)]}' { "log": [ { "commit": "a6862da2f3c7ce3ec6644958bc8937b630b9e2c1", "tree": "aba32f7abec46cbecdaa1e1ee250120f8ddc49c8", "parents": [ "e17d787c513f41f59969247062561fff6340f211" ], "author": { "name": "Mike Isely", "email": "isely@pobox.com", "time": "Sat Jun 20 14:50:14 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:15:05 2009 -0300" }, "message": "V4L/DVB (12119): pvrusb2: Re-fix hardware scaling on video standard change\n\nThe cx25840 module\u0027s VBI initialization logic uses the current video\nstandard as part of its internal algorithm. This therefore means that\nwe probably need to make sure that the correct video standard has been\nset before initializing VBI. (Normally we would not care about VBI,\nbut as described in an earlier changeset, VBI must be initialized\ncorrectly on the cx25840 in order for the chip\u0027s hardware scaler to\noperate correctly.)\n\nIt\u0027s kind of messy to force the video standard to be set before\ninitializing VBI (mainly because we can\u0027t know what the app really\nwants that early in the initialization process). So this patch does\nthe next best thing: VBI is re-initialized after any point where the\nvideo standard has been set.\n\nSigned-off-by: Mike Isely \u003cisely@pobox.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e17d787c513f41f59969247062561fff6340f211", "tree": "3353048a11f1cef8a1861bf378880a8705b3e973", "parents": [ "b34cdc36c4aad10cf4eaadacf067835d6a622f1b" ], "author": { "name": "Mike Isely", "email": "isely@pobox.com", "time": "Sat Jun 20 14:45:52 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:15:01 2009 -0300" }, "message": "V4L/DVB (12118): pvrusb2: Fix hardware scaling when used with cx25840\n\nThe cx25840 module requires that its VBI initialization entry point be\ncalled in order for hardware-scaled video capture to work properly -\neven if we don\u0027t care about VBI. Making this behavior even more\nsubtle is that if the capture resolution is set to 720x480 - which is\nthe default that the pvrusb2 driver sets up - then the cx25840\nbypasses the hardware scaler. Therefore this problem does not\nmanifest itself until some other resolution, e.g. 640x480, is tried.\nMythTV typically defaults to 640x480 or 480x480, which means that\nthings break whenever the driver is used with MythTV.\n\nThis all has been known for a while (since at least Nov 2006), but\nrecent changes in the pvrusb2 driver (specifically in regards to\nsub-device support) caused this to break again. VBI initialization\nmust happen *after* the chip\u0027s firmware is loaded, not before. With\nthis fix, 24xxx devices work correctly again.\n\nA related fix that is part of this changeset is that now we\nre-initialize VBI any time after we issue a reset to the cx25840\ndriver. Issuing a chip reset erases the state that the VBI setup\npreviously did. Until the HVR-1950 came along this subtlety went\nunnoticed, because the pvrusb2 driver previously never issued such a\nreset. But with the HVR-1950 we have to do that reset in order to\ncorrectly transition from digital back to analog mode - and since the\nHVR-1950 always starts in digital mode (required for the DVB side to\ninitialize correctly) then this device has never had a chance to work\ncorrectly in analog mode! Analog capture on the HVR-1950 has been\nbroken this *ENTIRE* time. I had missed it until now because I\u0027ve\nusually been testing at the default 720x480 resolution which does not\nrequire scaling... What fun. By re-initializing VBI after a cx25840\nchip reset, correct behavior is restored.\n\nSigned-off-by: Mike Isely \u003cisely@pobox.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b34cdc36c4aad10cf4eaadacf067835d6a622f1b", "tree": "0e9fcadba609f965953819f828afb8b02b42a031", "parents": [ "9d68fc0ad40b852470026ee58a07e1d662571d04" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Thu May 21 12:49:28 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:58 2009 -0300" }, "message": "V4L/DVB (12116): cx23885: ensure correct IF freq is used on HVR1200 \u0026 HVR1700\n\nEnsure that we\u0027re programming the tda18271 tuner with the correct\nIF frequencies to match the programming of the TDA10048 DVB-T demod\nfor the HVR1200 and HVR1700 products.\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "9d68fc0ad40b852470026ee58a07e1d662571d04", "tree": "66471d3aca7bed1c29b9bd480bee96768129033e", "parents": [ "aad40d3d0cd9b679e83f6a902ad1e2b8f7b4c9bb" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Fri Jun 19 16:21:37 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:56 2009 -0300" }, "message": "V4L/DVB (12115): tda10048: add missing entry to pll_tab for 3.8 MHz IF\n\nThanks for Terry Wu for pointing out the missing entry.\n\nCc: Terry Wu \u003cterrywu2009@gmail.com\u003e\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "aad40d3d0cd9b679e83f6a902ad1e2b8f7b4c9bb", "tree": "b7efc5a124e98e080c69334145e13a6e49b45c5c", "parents": [ "54bb501c069bbe34cf8becf0a9985fc6873d6b21" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Jun 20 09:21:37 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:52 2009 -0300" }, "message": "V4L/DVB (12112): cx231xx: fix uninitialized variable.\n\nThe variable \u0027rc\u0027 could be used uninitialized in the cx231xx_capture_start\nfunction. Sri informed me that it should be initialized to -1.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "54bb501c069bbe34cf8becf0a9985fc6873d6b21", "tree": "7361c0a4f9a32ad9993c3d861a3e946f88f9a27d", "parents": [ "5543e2b4c495714e5f1b2dbbe250df15239af1cd" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Jun 20 09:18:34 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:48 2009 -0300" }, "message": "V4L/DVB (12111): tcm825x: remove incorrect __exit_p wrapper\n\ntcm825x_remove is not necessarily called on module exit, it can also be\ncalled when the i2c_adapter is removed. While the i2c adapter might never\nbe removed on an embedded system, in practice this sensor driver can also\nbe used in e.g. a USB webcam where this is a perfectly acceptable thing\nto do.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "5543e2b4c495714e5f1b2dbbe250df15239af1cd", "tree": "21e3eafc99ce3320c3ee5655407d93027aa439a2", "parents": [ "719cd4ab9695059e00f5248d1dceb534381fccb3" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Jun 20 06:29:12 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:43 2009 -0300" }, "message": "V4L/DVB (12109): radio-tea5764: fix incorrect rxsubchans value\n\nrxsubchans was only set when stereo was detected, otherwise it was\nleft to 0 instead of setting it to mono.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "719cd4ab9695059e00f5248d1dceb534381fccb3", "tree": "7aac75d4b17c0b9c7033180f5fa8110a097bf09a", "parents": [ "be5daa9bd220d384c7010aee6d3886279a61a183" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sun Jun 14 07:12:11 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:39 2009 -0300" }, "message": "V4L/DVB (12108): v4l2-i2c-drv.h: add comment describing when not to use this header.\n\nMake it very clear that this header should not be used for i2c drivers that\ndo not need to be compiled for pre-2.6.26 kernels.\n\nAs soon as the minimum supported kernel in the v4l-dvb repository becomes\n2.6.26 or up, then this header should be removed entirely.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "be5daa9bd220d384c7010aee6d3886279a61a183", "tree": "df87335f8a97a8d5a9fd164f43cb118af0a326f7", "parents": [ "c6711c3e6d4976716633047c0f6bbd953d6831fb" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sun Jun 14 06:47:35 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:35 2009 -0300" }, "message": "V4L/DVB (12107): smscoreapi: fix compile warning\n\ngcc 4.3.1 generates this warning:\n\nv4l/smscoreapi.c: In function \u0027smscore_gpio_configure\u0027:\nv4l/smscoreapi.c:1481: warning: \u0027GroupNum\u0027 may be used uninitialized in this function\nv4l/smscoreapi.c:1480: warning: \u0027TranslatedPinNum\u0027 may be used uninitialized in this function\n\nWhile in practice this will not happen, it is something that the compiler\ncan\u0027t determine. Initializing these two local variables to 0 suppresses\nthis warning.\n\nCc: Udi Atar \u003cudi.linuxtv@gmail.com\u003e\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "c6711c3e6d4976716633047c0f6bbd953d6831fb", "tree": "ca6bace327d774d50f429ac6ace9bfb30fa14b93", "parents": [ "a4c473033b6a100773a4fd8b7ba1e45baeb1e692" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sun Jun 14 05:20:21 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:31 2009 -0300" }, "message": "V4L/DVB (12104): ivtv/cx18: fix regression: class controls are no longer seen\n\nA previous change (v4l2-common: remove v4l2_ctrl_query_fill_std) broke\nthe handling of class controls in VIDIOC_QUERYCTRL. The MPEG class control\nwas broken for all drivers that use the cx2341x module and the USER class\ncontrol was broken for ivtv and cx18.\n\nThis change adds back proper class control support.