ARM: dts: imx53-smd: add pinctrl settings
Add pinctrl settings for the exsiting devices in imx53-smd.dts.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 8cdf0a2..06c6858 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -25,22 +25,30 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
esdhc@50008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
uart3: serial@5000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -72,27 +80,49 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
};
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-smd";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
uart2: serial@53fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
@@ -112,6 +142,8 @@
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -131,6 +163,8 @@
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";