sh: add enable()/disable()/set_rate() to div6 code
This patch updates the div6 clock helper code to add support
for enable(), disable() and set_rate() callbacks.
Needed by the camera clock enabling board code on Migo-R.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index fedc8b8..275942e 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -68,9 +68,53 @@
return clk->freq_table[idx].frequency;
}
+static int sh_clk_div6_set_rate(struct clk *clk,
+ unsigned long rate, int algo_id)
+{
+ unsigned long value;
+ int idx;
+
+ idx = clk_rate_table_find(clk, clk->freq_table, rate);
+ if (idx < 0)
+ return idx;
+
+ value = __raw_readl(clk->enable_reg);
+ value &= ~0x3f;
+ value |= idx;
+ __raw_writel(value, clk->enable_reg);
+ return 0;
+}
+
+static int sh_clk_div6_enable(struct clk *clk)
+{
+ unsigned long value;
+ int ret;
+
+ ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+ if (ret == 0) {
+ value = __raw_readl(clk->enable_reg);
+ value &= ~0x100; /* clear stop bit to enable clock */
+ __raw_writel(value, clk->enable_reg);
+ }
+ return ret;
+}
+
+static void sh_clk_div6_disable(struct clk *clk)
+{
+ unsigned long value;
+
+ value = __raw_readl(clk->enable_reg);
+ value |= 0x100; /* stop clock */
+ value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
+ __raw_writel(value, clk->enable_reg);
+}
+
static struct clk_ops sh_clk_div6_clk_ops = {
.recalc = sh_clk_div6_recalc,
.round_rate = sh_clk_div_round_rate,
+ .set_rate = sh_clk_div6_set_rate,
+ .enable = sh_clk_div6_enable,
+ .disable = sh_clk_div6_disable,
};
int __init sh_clk_div6_register(struct clk *clks, int nr)