Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * MixCom Watchdog: A Simple Hardware Watchdog Device |
| 3 | * Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis |
| 4 | * |
| 5 | * Author: Gergely Madarasz <gorgo@itc.hu> |
| 6 | * |
| 7 | * Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License |
| 11 | * as published by the Free Software Foundation; either version |
| 12 | * 2 of the License, or (at your option) any later version. |
| 13 | * |
| 14 | * Version 0.1 (99/04/15): |
| 15 | * - first version |
| 16 | * |
| 17 | * Version 0.2 (99/06/16): |
| 18 | * - added kernel timer watchdog ping after close |
| 19 | * since the hardware does not support watchdog shutdown |
| 20 | * |
| 21 | * Version 0.3 (99/06/21): |
| 22 | * - added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls |
| 23 | * |
| 24 | * Version 0.3.1 (99/06/22): |
| 25 | * - allow module removal while internal timer is active, |
| 26 | * print warning about probable reset |
| 27 | * |
| 28 | * Version 0.4 (99/11/15): |
| 29 | * - support for one more type board |
| 30 | * |
| 31 | * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com> |
| 32 | * - added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT |
| 33 | * |
| 34 | */ |
| 35 | |
| 36 | #define VERSION "0.5" |
| 37 | |
| 38 | #include <linux/module.h> |
| 39 | #include <linux/moduleparam.h> |
| 40 | #include <linux/config.h> |
| 41 | #include <linux/types.h> |
| 42 | #include <linux/miscdevice.h> |
| 43 | #include <linux/ioport.h> |
| 44 | #include <linux/watchdog.h> |
| 45 | #include <linux/fs.h> |
| 46 | #include <linux/reboot.h> |
| 47 | #include <linux/init.h> |
| 48 | #include <asm/uaccess.h> |
| 49 | #include <asm/io.h> |
| 50 | |
| 51 | static int mixcomwd_ioports[] = { 0x180, 0x280, 0x380, 0x000 }; |
| 52 | |
| 53 | #define MIXCOM_WATCHDOG_OFFSET 0xc10 |
| 54 | #define MIXCOM_ID 0x11 |
| 55 | #define FLASHCOM_WATCHDOG_OFFSET 0x4 |
| 56 | #define FLASHCOM_ID 0x18 |
| 57 | |
| 58 | static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ |
| 59 | |
| 60 | static int watchdog_port; |
| 61 | static int mixcomwd_timer_alive; |
| 62 | static struct timer_list mixcomwd_timer = TIMER_INITIALIZER(NULL, 0, 0); |
| 63 | static char expect_close; |
| 64 | |
| 65 | #ifdef CONFIG_WATCHDOG_NOWAYOUT |
| 66 | static int nowayout = 1; |
| 67 | #else |
| 68 | static int nowayout = 0; |
| 69 | #endif |
| 70 | |
| 71 | module_param(nowayout, int, 0); |
| 72 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| 73 | |
| 74 | static void mixcomwd_ping(void) |
| 75 | { |
| 76 | outb_p(55,watchdog_port); |
| 77 | return; |
| 78 | } |
| 79 | |
| 80 | static void mixcomwd_timerfun(unsigned long d) |
| 81 | { |
| 82 | mixcomwd_ping(); |
| 83 | |
| 84 | mod_timer(&mixcomwd_timer,jiffies+ 5*HZ); |
| 85 | } |
| 86 | |
| 87 | /* |
| 88 | * Allow only one person to hold it open |
| 89 | */ |
| 90 | |
| 91 | static int mixcomwd_open(struct inode *inode, struct file *file) |
| 92 | { |
| 93 | if(test_and_set_bit(0,&mixcomwd_opened)) { |
