can: kvaser_usb: Add support for Kvaser CAN/USB devices
This driver provides support for several Kvaser CAN/USB devices.
Such kind of devices supports up to three CAN network interfaces.
It has been tested with a Kvaser USB Leaf Light (one network interface)
connected to a pch_can interface.
The firmware version of the Kvaser device was 2.5.205.
List of Kvaser devices supported by the driver:
- Kvaser Leaf Light
- Kvaser Leaf Professional HS
- Kvaser Leaf SemiPro HS
- Kvaser Leaf Professional LS
- Kvaser Leaf Professional SWC
- Kvaser Leaf Professional LIN
- Kvaser Leaf SemiPro LS
- Kvaser Leaf SemiPro SWC
- Kvaser Memorator II HS/HS
- Kvaser USBcan Professional HS/HS
- Kvaser Leaf Light GI
- Kvaser Leaf Professional HS (OBD-II connector)
- Kvaser Memorator Professional HS/LS
- Kvaser Leaf Light "China"
- Kvaser BlackBird SemiPro
- Kvaser USBcan R
Signed-off-by: Daniel Berglund <db@kvaser.com>
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 0a68768..a4e4bee 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -13,6 +13,35 @@
This driver supports the CAN-USB/2 interface
from esd electronic system design gmbh (http://www.esd.eu).
+config CAN_KVASER_USB
+ tristate "Kvaser CAN/USB interface"
+ ---help---
+ This driver adds support for Kvaser CAN/USB devices like Kvaser
+ Leaf Light.
+
+ The driver gives support for the following devices:
+ - Kvaser Leaf Light
+ - Kvaser Leaf Professional HS
+ - Kvaser Leaf SemiPro HS
+ - Kvaser Leaf Professional LS
+ - Kvaser Leaf Professional SWC
+ - Kvaser Leaf Professional LIN
+ - Kvaser Leaf SemiPro LS
+ - Kvaser Leaf SemiPro SWC
+ - Kvaser Memorator II HS/HS
+ - Kvaser USBcan Professional HS/HS
+ - Kvaser Leaf Light GI
+ - Kvaser Leaf Professional HS (OBD-II connector)
+ - Kvaser Memorator Professional HS/LS
+ - Kvaser Leaf Light "China"
+ - Kvaser BlackBird SemiPro
+ - Kvaser USBcan R
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kvaser_usb.
+
config CAN_PEAK_USB
tristate "PEAK PCAN-USB/USB Pro interfaces"
---help---