Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/message/fusion/mptioctl.h |
| 3 | * Fusion MPT misc device (ioctl) driver. |
| 4 | * For use with PCI chip/adapter(s): |
| 5 | * LSIFC9xx/LSI409xx Fibre Channel |
| 6 | * running LSI Logic Fusion MPT (Message Passing Technology) firmware. |
| 7 | * |
| 8 | * Credits: |
| 9 | * This driver would not exist if not for Alan Cox's development |
| 10 | * of the linux i2o driver. |
| 11 | * |
| 12 | * A huge debt of gratitude is owed to David S. Miller (DaveM) |
| 13 | * for fixing much of the stupid and broken stuff in the early |
| 14 | * driver while porting to sparc64 platform. THANK YOU! |
| 15 | * |
| 16 | * (see also mptbase.c) |
| 17 | * |
| 18 | * Copyright (c) 1999-2004 LSI Logic Corporation |
| 19 | * Originally By: Steven J. Ralston |
| 20 | * (mailto:sjralston1@netscape.net) |
| 21 | * (mailto:mpt_linux_developer@lsil.com) |
| 22 | * |
| 23 | * $Id: mptctl.h,v 1.13 2002/12/03 21:26:33 pdelaney Exp $ |
| 24 | */ |
| 25 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 26 | /* |
| 27 | This program is free software; you can redistribute it and/or modify |
| 28 | it under the terms of the GNU General Public License as published by |
| 29 | the Free Software Foundation; version 2 of the License. |
| 30 | |
| 31 | This program is distributed in the hope that it will be useful, |
| 32 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 33 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 34 | GNU General Public License for more details. |
| 35 | |
| 36 | NO WARRANTY |
| 37 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 38 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 39 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 40 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 41 | solely responsible for determining the appropriateness of using and |
| 42 | distributing the Program and assumes all risks associated with its |
| 43 | exercise of rights under this Agreement, including but not limited to |
| 44 | the risks and costs of program errors, damage to or loss of data, |
| 45 | programs or equipment, and unavailability or interruption of operations. |
| 46 | |
| 47 | DISCLAIMER OF LIABILITY |
| 48 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 49 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 50 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 51 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 52 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 53 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 54 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 55 | |
| 56 | You should have received a copy of the GNU General Public License |
| 57 | along with this program; if not, write to the Free Software |
| 58 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 59 | */ |
| 60 | |
| 61 | #ifndef MPTCTL_H_INCLUDED |
| 62 | #define MPTCTL_H_INCLUDED |
| 63 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 64 | |
| 65 | #include "linux/version.h" |
| 66 | |
| 67 | |
| 68 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 69 | /* |
| 70 | * |
| 71 | */ |
| 72 | #define MPT_MISCDEV_BASENAME "mptctl" |
| 73 | #define MPT_MISCDEV_PATHNAME "/dev/" MPT_MISCDEV_BASENAME |
| 74 | |
| 75 | #define MPT_PRODUCT_LENGTH 12 |
| 76 | |
| 77 | /* |
| 78 | * Generic MPT Control IOCTLs and structures |
| 79 | */ |
| 80 | #define MPT_MAGIC_NUMBER 'm' |
| 81 | |
| 82 | #define MPTRWPERF _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w) |
| 83 | |
| 84 | #define MPTFWDOWNLOAD _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer) |
