| /* hvtramp.S: Hypervisor start-cpu trampoline code. |
| * |
| * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net> |
| */ |
| |
| #include <linux/init.h> |
| |
| #include <asm/thread_info.h> |
| #include <asm/hypervisor.h> |
| #include <asm/scratchpad.h> |
| #include <asm/spitfire.h> |
| #include <asm/hvtramp.h> |
| #include <asm/pstate.h> |
| #include <asm/ptrace.h> |
| #include <asm/head.h> |
| #include <asm/asi.h> |
| #include <asm/pil.h> |
| |
| __CPUINIT |
| .align 8 |
| .globl hv_cpu_startup, hv_cpu_startup_end |
| |
| /* This code executes directly out of the hypervisor |
| * with physical addressing (va==pa). %o0 contains |
| * our client argument which for Linux points to |
| * a descriptor data structure which defines the |
| * MMU entries we need to load up. |
| * |
| * After we set things up we enable the MMU and call |
| * into the kernel. |
| * |
| * First setup basic privileged cpu state. |
| */ |
| hv_cpu_startup: |
| SET_GL(0) |
| wrpr %g0, PIL_NORMAL_MAX, %pil |
| wrpr %g0, 0, %canrestore |
| wrpr %g0, 0, %otherwin |
| wrpr %g0, 6, %cansave |
| wrpr %g0, 6, %cleanwin |
| wrpr %g0, 0, %cwp |
| wrpr %g0, 0, %wstate |
| wrpr %g0, 0, %tl |
| |
| sethi %hi(sparc64_ttable_tl0), %g1 |
| wrpr %g1, %tba |
| |
| mov %o0, %l0 |
| |
| lduw [%l0 + HVTRAMP_DESCR_CPU], %g1 |
| mov SCRATCHPAD_CPUID, %g2 |
| stxa %g1, [%g2] ASI_SCRATCHPAD |
| |
| ldx [%l0 + HVTRAMP_DESCR_FAULT_INFO_VA], %g2 |
| stxa %g2, [%g0] ASI_SCRATCHPAD |
| |
| mov 0, %l1 |
| lduw [%l0 + HVTRAMP_DESCR_NUM_MAPPINGS], %l2 |
| add %l0, HVTRAMP_DESCR_MAPS, %l3 |
| |
| 1: ldx [%l3 + HVTRAMP_MAPPING_VADDR], %o0 |
| clr %o1 |
| ldx [%l3 + HVTRAMP_MAPPING_TTE], %o2 |
| mov HV_MMU_IMMU | HV_MMU_DMMU, %o3 |
| mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 |
| ta HV_FAST_TRAP |
| |
| brnz,pn %o0, 80f |
| nop |
| |
| add %l1, 1, %l1 |
| cmp %l1, %l2 |
| blt,a,pt %xcc, 1b |
| add %l3, HVTRAMP_MAPPING_SIZE, %l3 |
| |
| ldx [%l0 + HVTRAMP_DESCR_FAULT_INFO_PA], %o0 |
| mov HV_FAST_MMU_FAULT_AREA_CONF, %o5 |
| ta HV_FAST_TRAP |
| |
| brnz,pn %o0, 80f |
| nop |
| |
| wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate |
| |
| ldx [%l0 + HVTRAMP_DESCR_THREAD_REG], %l6 |
| |
| mov 1, %o0 |
| set 1f, %o1 |
| mov HV_FAST_MMU_ENABLE, %o5 |
| ta HV_FAST_TRAP |
| |
| ba,pt %xcc, 80f |
| nop |
| |
| 1: |
| wr %g0, 0, %fprs |
| wr %g0, ASI_P, %asi |
| |
| mov PRIMARY_CONTEXT, %g7 |
| stxa %g0, [%g7] ASI_MMU |
| membar #Sync |
| |
| mov SECONDARY_CONTEXT, %g7 |
| stxa %g0, [%g7] ASI_MMU |
| membar #Sync |
| |
| mov %l6, %g6 |
| ldx [%g6 + TI_TASK], %g4 |
| |
| mov 1, %g5 |
| sllx %g5, THREAD_SHIFT, %g5 |
| sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5 |
| add %g6, %g5, %sp |
| mov 0, %fp |
| |
| call init_irqwork_curcpu |
| nop |
| call hard_smp_processor_id |
| nop |
| |
| call sun4v_register_mondo_queues |
| nop |
| |
| call init_cur_cpu_trap |
| mov %g6, %o0 |
| |
| wrpr %g0, (PSTATE_PRIV | PSTATE_PEF | PSTATE_IE), %pstate |
| |
| call smp_callin |
| nop |
| call cpu_idle |
| mov 0, %o0 |
| call cpu_panic |
| nop |
| |
| 80: ba,pt %xcc, 80b |
| nop |
| |
| .align 8 |
| hv_cpu_startup_end: |