Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* $Id: niccy.c,v 1.21.2.4 2004/01/13 23:48:39 keil Exp $ |
| 2 | * |
| 3 | * low level stuff for Dr. Neuhaus NICCY PnP and NICCY PCI and |
| 4 | * compatible (SAGEM cybermodem) |
| 5 | * |
| 6 | * Author Karsten Keil |
| 7 | * Copyright by Karsten Keil <keil@isdn4linux.de> |
| 8 | * |
| 9 | * This software may be used and distributed according to the terms |
| 10 | * of the GNU General Public License, incorporated herein by reference. |
| 11 | * |
| 12 | * Thanks to Dr. Neuhaus and SAGEM for information |
| 13 | * |
| 14 | */ |
| 15 | |
| 16 | |
| 17 | #include <linux/config.h> |
| 18 | #include <linux/init.h> |
| 19 | #include "hisax.h" |
| 20 | #include "isac.h" |
| 21 | #include "hscx.h" |
| 22 | #include "isdnl1.h" |
| 23 | #include <linux/pci.h> |
| 24 | #include <linux/isapnp.h> |
| 25 | |
| 26 | extern const char *CardType[]; |
| 27 | const char *niccy_revision = "$Revision: 1.21.2.4 $"; |
| 28 | |
| 29 | #define byteout(addr,val) outb(val,addr) |
| 30 | #define bytein(addr) inb(addr) |
| 31 | |
| 32 | #define ISAC_PCI_DATA 0 |
| 33 | #define HSCX_PCI_DATA 1 |
| 34 | #define ISAC_PCI_ADDR 2 |
| 35 | #define HSCX_PCI_ADDR 3 |
| 36 | #define ISAC_PNP 0 |
| 37 | #define HSCX_PNP 1 |
| 38 | |
| 39 | /* SUB Types */ |
| 40 | #define NICCY_PNP 1 |
| 41 | #define NICCY_PCI 2 |
| 42 | |
| 43 | /* PCI stuff */ |
| 44 | #define PCI_IRQ_CTRL_REG 0x38 |
| 45 | #define PCI_IRQ_ENABLE 0x1f00 |
| 46 | #define PCI_IRQ_DISABLE 0xff0000 |
| 47 | #define PCI_IRQ_ASSERT 0x800000 |
| 48 | |
| 49 | static inline u_char |
| 50 | readreg(unsigned int ale, unsigned int adr, u_char off) |
| 51 | { |
| 52 | register u_char ret; |
| 53 | |
| 54 | byteout(ale, off); |
| 55 | ret = bytein(adr); |
| 56 | return (ret); |
| 57 | } |
| 58 | |
| 59 | static inline void |
| 60 | readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) |
| 61 | { |
| 62 | byteout(ale, off); |
| 63 | insb(adr, data, size); |
| 64 | } |
| 65 | |
| 66 | |
| 67 | static inline void |
| 68 | writereg(unsigned int ale, unsigned int adr, u_char off, u_char data) |
| 69 | { |
| 70 | byteout(ale, off); |
| 71 | byteout(adr, data); |
| 72 | } |
| 73 | |
| 74 | static inline void |
| 75 | writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) |
| 76 | { |
| 77 | byteout(ale, off); |
| 78 | outsb(adr, data, size); |
| 79 | } |
| 80 | |
| 81 | /* Interface functions */ |
| 82 | |
| 83 | static u_char |
| 84 | ReadISAC(struct IsdnCardState *cs, u_char offset) |
| 85 | { |
| 86 | return (readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset)); |
| 87 | } |
| 88 | |
| 89 | static void |
| 90 | WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value) |
| 91 | { |
| 92 | writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset, value); |
| 93 | } |
| 94 | |
| 95 | static void |
| 96 | ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size) |
| 97 | { |
| 98 | readfifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size); |
| 99 | } |
| 100 | |
| 101 | static void |
| 102 | WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size) |
| 103 | { |
| 104 | writefifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size); |
| 105 | } |
| 106 | |
| 107 | static u_char |
| 108 | ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset) |
| 109 | { |
| 110 | return (readreg(cs->hw.niccy.hscx_ale, |
| 111 | cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0))); |
| 112 | } |
| 113 | |
