i2c: Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index f8d0dff..6695d59 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -76,7 +76,7 @@
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
- dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__,
+ dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__,
slave_addr, alg_data->mif.mode);
/* Check for 7 bit slave addresses only */
@@ -110,14 +110,14 @@
iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
I2C_REG_STS(alg_data));
- dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__,
+ dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__,
(slave_addr << 1) | start_bit | alg_data->mif.mode);
/* Write the slave address, START bit and R/W bit */
iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
I2C_REG_TX(alg_data));
- dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__);
+ dev_dbg(&adap->dev, "%s(): exit\n", __func__);
return 0;
}
@@ -135,7 +135,7 @@
long timeout = 1000;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
/* Write a STOP bit to TX FIFO */
iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
@@ -149,7 +149,7 @@
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
}
/**
@@ -164,7 +164,7 @@
u32 val;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
if (alg_data->mif.len > 0) {
/* We still have something to talk about... */
@@ -179,7 +179,7 @@
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
- dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__,
+ dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__,
val, alg_data->mif.len + 1);
if (alg_data->mif.len == 0) {
@@ -197,7 +197,7 @@
del_timer_sync(&alg_data->mif.timer);
dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
- __FUNCTION__);
+ __func__);
complete(&alg_data->mif.complete);
}
@@ -213,13 +213,13 @@
/* Stop timer. */
del_timer_sync(&alg_data->mif.timer);
dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
- "zero-xfer.\n", __FUNCTION__);
+ "zero-xfer.\n", __func__);
complete(&alg_data->mif.complete);
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
}
@@ -237,14 +237,14 @@
u32 ctl = 0;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
/* Check, whether there is already data,
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
- "Rx-fifo...\n", __FUNCTION__);
+ "Rx-fifo...\n", __func__);
if (alg_data->mif.len == 1) {
/* Last byte, do not acknowledge next rcv. */
@@ -276,7 +276,7 @@
if (alg_data->mif.len > 0) {
val = ioread32(I2C_REG_RX(alg_data));
*alg_data->mif.buf++ = (u8) (val & 0xff);
- dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val,
+ dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
alg_data->mif.len);
alg_data->mif.len--;
@@ -300,7 +300,7 @@
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
}
@@ -312,7 +312,7 @@
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
- __FUNCTION__,
+ __func__,
ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)),
alg_data->mif.mode);
@@ -336,7 +336,7 @@
/* Slave did not acknowledge, generate a STOP */
dev_dbg(&adap->dev, "%s(): "
"Slave did not acknowledge, generating a STOP.\n",
- __FUNCTION__);
+ __func__);
i2c_pnx_stop(adap);
/* Disable master interrupts. */
@@ -375,7 +375,7 @@
iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)),
+ __func__, ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)));
return IRQ_HANDLED;
@@ -447,7 +447,7 @@
u32 stat = ioread32(I2C_REG_STS(alg_data));
dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
- __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data)));
+ __func__, num, ioread32(I2C_REG_STS(alg_data)));
bus_reset_if_active(adap);
@@ -473,7 +473,7 @@
alg_data->mif.ret = 0;
alg_data->last = (i == num - 1);
- dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__,
+ dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__,
alg_data->mif.mode,
alg_data->mif.len);
@@ -498,7 +498,7 @@
if (!(rc = alg_data->mif.ret))
completed++;
dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
- __FUNCTION__, rc);
+ __func__, rc);
/* Clear TDI and AFI bits in case they are set. */
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
@@ -522,7 +522,7 @@
alg_data->mif.len = 0;
dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
- __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+ __func__, ioread32(I2C_REG_STS(alg_data)));
if (completed != num)
return ((rc < 0) ? rc : -EREMOTEIO);
@@ -563,7 +563,7 @@
if (!i2c_pnx || !i2c_pnx->adapter) {
dev_err(&pdev->dev, "%s: no platform data supplied\n",
- __FUNCTION__);
+ __func__);
ret = -EINVAL;
goto out;
}