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a4c473033b6a100773a4fd8b7ba1e45baeb1e692", "tree": "01465e084c65c49e0f2ea0586b83ef03385cdc84", "parents": [ "19859229d7d98bc2d582ff45045dd7f73d649383" ], "author": { "name": "Devin Heitmueller", "email": "dheitmueller@kernellabs.com", "time": "Sat Jun 20 21:34:42 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:25 2009 -0300" }, "message": "V4L/DVB (12102): em28xx: add Remote control support for EVGA inDtube\n\nAdd an IR profile for the EVGA inDtube remote control (which is an NEC type\nremote)\n\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "19859229d7d98bc2d582ff45045dd7f73d649383", "tree": "cdbed4c93686baea5375d29c103d3a31c35365c6", "parents": [ "cdf7bfa8926fb26d5900103ae09eb5f3eddb95cc" ], "author": { "name": "Devin Heitmueller", "email": "dheitmueller@kernellabs.com", "time": "Fri Jun 19 00:33:54 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:21 2009 -0300" }, "message": "V4L/DVB (12101): em28xx: add support for EVGA inDtube\n\nAdd support for the EVGA inDtube. Both ATSC and analog side validated as\nfully functional.\n\nThanks to Jake Crimmins from EVGA for providing the correct GPIO info.\nThanks to Alan Hagge for doing all the device testing.\nThanks to Greg Williamson for providing hardware for testing.\n\nCc: Jake Crimmins \u003cjcrimmins@evga.com\u003e\nCc: Alan Hagge \u003cahagge@gmail.com\u003e\nCc: Greg Williamson \u003ccheeseboy16@gmail.com\u003e\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "cdf7bfa8926fb26d5900103ae09eb5f3eddb95cc", "tree": "7b20b253b717678c71a4343546ec4e123be6e2e7", "parents": [ "f867c3f4eab1d5006df4f3734fab1134feffbeba" ], "author": { "name": "Devin Heitmueller", "email": "dheitmueller@kernellabs.com", "time": "Fri Jun 19 00:20:28 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:16 2009 -0300" }, "message": "V4L/DVB (12100): em28xx: make sure the analog GPIOs are set if we used a card hint\n\nIn cases where the board had a default USB ID, we would not indentify the\nboard until after the call to em28xx_set_mode(). As a result, for those\nboards the analog GPIOs were not being set before probing the i2c bus for\ndevices (the probe would occur with the GPIOs being all high).\n\nMake a call to em28xx_set_mode() so that the GPIOs are set properly before\nprobing the i2c bus for devices.\n\nThis problem was detected with the EVGA inDtube, where the tvp5150 is not\npowered on unless GPIO1 is pulled low.\n\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f867c3f4eab1d5006df4f3734fab1134feffbeba", "tree": "201173fa992dab326ec674def03247e58863149e", "parents": [ "ee1ebcfea6ee16491f88e8023554dd214e1ba85c" ], "author": { "name": "Igor M. Liplianin", "email": "liplianin@netup.ru", "time": "Fri Jun 19 05:45:23 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:12 2009 -0300" }, "message": "V4L/DVB (12098): Create table for customize stv0900 ts registers.\n\nSigned-off-by: Igor M. Liplianin \u003cliplianin@netup.ru\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ee1ebcfea6ee16491f88e8023554dd214e1ba85c", "tree": "b2571a6a0c85b66a9a7b5890632a6d27d29a685d", "parents": [ "68191edeb50773993f4a05651b0a085bd110fbeb" ], "author": { "name": "Abylay Ospan", "email": "aospan@netup.ru", "time": "Mon Jun 08 04:31:26 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:07 2009 -0300" }, "message": "V4L/DVB (12097): Implement reading uncorrected blocks for stv0900\n\nSigned-off-by: Abylay Ospan \u003caospan@netup.ru\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "68191edeb50773993f4a05651b0a085bd110fbeb", "tree": "4beb0d7a9ae0f353b2f36237c4374da63987a7c1", "parents": [ "0cde9b2533d6fe79307173f24209228aaf34bc98" ], "author": { "name": "Abylay Ospan", "email": "aospan@netup.ru", "time": "Sun Jun 14 14:10:05 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:14:03 2009 -0300" }, "message": "V4L/DVB (12096): Bug fix: stv0900 register read must using i2c in one transaction\n\nSigned-off-by: Abylay Ospan \u003caospan@netup.ru\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0cde9b2533d6fe79307173f24209228aaf34bc98", "tree": "a8010790bf69d349cf6faa746805d4bca6da4e58", "parents": [ "3fb4a57b494e05dba4d1305e2347c6633b76c20e" ], "author": { "name": "Igor M. Liplianin", "email": "liplianin@netup.ru", "time": "Sun Jun 14 13:17:15 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:59 2009 -0300" }, "message": "V4L/DVB (12095): Change lnbh24 configure bits for NetUP card.\n\nSigned-off-by: Igor M. Liplianin \u003cliplianin@netup.ru\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "3fb4a57b494e05dba4d1305e2347c6633b76c20e", "tree": "b6191c561118c431456a467ad300adb006086295", "parents": [ "f800952c21157f11a5510d9cf700c9a7ba30800d" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 14:31:36 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:57 2009 -0300" }, "message": "V4L/DVB (12093): gspca_sonixj: Name saturation control saturation, not color\n\nName saturation control saturation, not color and make the default\nless saturated (the old default was overdoing it).\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f800952c21157f11a5510d9cf700c9a7ba30800d", "tree": "4f43a7786679abf6c26b779bedfbd50d942e3429", "parents": [ "37c6dbe290c05023b47f52528e30ce51336b93eb" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 14:29:20 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:54 2009 -0300" }, "message": "V4L/DVB (12092): gspca_sonixj + ov7630: invert vflip control instead of changing default\n\ngspca_sonixj + ov7630 had the default value for flip enabled, as otherwise\nthe picture is upside down. It is better to instead invert the meaning\nof the control in the set function, and have the default be no vflip,\nas one would expect vflip enabled to be upside down.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "37c6dbe290c05023b47f52528e30ce51336b93eb", "tree": "2fbfa66d28b283b8a1b81a4e7cc5df47195c2228", "parents": [ "1fec747cd389b4812a9932a1416d76e8a53596b2" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 07:35:36 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:49 2009 -0300" }, "message": "V4L/DVB (12091): gspca_sonixj: Add light frequency control\n\ngspca_sonixj: Add light frequency control\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1fec747cd389b4812a9932a1416d76e8a53596b2", "tree": "9af3bf62f0927c45ee497d6801cb8070ba90e0b7", "parents": [ "a5d1cc39fee739cf4fc2a1f43da812c50de9d3d6" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 06:05:07 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:45 2009 -0300" }, "message": "V4L/DVB (12090): gspca_sonixj: enable autogain control for the ov7620\n\ngspca_sonixj: enable autogain control for the ov7620, and not only\nmake it enable autogain but also auto exposure (and do the\nsame for the ov7648).\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a5d1cc39fee739cf4fc2a1f43da812c50de9d3d6", "tree": "f5b60de061174a487cf5f54c4cb82ebd70c5b27b", "parents": [ "119893b2dfb18515bfdcc5edb83422e6aa126a86" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 06:03:20 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:38 2009 -0300" }, "message": "V4L/DVB (12089): gspca_sonixj: increase 640x480 frame-buffersize\n\ngspca_sonixj: increase 640x480 frame-buffersize, as I was getting buffer\noverflows during my testing of a \"Premier\" 0c45:613e cam\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "119893b2dfb18515bfdcc5edb83422e6aa126a86", "tree": "8b1a0288a9f53fe041cb005a76b49434095490dc", "parents": [ "cc7b5b573feb5edfe68c028bc1ea383dab37dde2" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 05:20:51 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:33 2009 -0300" }, "message": "V4L/DVB (12088): Mark the v4l1 uvcvideo quickcam messenger driver as deprecated\n\nMark the v4l1 uvcvideo quickcam messenger driver as deprecated, the one\ncam it supports, is now also supported by the v4l2 gspca stv06xx driver.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "cc7b5b573feb5edfe68c028bc1ea383dab37dde2", "tree": "a447f52ce76d18a71d901a505b5a1608fce734cd", "parents": [ "9764398bdeef49414b37ef8bd35abfec1f44bd3e" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 05:14:42 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:29 2009 -0300" }, "message": "V4L/DVB (12087): gspca_sonixj: enable support for 0c45:613e camera\n\ngspca_sonixj: enable support for 0c45:613e camera, and slightly tweak\nthe ov7630 register init values for a much better picture.