| 114 | static void |
| 115 | WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value) |
| 116 | { |
| 117 | writereg(cs->hw.niccy.hscx_ale, |
| 118 | cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0), value); |
| 119 | } |
| 120 | |
| 121 | #define READHSCX(cs, nr, reg) readreg(cs->hw.niccy.hscx_ale, \ |
| 122 | cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0)) |
| 123 | #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.niccy.hscx_ale, \ |
| 124 | cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0), data) |
| 125 | |
| 126 | #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.niccy.hscx_ale, \ |
| 127 | cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt) |
| 128 | |
| 129 | #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.niccy.hscx_ale, \ |
| 130 | cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt) |
| 131 | |
| 132 | #include "hscx_irq.c" |
| 133 | |
| 134 | static irqreturn_t |
| 135 | niccy_interrupt(int intno, void *dev_id, struct pt_regs *regs) |
| 136 | { |
| 137 | struct IsdnCardState *cs = dev_id; |
| 138 | u_char val; |
| 139 | u_long flags; |
| 140 | |
| 141 | spin_lock_irqsave(&cs->lock, flags); |
| 142 | if (cs->subtyp == NICCY_PCI) { |
| 143 | int ival; |
| 144 | ival = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 145 | if (!(ival & PCI_IRQ_ASSERT)) { /* IRQ not for us (shared) */ |
| 146 | spin_unlock_irqrestore(&cs->lock, flags); |
| 147 | return IRQ_NONE; |
| 148 | } |
| 149 | outl(ival, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 150 | } |
| 151 | val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_ISTA + 0x40); |
| 152 | Start_HSCX: |
| 153 | if (val) |
| 154 | hscx_int_main(cs, val); |
| 155 | val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA); |
| 156 | Start_ISAC: |
| 157 | if (val) |
| 158 | isac_interrupt(cs, val); |
| 159 | val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_ISTA + 0x40); |
| 160 | if (val) { |
| 161 | if (cs->debug & L1_DEB_HSCX) |
| 162 | debugl1(cs, "HSCX IntStat after IntRoutine"); |
| 163 | goto Start_HSCX; |
| 164 | } |
| 165 | val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA); |
| 166 | if (val) { |
| 167 | if (cs->debug & L1_DEB_ISAC) |
| 168 | debugl1(cs, "ISAC IntStat after IntRoutine"); |
| 169 | goto Start_ISAC; |
| 170 | } |
| 171 | writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0xFF); |
| 172 | writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40, 0xFF); |
| 173 | writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0xFF); |
| 174 | writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0); |
| 175 | writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0); |
| 176 | writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40, 0); |
| 177 | spin_unlock_irqrestore(&cs->lock, flags); |
| 178 | return IRQ_HANDLED; |
| 179 | } |
| 180 | |
| 181 | void |
| 182 | release_io_niccy(struct IsdnCardState *cs) |
| 183 | { |
| 184 | if (cs->subtyp == NICCY_PCI) { |
| 185 | int val; |
| 186 | |
| 187 | val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 188 | val &= PCI_IRQ_DISABLE; |
| 189 | outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 190 | release_region(cs->hw.niccy.cfg_reg, 0x40); |
| 191 | release_region(cs->hw.niccy.isac, 4); |
| 192 | } else { |
| 193 | release_region(cs->hw.niccy.isac, 2); |
| 194 | release_region(cs->hw.niccy.isac_ale, 2); |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | static void |
