Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | #ifndef _FTAPE_CTL_H |
| 2 | #define _FTAPE_CTL_H |
| 3 | |
| 4 | /* |
| 5 | * Copyright (C) 1993-1996 Bas Laarhoven, |
| 6 | * (C) 1996-1997 Claus-Justus Heine. |
| 7 | |
| 8 | This program is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; either version 2, or (at your option) |
| 11 | any later version. |
| 12 | |
| 13 | This program is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with this program; see the file COPYING. If not, write to |
| 20 | the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | |
| 22 | * |
| 23 | * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.h,v $ |
| 24 | * $Revision: 1.2 $ |
| 25 | * $Date: 1997/10/05 19:18:09 $ |
| 26 | * |
| 27 | * This file contains the non-standard IOCTL related definitions |
| 28 | * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for |
| 29 | * Linux. |
| 30 | */ |
| 31 | |
| 32 | #include <linux/ioctl.h> |
| 33 | #include <linux/mtio.h> |
| 34 | #include <linux/ftape-vendors.h> |
| 35 | |
| 36 | #include "../lowlevel/ftape-rw.h" |
| 37 | #include <linux/ftape-header-segment.h> |
| 38 | |
| 39 | typedef struct { |
| 40 | int used; /* any reading or writing done */ |
| 41 | /* isr statistics */ |
| 42 | unsigned int id_am_errors; /* id address mark not found */ |
| 43 | unsigned int id_crc_errors; /* crc error in id address mark */ |
| 44 | unsigned int data_am_errors; /* data address mark not found */ |
| 45 | unsigned int data_crc_errors; /* crc error in data field */ |
| 46 | unsigned int overrun_errors; /* fdc access timing problem */ |
| 47 | unsigned int no_data_errors; /* sector not found */ |
| 48 | unsigned int retries; /* number of tape retries */ |
| 49 | /* ecc statistics */ |
| 50 | unsigned int crc_errors; /* crc error in data */ |
| 51 | unsigned int crc_failures; /* bad data without crc error */ |
| 52 | unsigned int ecc_failures; /* failed to correct */ |
| 53 | unsigned int corrected; /* total sectors corrected */ |
| 54 | /* general statistics */ |
| 55 | unsigned int rewinds; /* number of tape rewinds */ |
| 56 | unsigned int defects; /* bad sectors due to media defects */ |
| 57 | } history_record; |
| 58 | |
| 59 | /* this structure contains * ALL * information that we want |
| 60 | * our child modules to know about, but don't want them to |
| 61 | * modify. |
| 62 | */ |
| 63 | typedef struct { |
| 64 | /* vendor information */ |
| 65 | vendor_struct fti_drive_type; |
| 66 | /* data rates */ |
| 67 | unsigned int fti_used_data_rate; |
| 68 | unsigned int fti_drive_max_rate; |
| 69 | unsigned int fti_fdc_max_rate; |
| 70 | /* drive selection, either FTAPE_SEL_A/B/C/D */ |
| 71 | int fti_drive_sel; |
| 72 | /* flags set after decode the drive and tape status */ |
| 73 | unsigned int fti_formatted :1; |
| 74 | unsigned int fti_no_tape :1; |
| 75 | unsigned int fti_write_protected:1; |
| 76 | unsigned int fti_new_tape :1; |
| 77 | /* values of last queried drive/tape status and error */ |
| 78 | ft_drive_error fti_last_error; |
| 79 | ft_drive_status fti_last_status; |
| 80 | /* cartridge geometry */ |
| 81 | unsigned int fti_tracks_per_tape; |
| 82 | unsigned int fti_segments_per_track; |
| 83 | /* location of header segments, etc. */ |
| 84 | int fti_used_header_segment; |
| 85 | int fti_header_segment_1; |
| 86 | int fti_header_segment_2; |
| 87 | int fti_first_data_segment; |
| 88 | int fti_last_data_segment; |
| 89 | /* the format code as stored in the header segment */ |
| 90 | ft_format_type fti_format_code; |
| 91 | /* the following is the sole reason for the ftape_set_status() call */ |
| 92 | unsigned int fti_qic_std; |
| 93 | /* is tape running? */ |
| 94 | volatile enum runner_status_enum fti_runner_status; |
| 95 | /* is tape reading/writing/verifying/formatting/deleting */ |
| 96 | buffer_state_enum fti_state; |
| 97 | /* flags fatal hardware error */ |
| 98 | unsigned int fti_failure:1; |
| 99 | /* history record */ |
| 100 | history_record fti_history; |
| 101 | } ftape_info; |
| 102 | |
| 103 | /* vendor information */ |
| 104 | #define ft_drive_type ftape_status.fti_drive_type |
| 105 | /* data rates */ |
| 106 | #define ft_data_rate ftape_status.fti_used_data_rate |
| 107 | #define ft_drive_max_rate ftape_status.fti_drive_max_rate |
| 108 | #define ft_fdc_max_rate ftape_status.fti_fdc_max_rate |
| 109 | /* drive selection, either FTAPE_SEL_A/B/C/D */ |
| 110 | #define ft_drive_sel ftape_status.fti_drive_sel |
| 111 | /* flags set after decode the drive and tape status */ |
| 112 | #define ft_formatted ftape_status.fti_formatted |
| 113 | #define ft_no_tape ftape_status.fti_no_tape |
| 114 | #define ft_write_protected ftape_status.fti_write_protected |
| 115 | #define ft_new_tape ftape_status.fti_new_tape |
| 116 | /* values of last queried drive/tape status and error */ |
| 117 | #define ft_last_error ftape_status.fti_last_error |
| 118 | #define ft_last_status ftape_status.fti_last_status |
| 119 | /* cartridge geometry */ |
| 120 | #define ft_tracks_per_tape ftape_status.fti_tracks_per_tape |
| 121 | #define ft_segments_per_track ftape_status.fti_segments_per_track |
| 122 | /* the format code as stored in the header segment */ |
| 123 | #define ft_format_code ftape_status.fti_format_code |
| 124 | /* the qic status as returned by report drive configuration */ |
| 125 | #define ft_qic_std ftape_status.fti_qic_std |
| 126 | #define ft_used_header_segment ftape_status.fti_used_header_segment |
| 127 | #define ft_header_segment_1 ftape_status.fti_header_segment_1 |
| 128 | #define ft_header_segment_2 ftape_status.fti_header_segment_2 |
| 129 | #define ft_first_data_segment ftape_status.fti_first_data_segment |
| 130 | #define ft_last_data_segment ftape_status.fti_last_data_segment |
| 131 | /* is tape running? */ |
| 132 | #define ft_runner_status ftape_status.fti_runner_status |
| 133 | /* is tape reading/writing/verifying/formatting/deleting */ |
| 134 | #define ft_driver_state ftape_status.fti_state |
| 135 | /* flags fatal hardware error */ |
| 136 | #define ft_failure ftape_status.fti_failure |
| 137 | /* history record */ |
| 138 | #define ft_history ftape_status.fti_history |
| 139 | |
| 140 | /* |
| 141 | * ftape-ctl.c defined global vars. |
| 142 | */ |
| 143 | extern ftape_info ftape_status; |
| 144 | extern int ftape_segments_per_head; |
| 145 | extern int ftape_segments_per_cylinder; |
| 146 | extern int ftape_init_drive_needed; |
| 147 | |
| 148 | /* |
| 149 | * ftape-ctl.c defined global functions. |
| 150 | */ |
| 151 | extern int ftape_mmap(struct vm_area_struct *vma); |
| 152 | extern int ftape_enable(int drive_selection); |
| 153 | extern void ftape_disable(void); |
| 154 | extern int ftape_seek_to_bot(void); |
| 155 | extern int ftape_seek_to_eot(void); |
| 156 | extern int ftape_abort_operation(void); |
| 157 | extern void ftape_calc_timeouts(unsigned int qic_std, |
| 158 | unsigned int data_rate, |
| 159 | unsigned int tape_len); |
| 160 | extern int ftape_calibrate_data_rate(unsigned int qic_std); |
| 161 | extern const ftape_info *ftape_get_status(void); |
| 162 | #endif |