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "9764398bdeef49414b37ef8bd35abfec1f44bd3e", "tree": "68c8e49400f8e9ed5a576ed855c9a605423f9398", "parents": [ "e080fcd9298d544f3233d8c45304990be1920b3d" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 05:08:11 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:26 2009 -0300" }, "message": "V4L/DVB (12086): gspca_sonixj: Fix control index numbering\n\nThe control index defines for the gspca_sonixj driver were numbered\nwrong, causing us to disable the wrong controls on various sensors\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e080fcd9298d544f3233d8c45304990be1920b3d", "tree": "869b909cfe2600ed4e86deda773c07258bc8e908", "parents": [ "0220f8870e66628f19c36bad813e881ebfaae7a6" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Thu Jun 18 05:03:16 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:22 2009 -0300" }, "message": "V4L/DVB (12085): gspca_ov519: constify ov518 inititial register value tables\n\ngspca_ov519: constify ov518 inititial register value tables\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0220f8870e66628f19c36bad813e881ebfaae7a6", "tree": "17973be8c8c2ceee268bb5d8ec3ccc648430c826", "parents": [ "98b1e9be882eff0f00bb5770ced9d9b24eb0238c" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jun 17 18:50:10 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:18 2009 -0300" }, "message": "V4L/DVB (12084): ov511: mark as deprecated\n\nMark the v4l1 ov511 as deprecated as we now have ov511 support in\nthe gspca ov519 driver. Note we should really also keep track of this\nin Documentation/feature-removal-schedule.txt, but that is not\npart of the v4l-dvb tree.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "98b1e9be882eff0f00bb5770ced9d9b24eb0238c", "tree": "ab921b34c327e3bf1ddf1959ece3d0b858080f27", "parents": [ "8668d504d72c384fbfb6ab6f5d02a9fe4d813554" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jun 17 18:41:01 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:16 2009 -0300" }, "message": "V4L/DVB (12083): ov511: remove ov518 usb id\u0027s from the driver\n\nov511: remove ov518 usb id\u0027s from the driver, as they have not been working\never since the decompression code got removed from the kernel, and they\nare no supported by the gspca_ov519 module.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "8668d504d72c384fbfb6ab6f5d02a9fe4d813554", "tree": "4ba923b0a7ccda8121960231e758135ba9bd584a", "parents": [ "ae49c40461d8981b232e3fec28234d492067f0e1" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jun 17 18:37:57 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:13:11 2009 -0300" }, "message": "V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor\n\nAdd support for st6422 bridge and sensor to the stv06xx gspca sub driver,\ntested with:\nLogitech QuickCam Messenger 046d:08f0 ST6422 integrated\nLogitech QuickCam Mess. Plus 046d:08f6 ST6422 integrated\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ae49c40461d8981b232e3fec28234d492067f0e1", "tree": "943c34266c9ef36745cf34a784e53bf2fadbb0fb", "parents": [ "b282d87332f5b3c2ac2e289f772b33067e4be77b" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 19:15:07 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:12:50 2009 -0300" }, "message": "V4L/DVB (12081): gspca_ov519: Cleanup some sensor special cases\n\ngspca_ov519: Cleanup some sensor special cases\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b282d87332f5b3c2ac2e289f772b33067e4be77b", "tree": "4e025e4d818e1ddf71c501dd695de87c230ab8cf", "parents": [ "1876bb923c98c605eca69f0bfe295f7b5f5eba28" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 19:10:40 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:12:47 2009 -0300" }, "message": "V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)\n\ngspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1876bb923c98c605eca69f0bfe295f7b5f5eba28", "tree": "ddc996e7e15a9ec803e5cfeb8bf341af30fae7fa", "parents": [ "f5cee95c2e4c56b50cdb8edd33cf04902946cd25" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 06:45:50 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:12:37 2009 -0300" }, "message": "V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge\n\ngspca_ov519: add support for the ov511 bridge\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f5cee95c2e4c56b50cdb8edd33cf04902946cd25", "tree": "c79ac918e7f32a9128b747abba3e99f37c6dd8a6", "parents": [ "80142efa715581c06d01b37f299a240309699ff4" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 06:32:52 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:12:32 2009 -0300" }, "message": "V4L/DVB (12078): gspca_ov519: Better default contrast for ov6630\n\nHmm, another one with an extra if (life sucks) the\ndefault contrast really is no good for the ov6630, it\nisn\u0027t even high enough in full daylight, this gives\nthe ov6630 a different initial value for a better out\nof the box experience.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "80142efa715581c06d01b37f299a240309699ff4", "tree": "31ccf889d5f2e45cbb1b7c54ba7488e66f35eee7", "parents": [ "9e4d82588174e68abe8e3568202f0b530415661f" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 06:26:49 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:12:08 2009 -0300" }, "message": "V4L/DVB (12077): gspca_ov519: Fix 320x240 with ov7660 sensor\n\nAs reported on the ov51x-jpeg list, and as I can confirm with my own cam\nthe ov7670 in 320x240 has a number of broken columns of pixels\nat the left of the picture. This was not present in the old\ndriver as it always used 640x480 and did software\ndownscaling (took me a while to figure that one out).\nThe fix adds a sensor specific if in so far sensor\nneutral code :( But this is the only way to fix this,\nthis cannot be fixed by only changing sensor registers.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "9e4d82588174e68abe8e3568202f0b530415661f", "tree": "191dc3d223ea2a0a3d538ef402fcee0cf0d7c12e", "parents": [ "92918a53ee74bb326430aaa958caa0cf111b54b1" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 06:25:06 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:49 2009 -0300" }, "message": "V4L/DVB (12076): gspca_ov519: Fix led inversion with some cams\n\nMy ov519 cam has it led inverted, the same has been\nreported on the ov51x-jpeg list for another\ncreative cam. This patch fixes this without changing\nthe behaviour for other cams.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "92918a53ee74bb326430aaa958caa0cf111b54b1", "tree": "405033eaf382dd1e61f06c5e892802def6535c2c", "parents": [ "124cc9c0c8acc77ac2f1114ee7eea961334020ba" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 06:21:35 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:40 2009 -0300" }, "message": "V4L/DVB (12075): gspca_ov519: check ov518 packet numbers\n\nCheck ov518 packet numbers to detect dropped packets.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "124cc9c0c8acc77ac2f1114ee7eea961334020ba", "tree": "9dc1a6fdeda3a5482c287fd86868732982433daf", "parents": [ "7d9713735d7537baf2b00be806a8de08a5c9f11b" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 05:48:00 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:24 2009 -0300" }, "message": "V4L/DVB (12074): gspca_ov519: Add 320x240 and 160x120 support for cif sensor cams\n\ngspca_ov519: Add 320x240 and 160x120 support for cif sensor cams\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "7d9713735d7537baf2b00be806a8de08a5c9f11b", "tree": "d596c1b9d1add18a41856c1ec5546f90dae8a110", "parents": [ "02ab18b0f497bed623814677577b76cc97234085" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 05:28:17 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:20 2009 -0300" }, "message": "V4L/DVB (12073): gspca_ov519: limit ov6630 qvif uv swap fix to ov66308AF\n\nThe fix for the UV swapping in qcif mode with the ov6630, which I did\nto fix this issue on a ov518 cam with an ov66308AF, causes UV swapping in\nqcif with another cam of mine with the ov518 and an ov66308AE, so this\npatch changes the code to differentiate between the ov66308AF and other\nov6630 versions, and restricts the UV swap fix to the ov66308AF.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "02ab18b0f497bed623814677577b76cc97234085", "tree": "4f110a6b30419cae8077546946cf221cfef5a8cb", "parents": [ "b8bfb5fb348d939a96fc8f71996a2e5e48b4544b" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sun Jun 14 04:32:04 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:16 2009 -0300" }, "message": "V4L/DVB (12072): gspca-ov519: add extra controls\n\nThis patch adds autobrightness (so that it can\nbe turned off to make the already present brightness\ncontrol work) and light frequency filtering controls.\n\nThe lightfreq control needed 2 different entries\nin the ctrls array, as the number of options differs\ndepending on the sensor. Always one of the 2 entires is\ndisabled ofcourse.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b8bfb5fb348d939a96fc8f71996a2e5e48b4544b", "tree": "c9e058777f5f0869166eeadd23a9f0baac037d5c", "parents": [ "14422f9dd8515bfbe6fdbde37eadf59e2980f104" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Sat Jun 13 18:56:22 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:11:07 2009 -0300" }, "message": "V4L/DVB (12071): gspca: fix NULL pointer deref in query_ctrl\n\ngspca: fix NULL pointer deref in query_ctrl\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "14422f9dd8515bfbe6fdbde37eadf59e2980f104", "tree": "1590b5ac41fd4aab91317632d6cb41cd7402e7d8", "parents": [ "d888a4c76c51092993643f8992bf55b3c28da483" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 16 23:55:44 2009 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Jun 23 03:10:05 2009 -0300" }, "message": "V4L/DVB (12010): cx88: Properly support Leadtek TV2000 XP Global\n\nFix Leadtek TV2000 XP Global entries and add missing PCI ID\u0027s.