| /* | 
 |  *  linux/arch/arm/mach-pxa/lubbock.c | 
 |  * | 
 |  *  Support for the Intel DBPXA250 Development Platform. | 
 |  * | 
 |  *  Author:	Nicolas Pitre | 
 |  *  Created:	Jun 15, 2001 | 
 |  *  Copyright:	MontaVista Software Inc. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as | 
 |  *  published by the Free Software Foundation. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/device.h> | 
 | #include <linux/sysdev.h> | 
 | #include <linux/major.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/interrupt.h> | 
 |  | 
 | #include <asm/setup.h> | 
 | #include <asm/memory.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/hardware.h> | 
 | #include <asm/irq.h> | 
 |  | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 | #include <asm/mach/irq.h> | 
 |  | 
 | #include <asm/hardware/sa1111.h> | 
 |  | 
 | #include <asm/arch/pxa-regs.h> | 
 | #include <asm/arch/lubbock.h> | 
 | #include <asm/arch/udc.h> | 
 | #include <asm/arch/irda.h> | 
 | #include <asm/arch/pxafb.h> | 
 | #include <asm/arch/mmc.h> | 
 |  | 
 | #include "generic.h" | 
 |  | 
 |  | 
 | #define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) | 
 |  | 
 | void lubbock_set_misc_wr(unsigned int mask, unsigned int set) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask); | 
 | 	local_irq_restore(flags); | 
 | } | 
 | EXPORT_SYMBOL(lubbock_set_misc_wr); | 
 |  | 
 | static unsigned long lubbock_irq_enabled; | 
 |  | 
 | static void lubbock_mask_irq(unsigned int irq) | 
 | { | 
 | 	int lubbock_irq = (irq - LUBBOCK_IRQ(0)); | 
 | 	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq)); | 
 | } | 
 |  | 
 | static void lubbock_unmask_irq(unsigned int irq) | 
 | { | 
 | 	int lubbock_irq = (irq - LUBBOCK_IRQ(0)); | 
 | 	/* the irq can be acknowledged only if deasserted, so it's done here */ | 
 | 	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq); | 
 | 	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq)); | 
 | } | 
 |  | 
 | static struct irqchip lubbock_irq_chip = { | 
 | 	.ack		= lubbock_mask_irq, | 
 | 	.mask		= lubbock_mask_irq, | 
 | 	.unmask		= lubbock_unmask_irq, | 
 | }; | 
 |  | 
 | static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc, | 
 | 				struct pt_regs *regs) | 
 | { | 
 | 	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; | 
 | 	do { | 
 | 		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */ | 
 | 		if (likely(pending)) { | 
 | 			irq = LUBBOCK_IRQ(0) + __ffs(pending); | 
 | 			desc = irq_desc + irq; | 
 | 			desc_handle_irq(irq, desc, regs); | 
 | 		} | 
 | 		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; | 
 | 	} while (pending); | 
 | } | 
 |  | 
 | static void __init lubbock_init_irq(void) | 
 | { | 
 | 	int irq; | 
 |  | 
 | 	pxa_init_irq(); | 
 |  | 
 | 	/* setup extra lubbock irqs */ | 
 | 	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { | 
 | 		set_irq_chip(irq, &lubbock_irq_chip); | 
 | 		set_irq_handler(irq, do_level_IRQ); | 
 | 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | 
 | 	} | 
 |  | 
 | 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); | 
 | 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 |  | 
 | static int lubbock_irq_resume(struct sys_device *dev) | 
 | { | 
 | 	LUB_IRQ_MASK_EN = lubbock_irq_enabled; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct sysdev_class lubbock_irq_sysclass = { | 
 | 	set_kset_name("cpld_irq"), | 
 | 	.resume = lubbock_irq_resume, | 
 | }; | 
 |  | 
 | static struct sys_device lubbock_irq_device = { | 
 | 	.cls = &lubbock_irq_sysclass, | 
 | }; | 
 |  | 
 | static int __init lubbock_irq_device_init(void) | 
 | { | 
 | 	int ret = sysdev_class_register(&lubbock_irq_sysclass); | 
 | 	if (ret == 0) | 
 | 		ret = sysdev_register(&lubbock_irq_device); | 
 | 	return ret; | 
 | } | 
 |  | 
 | device_initcall(lubbock_irq_device_init); | 
 |  | 
 | #endif | 
 |  | 
 | static int lubbock_udc_is_connected(void) | 
 | { | 
 | 	return (LUB_MISC_RD & (1 << 9)) == 0; | 
 | } | 
 |  | 
 | static struct pxa2xx_udc_mach_info udc_info __initdata = { | 
 | 	.udc_is_connected	= lubbock_udc_is_connected, | 
 | 	// no D+ pullup; lubbock can't connect/disconnect in software | 
 | }; | 
 |  | 
 | static struct platform_device lub_audio_device = { | 
 | 	.name		= "pxa2xx-ac97", | 
 | 	.id		= -1, | 
 | }; | 
 |  | 
 | static struct resource sa1111_resources[] = { | 
 | 	[0] = { | 