| 85 | #define MPTCOMMAND _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command) |
| 86 | |
| 87 | #if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 88 | #define MPTFWDOWNLOAD32 _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32) |
| 89 | #define MPTCOMMAND32 _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32) |
| 90 | #endif |
| 91 | |
| 92 | #define MPTIOCINFO _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo) |
| 93 | #define MPTIOCINFO1 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0) |
| 94 | #define MPTIOCINFO2 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1) |
| 95 | #define MPTTARGETINFO _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo) |
| 96 | #define MPTTEST _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test) |
| 97 | #define MPTEVENTQUERY _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery) |
| 98 | #define MPTEVENTENABLE _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable) |
| 99 | #define MPTEVENTREPORT _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport) |
| 100 | #define MPTHARDRESET _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset) |
| 101 | #define MPTFWREPLACE _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw) |
| 102 | |
| 103 | /* |
| 104 | * SPARC PLATFORM REMARKS: |
| 105 | * IOCTL data structures that contain pointers |
| 106 | * will have different sizes in the driver and applications |
| 107 | * (as the app. will not use 8-byte pointers). |
| 108 | * Apps should use MPTFWDOWNLOAD and MPTCOMMAND. |
| 109 | * The driver will convert data from |
| 110 | * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command) |
| 111 | * internally. |
| 112 | * |
| 113 | * If data structures change size, must handle as in IOCGETINFO. |
| 114 | */ |
| 115 | struct mpt_fw_xfer { |
| 116 | unsigned int iocnum; /* IOC unit number */ |
| 117 | unsigned int fwlen; |
| 118 | void __user *bufp; /* Pointer to firmware buffer */ |
| 119 | }; |
| 120 | |
| 121 | #if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 122 | struct mpt_fw_xfer32 { |
| 123 | unsigned int iocnum; |
| 124 | unsigned int fwlen; |
| 125 | u32 bufp; |
| 126 | }; |
| 127 | #endif /*}*/ |
| 128 | |
| 129 | /* |
| 130 | * IOCTL header structure. |
| 131 | * iocnum - must be defined. |
| 132 | * port - must be defined for all IOCTL commands other than MPTIOCINFO |
| 133 | * maxDataSize - ignored on MPTCOMMAND commands |
| 134 | * - ignored on MPTFWREPLACE commands |
| 135 | * - on query commands, reports the maximum number of bytes to be returned |
| 136 | * to the host driver (count includes the header). |
| 137 | * That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands. |
| 138 | * Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable |
| 139 | * sized commands. (MPTTARGETINFO, MPTEVENTREPORT) |
| 140 | */ |
| 141 | typedef struct _mpt_ioctl_header { |
| 142 | unsigned int iocnum; /* IOC unit number */ |
| 143 | unsigned int port; /* IOC port number */ |
| 144 | int maxDataSize; /* Maximum Num. bytes to transfer on read */ |
| 145 | } mpt_ioctl_header; |
| 146 | |
| 147 | /* |
| 148 | * Issue a diagnostic reset |
| 149 | */ |
| 150 | struct mpt_ioctl_diag_reset { |
| 151 | mpt_ioctl_header hdr; |
| 152 | }; |
| 153 | |
| 154 | |
| 155 | /* |
| 156 | * PCI bus/device/function information structure. |
| 157 | */ |
| 158 | struct mpt_ioctl_pci_info { |
| 159 | union { |
| 160 | struct { |
| 161 | unsigned int deviceNumber : 5; |
| 162 | unsigned int functionNumber : 3; |
| 163 | unsigned int busNumber : 24; |