\n\nThanks to Terry Wu \u003cterrywu2009@gmail.com\u003e for pointing us for the proper settings.\n\nCc: Terry Wu \u003cterrywu2009@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "d888a4c76c51092993643f8992bf55b3c28da483", "tree": "62cb91e0668c00cd60b4f48aecfbded960ee79c3", "parents": [ "687d680985b1438360a9ba470ece8b57cd205c3b", "42b86e06c7db365f1947dda9b75317cbb3c9fb5b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:49:16 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:49:16 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)\n Blackfin: fix dma-mapping build errors\n Blackfin: hook up new perf_counter_open syscall\n Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)\n Blackfin: fix early crash when booting on wrong cpu\n Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS\n Blackfin: drop unused ISP1760 port1_disable from board resources\n Blackfin: bf526-ezbrd: handle different SDRAM chips\n Blackfin: fix typo in TRAS define in mem_init.h header\n Blackfin: unify memory map headers\n Blackfin: stick the CPU name into boot image name\n Blackfin: update defconfigs\n Blackfin: decouple unrelated cache settings to get exact behavior\n Blackfin: update I-pipe patch level\n Blackfin: remove obsolete mcount support from I-pipe code\n Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline\n Blackfin: convert interrupt pipeline to irqflags\n Blackfin: allow people to select BF51x-0.1 silicon rev\n Blackfin: bf526-ezbrd: set SPI flash resources to SST device\n Blackfin: fix accidental reset in some boot modes\n Blackfin: abstract irq14 lowering in do_irq\n ...\n" }, { "commit": "687d680985b1438360a9ba470ece8b57cd205c3b", "tree": "ae253608531e5c3e823600974c610e722e7de759", "parents": [ "1053414068bad659479e6efa62a67403b8b1ec0a", "008fe148cb0fb51d266baabe2c09997b21cf90c6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:38:22 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:38:22 2009 -0700" }, "message": "Merge git://git.infradead.org/~dwmw2/iommu-2.6.31\n\n* git://git.infradead.org/~dwmw2/iommu-2.6.31:\n intel-iommu: Fix one last ia64 build problem in Pass Through Support\n VT-d: support the device IOTLB\n VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps\n VT-d: add device IOTLB invalidation support\n VT-d: parse ATSR in DMA Remapping Reporting Structure\n PCI: handle Virtual Function ATS enabling\n PCI: support the ATS capability\n intel-iommu: dmar_set_interrupt return error value\n intel-iommu: Tidy up iommu-\u003egcmd handling\n intel-iommu: Fix tiny theoretical race in write-buffer flush.\n intel-iommu: Clean up handling of \"caching mode\" vs. IOTLB flushing.\n intel-iommu: Clean up handling of \"caching mode\" vs. context flushing.\n VT-d: fix invalid domain id for KVM context flush\n Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support\n Intel IOMMU Pass Through Support\n\nFix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}\n" }, { "commit": "1053414068bad659479e6efa62a67403b8b1ec0a", "tree": "d4096db0f3aa9ca5e6b44c85ab848b7bedbfc37a", "parents": [ "b88f8a546f5dba213938fdfc11e66bc5c2421623", "0c53decdd0a9f9c459ccabe0b5f79660bde5375b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:29:52 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:29:52 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:\n firewire: new stack is no longer experimental\n firewire: net: better FIFO address range check and rcodes\n firewire: net: fix card driver reloading\n firewire: core: fix iso context shutdown on card removal\n firewire: core: fix DMA unmapping in iso buffer removal\n firewire: net: adjust net_device ops\n firewire: net: remove unused code\n firewire: net: allow for unordered unit discovery\n firewire: net: style changes\n firewire: net: add Kconfig item, rename driver\n firewire: add IPv4 support\n" }, { "commit": "b88f8a546f5dba213938fdfc11e66bc5c2421623", "tree": "4048d84046bc47d715651fdd375eabbea065bad6", "parents": [ "0b75b35c7cad33e7613f5adf28fa10fe8b09b1c3" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Mon Jun 22 15:09:14 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:28:25 2009 -0700" }, "message": "NFS: Correct the NFS mount path when following a referral\n\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0b75b35c7cad33e7613f5adf28fa10fe8b09b1c3", "tree": "92b9987a33dc791aed752469ea7aed6e00a63b36", "parents": [ "c02d7adf8c5429727a98bad1d039bccad4c61c50" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Mon Jun 22 15:09:14 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:28:25 2009 -0700" }, "message": "NFS: Fix nfs_path() to always return a \u0027/\u0027 at the beginning of the path\n\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c02d7adf8c5429727a98bad1d039bccad4c61c50", "tree": "10f9a95817f6491426b80f0353eed54964dc1b90", "parents": [ "cf8d2c11cb77f129675478792122f50827e5b0ae" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Mon Jun 22 15:09:14 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:28:25 2009 -0700" }, "message": "NFSv4: Replace nfs4_path_walk() with VFS path lookup in a private namespace\n\nAs noted in the previous patch, the NFSv4 client mount code currently\nhas several limitations. If the mount path contains symlinks, or\nreferrals, or even if it just contains a \u0027..\u0027, then the client code in\nnfs4_path_walk() will fail with an error.\n\nThis patch replaces the nfs4_path_walk()-based lookup with a helper\nfunction that sets up a private namespace to represent the namespace on the\nserver, then uses the ordinary VFS and NFS path lookup code to walk down the\nmount path in that namespace.\n\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "cf8d2c11cb77f129675478792122f50827e5b0ae", "tree": "85bebdff4cffbca238952e839b0cb801e6a9bfe7", "parents": [ "616511d039af402670de8500d0e24495113a9cab" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Mon Jun 22 15:09:13 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:28:25 2009 -0700" }, "message": "VFS: Add VFS helper functions for setting up private namespaces\n\nThe purpose of this patch is to improve the remote mount path lookup\nsupport for distributed filesystems such as the NFSv4 client.\n\nWhen given a mount command of the form \"mount server:/foo/bar /mnt\", the\nNFSv4 client is required to look up the filehandle for \"server:/\", and\nthen look up each component of the remote mount path \"foo/bar\" in order\nto find the directory that is actually going to be mounted on /mnt.\nFollowing that remote mount path may involve following symlinks,\ncrossing server-side mount points and even following referrals to\nfilesystem volumes on other servers.\n\nSince the standard VFS path lookup code already supports walking paths\nthat contain all these features (using in-kernel automounts for\nfollowing referrals) we would like to be able to reuse that rather than\nduplicate the full path traversal functionality in the NFSv4 client code.\n\nThis patch therefore defines a VFS helper function create_mnt_ns(), that\nsets up a temporary filesystem namespace and attaches a root filesystem to\nit. It exports the create_mnt_ns() and put_mnt_ns() function for use by\nfilesystem modules.\n\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "616511d039af402670de8500d0e24495113a9cab", "tree": "825a34ab670dedc463ba7252a177793746c010c7", "parents": [ "31950eb66ff47c946fd9c65c2f8c94b6b7ba13fc" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Mon Jun 22 15:09:13 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:28:25 2009 -0700" }, "message": "VFS: Uninline the function put_mnt_ns()\n\nIn order to allow modules to use it without having to export vfsmount_lock.\n\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "31950eb66ff47c946fd9c65c2f8c94b6b7ba13fc", "tree": "1ab1e09bbe7a0b33bbf19dd725172827bac5bb88", "parents": [ "ac1b7c378ef26fba6694d5f118fe7fc16fee2fe2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:18:12 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 21:18:12 2009 -0700" }, "message": "mm/init: cpu_hotplug_init() must be initialized before SLAB\n\nSLAB uses get/put_online_cpus() which use a mutex which is itself only\ninitialized when cpu_hotplug_init() is called. Currently we hang suring\nboot in SLAB due to doing that too late.\n\nReported by James Bottomley and Sachin Sant (and possibly others).\nDebugged by Benjamin Herrenschmidt.\n\nThis just removes the dynamic initialization of the data structures, and\nreplaces it with a static one, avoiding this dependency entirely, and\nremoving one unnecessary special initcall.\n\nTested-by: Sachin Sant \u003csachinp@in.ibm.com\u003e\nTested-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nTested-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "42b86e06c7db365f1947dda9b75317cbb3c9fb5b", "tree": "8008c203c1e656b657d3ac09fb4a5f70e1e2837a", "parents": [ "5ecf3e03cd513e8dba080d389b56bac11a2b0d8a" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon Jun 22 21:48:37 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 22:31:00 2009 -0400" }, "message": "Blackfin: fix dma-mapping build errors\n\nThe recent deprecation of dma_sync_{sg,single} ironically broke Blackfin\nsystems. This is because we don\u0027t define dma_sync_sg_for_cpu at all, so\nuntil the DMA asm-generic conversion/cleanup is done after the next\nrelease, simply stub out the dma_sync_sg_for_{cpu,device} functions.