|  | /* | 
|  | * linux/arch/arm/mach-sa1100/collie.c | 
|  | * | 
|  | * May be copied or modified under the terms of the GNU General Public | 
|  | * License.  See linux/COPYING for more information. | 
|  | * | 
|  | * This file contains all Collie-specific tweaks. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * ChangeLog: | 
|  | *  2006 Pavel Machek <pavel@ucw.cz> | 
|  | *  03-06-2004 John Lenz <lenz@cs.wisc.edu> | 
|  | *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net> | 
|  | *  04-16-2001 Lineo Japan,Inc. ... | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/pda_power.h> | 
|  | #include <linux/mfd/ucb1x00.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/setup.h> | 
|  | #include <mach/collie.h> | 
|  |  | 
|  | #include <asm/mach/arch.h> | 
|  | #include <asm/mach/flash.h> | 
|  | #include <asm/mach/map.h> | 
|  | #include <asm/mach/serial_sa1100.h> | 
|  |  | 
|  | #include <asm/hardware/scoop.h> | 
|  | #include <asm/mach/sharpsl_param.h> | 
|  | #include <asm/hardware/locomo.h> | 
|  | #include <mach/mcp.h> | 
|  |  | 
|  | #include "generic.h" | 
|  |  | 
|  | static struct resource collie_scoop_resources[] = { | 
|  | [0] = { | 
|  | .start		= 0x40800000, | 
|  | .end		= 0x40800fff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct scoop_config collie_scoop_setup = { | 
|  | .io_dir 	= COLLIE_SCOOP_IO_DIR, | 
|  | .io_out		= COLLIE_SCOOP_IO_OUT, | 
|  | .gpio_base	= COLLIE_SCOOP_GPIO_BASE, | 
|  | }; | 
|  |  | 
|  | struct platform_device colliescoop_device = { | 
|  | .name		= "sharp-scoop", | 
|  | .id		= -1, | 
|  | .dev		= { | 
|  | .platform_data	= &collie_scoop_setup, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(collie_scoop_resources), | 
|  | .resource	= collie_scoop_resources, | 
|  | }; | 
|  |  | 
|  | static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = { | 
|  | { | 
|  | .dev		= &colliescoop_device.dev, | 
|  | .irq		= COLLIE_IRQ_GPIO_CF_IRQ, | 
|  | .cd_irq		= COLLIE_IRQ_GPIO_CF_CD, | 
|  | .cd_irq_str	= "PCMCIA0 CD", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct scoop_pcmcia_config collie_pcmcia_config = { | 
|  | .devs		= &collie_pcmcia_scoop[0], | 
|  | .num_devs	= 1, | 
|  | }; | 
|  |  | 
|  | static struct ucb1x00_plat_data collie_ucb1x00_data = { | 
|  | .gpio_base	= COLLIE_TC35143_GPIO_BASE, | 
|  | }; | 
|  |  | 
|  | static struct mcp_plat_data collie_mcp_data = { | 
|  | .mccr0		= MCCR0_ADM | MCCR0_ExtClk, | 
|  | .sclk_rate	= 9216000, | 
|  | .codec		= "ucb1x00", | 
|  | .codec_pdata	= &collie_ucb1x00_data, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Collie AC IN | 
|  | */ | 
|  | static int collie_power_init(struct device *dev) | 
|  | { | 
|  | int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in"); | 
|  | if (ret) | 
|  | goto err_gpio_req; | 
|  |  | 
|  | ret = gpio_direction_input(COLLIE_GPIO_AC_IN); | 
|  | if (ret) | 
|  | goto err_gpio_in; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_gpio_in: | 
|  | gpio_free(COLLIE_GPIO_AC_IN); | 
|  | err_gpio_req: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void collie_power_exit(struct device *dev) | 
|  | { | 
|  | gpio_free(COLLIE_GPIO_AC_IN); | 
|  | } | 
|  |  | 
|  | static int collie_power_ac_online(void) | 
|  | { | 
|  | return gpio_get_value(COLLIE_GPIO_AC_IN) == 2; | 
|  | } | 
|  |  | 
|  | static char *collie_ac_supplied_to[] = { | 
|  | "main-battery", | 
|  | "backup-battery", | 
|  | }; | 
|  |  | 
|  | static struct pda_power_pdata collie_power_data = { | 
|  | .init			= collie_power_init, | 
|  | .is_ac_online		= collie_power_ac_online, | 
|  | .exit			= collie_power_exit, | 
|  | .supplied_to		= collie_ac_supplied_to, | 
|  | .num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to), | 
|  | }; | 
|  |  | 
|  | static struct resource collie_power_resource[] = { | 
