OMAPFB: use dma_alloc_attrs to allocate memory
Use dma_alloc_attrs to allocate memory instead of omap specific vram
allocator. After this we can remove the omap vram allocator.
There are some downsides to this change:
1) dma_alloc_attrs doesn't let us allocate at certain physical address.
However, this should not be a problem as this feature of vram allocator
is only used when reserving the framebuffer that was initialized by the
bootloader, and we don't currently support "passing" a framebuffer from
the bootloader to the kernel anyway.
2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and
we don't need the ioremap when using VRFB. This patch uses
DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently
not operational.
3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I
changed the ioctl to return 64M for all the values, which, I hope, the
applications will interpret as "there's enough vram".
4) "vram" kernel parameter to define how much ram to reserve for video
use no longer works. The user needs to enable CMA and use "cma"
parameter.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
index a564cee..4484e02 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/OMAP/DSS
@@ -285,7 +285,10 @@
Misc notes
----------
-OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
@@ -301,11 +304,6 @@
Kernel boot arguments
---------------------
-vram=<size>[,<physaddr>]
- - Amount of total VRAM to preallocate and optionally a physical start
- memory address. For example, "10M". omapfb allocates memory for
- framebuffers from VRAM.
-
omapfb.mode=<display>:<mode>[,...]
- Default video mode for specified displays. For example,
"dvi:800x400MR-24@60". See drivers/video/modedb.c.
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
index 4ea17dc..4cb12ce 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -2,7 +2,6 @@
tristate "OMAP2+ frame buffer support"
depends on FB && OMAP2_DSS && !DRM_OMAP
- select OMAP2_VRAM
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 606b89f..574c170 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -31,7 +31,6 @@
#include <video/omapdss.h>
#include <plat/vrfb.h>
-#include <plat/vram.h>
#include "omapfb.h"
@@ -853,14 +852,15 @@
break;
case OMAPFB_GET_VRAM_INFO: {
- unsigned long vram, free, largest;
-
DBG("ioctl GET_VRAM_INFO\n");
- omap_vram_get_info(&vram, &free, &largest);
- p.vram_info.total = vram;
- p.vram_info.free = free;
- p.vram_info.largest_free_block = largest;
+ /*
+ * We don't have the ability to get this vram info anymore.
+ * Fill in something that should keep the applications working.
+ */
+ p.vram_info.total = SZ_1M * 64;
+ p.vram_info.free = SZ_1M * 64;
+ p.vram_info.largest_free_block = SZ_1M * 64;
if (copy_to_user((void __user *)arg, &p.vram_info,
sizeof(p.vram_info)))
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 16db158..84c1012 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -32,7 +32,6 @@
#include <video/omapdss.h>
#include <plat/cpu.h>
-#include <plat/vram.h>
#include <plat/vrfb.h>
#include "omapfb.h"
@@ -1336,24 +1335,25 @@
rg = ofbi->region;
+ if (rg->token == NULL)
+ return;
+
WARN_ON(atomic_read(&rg->map_count));
- if (rg->paddr)
- if (omap_vram_free(rg->paddr, rg->size))
- dev_err(fbdev->dev, "VRAM FREE failed\n");
-
- if (rg->vaddr)
- iounmap(rg->vaddr);
-
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
/* unmap the 0 angle rotation */
if (rg->vrfb.vaddr[0]) {
iounmap(rg->vrfb.vaddr[0]);
- omap_vrfb_release_ctx(&rg->vrfb);
rg->vrfb.vaddr[0] = NULL;
}
+
+ omap_vrfb_release_ctx(&rg->vrfb);
}
+ dma_free_attrs(fbdev->dev, rg->size, rg->token, rg->dma_handle,
+ &rg->attrs);
+
+ rg->token = NULL;
rg->vaddr = NULL;
rg->paddr = 0;
rg->alloc = 0;
@@ -1388,7 +1388,9 @@
struct omapfb_info *ofbi = FB2OFB(fbi);
struct omapfb2_device *fbdev = ofbi->fbdev;
struct omapfb2_mem_region *rg;
- void __iomem *vaddr;
+ void *token;
+ DEFINE_DMA_ATTRS(attrs);
+ dma_addr_t dma_handle;
int r;
rg = ofbi->region;
@@ -1403,42 +1405,43 @@
size = PAGE_ALIGN(size);
- if (!paddr) {
- DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
- r = omap_vram_alloc(size, &paddr);
- } else {
- DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
- ofbi->id);
- r = omap_vram_reserve(paddr, size);
- }
+ WARN_ONCE(paddr,
+ "reserving memory at predefined address not supported\n");
- if (r) {
+ dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
+
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ dma_set_attr(DMA_ATTR_NO_KERNEL_MAPPING, &attrs);
+
+ DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
+
+ token = dma_alloc_attrs(fbdev->dev, size, &dma_handle,
+ GFP_KERNEL, &attrs);
+
+ if (token == NULL) {
dev_err(fbdev->dev, "failed to allocate framebuffer\n");
return -ENOMEM;
}
- if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) {
- vaddr = ioremap_wc(paddr, size);
+ DBG("allocated VRAM paddr %lx, vaddr %p\n",
+ (unsigned long)dma_handle, token);
- if (!vaddr) {
- dev_err(fbdev->dev, "failed to ioremap framebuffer\n");
- omap_vram_free(paddr, size);
- return -ENOMEM;
- }
-
- DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
- } else {
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
r = omap_vrfb_request_ctx(&rg->vrfb);
if (r) {
+ dma_free_attrs(fbdev->dev, size, token, dma_handle,
+ &attrs);
dev_err(fbdev->dev, "vrfb create ctx failed\n");
return r;
}
-
- vaddr = NULL;
}
- rg->paddr = paddr;
- rg->vaddr = vaddr;
+ rg->attrs = attrs;
+ rg->token = token;
+ rg->dma_handle = dma_handle;
+
+ rg->paddr = (unsigned long)dma_handle;
+ rg->vaddr = (void __iomem *)token;
rg->size = size;
rg->alloc = 1;
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index 5ced9b3..5f72bf9 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -28,6 +28,8 @@
#endif
#include <linux/rwsem.h>
+#include <linux/dma-attrs.h>
+#include <linux/dma-mapping.h>
#include <video/omapdss.h>
@@ -49,6 +51,9 @@
struct omapfb2_mem_region {
int id;
+ struct dma_attrs attrs;
+ void *token;
+ dma_addr_t dma_handle;
u32 paddr;
void __iomem *vaddr;
struct vrfb vrfb;