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "5ecf3e03cd513e8dba080d389b56bac11a2b0d8a", "tree": "22c9553aa21ce1417332fbe8d38df5cccaede916", "parents": [ "986d6c1e05642edac81cb8cc99f36a26d16ef220" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Fri Jun 19 18:56:57 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:47:40 2009 -0400" }, "message": "Blackfin: hook up new perf_counter_open syscall\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "986d6c1e05642edac81cb8cc99f36a26d16ef220", "tree": "36f6b6f2af09a9c97937c198c96178c3e47620be", "parents": [ "bd854c077e660b5f44b5049219645042bcba61ac" ], "author": { "name": "Yi Li", "email": "yi.li@analog.com", "time": "Fri Jun 19 08:51:11 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:19 2009 -0400" }, "message": "Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)\n\nWe don\u0027t support the BF535 at all, and the exception 0x2A text specific to\nit is pretty verbose and confusing (since the behavior is simply odd), so\npunt it to keep the noise down.\n\nSigned-off-by: Yi Li \u003cyi.li@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "bd854c077e660b5f44b5049219645042bcba61ac", "tree": "19f464eecd7d93db5055d10abc182d194849d582", "parents": [ "3aca47c02097a78a566f67e7ec5fa3e0f2583a73" ], "author": { "name": "Robin Getz", "email": "robin.getz@analog.com", "time": "Thu Jun 18 22:53:43 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:17 2009 -0400" }, "message": "Blackfin: fix early crash when booting on wrong cpu\n\nMake sure we process the kernel command line before poking the hardware,\nso that we can process early printk. This helps ensure that if you boot\na kernel configured for a different processor, something will be left in\nthe log buffer.\n\nSigned-off-by: Robin Getz \u003crobin.getz@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "3aca47c02097a78a566f67e7ec5fa3e0f2583a73", "tree": "bec71e369ecb3d22220eb38871bdd1336adadcb4", "parents": [ "3a7f5b1605570f5259e71d1846be27588a00bbaf" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Thu Jun 18 19:40:47 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:15 2009 -0400" }, "message": "Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS\n\nThe GPTMR0_CLOCKSOURCE Kconfig option requires the gptimers framework, so\nmake sure it is selected when this option is enabled.\n\nReported-by: Peter Meerwald \u003cpmeerw@pmeerw.net\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "3a7f5b1605570f5259e71d1846be27588a00bbaf", "tree": "c79ba81c92d701f29e767da116104b498ef0a242", "parents": [ "ee48efb5dc45aeb9786dea6469d3e1bea5105036" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Thu Jun 18 19:13:03 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:13 2009 -0400" }, "message": "Blackfin: drop unused ISP1760 port1_disable from board resources\n\nThe port1 disable stuff was dropped from the USB ISP1760, so update the\nBlackfin boards accordingly.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "ee48efb5dc45aeb9786dea6469d3e1bea5105036", "tree": "0dfab212febc247f6670f89cd79f85ad754273cc", "parents": [ "8f580f7c82ed9edeb3629568aabcde2caff3f236" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Thu Jun 18 04:32:04 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:12 2009 -0400" }, "message": "Blackfin: bf526-ezbrd: handle different SDRAM chips\n\nThe BF526-EZBRD changed SDRAM chips between board revisions, so create a\ntiming table that can accommodate both.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "8f580f7c82ed9edeb3629568aabcde2caff3f236", "tree": "bee9b63a22eb29a36134e87f8de2dd7f3a7d6726", "parents": [ "fa48f84a8cc722ca48b32fa0c338b6c3b358717d" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Thu Jun 18 04:21:39 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:10 2009 -0400" }, "message": "Blackfin: fix typo in TRAS define in mem_init.h header\n\nWe defined SDRAM_tRAS to TRAS_4, but then wrongly defined SDRAM_tRAS_num\nto 3.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "fa48f84a8cc722ca48b32fa0c338b6c3b358717d", "tree": "aa2d2d5f1ec674b2d4c70b506ef9cd0249715e14", "parents": [ "985895bd8d1e41079b41da32cdc57876a4a74126" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Jun 17 11:25:06 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:07 2009 -0400" }, "message": "Blackfin: unify memory map headers\n\nMany aspects of the Blackfin memory map is exactly the same across all\nvariants. Rather than copy and paste all of these duplicated values in\neach header, unify all of these into the common Blackfin memory map header\nfile. In the process, push down BF561 SMP specific stuff to the BF561\nspecific header to keep the noise down.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "985895bd8d1e41079b41da32cdc57876a4a74126", "tree": "954618a726a59f8022f47213ca13e33fab87b893", "parents": [ "841a534367c2cfdc325a11958c51406da17686c7" ], "author": { "name": "Robin Getz", "email": "rgetz@blackfin.uclinux.org", "time": "Wed Jun 17 08:12:54 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:03 2009 -0400" }, "message": "Blackfin: stick the CPU name into boot image name\n\nRather than use \"Linux\" in the boot image name (as this is redundant --\nthe image type is already set to \"linux\"), use the CPU name. This makes\nit fairly obvious when a wrong image is accidentally booted. Otherwise\nthere is no kernel output and you waste time scratching your head\nwondering wtf just happened.\n\nSigned-off-by: Robin Getz \u003crgetz@blackfin.uclinux.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "841a534367c2cfdc325a11958c51406da17686c7", "tree": "fef45de37bb7dbf3cca3ec0ccca6570467468841", "parents": [ "41ba653f24a39a0e6a4afe9b2763a95a57e042c2" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Jun 17 07:11:42 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:16:01 2009 -0400" }, "message": "Blackfin: update defconfigs\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "41ba653f24a39a0e6a4afe9b2763a95a57e042c2", "tree": "43eb086046d4eef764878e04512ddd215ca8845b", "parents": [ "7c039a90f02c3fdcab8d3ca170c05ad37014189e" ], "author": { "name": "Jie Zhang", "email": "jie.zhang@analog.com", "time": "Tue Jun 16 09:48:33 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:59 2009 -0400" }, "message": "Blackfin: decouple unrelated cache settings to get exact behavior\n\nThe current cache options don\u0027t really represent the hardware features.\nThey end up setting different aspects of the hardware so that the end\nresult is to turn on/off the cache. Unfortunately, when we hit cache\nproblems with the hardware, it\u0027s difficult to test different settings to\nroot cause the problem. The current settings also don\u0027t cleanly allow for\ndifferent caching behaviors with different regions of memory.\n\nSo split the configure options such that they properly reflect the settings\nthat are applied to the hardware.\n\nSigned-off-by: Jie Zhang \u003cjie.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "7c039a90f02c3fdcab8d3ca170c05ad37014189e", "tree": "336b21a9d3af5cd98e2bf5c7d13e4020e8c49cb8", "parents": [ "5ba3b249c9e08100b0822f17276348b3447d6ee3" ], "author": { "name": "Philippe Gerum", "email": "rpm@xenomai.org", "time": "Tue Jun 16 05:25:54 2009 +0200" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:58 2009 -0400" }, "message": "Blackfin: update I-pipe patch level\n\nSigned-off-by: Philippe Gerum \u003crpm@xenomai.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "5ba3b249c9e08100b0822f17276348b3447d6ee3", "tree": "f973059af0c05c5644d63a937f8aee89892b1fd8", "parents": [ "a40494a62a11dbaf326397aa94b2018ead09884d" ], "author": { "name": "Philippe Gerum", "email": "rpm@xenomai.org", "time": "Tue Jun 16 05:25:50 2009 +0200" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:56 2009 -0400" }, "message": "Blackfin: remove obsolete mcount support from I-pipe code\n\nSigned-off-by: Philippe Gerum \u003crpm@xenomai.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "a40494a62a11dbaf326397aa94b2018ead09884d", "tree": "2440b4b4b510393ff057761021e9b218a5e1e142", "parents": [ "06ecc190f3928850cb77c498f745fc8e9a7e2fd7" ], "author": { "name": "Philippe Gerum", "email": "rpm@xenomai.org", "time": "Tue Jun 16 05:25:42 2009 +0200" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:54 2009 -0400" }, "message": "Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline\n\nSigned-off-by: Philippe Gerum \u003crpm@xenomai.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "06ecc190f3928850cb77c498f745fc8e9a7e2fd7", "tree": "41d705a007dcc0472bf1555e5163f50d52da9f80", "parents": [ "3d15f302d089d0583463745cbece077c1e8294b1" ], "author": { "name": "Philippe Gerum", "email": "rpm@xenomai.org", "time": "Tue Jun 16 05:25:37 2009 +0200" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:53 2009 -0400" }, "message": "Blackfin: convert interrupt pipeline to irqflags\n\nSigned-off-by: Philippe Gerum \u003crpm@xenomai.