ARM: at91: switch Fox G20 board .dts to pre-processor defines
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f5e0427..cbe9673 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -8,7 +8,7 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
/ {
model = "Acme Systems FoxG20";
@@ -36,7 +36,7 @@
ahb {
apb {
usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 6 0>;
+ atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -95,22 +95,22 @@
board {
pinctrl_pck0_as_mck: pck0_as_mck {
atmel,pins =
- <2 1 0x2 0x0>; /* PC1 periph B */
+ <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
mmc0_slot1 {
pinctrl_board_mmc0_slot1: mmc0_slot1-board {
atmel,pins =
- <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */
};
};
i2c0 {
pinctrl_i2c0: i2c0-0 {
atmel,pins =
- <0 23 0x1 0x2 /* TWD (SDA) PA23 periph A, open drain */
- 0 24 0x1 0x2>; /* TWCK (SCL) PA24 periph A, open drain */
+ <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */
+ AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */
};
};
};
@@ -139,7 +139,7 @@
/* red LED marked "PC7" near mini USB (device) receptacle */
user_led {
label = "user_led";
- gpios = <&pioC 7 0>; /* PC7 */
+ gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */
linux,default-trigger = "heartbeat";
};
};
@@ -149,7 +149,7 @@
btn {
label = "Button";
- gpios = <&pioC 4 1>;
+ gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
gpio-key,wakeup;
};