 | 		.start	= 0x10000000, | 
 | 		.end	= 0x10001fff, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.start	= LUBBOCK_SA1111_IRQ, | 
 | 		.end	= LUBBOCK_SA1111_IRQ, | 
 | 		.flags	= IORESOURCE_IRQ, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device sa1111_device = { | 
 | 	.name		= "sa1111", | 
 | 	.id		= -1, | 
 | 	.num_resources	= ARRAY_SIZE(sa1111_resources), | 
 | 	.resource	= sa1111_resources, | 
 | }; | 
 |  | 
 | static struct resource smc91x_resources[] = { | 
 | 	[0] = { | 
 | 		.name	= "smc91x-regs", | 
 | 		.start	= 0x0c000000, | 
 | 		.end	= 0x0c0fffff, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.start	= LUBBOCK_ETH_IRQ, | 
 | 		.end	= LUBBOCK_ETH_IRQ, | 
 | 		.flags	= IORESOURCE_IRQ, | 
 | 	}, | 
 | 	[2] = { | 
 | 		.name	= "smc91x-attrib", | 
 | 		.start	= 0x0e000000, | 
 | 		.end	= 0x0e0fffff, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device smc91x_device = { | 
 | 	.name		= "smc91x", | 
 | 	.id		= -1, | 
 | 	.num_resources	= ARRAY_SIZE(smc91x_resources), | 
 | 	.resource	= smc91x_resources, | 
 | }; | 
 |  | 
 | static struct platform_device *devices[] __initdata = { | 
 | 	&sa1111_device, | 
 | 	&lub_audio_device, | 
 | 	&smc91x_device, | 
 | }; | 
 |  | 
 | static struct pxafb_mach_info sharp_lm8v31 __initdata = { | 
 | 	.pixclock	= 270000, | 
 | 	.xres		= 640, | 
 | 	.yres		= 480, | 
 | 	.bpp		= 16, | 
 | 	.hsync_len	= 1, | 
 | 	.left_margin	= 3, | 
 | 	.right_margin	= 3, | 
 | 	.vsync_len	= 1, | 
 | 	.upper_margin	= 0, | 
 | 	.lower_margin	= 0, | 
 | 	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | 
 | 	.cmap_greyscale	= 0, | 
 | 	.cmap_inverse	= 0, | 
 | 	.cmap_static	= 0, | 
 | 	.lccr0		= LCCR0_SDS, | 
 | 	.lccr3		= LCCR3_PCP | LCCR3_Acb(255), | 
 | }; | 
 |  | 
 | static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data) | 
 | { | 
 | 	/* setup GPIO for PXA25x MMC controller	*/ | 
 | 	pxa_gpio_mode(GPIO6_MMCCLK_MD); | 
 | 	pxa_gpio_mode(GPIO8_MMCCS0_MD); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pxamci_platform_data lubbock_mci_platform_data = { | 
 | 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34, | 
 | 	.init 		= lubbock_mci_init, | 
 | }; | 
 |  | 
 | static void lubbock_irda_transceiver_mode(struct device *dev, int mode) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	if (mode & IR_SIRMODE) { | 
 | 		LUB_MISC_WR &= ~(1 << 4); | 
 | 	} else if (mode & IR_FIRMODE) { | 
 | 		LUB_MISC_WR |= 1 << 4; | 
 | 	} | 
 | 	local_irq_restore(flags); | 
 | } | 
 |  | 
 | static struct pxaficp_platform_data lubbock_ficp_platform_data = { | 
 | 	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE, | 
 | 	.transceiver_mode = lubbock_irda_transceiver_mode, | 
 | }; | 
 |  | 
 | static void __init lubbock_init(void) | 
 | { | 
 | 	pxa_set_udc_info(&udc_info); | 
 | 	set_pxa_fb_info(&sharp_lm8v31); | 
 | 	pxa_set_mci_info(&lubbock_mci_platform_data); | 
 | 	pxa_set_ficp_info(&lubbock_ficp_platform_data); | 
 | 	(void) platform_add_devices(devices, ARRAY_SIZE(devices)); | 
 | } | 
 |  | 
 | static struct map_desc lubbock_io_desc[] __initdata = { | 
 |   	{	/* CPLD */ | 
 | 		.virtual	=  LUBBOCK_FPGA_VIRT, | 
 | 		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS), | 
 | 		.length		= 0x00100000, | 
 | 		.type		= MT_DEVICE | 
 | 	} | 
 | }; | 
 |  | 
 | static void __init lubbock_map_io(void) | 
 | { | 
 | 	pxa_map_io(); | 
 | 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc)); | 
 |  | 
 | 	/* This enables the BTUART */ | 
 | 	pxa_gpio_mode(GPIO42_BTRXD_MD); | 
 | 	pxa_gpio_mode(GPIO43_BTTXD_MD); | 
 | 	pxa_gpio_mode(GPIO44_BTCTS_MD); | 
 | 	pxa_gpio_mode(GPIO45_BTRTS_MD); | 
 |  | 
 | 	/* This is for the SMC chip select */ | 
 | 	pxa_gpio_mode(GPIO79_nCS_3_MD); | 
 |  | 
 | 	/* setup sleep mode values */ | 
 | 	PWER  = 0x00000002; | 
 | 	PFER  = 0x00000000; | 
 | 	PRER  = 0x00000002; | 
 | 	PGSR0 = 0x00008000; | 
 | 	PGSR1 = 0x003F0202; | 
 | 	PGSR2 = 0x0001C000; | 
 | 	PCFR |= PCFR_OPDE; | 
 | } | 
 |  | 
 | MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") | 
 | 	/* Maintainer: MontaVista Software Inc. */ | 
 | 	.phys_ram	= 0xa0000000, | 
 | 	.phys_io	= 0x40000000, | 
 | 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc, | 
 | 	.map_io		= lubbock_map_io, | 
 | 	.init_irq	= lubbock_init_irq, | 
 | 	.timer		= &pxa_timer, | 
 | 	.init_machine	= lubbock_init, | 
 | MACHINE_END |