| 164 | } bits; |
| 165 | unsigned int asUlong; |
| 166 | } u; |
| 167 | }; |
| 168 | |
| 169 | struct mpt_ioctl_pci_info2 { |
| 170 | union { |
| 171 | struct { |
| 172 | unsigned int deviceNumber : 5; |
| 173 | unsigned int functionNumber : 3; |
| 174 | unsigned int busNumber : 24; |
| 175 | } bits; |
| 176 | unsigned int asUlong; |
| 177 | } u; |
| 178 | int segmentID; |
| 179 | }; |
| 180 | |
| 181 | /* |
| 182 | * Adapter Information Page |
| 183 | * Read only. |
| 184 | * Data starts at offset 0xC |
| 185 | */ |
| 186 | #define MPT_IOCTL_INTERFACE_FC (0x01) |
| 187 | #define MPT_IOCTL_INTERFACE_SCSI (0x00) |
| 188 | #define MPT_IOCTL_VERSION_LENGTH (32) |
| 189 | |
| 190 | struct mpt_ioctl_iocinfo { |
| 191 | mpt_ioctl_header hdr; |
| 192 | int adapterType; /* SCSI or FCP */ |
| 193 | int port; /* port number */ |
| 194 | int pciId; /* PCI Id. */ |
| 195 | int hwRev; /* hardware revision */ |
| 196 | int subSystemDevice; /* PCI subsystem Device ID */ |
| 197 | int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 198 | int numDevices; /* number of devices */ |
| 199 | int FWVersion; /* FW Version (integer) */ |
| 200 | int BIOSVersion; /* BIOS Version (integer) */ |
| 201 | char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 202 | char busChangeEvent; |
| 203 | char hostId; |
| 204 | char rsvd[2]; |
| 205 | struct mpt_ioctl_pci_info2 pciInfo; /* Added Rev 2 */ |
| 206 | }; |
| 207 | |
| 208 | struct mpt_ioctl_iocinfo_rev1 { |
| 209 | mpt_ioctl_header hdr; |
| 210 | int adapterType; /* SCSI or FCP */ |
| 211 | int port; /* port number */ |
| 212 | int pciId; /* PCI Id. */ |
| 213 | int hwRev; /* hardware revision */ |
| 214 | int subSystemDevice; /* PCI subsystem Device ID */ |
| 215 | int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 216 | int numDevices; /* number of devices */ |
| 217 | int FWVersion; /* FW Version (integer) */ |
| 218 | int BIOSVersion; /* BIOS Version (integer) */ |
| 219 | char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 220 | char busChangeEvent; |
| 221 | char hostId; |
| 222 | char rsvd[2]; |
| 223 | struct mpt_ioctl_pci_info pciInfo; /* Added Rev 1 */ |
| 224 | }; |
| 225 | |
| 226 | /* Original structure, must always accept these |
| 227 | * IOCTLs. 4 byte pads can occur based on arch with |
| 228 | * above structure. Wish to re-align, but cannot. |
| 229 | */ |
| 230 | struct mpt_ioctl_iocinfo_rev0 { |
| 231 | mpt_ioctl_header hdr; |
| 232 | int adapterType; /* SCSI or FCP */ |
| 233 | int port; /* port number */ |
| 234 | int pciId; /* PCI Id. */ |
| 235 | int hwRev; /* hardware revision */ |
| 236 | int subSystemDevice; /* PCI subsystem Device ID */ |
| 237 | int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 238 | int numDevices; /* number of devices */ |
| 239 | int FWVersion; /* FW Version (integer) */ |
| 240 | int BIOSVersion; /* BIOS Version (integer) */ |
| 241 | char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 242 | char busChangeEvent; |
| 243 | char hostId; |
| 244 | char rsvd[2]; |
| 245 | }; |
| 246 | |
| 247 | /* |
| 248 | * Device Information Page |
| 249 | * Report the number of, and ids of, all targets |
| 250 | * on this IOC. The ids array is a packed structure |
| 251 | * of the known targetInfo. |
| 252 | * bits 31-24: reserved |
| 253 | * 23-16: LUN |
| 254 | * 15- 8: Bus Number |
| 255 | * 7- 0: Target ID |
| 256 | */ |
| 257 | struct mpt_ioctl_targetinfo { |
| 258 | mpt_ioctl_header hdr; |
| 259 | int numDevices; /* Num targets on this ioc */ |
| 260 | int targetInfo[1]; |
| 261 | }; |
