ath5k: reduce checkpatch.pl errors
A few changes to reduce checkpatch.pl errors in the ath5k driver. For
the most part, I only fixed cosmetic things, and left the actual 'code
flow' untouched (hopefully)!
Diff is against wireless-testing HEAD.
Signed-off-by: John Daiker <daikerjohn@gmail.com>
Reviewed-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 3773d98..6caabeb 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2528,8 +2528,7 @@
led->led_dev.brightness_set = ath5k_led_brightness_set;
err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
- if (err)
- {
+ if (err) {
ATH5K_WARN(sc, "could not register LED %s\n", name);
led->sc = NULL;
}
@@ -2890,9 +2889,9 @@
if (*new_flags & FIF_PROMISC_IN_BSS) {
rfilt |= AR5K_RX_FILTER_PROM;
__set_bit(ATH_STAT_PROMISC, sc->status);
- }
- else
+ } else {
__clear_bit(ATH_STAT_PROMISC, sc->status);
+ }
}
/* Note, AR5K_RX_FILTER_MCAST is already enabled */
@@ -2956,7 +2955,7 @@
AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
/* Set filters */
- ath5k_hw_set_rx_filter(ah,rfilt);
+ ath5k_hw_set_rx_filter(ah, rfilt);
/* Set multicast bits */
ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
@@ -2973,7 +2972,7 @@
struct ath5k_softc *sc = hw->priv;
int ret = 0;
- switch(key->alg) {
+ switch (key->alg) {
case ALG_WEP:
/* XXX: fix hardware encryption, its not working. For now
* allow software encryption */
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index ceaa6c4..450bd6e 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -1681,7 +1681,7 @@
*/
/* For AR5212 and combatible */
- if (ah->ah_version == AR5K_AR5212){
+ if (ah->ah_version == AR5K_AR5212) {
/* First set of mode-specific settings */
ath5k_hw_ini_mode_registers(ah,
@@ -1695,7 +1695,7 @@
ar5212_ini, change_channel);
/* Second set of mode-specific settings */
- if (ah->ah_radio == AR5K_RF5111){
+ if (ah->ah_radio == AR5K_RF5111) {
ath5k_hw_ini_mode_registers(ah,
ARRAY_SIZE(ar5212_rf5111_ini_mode_end),
@@ -1706,7 +1706,7 @@
ARRAY_SIZE(rf5111_ini_bbgain),
rf5111_ini_bbgain, change_channel);
- } else if (ah->ah_radio == AR5K_RF5112){
+ } else if (ah->ah_radio == AR5K_RF5112) {
ath5k_hw_ini_mode_registers(ah,
ARRAY_SIZE(ar5212_rf5112_ini_mode_end),
@@ -1716,7 +1716,7 @@
ARRAY_SIZE(rf5112_ini_bbgain),
rf5112_ini_bbgain, change_channel);
- } else if (ah->ah_radio == AR5K_RF5413){
+ } else if (ah->ah_radio == AR5K_RF5413) {
ath5k_hw_ini_mode_registers(ah,
ARRAY_SIZE(rf5413_ini_mode_end),
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index e43f656..69625bf 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1412,7 +1412,8 @@
rf_ini = rfregs_2112a;
rf_size = ARRAY_SIZE(rfregs_5112a);
if (mode < 2) {
- ATH5K_ERR(ah->ah_sc,"invalid channel mode: %i\n",mode);
+ ATH5K_ERR(ah->ah_sc, "invalid channel mode: %i\n",
+ mode);
return -EINVAL;
}
mode = mode - 2; /*no a/turboa modes for 2112*/
@@ -1708,7 +1709,7 @@
if (ah->ah_radio >= AR5K_RF5112) {
ath5k_hw_rfregs_gainf_corr(ah);
ah->ah_gain.g_current =
- ah->ah_gain.g_current>=ah->ah_gain.g_f_corr ?
+ ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
(ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
0;
}