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "3d15f302d089d0583463745cbece077c1e8294b1", "tree": "a46263dc4fad4f248fee38ab506fcc989561462c", "parents": [ "dc2c46bb702629d20a3786e10b540c7dcf2c017f" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 15 16:21:44 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:51 2009 -0400" }, "message": "Blackfin: allow people to select BF51x-0.1 silicon rev\n\nNow that 0.1 of the BF51x is coming out, allow people to build for it.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "dc2c46bb702629d20a3786e10b540c7dcf2c017f", "tree": "084ecd522ad7d8a4eac0170b926e3c98206a2cbb", "parents": [ "0de4adfb8c9674fa1572b0ff1371acc94b0be901" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Jun 15 08:23:41 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:49 2009 -0400" }, "message": "Blackfin: bf526-ezbrd: set SPI flash resources to SST device\n\nThe BF526-EZBRD has a SST SPI flash on it, not a ST Micro.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "0de4adfb8c9674fa1572b0ff1371acc94b0be901", "tree": "24ed2b515b7786b7ea29c0696f6f8fcd9a3d46b4", "parents": [ "81b79c213d0200fdd16951a9fb18748fd511d810" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Jun 15 07:39:19 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:48 2009 -0400" }, "message": "Blackfin: fix accidental reset in some boot modes\n\nWe read the SWRST (Software Reset) register to get at the last reset\nstate, and then we may configure the DOUBLE_FAULT bit to control behavior\nwhen a double fault occurs. But if the lower bits of the register is\nalready set (like UART boot mode on a BF54x), we inadvertently make the\nsystem reset by writing to the SYSTEM_RESET field at the same time. So\nmake sure the lower 4 bits are always cleared.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "81b79c213d0200fdd16951a9fb18748fd511d810", "tree": "892c7c5dd8485b31943b16b1c85095fdeb2b2940", "parents": [ "6f10fdabdce356aac3c948e659f39b6f1e2f7382" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 15 06:22:08 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:46 2009 -0400" }, "message": "Blackfin: abstract irq14 lowering in do_irq\n\nSplit out the optional IRQ14 lowering code to further simplify the\nasm_do_IRQ() function and keep the ifdef nest under control.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "6f10fdabdce356aac3c948e659f39b6f1e2f7382", "tree": "ab34b944e187609a2712883bfec6a9d5a5690762", "parents": [ "46f288a0f983401ebadb918751d342cbf819cde5" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 15 06:18:38 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:43 2009 -0400" }, "message": "Blackfin: simplify irq stack overflow checking\n\nTake a page from x86 and abstract the stack checking out of the\nasm_do_IRQ() function so that the result is easier to digest.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "46f288a0f983401ebadb918751d342cbf819cde5", "tree": "6df139ed4b2dda1fcd707e21aef1a8647b233cf3", "parents": [ "26579216f3cdf1ae05f0af8412b444870a167510" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 15 06:13:58 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:42 2009 -0400" }, "message": "Blackfin: only build show_interrupts() when procfs is enabled\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "26579216f3cdf1ae05f0af8412b444870a167510", "tree": "6774806c22c4914430930e522367e9df8c1192af", "parents": [ "a200ad22bb15fe01cf222fa631687876baad5e01" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 15 06:10:03 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:40 2009 -0400" }, "message": "Blackfin: redo handling of bad irqs\n\nWith the common IRQ code initializing much more of the irq_desc state, we\ncan\u0027t blindly initialize it ourselves to the local bad_irq state. If we\ndo, we end up wrongly clobbering many fields. So punt most of the bad irq\ncode as the common layers will handle the default state, and simply call\nhandle_bad_irq() directly when the IRQ we are processing is invalid.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "a200ad22bb15fe01cf222fa631687876baad5e01", "tree": "dd7c7e85a7ea56ff9a694348a68f66bb2d8a7c92", "parents": [ "4d5e6fd42c137dad3b1aced073c6fcb494a8e507" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Sat Jun 13 06:37:14 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:38 2009 -0400" }, "message": "Blackfin: update anomaly lists\n\nUpdate anomaly headers to match latest released anomaly sheets.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "4d5e6fd42c137dad3b1aced073c6fcb494a8e507", "tree": "c5ca664f49cd685abcda3a913fad209ac9c097f7", "parents": [ "2780cd64346782a6116e316c559d70a7655ab6e5" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Sat Jun 13 06:34:49 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:37 2009 -0400" }, "message": "Blackfin: bf533-ezkit: add resources for FISP devices\n\nThe BF533-EZKIT has two Flash In-System Programming devices hooked up to\nthe async memory bus, so add resources for the primary flashes and the\nSRAMs on the devices.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "2780cd64346782a6116e316c559d70a7655ab6e5", "tree": "71f501c688813dbf9998326a829f926e7766bba5", "parents": [ "e56e03b0cfeb997a4be9ad874c193824364942e0" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Thu Jun 11 09:22:02 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:36 2009 -0400" }, "message": "Blackfin: bf518f-ezbrd: update DSA resources\n\nThe common DSA code changed structure layout, so update the BF518F-EZBRD\nresources accordingly.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "e56e03b0cfeb997a4be9ad874c193824364942e0", "tree": "5a49f9a42d1577c13ee59d016bd0630c60de58d1", "parents": [ "ac1b7c378ef26fba6694d5f118fe7fc16fee2fe2" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Sun Jun 07 16:31:52 2009 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 22 21:15:34 2009 -0400" }, "message": "Blackfin: unify memory region checks between kgdb and traps\n\nThe kgdb (in multiple places) and traps code developed pretty much\nidentical checks for how to access different regions of the Blackfin\nmemory map, but each wasn\u0027t 100%, so unify them to avoid duplication,\nbitrot, and bugs with edge cases.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "ac1b7c378ef26fba6694d5f118fe7fc16fee2fe2", "tree": "3f72979545bb070eb2c3e903cbf31dc4aef3ffc9", "parents": [ "9e268beb92ee3a853b3946e84b10358207e2085f", "c90173f0907486fe4010c2a8cef534e2473db43f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 16:56:22 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 16:56:22 2009 -0700" }, "message": "Merge git://git.infradead.org/mtd-2.6\n\n* git://git.infradead.org/mtd-2.6: (63 commits)\n mtd: OneNAND: Allow setting of boundary information when built as module\n jffs2: leaking jffs2_summary in function jffs2_scan_medium\n mtd: nand: Fix memory leak on txx9ndfmc probe failure.\n mtd: orion_nand: use burst reads with double word accesses\n mtd/nand: s3c6400 support for s3c2410 driver\n [MTD] [NAND] S3C2410: Use DIV_ROUND_UP\n [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write\n [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND\n [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set\n mtd: physmap_of: Add multiple regions and concatenation support\n mtd: nand: max_retries off by one in mxc_nand\n mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440\n mtd: onenand: add bbt_wait \u0026 unlock_all as replaceable for some platform\n mtd: Flex-OneNAND support\n mtd: nand: add OMAP2/OMAP3 NAND driver\n mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs\n mtd: uclinux: mark local stuff static\n mtd: uclinux: do not allow to be built as a module\n mtd: uclinux: allow systems to override map addr/size\n mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs\n ...\n" }, { "commit": "9e268beb92ee3a853b3946e84b10358207e2085f", "tree": "dec36344c8b16d53e56763aa174dd7ea806b653f", "parents": [ "2e8b5a09ebf1f98f02c1988a48415e89d4c25168", "9ccdac3662dbf3c75e8f8851a214bdf7d365a4bd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 14:56:13 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 14:56:13 2009 -0700" }, "message": "Merge branch \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits)\n [ARM] idle: clean up pm_idle calling, obey hlt_counter\n [ARM] S3C: Fix gpio-config off-by-one bug\n [ARM] S3C64XX: add to_irq() support for EINT() GPIO\n [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit\n [ARM] S3C64XX: fix HCLK gate defines\n [ARM] Update mach-types\n [ARM] wire up rt_tgsigqueueinfo and perf_counter_open\n OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons\n OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL\n OMAP3: Add support for DPLL3 divisor values higher than 2\n OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers\n OMAP3 SRAM: add more comments on the SRAM code\n OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change\n OMAP3 clock: add a short delay when lowering CORE clk rate\n OMAP3 clock: initialize SDRC timings at kernel start\n OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize\n [ARM] Add old Feroceon support to compressed/head.S\n [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit\n [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks\n [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU\n ...