| 262 | |
| 263 | |
| 264 | /* |
| 265 | * Event reporting IOCTL's. These IOCTL's will |
| 266 | * use the following defines: |
| 267 | */ |
| 268 | struct mpt_ioctl_eventquery { |
| 269 | mpt_ioctl_header hdr; |
| 270 | unsigned short eventEntries; |
| 271 | unsigned short reserved; |
| 272 | unsigned int eventTypes; |
| 273 | }; |
| 274 | |
| 275 | struct mpt_ioctl_eventenable { |
| 276 | mpt_ioctl_header hdr; |
| 277 | unsigned int eventTypes; |
| 278 | }; |
| 279 | |
| 280 | #ifndef __KERNEL__ |
| 281 | typedef struct { |
| 282 | uint event; |
| 283 | uint eventContext; |
| 284 | uint data[2]; |
| 285 | } MPT_IOCTL_EVENTS; |
| 286 | #endif |
| 287 | |
| 288 | struct mpt_ioctl_eventreport { |
| 289 | mpt_ioctl_header hdr; |
| 290 | MPT_IOCTL_EVENTS eventData[1]; |
| 291 | }; |
| 292 | |
| 293 | #define MPT_MAX_NAME 32 |
| 294 | struct mpt_ioctl_test { |
| 295 | mpt_ioctl_header hdr; |
| 296 | u8 name[MPT_MAX_NAME]; |
| 297 | int chip_type; |
| 298 | u8 product [MPT_PRODUCT_LENGTH]; |
| 299 | }; |
| 300 | |
| 301 | /* Replace the FW image cached in host driver memory |
| 302 | * newImageSize - image size in bytes |
| 303 | * newImage - first byte of the new image |
| 304 | */ |
| 305 | typedef struct mpt_ioctl_replace_fw { |
| 306 | mpt_ioctl_header hdr; |
| 307 | int newImageSize; |
| 308 | u8 newImage[1]; |
| 309 | } mpt_ioctl_replace_fw_t; |
| 310 | |
| 311 | /* General MPT Pass through data strucutre |
| 312 | * |
| 313 | * iocnum |
| 314 | * timeout - in seconds, command timeout. If 0, set by driver to |
| 315 | * default value. |
| 316 | * replyFrameBufPtr - reply location |
| 317 | * dataInBufPtr - destination for read |
| 318 | * dataOutBufPtr - data source for write |
| 319 | * senseDataPtr - sense data location |
| 320 | * maxReplyBytes - maximum number of reply bytes to be sent to app. |
| 321 | * dataInSize - num bytes for data transfer in (read) |
| 322 | * dataOutSize - num bytes for data transfer out (write) |
| 323 | * dataSgeOffset - offset in words from the start of the request message |
| 324 | * to the first SGL |
| 325 | * MF[1]; |
| 326 | * |
| 327 | * Remark: Some config pages have bi-directional transfer, |
| 328 | * both a read and a write. The basic structure allows for |
| 329 | * a bidirectional set up. Normal messages will have one or |
| 330 | * both of these buffers NULL. |
| 331 | */ |
| 332 | struct mpt_ioctl_command { |
| 333 | mpt_ioctl_header hdr; |
| 334 | int timeout; /* optional (seconds) */ |
| 335 | char __user *replyFrameBufPtr; |
| 336 | char __user *dataInBufPtr; |
| 337 | char __user *dataOutBufPtr; |
| 338 | char __user *senseDataPtr; |
| 339 | int maxReplyBytes; |
| 340 | int dataInSize; |
| 341 | int dataOutSize; |
| 342 | int maxSenseBytes; |
| 343 | int dataSgeOffset; |
| 344 | char MF[1]; |
| 345 | }; |
| 346 | |
| 347 | /* |
| 348 | * SPARC PLATFORM: See earlier remark. |
| 349 | */ |
| 350 | #if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 351 | struct mpt_ioctl_command32 { |
| 352 | mpt_ioctl_header hdr; |
| 353 | int timeout; |
| 354 | u32 replyFrameBufPtr; |
| 355 | u32 dataInBufPtr; |
| 356 | u32 dataOutBufPtr; |
| 357 | u32 senseDataPtr; |
| 358 | int maxReplyBytes; |
| 359 | int dataInSize; |
| 360 | int dataOutSize; |
| 361 | int maxSenseBytes; |
| 362 | int dataSgeOffset; |
| 363 | char MF[1]; |
| 364 | }; |
| 365 | #endif /*}*/ |
| 366 | |
| 367 | |
| 368 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 369 | /* |
| 370 | * HP Specific IOCTL Defines and Structures |
| 371 | */ |
| 372 | |
| 373 | #define CPQFCTS_IOC_MAGIC 'Z' |
