iwlwifi: fix various spelling and typos
Fixing various spelling errors and typos. Mostly in comments. In total
27 words were corrected, some of which occurred more than ones.
Signed-Of-By: Ian Schram <ischram@telenet.be>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 0b3ec7e..60e2546 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -287,7 +287,7 @@
txq->txb = kmalloc(sizeof(txq->txb[0]) *
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
if (!txq->txb) {
- IWL_ERROR("kmalloc for auxilary BD "
+ IWL_ERROR("kmalloc for auxiliary BD "
"structures failed\n");
goto error;
}
@@ -323,7 +323,7 @@
int len;
int rc = 0;
- /* alocate command space + one big command for scan since scan
+ /* allocate command space + one big command for scan since scan
* command is very huge the system will not have two scan at the
* same time */
len = sizeof(struct iwl_cmd) * slots_num;
@@ -405,7 +405,7 @@
*/
/**************************************************************/
-#if 0 /* temparary disable till we add real remove station */
+#if 0 /* temporary disable till we add real remove station */
static u8 iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
{
int index = IWL_INVALID_STATION;
@@ -482,7 +482,7 @@
index = i;
}
- /* These twh conditions has the same outcome but keep them separate
+ /* These two conditions has the same outcome but keep them separate
since they have different meaning */
if (unlikely(index == IWL_INVALID_STATION)) {
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
@@ -959,7 +959,7 @@
/**
* iwl_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit
- * @priv: staging_rxon is comapred to active_rxon
+ * @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing sufficient to require a new
* tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1
@@ -1047,7 +1047,7 @@
/**
* iwl_commit_rxon - commit staging_rxon to hardware
*
- * The RXON command in staging_rxon is commited to the hardware and
+ * The RXON command in staging_rxon is committed to the hardware and
* the active_rxon structure is updated with the new data. This
* function correctly transitions out of the RXON_ASSOC_MSK state if
* a HW tune is required based on the RXON structure changes.
@@ -2150,7 +2150,7 @@
struct iwl_powertable_cmd cmd;
/* If on battery, set to 3,
- * if plugged into AC power, set to CAM ("continuosly aware mode"),
+ * if plugged into AC power, set to CAM ("continuously aware mode"),
* else user level */
switch (mode) {
case IWL_POWER_BATTERY:
@@ -2440,7 +2440,7 @@
}
/*
- * initilize rxon structure with default values fromm eeprom
+ * initialize rxon structure with default values from eeprom
*/
static void iwl_connection_init_rx_config(struct iwl_priv *priv)
{
@@ -2704,7 +2704,7 @@
return priv->hw_setting.bcast_sta_id;
}
default:
- IWL_WARNING("Unkown mode of operation: %d", priv->iw_mode);
+ IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
return priv->hw_setting.bcast_sta_id;
}
}
@@ -3890,7 +3890,7 @@
* The management in the driver is as follows:
* + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
* iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replensish the iwl->rxq->rx_free.
+ * to replenish the iwl->rxq->rx_free.
* + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
* iwl->rxq is replenished and the READ INDEX is updated (updating the
* 'processed' and 'read' driver indexes as well)
@@ -4047,12 +4047,12 @@
}
/**
- * iwl_rx_replensih - Move all used packet from rx_used to rx_free
+ * iwl_rx_replenish - Move all used packet from rx_used to rx_free
*
* When moving to rx_free an SKB is allocated for the slot.
*
* Also restock the Rx queue via iwl_rx_queue_restock.
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
*/
void iwl_rx_replenish(void *data)
{
@@ -6042,7 +6042,7 @@
}
/**
- * iwl_init_alive_start - Called after REPLY_ALIVE notification receieved
+ * iwl_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
@@ -6693,7 +6693,7 @@
return;
done:
- /* inform mac80211 sacn aborted */
+ /* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
}
@@ -6997,7 +6997,7 @@
}
/* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only
- * what is exposed through include/ declrations */
+ * what is exposed through include/ declarations */
if (unlikely(!iwl_param_disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
IWL_DEBUG_MAC80211("leave - scanning\n");
@@ -8541,7 +8541,7 @@
mutex_unlock(&priv->mutex);
- IWL_DEBUG_INFO("Queing UP work.\n");
+ IWL_DEBUG_INFO("Queueing UP work.\n");
queue_work(priv->workqueue, &priv->up);