need to add the proper values here */ |
| 427 | ioport_resource.start = 0xe0000000; |
| 428 | ioport_resource.end = 0xe0000000 + 0x20000000 - 1; |
| 429 | iomem_resource.start = 0xc0000000; |
| 430 | iomem_resource.end = 0xc0000000 + 0x20000000 - 1; |
| 431 | |
| 432 | /* XXX Need to add bus values */ |
| 433 | pci_scan_bus(2, &titan_pci_ops, NULL); |
| 434 | pci_scan_bus(3, &titan_pci_ops, NULL); |
| 435 | } |
| 436 | |
| 437 | /* |
| 438 | * for parsing "pci=" kernel boot arguments. |
| 439 | */ |
| 440 | char *pcibios_setup(char *str) |
| 441 | { |
| 442 | printk(KERN_INFO "rr: pcibios_setup\n"); |
| 443 | /* Nothing to do for now. */ |
| 444 | |
| 445 | return str; |
| 446 | } |
| 447 | |
| 448 | unsigned __init int pcibios_assign_all_busses(void) |
| 449 | { |
| 450 | /* We want to use the PCI bus detection done by PMON */ |
| 451 | return 0; |
| 452 | } |
| 453 | |
| 454 | #endif /* CONFIG_HYPERTRANSPORT */ |