\n" }, { "commit": "9ccdac3662dbf3c75e8f8851a214bdf7d365a4bd", "tree": "0a6c340482add9fd5ac629d2441b0d0027c82760", "parents": [ "915166d96f5cab90b6f39f37da1139e5eab516b2" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Jun 22 22:34:55 2009 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Jun 22 22:34:55 2009 +0100" }, "message": "[ARM] idle: clean up pm_idle calling, obey hlt_counter\n\npm_idle is used by infrastructure (eg, cpuidle) which expects architectures\nto call it in a certain way. Arrange for ARM to follow x86\u0027s lead on this\nand call pm_idle() with interrupts already disabled. However, we expect\npm_idle() to enable interrupts before it returns.\n\nAlso, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to\nprevent all calls to pm_idle.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "2e8b5a09ebf1f98f02c1988a48415e89d4c25168", "tree": "e2affc58f82f20012d507f1ee257720451b779c5", "parents": [ "eadfe21989d728b5af936487627b4e288bd805f8" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Mon Jun 22 15:32:36 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 13:34:50 2009 -0700" }, "message": "MN10300: Fix the vmlinux ldscript\n\nFix the MN10300 vmlinux ldscript. It needs to use various macros from\nasm-generic/vmlinux.lds.h to correctly include all that it needs to.\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "eadfe21989d728b5af936487627b4e288bd805f8", "tree": "bc1b7a09c6bf1e231654cb86ff64e46b9d9cbbfa", "parents": [ "7e0338c0de18c50f09aea1fbef45110cf7d64a3c" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Mon Jun 22 15:32:31 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 13:34:49 2009 -0700" }, "message": "LDSCRIPT: Name INIT_RAM_FS consistently\n\nIn asm-generic/vmlinux.lds.h, name INIT_RAM_FS consistently, no matter the\nsetting of CONFIG_BLK_DEV_INITRD. This corrects:\n\n\tcommit ef53dae8658cf0e93d380983824a661067948d87\n\tAuthor: Sam Ravnborg \u003csam@ravnborg.org\u003e\n\tDate: Sun Jun 7 20:46:37 2009 +0200\n\tSubject: Improve vmlinux.lds.h support for arch specific linker scripts\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nAcked-by: Sam Ravnborg \u003csam@ravnborg.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7e0338c0de18c50f09aea1fbef45110cf7d64a3c", "tree": "30a935c1f6eee7125a9fbb802a33292b1f7268fa", "parents": [ "df36b439c5fedefe013d4449cb6a50d15e2f4d70", "47fcb03fefee2501e79176932a4184fc24d6f8ec" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:55:50 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:55:50 2009 -0700" }, "message": "Merge branch \u0027for-2.6.31\u0027 of git://fieldses.org/git/linux-nfsd\n\n* \u0027for-2.6.31\u0027 of git://fieldses.org/git/linux-nfsd: (60 commits)\n SUNRPC: Fix the TCP server\u0027s send buffer accounting\n nfsd41: Backchannel: minorversion support for the back channel\n nfsd41: Backchannel: cleanup nfs4.0 callback encode routines\n nfsd41: Remove ip address collision detection case\n nfsd: optimise the starting of zero threads when none are running.\n nfsd: don\u0027t take nfsd_mutex twice when setting number of threads.\n nfsd41: sanity check client drc maxreqs\n nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct\n NFS: kill off complicated macro \u0027PROC\u0027\n sunrpc: potential memory leak in function rdma_read_xdr\n nfsd: minor nfsd_vfs_write cleanup\n nfsd: Pull write-gathering code out of nfsd_vfs_write\n nfsd: track last inode only in use_wgather case\n sunrpc: align cache_clean work\u0027s timer\n nfsd: Use write gathering only with NFSv2\n NFSv4: kill off complicated macro \u0027PROC\u0027\n NFSv4: do exact check about attribute specified\n knfsd: remove unreported filehandle stats counters\n knfsd: fix reply cache memory corruption\n knfsd: reply cache cleanups\n ...\n" }, { "commit": "df36b439c5fedefe013d4449cb6a50d15e2f4d70", "tree": "537c58db778cbf11b74e28091f89d1b8139fb84d", "parents": [ "a9b011f5ac57cbaedb32a8149f3d39d7b2c1f0e0", "e9f029855865e917821ef6034b31e340a4cfc815" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:53:06 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:53:06 2009 -0700" }, "message": "Merge branch \u0027for-2.6.31\u0027 of git://git.linux-nfs.org/projects/trondmy/nfs-2.6\n\n* \u0027for-2.6.31\u0027 of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (128 commits)\n nfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh()\n nfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res\n nfs: remove unnecessary NFS_INO_INVALID_ACL checks\n NFS: More \"sloppy\" parsing problems\n NFS: Invalid mount option values should always fail, even with \"sloppy\"\n NFS: Remove unused XDR decoder functions\n NFS: Update MNT and MNT3 reply decoding functions\n NFS: add XDR decoder for mountd version 3 auth-flavor lists\n NFS: add new file handle decoders to in-kernel mountd client\n NFS: Add separate mountd status code decoders for each mountd version\n NFS: remove unused function in fs/nfs/mount_clnt.c\n NFS: Use xdr_stream-based XDR encoder for MNT\u0027s dirpath argument\n NFS: Clean up MNT program definitions\n lockd: Don\u0027t bother with RPC ping for NSM upcalls\n lockd: Update NSM state from SM_MON replies\n NFS: Fix false error return from nfs_callback_up() if ipv6.ko is not available\n NFS: Return error code from nfs_callback_up() to user space\n NFS: Do not display the setting of the \"intr\" mount option\n NFS: add support for splice writes\n nfs41: Backchannel: CB_SEQUENCE validation\n ...\n" }, { "commit": "a9b011f5ac57cbaedb32a8149f3d39d7b2c1f0e0", "tree": "89c850cc9e2ed949f5fc3b99180cd6cb70db6160", "parents": [ "b5bdd43876e475724c662f99206f0349c67e33e6", "da6330fccc251db73945ee3eb6248985cf2574de" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:51:28 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:51:28 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6\n\n* \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits)\n [S390] Update default configuration.\n [S390] kprobes: defer setting of ctlblk state\n [S390] Enable tick based perf_counter on s390.\n [S390] dasd: fix refcounting in dasd_change_state\n [S390] lockless idle time accounting\n [S390] driver_data access\n [S390] pm: fix build error for !SMP\n [S390] dasd_pm: fix stop flag handling\n [S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt\n [S390] qdio: Sanitize do_QDIO sanity checks\n [S390] qdio: leave inbound SBALs primed\n [S390] qdio: merge AI tasklet into interrupt handler\n [S390] qdio: extract all primed SBALs at once\n [S390] qdio: fix check for running under z/VM\n [S390] qdio: move adapter interrupt tasklet code\n [S390] Use del_timer instead of del_timer_sync\n [S390] s390: remove DEBUG_MALLOC\n [S390] vt220 console: convert from bootmem to slab\n [S390] sclp console: convert from bootmem to slab\n [S390] 3270 console: convert from bootmem to slab\n ...\n" }, { "commit": "b5bdd43876e475724c662f99206f0349c67e33e6", "tree": "fc20fe0744428c3871076967b0a57c8cc3f023f3", "parents": [ "f39cf0b783b3f402ddf1eb6a09234b5bfe34bb2a", "dc1972d02747d2170fb1d78d114801f5ecb27506" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:44:14 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:44:14 2009 -0700" }, "message": "Merge branch \u0027next-i2c\u0027 of git://aeryn.fluff.org.uk/bjdooks/linux\n\n* \u0027next-i2c\u0027 of git://aeryn.fluff.org.uk/bjdooks/linux:\n i2c: Fix stuck transaction on cpm-i2c driver\n i2c-omap: Fix build breaking typo cpu_is_omap_2430\n" }, { "commit": "f39cf0b783b3f402ddf1eb6a09234b5bfe34bb2a", "tree": "6ac105287f433be5be65b14f1246a23e368c3ae2", "parents": [ "59ef7a83f1127038a433464597df02e2dc9540e7", "aafd1255d08fb26cab87d1b28ff35a15bdb2ed68" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:38:31 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 12:38:31 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:\n xtensa: enable m41t80 driver in s6105_defconfig\n xtensa: add m41t62 rtc to s6105 platform\n xtensa: enable s6gmac in s6105_defconfig\n xtensa: s6105 specific configuration for s6gmac\n s6gmac: xtensa s6000 on-chip ethernet driver\n xtensa: support s6000 gpio irqs and alternate function selection\n xtensa: s6000 dma engine support\n xtensa: allow variant to initialize own irq chips\n xtensa: cache inquiry and unaligned cache handling functions\n" }, { "commit": "59ef7a83f1127038a433464597df02e2dc9540e7", "tree": "725d262fc2e68eb9c592d76265f878cec73f8f2d", "parents": [ "5165aece0efac6574fc3e32b6f1c2a964820d1c6", "2af5066f664cb011cf17d2e4414491fe24597e07" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:59:51 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:59:51 2009 -0700" }, "message": "Merge branch \u0027linux-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6\n\n* \u0027linux-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)\n PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write\n PCI: Fix the NIU MSI-X problem in a better way\n PCI ASPM: remove get_root_port_link\n PCI ASPM: cleanup pcie_aspm_sanity_check\n PCI ASPM: remove has_switch field\n PCI ASPM: cleanup calc_Lx_latency\n PCI ASPM: cleanup pcie_aspm_get_cap_device\n PCI ASPM: cleanup clkpm checks\n PCI ASPM: cleanup __pcie_aspm_check_state_one\n PCI ASPM: cleanup initialization\n PCI ASPM: cleanup change input argument of aspm functions\n PCI ASPM: cleanup misc in struct pcie_link_state\n PCI ASPM: cleanup clkpm state in struct pcie_link_state\n PCI ASPM: cleanup latency field in struct pcie_link_state\n PCI ASPM: cleanup aspm state field in struct pcie_link_state\n PCI ASPM: fix typo in struct pcie_link_state\n PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS\n PCI: remove redundant __msi_set_enable()\n PCI PM: consistently use type bool for wake enable variable\n x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded\n ...