|  | { | 
|  | .name		= "ac", | 
|  | .start		= gpio_to_irq(COLLIE_GPIO_AC_IN), | 
|  | .end		= gpio_to_irq(COLLIE_GPIO_AC_IN), | 
|  | .flags		= IORESOURCE_IRQ | | 
|  | IORESOURCE_IRQ_HIGHEDGE | | 
|  | IORESOURCE_IRQ_LOWEDGE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device collie_power_device = { | 
|  | .name			= "pda-power", | 
|  | .id			= -1, | 
|  | .dev.platform_data	= &collie_power_data, | 
|  | .resource		= collie_power_resource, | 
|  | .num_resources		= ARRAY_SIZE(collie_power_resource), | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_SHARP_LOCOMO | 
|  | /* | 
|  | * low-level UART features. | 
|  | */ | 
|  | struct platform_device collie_locomo_device; | 
|  |  | 
|  | static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) | 
|  | { | 
|  | if (mctrl & TIOCM_RTS) | 
|  | locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); | 
|  | else | 
|  | locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); | 
|  |  | 
|  | if (mctrl & TIOCM_DTR) | 
|  | locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); | 
|  | else | 
|  | locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); | 
|  | } | 
|  |  | 
|  | static u_int collie_uart_get_mctrl(struct uart_port *port) | 
|  | { | 
|  | int ret = TIOCM_CD; | 
|  | unsigned int r; | 
|  |  | 
|  | r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); | 
|  | if (r == -ENODEV) | 
|  | return ret; | 
|  | if (r & LOCOMO_GPIO_CTS) | 
|  | ret |= TIOCM_CTS; | 
|  | if (r & LOCOMO_GPIO_DSR) | 
|  | ret |= TIOCM_DSR; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct sa1100_port_fns collie_port_fns __initdata = { | 
|  | .set_mctrl	= collie_uart_set_mctrl, | 
|  | .get_mctrl	= collie_uart_get_mctrl, | 
|  | }; | 
|  |  | 
|  | static int collie_uart_probe(struct locomo_dev *dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int collie_uart_remove(struct locomo_dev *dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct locomo_driver collie_uart_driver = { | 
|  | .drv = { | 
|  | .name = "collie_uart", | 
|  | }, | 
|  | .devid	= LOCOMO_DEVID_UART, | 
|  | .probe	= collie_uart_probe, | 
|  | .remove	= collie_uart_remove, | 
|  | }; | 
|  |  | 
|  | static int __init collie_uart_init(void) | 
|  | { | 
|  | return locomo_driver_register(&collie_uart_driver); | 
|  | } | 
|  | device_initcall(collie_uart_init); | 
|  |  | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static struct resource locomo_resources[] = { | 
|  | [0] = { | 
|  | .start		= 0x40000000, | 
|  | .end		= 0x40001fff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start		= IRQ_GPIO25, | 
|  | .end		= IRQ_GPIO25, | 
|  | .flags		= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct locomo_platform_data locomo_info = { | 
|  | .irq_base	= IRQ_BOARD_START, | 
|  | }; | 
|  |  | 
|  | struct platform_device collie_locomo_device = { | 
|  | .name		= "locomo", | 
|  | .id		= 0, | 
|  | .dev		= { | 
|  | .platform_data	= &locomo_info, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(locomo_resources), | 
|  | .resource	= locomo_resources, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *devices[] __initdata = { | 
|  | &collie_locomo_device, | 
|  | &colliescoop_device, | 
|  | &collie_power_device, | 
|  | }; | 
|  |  | 
|  | static struct mtd_partition collie_partitions[] = { | 
|  | { | 
|  | .name		= "bootloader", | 
|  | .offset 	= 0, | 
|  | .size		= 0x000C0000, | 
|  | .mask_flags	= MTD_WRITEABLE | 
|  | }, { | 
|  | .name		= "kernel", | 
|  | .offset 	= MTDPART_OFS_APPEND, | 
|  | .size		= 0x00100000, | 
|  | }, { | 
|  | .name		= "rootfs", | 
|  | .offset 	= MTDPART_OFS_APPEND, | 
|  | .size		= 0x00e20000, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int collie_flash_init(void) | 
|  | { | 
