edac: move dimm properties to struct dimm_info
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.
However, such assumption is not true for all types of memory
controllers.
Controllers for FB-DIMM's don't have such requirements.
Also, modern Intel controllers seem to be capable of handling such
differences.
So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.
The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index 3bafa3b..4bfcb3d 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -618,6 +618,7 @@
int slot, int ch, int branch,
struct i7300_dimm_info *dinfo,
struct csrow_info *p_csrow,
+ struct dimm_info *dimm,
u32 *nr_pages)
{
int mtr, ans, addrBits, channel;
@@ -663,10 +664,7 @@
debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
debugf2("\t\tSIZE: %d MB\n", dinfo->megabytes);
- p_csrow->grain = 8;
- p_csrow->mtype = MEM_FB_DDR2;
p_csrow->csrow_idx = slot;
- p_csrow->page_mask = 0;
/*
* The type of error detection actually depends of the
@@ -677,15 +675,17 @@
* See datasheet Sections 7.3.6 to 7.3.8
*/
+ dimm->grain = 8;
+ dimm->mtype = MEM_FB_DDR2;
if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
- p_csrow->edac_mode = EDAC_SECDED;
+ dimm->edac_mode = EDAC_SECDED;
debugf2("\t\tECC code is 8-byte-over-32-byte SECDED+ code\n");
} else {
debugf2("\t\tECC code is on Lockstep mode\n");
if (MTR_DRAM_WIDTH(mtr) == 8)
- p_csrow->edac_mode = EDAC_S8ECD8ED;
+ dimm->edac_mode = EDAC_S8ECD8ED;
else
- p_csrow->edac_mode = EDAC_S4ECD4ED;
+ dimm->edac_mode = EDAC_S4ECD4ED;
}
/* ask what device type on this row */
@@ -694,9 +694,9 @@
IS_SCRBALGO_ENHANCED(pvt->mc_settings) ?
"enhanced" : "normal");
- p_csrow->dtype = DEV_X8;
+ dimm->dtype = DEV_X8;
} else
- p_csrow->dtype = DEV_X4;
+ dimm->dtype = DEV_X4;
return mtr;
}
@@ -779,6 +779,7 @@
int mtr;
int ch, branch, slot, channel;
u32 last_page = 0, nr_pages;
+ struct dimm_info *dimm;
pvt = mci->pvt_info;
@@ -803,20 +804,24 @@
}
/* Get the set of MTR[0-7] regs by each branch */
+ nr_pages = 0;
for (slot = 0; slot < MAX_SLOTS; slot++) {
int where = mtr_regs[slot];
for (branch = 0; branch < MAX_BRANCHES; branch++) {
pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
where,
&pvt->mtr[slot][branch]);
- for (ch = 0; ch < MAX_BRANCHES; ch++) {
+ for (ch = 0; ch < MAX_CH_PER_BRANCH; ch++) {
int channel = to_channel(ch, branch);
dinfo = &pvt->dimm_info[slot][channel];
p_csrow = &mci->csrows[slot];
+ dimm = p_csrow->channels[branch * MAX_CH_PER_BRANCH + ch].dimm;
+
mtr = decode_mtr(pvt, slot, ch, branch,
- dinfo, p_csrow, &nr_pages);
+ dinfo, p_csrow, dimm,
+ &nr_pages);
/* if no DIMMS on this row, continue */
if (!MTR_DIMMS_PRESENT(mtr))
continue;