\n" }, { "commit": "5165aece0efac6574fc3e32b6f1c2a964820d1c6", "tree": "73131c06a021578a47526a95bad391dbd9d3b932", "parents": [ "e38be994b9cad09b0d8d78a1875d7e8a2e115d29", "f6b24caaf933a466397915a08e30e885a32f905a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:57:09 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:57:09 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits)\n via-velocity: Fix velocity driver unmapping incorrect size.\n mlx4_en: Remove redundant refill code on RX\n mlx4_en: Removed redundant check on lso header size\n mlx4_en: Cancel port_up check in transmit function\n mlx4_en: using stop/start_all_queues\n mlx4_en: Removed redundant skb-\u003elen check\n mlx4_en: Counting all the dropped packets on the TX side\n usbnet cdc_subset: fix issues talking to PXA gadgets\n Net: qla3xxx, remove sleeping in atomic\n ipv4: fix NULL pointer + success return in route lookup path\n isdn: clean up documentation index\n cfg80211: validate station settings\n cfg80211: allow setting station parameters in mesh\n cfg80211: allow adding/deleting stations on mesh\n ath5k: fix beacon_int handling\n MAINTAINERS: Fix Atheros pattern paths\n ath9k: restore PS mode, before we put the chip into FULL SLEEP state.\n ath9k: wait for beacon frame along with CAB\n acer-wmi: fix rfkill conversion\n ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling\n ...\n" }, { "commit": "e38be994b9cad09b0d8d78a1875d7e8a2e115d29", "tree": "5f2e4ab8585c9a5d70cbe50abf7345d989cbb57c", "parents": [ "44da59e4006fbf7c4cc9b54485a37a40726091ee" ], "author": { "name": "Hitoshi Mitake", "email": "mitake@dcl.info.waseda.ac.jp", "time": "Mon Jun 22 11:11:20 2009 +0900" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:34:42 2009 -0700" }, "message": "Making fs/minix/minix.h double including safe\n\nI happened to find that fs/minix/minix.h doesn\u0027t guard double include.\n\nYes, I know this never cause something destructive because this is\nself-evidence that no source file includes minix.h twice, but I think\nfixing this is better than disregarding it.\n\nSigned-off-by: Hitoshi Mitake \u003cmitake@dcl.info.waseda.ac.jp\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "44da59e4006fbf7c4cc9b54485a37a40726091ee", "tree": "3e41c60317295bbe7bf29f8c2a65a93aeb76808f", "parents": [ "04896a77a97b87e1611dedd61be88264ef4ac96c" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Mon Jun 22 18:43:18 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:25 2009 -0700" }, "message": "msm: fixups to match current code\n\nThe tty layer is now a bit more fussy about reporting the right baud rate\nback. Make the msm driver match the current state of affairs.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "04896a77a97b87e1611dedd61be88264ef4ac96c", "tree": "a4c615f0aa022363dbf3efe50a1bd9de91a65c04", "parents": [ "2421c48bd74debb537de94c1bd15cbabab272aa1" ], "author": { "name": "Robert Love", "email": "rlove@google.com", "time": "Mon Jun 22 18:43:11 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:25 2009 -0700" }, "message": "msm_serial: serial driver for MSM7K onboard serial peripheral.\n\nSigned-off-by: Brian Swetland \u003cswetland@google.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2421c48bd74debb537de94c1bd15cbabab272aa1", "tree": "8e98a6011203769e3aa574f5b7e262a3ac54de32", "parents": [ "be10eb7589337e5defbe214dae038a53dd21add8" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors.ext@mocean-labs.com", "time": "Mon Jun 22 18:43:03 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:25 2009 -0700" }, "message": "timbuart: Fix for tx_empty\n\nHardware updated to support TX FIFO empty.\n\nSigned-off-by: Richard Röjfors \u003crichard.rojfors.ext@mocean-labs.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "be10eb7589337e5defbe214dae038a53dd21add8", "tree": "2b1d131baa30260531b51c3288d3cfef7deaf7ed", "parents": [ "90ceb9644d7cdec00a90255473359a7e2bb537a9" ], "author": { "name": "Paul Fulghum", "email": "paulkf@microgate.com", "time": "Mon Jun 22 18:42:56 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "tty: n_hdlc add buffer flushing\n\nAdd flush_buffer tty callback to flush rx buffers.\nAdd TCFLSH ioctl processing to flush tx buffers.\nIncrease default tx buffers from 1 to 3.\nRemove unneeded flush_buffer call in open callback.\nRemove vendor specific CVS version string.\n\nSigned-off-by: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "90ceb9644d7cdec00a90255473359a7e2bb537a9", "tree": "ac1539fb98f5efd2a7ba18515bb53f9eb86d2b2e", "parents": [ "099d5270897606473d63091afcc63f53ee1894bc" ], "author": { "name": "Peter Korsgaard", "email": "jacmet@sunsite.dk", "time": "Mon Jun 22 18:42:49 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "serial: samsung.c: mark s3c24xx_serial_remove as __devexit\n\nMark the remove function as __devexit so it gets eliminated in\nCONFIG_HOTPLUG\u003dn builds. Saves ~100 bytes.\n\nSigned-off-by: Peter Korsgaard \u003cjacmet@sunsite.dk\u003e\nAcked-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "099d5270897606473d63091afcc63f53ee1894bc", "tree": "4381c82550484101567e07b385989e3510fa73ab", "parents": [ "94362fd7fbad653c9517efa4aa7cd8fdadd527b1" ], "author": { "name": "Kevin Hilman", "email": "khilman@deeprootsystems.com", "time": "Mon Jun 22 18:42:42 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "serial@ add OMAP wakeup-enable register\n\nAdd the wakeup enable register to the list of OMAP-specific UART\nregisters. This is to support forthcoming OMAP PM enhancements which\nuse the wakeup feature of the OMAP\u0027s 8250-based UART.\n\nSigned-off-by: Kevin Hilman \u003ckhilman@deeprootsystems.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "94362fd7fbad653c9517efa4aa7cd8fdadd527b1", "tree": "692b587977908bc2c92a10268333cd5f264f610c", "parents": [ "a6540f731d506d9e82444cf0020e716613d4c46c" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Mon Jun 22 18:42:36 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "tty: fix some bogns in the serqt_usb2 driver\n\nRemove the replicated urban legends from the comments and fix a couple of\nother silly calls\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a6540f731d506d9e82444cf0020e716613d4c46c", "tree": "07482a4a9da12f754231598371d0bf5e1f691c66", "parents": [ "a115902f67ef51fbbe83e214fb761aaa9734c1ce" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Mon Jun 22 18:42:29 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "ppp: Fix throttling bugs\n\nThe ppp layer goes around calling the unthrottle method from non sleeping\npaths. This isn\u0027t safe because the unthrottle methods in the tty layer need\nto be able to sleep (consider a USB dongle).\n\nUntil now this didn\u0027t show up because the ppp layer never actually throttled\na port so the unthrottle was always a no-op. Currently it\u0027s a mutex taking\npath so warnings are spewed if the unthrottle occurs via certain paths.\n\nFix this by removing the unneccessary unthrottle calls.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a115902f67ef51fbbe83e214fb761aaa9734c1ce", "tree": "a12a81468795e40fe0012331cc4e95d13f5177e0", "parents": [ "69ae59d7d8df14413cf0a97b3e372d7dc8352563" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon Jun 22 18:42:18 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "vt_ioctl: fix lock imbalance\n\nDon\u0027t return from switch/case directly in vt_ioctl. Set ret and break\ninstead so that we unlock BKL.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "69ae59d7d8df14413cf0a97b3e372d7dc8352563", "tree": "c09d6e756a95346ab20edfbea71420a3522aed83", "parents": [ "eca41044268887838fa122aa24475df8f23d614c" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon Jun 22 18:42:10 2009 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jun 22 11:32:24 2009 -0700" }, "message": "pcmcia/cm4000: fix lock imbalance\n\nDon\u0027t return from switch/case, break instead, so that we unlock BKL.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "eca41044268887838fa122aa24475df8f23d614c" }