| 199 | niccy_reset(struct IsdnCardState *cs) |
| 200 | { |
| 201 | if (cs->subtyp == NICCY_PCI) { |
| 202 | int val; |
| 203 | |
| 204 | val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 205 | val |= PCI_IRQ_ENABLE; |
| 206 | outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG); |
| 207 | } |
| 208 | inithscxisac(cs, 3); |
| 209 | } |
| 210 | |
| 211 | static int |
| 212 | niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg) |
| 213 | { |
| 214 | u_long flags; |
| 215 | |
| 216 | switch (mt) { |
| 217 | case CARD_RESET: |
| 218 | spin_lock_irqsave(&cs->lock, flags); |
| 219 | niccy_reset(cs); |
| 220 | spin_unlock_irqrestore(&cs->lock, flags); |
| 221 | return(0); |
| 222 | case CARD_RELEASE: |
| 223 | release_io_niccy(cs); |
| 224 | return(0); |
| 225 | case CARD_INIT: |
| 226 | spin_lock_irqsave(&cs->lock, flags); |
| 227 | niccy_reset(cs); |
| 228 | spin_unlock_irqrestore(&cs->lock, flags); |
| 229 | return(0); |
| 230 | case CARD_TEST: |
| 231 | return(0); |
| 232 | } |
| 233 | return(0); |
| 234 | } |
| 235 | |
| 236 | static struct pci_dev *niccy_dev __initdata = NULL; |
| 237 | #ifdef __ISAPNP__ |
| 238 | static struct pnp_card *pnp_c __devinitdata = NULL; |
| 239 | #endif |
| 240 | |
| 241 | int __init |
| 242 | setup_niccy(struct IsdnCard *card) |
| 243 | { |
| 244 | struct IsdnCardState *cs = card->cs; |
| 245 | char tmp[64]; |
| 246 | |
| 247 | strcpy(tmp, niccy_revision); |
| 248 | printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp)); |
| 249 | if (cs->typ != ISDN_CTYPE_NICCY) |
| 250 | return (0); |
| 251 | #ifdef __ISAPNP__ |
| 252 | if (!card->para[1] && isapnp_present()) { |
| 253 | struct pnp_dev *pnp_d = NULL; |
| 254 | int err; |
| 255 | |
| 256 | if ((pnp_c = pnp_find_card( |
| 257 | ISAPNP_VENDOR('S', 'D', 'A'), |
| 258 | ISAPNP_FUNCTION(0x0150), pnp_c))) { |
| 259 | if (!(pnp_d = pnp_find_dev(pnp_c, |
| 260 | ISAPNP_VENDOR('S', 'D', 'A'), |
| 261 | ISAPNP_FUNCTION(0x0150), pnp_d))) { |
| 262 | printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n"); |
| 263 | return (0); |
| 264 | } |
| 265 | pnp_disable_dev(pnp_d); |
| 266 | err = pnp_activate_dev(pnp_d); |
| 267 | if (err<0) { |
| 268 | printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n", |
| 269 | __FUNCTION__, err); |
| 270 | return(0); |
| 271 | } |
| 272 | card->para[1] = pnp_port_start(pnp_d, 0); |
| 273 | card->para[2] = pnp_port_start(pnp_d, 1); |
| 274 | card->para[0] = pnp_irq(pnp_d, 0); |
| 275 | if (!card->para[0] || !card->para[1] || !card->para[2]) { |
| 276 | printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n", |
| 277 | card->para[0], card->para[1], card->para[2]); |
| 278 | pnp_disable_dev(pnp_d); |
| 279 | return(0); |
| 280 | } |
| 281 | } else { |
| 282 | printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n"); |
| 283 | } |
| 284 | } |
| 285 | #endif |
| 286 | if (card->para[1]) { |
| 287 | cs->hw.niccy.isac = card->para[1] + ISAC_PNP; |
| 288 | cs->hw.niccy.hscx = card->para[1] + HSCX_PNP; |
| 289 | cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP; |
| 290 | cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP; |
| 291 | cs->hw.niccy.cfg_reg = 0; |
| 292 | cs->subtyp = NICCY_PNP; |
| 293 | cs->irq = card->para[0]; |
| 294 | if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) { |
| 295 | printk(KERN_WARNING |
| 296 | "HiSax: %s data port %x-%x already in use\n", |
| 297 | CardType[card->typ], |
| 298 | cs->hw.niccy.isac, |
| 299 | cs->hw.niccy.isac + 1); |
