V4L/DVB (5955): Add support for DiB7070-based devices
This changeset adds support for DiB7070P-based devices by adding the
dib0070-driver and putting the appropriate layouts into
dib0700_devices.c
It also includes a new firmware for the dib0700 which is necessary to
make the DiB7070-boards work and it also should fix the i2c-problems
on some boards.
Signed-off-by: Jean-Philippe Sibers <jpsibers@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
new file mode 100644
index 0000000..786e37d
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -0,0 +1,44 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+#ifndef DIB0070_H
+#define DIB0070_H
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+#define DEFAULT_DIB0070_I2C_ADDRESS 0x60
+
+struct dib0070_config {
+ u8 i2c_address;
+
+ /* tuner pins controlled externally */
+ int (*reset) (struct dvb_frontend *, int);
+ int (*sleep) (struct dvb_frontend *, int);
+
+ /* offset in kHz */
+ int freq_offset_khz_uhf;
+ int freq_offset_khz_vhf;
+
+ u8 osc_buffer_state; /* 0= normal, 1= tri-state */
+ u32 clock_khz;
+ u8 clock_pad_drive; /* (Drive + 1) * 2mA */
+
+ u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
+
+ u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
+
+ u8 flip_chip;
+};
+
+extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
+extern u16 dib0070_wbd_offset(struct dvb_frontend *);
+
+#endif