|  | int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable"); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1); | 
|  | if (rc) | 
|  | gpio_free(COLLIE_GPIO_VPEN); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void collie_set_vpp(int vpp) | 
|  | { | 
|  | gpio_set_value(COLLIE_GPIO_VPEN, vpp); | 
|  | } | 
|  |  | 
|  | static void collie_flash_exit(void) | 
|  | { | 
|  | gpio_free(COLLIE_GPIO_VPEN); | 
|  | } | 
|  |  | 
|  | static struct flash_platform_data collie_flash_data = { | 
|  | .map_name	= "cfi_probe", | 
|  | .init		= collie_flash_init, | 
|  | .set_vpp	= collie_set_vpp, | 
|  | .exit		= collie_flash_exit, | 
|  | .parts		= collie_partitions, | 
|  | .nr_parts	= ARRAY_SIZE(collie_partitions), | 
|  | }; | 
|  |  | 
|  | static struct resource collie_flash_resources[] = { | 
|  | { | 
|  | .start	= SA1100_CS0_PHYS, | 
|  | .end	= SA1100_CS0_PHYS + SZ_32M - 1, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void __init collie_init(void) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | /* cpu initialize */ | 
|  | GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | | 
|  | GPIO_MCP_CLK | GPIO_32_768kHz; | 
|  |  | 
|  | GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | | 
|  | GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | | 
|  | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | | 
|  | _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON | | 
|  | _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; | 
|  |  | 
|  | PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | | 
|  | PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | | 
|  | PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; | 
|  |  | 
|  | PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY | | 
|  | _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC; | 
|  |  | 
|  | PGSR = _COLLIE_GPIO_nREMOCON_ON; | 
|  |  | 
|  | PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; | 
|  |  | 
|  | PCFR = PCFR_OPDE; | 
|  |  | 
|  | GPSR |= _COLLIE_GPIO_UCB1x00_RESET; | 
|  |  | 
|  |  | 
|  | platform_scoop_config = &collie_pcmcia_config; | 
|  |  | 
|  | ret = platform_add_devices(devices, ARRAY_SIZE(devices)); | 
|  | if (ret) { | 
|  | printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); | 
|  | } | 
|  |  | 
|  | sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, | 
|  | ARRAY_SIZE(collie_flash_resources)); | 
|  |  | 
|  | /* | 
|  | * Setup the PPC unit correctly. | 
|  | */ | 
|  | PPDR &= ~PPC_RXD4; | 
|  | PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; | 
|  | PSDR |= PPC_RXD4; | 
|  | PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); | 
|  | PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); | 
|  |  | 
|  | sa11x0_register_mcp(&collie_mcp_data); | 
|  |  | 
|  | sharpsl_save_param(); | 
|  | } | 
|  |  | 
|  | static struct map_desc collie_io_desc[] __initdata = { | 
|  | {	/* 32M main flash (cs0) */ | 
|  | .virtual	= 0xe8000000, | 
|  | .pfn		= __phys_to_pfn(0x00000000), | 
|  | .length		= 0x02000000, | 
|  | .type		= MT_DEVICE | 
|  | }, {	/* 32M boot flash (cs1) */ | 
|  | .virtual	= 0xea000000, | 
|  | .pfn		= __phys_to_pfn(0x08000000), | 
|  | .length		= 0x02000000, | 
|  | .type		= MT_DEVICE | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void __init collie_map_io(void) | 
|  | { | 
|  | sa1100_map_io(); | 
|  | iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); | 
|  |  | 
|  | #ifdef CONFIG_SHARP_LOCOMO | 
|  | sa1100_register_uart_fns(&collie_port_fns); | 
|  | #endif | 
|  | sa1100_register_uart(0, 3); | 
|  | sa1100_register_uart(1, 1); | 
|  | } | 
|  |  | 
|  | MACHINE_START(COLLIE, "Sharp-Collie") | 
|  | .map_io		= collie_map_io, | 
|  | .init_irq	= sa1100_init_irq, | 
|  | .timer		= &sa1100_timer, | 
|  | .init_machine	= collie_init, | 
|  | .restart	= sa11x0_restart, | 
|  | MACHINE_END |