| 300 | return (0); |
| 301 | } |
| 302 | if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) { |
| 303 | printk(KERN_WARNING |
| 304 | "HiSax: %s address port %x-%x already in use\n", |
| 305 | CardType[card->typ], |
| 306 | cs->hw.niccy.isac_ale, |
| 307 | cs->hw.niccy.isac_ale + 1); |
| 308 | release_region(cs->hw.niccy.isac, 2); |
| 309 | return (0); |
| 310 | } |
| 311 | } else { |
| 312 | #ifdef CONFIG_PCI |
| 313 | u_int pci_ioaddr; |
| 314 | cs->subtyp = 0; |
| 315 | if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM, |
| 316 | PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) { |
| 317 | if (pci_enable_device(niccy_dev)) |
| 318 | return(0); |
| 319 | /* get IRQ */ |
| 320 | if (!niccy_dev->irq) { |
| 321 | printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n"); |
| 322 | return(0); |
| 323 | } |
| 324 | cs->irq = niccy_dev->irq; |
| 325 | cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0); |
| 326 | if (!cs->hw.niccy.cfg_reg) { |
| 327 | printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n"); |
| 328 | return(0); |
| 329 | } |
| 330 | pci_ioaddr = pci_resource_start(niccy_dev, 1); |
| 331 | if (!pci_ioaddr) { |
| 332 | printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n"); |
| 333 | return(0); |
| 334 | } |
| 335 | cs->subtyp = NICCY_PCI; |
| 336 | } else { |
| 337 | printk(KERN_WARNING "Niccy: No PCI card found\n"); |
| 338 | return(0); |
| 339 | } |
| 340 | cs->irq_flags |= SA_SHIRQ; |
| 341 | cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA; |
| 342 | cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR; |
| 343 | cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA; |
| 344 | cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR; |
| 345 | if (!request_region(cs->hw.niccy.isac, 4, "niccy")) { |
| 346 | printk(KERN_WARNING |
| 347 | "HiSax: %s data port %x-%x already in use\n", |
| 348 | CardType[card->typ], |
| 349 | cs->hw.niccy.isac, |
| 350 | cs->hw.niccy.isac + 4); |
| 351 | return (0); |
| 352 | } |
| 353 | if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) { |
| 354 | printk(KERN_WARNING |
| 355 | "HiSax: %s pci port %x-%x already in use\n", |
| 356 | CardType[card->typ], |
| 357 | cs->hw.niccy.cfg_reg, |
| 358 | cs->hw.niccy.cfg_reg + 0x40); |
| 359 | release_region(cs->hw.niccy.isac, 4); |
| 360 | return (0); |
| 361 | } |
| 362 | #else |
| 363 | printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n"); |
| 364 | printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n"); |
| 365 | return (0); |
| 366 | #endif /* CONFIG_PCI */ |
| 367 | } |
| 368 | printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n", |
| 369 | CardType[cs->typ], (cs->subtyp==1) ? "PnP":"PCI", |
| 370 | cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale); |
| 371 | setup_isac(cs); |
| 372 | cs->readisac = &ReadISAC; |
| 373 | cs->writeisac = &WriteISAC; |
| 374 | cs->readisacfifo = &ReadISACfifo; |
| 375 | cs->writeisacfifo = &WriteISACfifo; |
| 376 | cs->BC_Read_Reg = &ReadHSCX; |
| 377 | cs->BC_Write_Reg = &WriteHSCX; |
| 378 | cs->BC_Send_Data = &hscx_fill_fifo; |
| 379 | cs->cardmsg = &niccy_card_msg; |
| 380 | cs->irq_func = &niccy_interrupt; |
| 381 | ISACVersion(cs, "Niccy:"); |
| 382 | if (HscxVersion(cs, "Niccy:")) { |
| 383 | printk(KERN_WARNING |
| 384 | "Niccy: wrong HSCX versions check IO address\n"); |
| 385 | release_io_niccy(cs); |
| 386 | return (0); |
| 387 | } |
| 388 | return (1); |
| 389 | } |