ARM: shmobile: use __iomem pointers for MMIO
ARM is moving to stricter checks on readl/write functions,
so we need to use the correct types everywhere.
This patch is a bit ugly for shmobile, which is the only platform
that just uses integer literals all over the place, but I can't
see a better way to do this.
Acked-by: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index fa5dfc5..22d6893 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -126,7 +126,7 @@
return;
/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
- __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+ __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
}
static struct r8a66597_platdata usb_host_data = {
@@ -270,17 +270,17 @@
&sdhi1_device,
};
-#define GPIO_SDHID0_D0 0xe60520fc
-#define GPIO_SDHID0_D1 0xe60520fd
-#define GPIO_SDHID0_D2 0xe60520fe
-#define GPIO_SDHID0_D3 0xe60520ff
-#define GPIO_SDHICMD0 0xe6052100
+#define GPIO_SDHID0_D0 IOMEM(0xe60520fc)
+#define GPIO_SDHID0_D1 IOMEM(0xe60520fd)
+#define GPIO_SDHID0_D2 IOMEM(0xe60520fe)
+#define GPIO_SDHID0_D3 IOMEM(0xe60520ff)
+#define GPIO_SDHICMD0 IOMEM(0xe6052100)
-#define GPIO_SDHID1_D0 0xe6052103
-#define GPIO_SDHID1_D1 0xe6052104
-#define GPIO_SDHID1_D2 0xe6052105
-#define GPIO_SDHID1_D3 0xe6052106
-#define GPIO_SDHICMD1 0xe6052107
+#define GPIO_SDHID1_D0 IOMEM(0xe6052103)
+#define GPIO_SDHID1_D1 IOMEM(0xe6052104)
+#define GPIO_SDHID1_D2 IOMEM(0xe6052105)
+#define GPIO_SDHID1_D3 IOMEM(0xe6052106)
+#define GPIO_SDHICMD1 IOMEM(0xe6052107)
static void __init g4evm_init(void)
{
@@ -318,10 +318,10 @@
gpio_request(GPIO_FN_IDIN, NULL);
/* setup USB phy */
- __raw_writew(0x0200, 0xe605810a); /* USBCR1 */
- __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
- __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
- __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+ __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */
+ __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */
+ __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */
+ __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */
/* KEYSC @ CN31 */
gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);