| 374 | #define HP_IOC_MAGIC 'Z' |
| 375 | #define HP_GETHOSTINFO _IOR(HP_IOC_MAGIC, 20, hp_host_info_t) |
| 376 | #define HP_GETHOSTINFO1 _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t) |
| 377 | #define HP_GETTARGETINFO _IOR(HP_IOC_MAGIC, 21, hp_target_info_t) |
| 378 | |
| 379 | /* All HP IOCTLs must include this header |
| 380 | */ |
| 381 | typedef struct _hp_header { |
| 382 | unsigned int iocnum; |
| 383 | unsigned int host; |
| 384 | unsigned int channel; |
| 385 | unsigned int id; |
| 386 | unsigned int lun; |
| 387 | } hp_header_t; |
| 388 | |
| 389 | /* |
| 390 | * Header: |
| 391 | * iocnum required (input) |
| 392 | * host ignored |
| 393 | * channe ignored |
| 394 | * id ignored |
| 395 | * lun ignored |
| 396 | */ |
| 397 | typedef struct _hp_host_info { |
| 398 | hp_header_t hdr; |
| 399 | u16 vendor; |
| 400 | u16 device; |
| 401 | u16 subsystem_vendor; |
| 402 | u16 subsystem_id; |
| 403 | u8 devfn; |
| 404 | u8 bus; |
| 405 | ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ |
| 406 | u8 fw_version[16]; /* string */ |
| 407 | u8 serial_number[24]; /* string */ |
| 408 | u32 ioc_status; |
| 409 | u32 bus_phys_width; |
| 410 | u32 base_io_addr; |
| 411 | u32 rsvd; |
| 412 | unsigned int hard_resets; /* driver initiated resets */ |
| 413 | unsigned int soft_resets; /* ioc, external resets */ |
| 414 | unsigned int timeouts; /* num timeouts */ |
| 415 | } hp_host_info_t; |
| 416 | |
| 417 | /* replace ulongs with uints, need to preserve backwards |
| 418 | * compatibility. |
| 419 | */ |
| 420 | typedef struct _hp_host_info_rev0 { |
| 421 | hp_header_t hdr; |
| 422 | u16 vendor; |
| 423 | u16 device; |
| 424 | u16 subsystem_vendor; |
| 425 | u16 subsystem_id; |
| 426 | u8 devfn; |
| 427 | u8 bus; |
| 428 | ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ |
| 429 | u8 fw_version[16]; /* string */ |
| 430 | u8 serial_number[24]; /* string */ |
| 431 | u32 ioc_status; |
| 432 | u32 bus_phys_width; |
| 433 | u32 base_io_addr; |
| 434 | u32 rsvd; |
| 435 | unsigned long hard_resets; /* driver initiated resets */ |
| 436 | unsigned long soft_resets; /* ioc, external resets */ |
| 437 | unsigned long timeouts; /* num timeouts */ |
| 438 | } hp_host_info_rev0_t; |
| 439 | |
| 440 | /* |
| 441 | * Header: |
| 442 | * iocnum required (input) |
| 443 | * host required |
| 444 | * channel required (bus number) |
| 445 | * id required |
| 446 | * lun ignored |
| 447 | * |
| 448 | * All error values between 0 and 0xFFFF in size. |
| 449 | */ |
| 450 | typedef struct _hp_target_info { |
| 451 | hp_header_t hdr; |
| 452 | u32 parity_errors; |
| 453 | u32 phase_errors; |
| 454 | u32 select_timeouts; |
| 455 | u32 message_rejects; |
| 456 | u32 negotiated_speed; |
| 457 | u8 negotiated_width; |
| 458 | u8 rsvd[7]; /* 8 byte alignment */ |
| 459 | } hp_target_info_t; |
| 460 | |
| 461 | #define HP_STATUS_OTHER 1 |
| 462 | #define HP_STATUS_OK 2 |
| 463 | #define HP_STATUS_FAILED 3 |
| 464 | |
| 465 | #define HP_BUS_WIDTH_UNK 1 |
| 466 | #define HP_BUS_WIDTH_8 2 |
| 467 | #define HP_BUS_WIDTH_16 3 |
| 468 | #define HP_BUS_WIDTH_32 4 |
| 469 | |
| 470 | #define HP_DEV_SPEED_ASYNC 2 |
| 471 | #define HP_DEV_SPEED_FAST 3 |
| 472 | #define HP_DEV_SPEED_ULTRA 4 |
| 473 | #define HP_DEV_SPEED_ULTRA2 5 |
| 474 | #define HP_DEV_SPEED_ULTRA160 6 |
| 475 | #define HP_DEV_SPEED_SCSI1 7 |
| 476 | #define HP_DEV_SPEED_ULTRA320 8 |
| 477 | |
| 478 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 479 | |
| 480 | |
| 481 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 482 | |
| 483 | #endif |
| 484 | |