| 94 | return -EBUSY; |
| 95 | } |
| 96 | mixcomwd_ping(); |
| 97 | |
| 98 | if (nowayout) { |
| 99 | /* |
| 100 | * fops_get() code via open() has already done |
| 101 | * a try_module_get() so it is safe to do the |
| 102 | * __module_get(). |
| 103 | */ |
| 104 | __module_get(THIS_MODULE); |
| 105 | } else { |
| 106 | if(mixcomwd_timer_alive) { |
| 107 | del_timer(&mixcomwd_timer); |
| 108 | mixcomwd_timer_alive=0; |
| 109 | } |
| 110 | } |
| 111 | return nonseekable_open(inode, file); |
| 112 | } |
| 113 | |
| 114 | static int mixcomwd_release(struct inode *inode, struct file *file) |
| 115 | { |
| 116 | if (expect_close == 42) { |
| 117 | if(mixcomwd_timer_alive) { |
| 118 | printk(KERN_ERR "mixcomwd: release called while internal timer alive"); |
| 119 | return -EBUSY; |
| 120 | } |
| 121 | init_timer(&mixcomwd_timer); |
| 122 | mixcomwd_timer.expires=jiffies + 5 * HZ; |
| 123 | mixcomwd_timer.function=mixcomwd_timerfun; |
| 124 | mixcomwd_timer.data=0; |
| 125 | mixcomwd_timer_alive=1; |
| 126 | add_timer(&mixcomwd_timer); |
| 127 | } else { |
| 128 | printk(KERN_CRIT "mixcomwd: WDT device closed unexpectedly. WDT will not stop!\n"); |
| 129 | } |
| 130 | |
| 131 | clear_bit(0,&mixcomwd_opened); |
| 132 | expect_close=0; |
| 133 | return 0; |
| 134 | } |
| 135 | |
| 136 | |
| 137 | static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) |
| 138 | { |
| 139 | if(len) |
| 140 | { |
| 141 | if (!nowayout) { |
| 142 | size_t i; |
| 143 | |
| 144 | /* In case it was set long ago */ |
| 145 | expect_close = 0; |
| 146 | |
| 147 | for (i = 0; i != len; i++) { |
| 148 | char c; |
| 149 | if (get_user(c, data + i)) |
| 150 | return -EFAULT; |
| 151 | if (c == 'V') |
| 152 | expect_close = 42; |
| 153 | } |
| 154 | } |
| 155 | mixcomwd_ping(); |
| 156 | } |
| 157 | return len; |
| 158 | } |
| 159 | |
| 160 | static int mixcomwd_ioctl(struct inode *inode, struct file *file, |
| 161 | unsigned int cmd, unsigned long arg) |
| 162 | { |
| 163 | void __user *argp = (void __user *)arg; |
| 164 | int __user *p = argp; |
| 165 | int status; |
| 166 | static struct watchdog_info ident = { |
| 167 | .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| 168 | .firmware_version = 1, |
| 169 | .identity = "MixCOM watchdog", |
| 170 | }; |
| 171 | |
| 172 | switch(cmd) |
| 173 | { |
| 174 | case WDIOC_GETSTATUS: |
| 175 | status=mixcomwd_opened; |
| 176 | if (!nowayout) { |
| 177 | status|=mixcomwd_timer_alive; |
| 178 | } |
| 179 | if (copy_to_user(p, &status, sizeof(int))) { |
| 180 | return -EFAULT; |
| 181 | } |
| 182 | break; |
| 183 | case WDIOC_GETSUPPORT: |
| 184 | if (copy_to_user(argp, &ident, sizeof(ident))) { |
| 185 | return -EFAULT; |
| 186 | } |
| 187 | break; |
| 188 | case WDIOC_KEEPALIVE: |
| 189 | mixcomwd_ping(); |
| 190 | break; |
| 191 | default: |
| 192 | return -ENOIOCTLCMD; |
| 193 | } |
| 194 | return 0; |
| 195 | } |
| 196 | |
| 197 | static struct file_operations mixcomwd_fops= |
| 198 | { |
| 199 | .owner = THIS_MODULE, |
| 200 | .llseek = no_llseek, |
| 201 | .write = mixcomwd_write, |
| 202 | .ioctl = mixcomwd_ioctl, |
| 203 | .open = mixcomwd_open, |
| 204 | .release = mixcomwd_release, |
| 205 | }; |
| 206 | |
| 207 | static struct miscdevice mixcomwd_miscdev= |
| 208 | { |
| 209 | .minor = WATCHDOG_MINOR, |
| 210 | .name = "watchdog", |
| 211 | .fops = &mixcomwd_fops, |
| 212 | }; |
| 213 | |
| 214 | static int __init mixcomwd_checkcard(int port) |
| 215 | { |
| 216 | int id; |
| 217 | |
| 218 | port += MIXCOM_WATCHDOG_OFFSET; |
| 219 | if (!request_region(port, 1, "MixCOM watchdog")) { |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | id=inb_p(port) & 0x3f; |
| 224 | if(id!=MIXCOM_ID) { |
| 225 | release_region(port, 1); |
| 226 | return 0; |
| 227 | } |
| 228 | return port; |
| 229 | } |
| 230 | |
| 231 | static int __init flashcom_checkcard(int port) |
| 232 | { |
| 233 | int id; |
| 234 | |
| 235 | port += FLASHCOM_WATCHDOG_OFFSET; |
| 236 | if (!request_region(port, 1, "MixCOM watchdog")) { |
| 237 | return 0; |
| 238 | } |
| 239 | |
| 240 | id=inb_p(port); |
| 241 | if(id!=FLASHCOM_ID) { |
| 242 | release_region(port, 1); |
| 243 | return 0; |
| 244 | } |
| 245 | return port; |
| 246 | } |
| 247 | |
| 248 | static int __init mixcomwd_init(void) |
| 249 | { |
| 250 | int i; |
| 251 | int ret; |
| 252 | int found=0; |
| 253 | |
| 254 | for (i = 0; !found && mixcomwd_ioports[i] != 0; i++) { |
| 255 | watchdog_port = mixcomwd_checkcard(mixcomwd_ioports[i]); |
| 256 | if (watchdog_port) { |
| 257 | found = 1; |
| 258 | } |
| 259 | } |
| 260 | |
| 261 | /* The FlashCOM card can be set up at 0x300 -> 0x378, in 0x8 jumps */ |
| 262 | for (i = 0x300; !found && i < 0x380; i+=0x8) { |
| 263 | watchdog_port = flashcom_checkcard(i); |
| 264 | if (watchdog_port) { |
| 265 | found = 1; |
| 266 | } |
| 267 | } |
| 268 | |
| 269 | if (!found) { |
| 270 | printk("mixcomwd: No card detected, or port not available.\n"); |
| 271 | return -ENODEV; |
| 272 | } |
| 273 | |
| 274 | ret = misc_register(&mixcomwd_miscdev); |
| 275 | if (ret) |
| 276 | { |
| 277 | release_region(watchdog_port, 1); |
| 278 | return ret; |
| 279 | } |
| 280 | |
| 281 | printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",VERSION,watchdog_port); |
| 282 | |
| 283 | return 0; |
| 284 | } |
| 285 | |
| 286 | static void __exit mixcomwd_exit(void) |
| 287 | { |
| 288 | if (!nowayout) { |
| 289 | if(mixcomwd_timer_alive) { |
| 290 | printk(KERN_WARNING "mixcomwd: I quit now, hardware will" |
| 291 | " probably reboot!\n"); |
| 292 | del_timer(&mixcomwd_timer); |
| 293 | mixcomwd_timer_alive=0; |
| 294 | } |
| 295 | } |
| 296 | release_region(watchdog_port,1); |
| 297 | misc_deregister(&mixcomwd_miscdev); |
| 298 | } |
| 299 | |
| 300 | module_init(mixcomwd_init); |
| 301 | module_exit(mixcomwd_exit); |
| 302 | |
| 303 | MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>"); |
| 304 | MODULE_DESCRIPTION("MixCom Watchdog driver"); |
| 305 | MODULE_LICENSE("GPL"); |
| 306 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |