| /* | 
 |  * Broadcom B43 wireless driver | 
 |  * | 
 |  * SDIO over Sonics Silicon Backplane bus glue for b43. | 
 |  * | 
 |  * Copyright (C) 2009 Albert Herranz | 
 |  * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or (at | 
 |  * your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/mmc/card.h> | 
 | #include <linux/mmc/sdio_func.h> | 
 | #include <linux/mmc/sdio_ids.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/ssb/ssb.h> | 
 |  | 
 | #include "sdio.h" | 
 | #include "b43.h" | 
 |  | 
 |  | 
 | #define HNBU_CHIPID		0x01	/* vendor & device id */ | 
 |  | 
 | #define B43_SDIO_BLOCK_SIZE	64	/* rx fifo max size in bytes */ | 
 |  | 
 |  | 
 | static const struct b43_sdio_quirk { | 
 | 	u16 vendor; | 
 | 	u16 device; | 
 | 	unsigned int quirks; | 
 | } b43_sdio_quirks[] = { | 
 | 	{ 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 |  | 
 | static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device) | 
 | { | 
 | 	const struct b43_sdio_quirk *q; | 
 |  | 
 | 	for (q = b43_sdio_quirks; q->quirks; q++) { | 
 | 		if (vendor == q->vendor && device == q->device) | 
 | 			return q->quirks; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void b43_sdio_interrupt_dispatcher(struct sdio_func *func) | 
 | { | 
 | 	struct b43_sdio *sdio = sdio_get_drvdata(func); | 
 | 	struct b43_wldev *dev = sdio->irq_handler_opaque; | 
 |  | 
 | 	if (unlikely(b43_status(dev) < B43_STAT_STARTED)) | 
 | 		return; | 
 |  | 
 | 	sdio_release_host(func); | 
 | 	sdio->irq_handler(dev); | 
 | 	sdio_claim_host(func); | 
 | } | 
 |  | 
 | int b43_sdio_request_irq(struct b43_wldev *dev, | 
 | 			 void (*handler)(struct b43_wldev *dev)) | 
 | { | 
 | 	struct ssb_bus *bus = dev->dev->sdev->bus; | 
 | 	struct sdio_func *func = bus->host_sdio; | 
 | 	struct b43_sdio *sdio = sdio_get_drvdata(func); | 
 | 	int err; | 
 |  | 
 | 	sdio->irq_handler_opaque = dev; | 
 | 	sdio->irq_handler = handler; | 
 | 	sdio_claim_host(func); | 
 | 	err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher); | 
 | 	sdio_release_host(func); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | void b43_sdio_free_irq(struct b43_wldev *dev) | 
 | { | 
 | 	struct ssb_bus *bus = dev->dev->sdev->bus; | 
 | 	struct sdio_func *func = bus->host_sdio; | 
 | 	struct b43_sdio *sdio = sdio_get_drvdata(func); | 
 |  | 
 | 	sdio_claim_host(func); | 
 | 	sdio_release_irq(func); | 
 | 	sdio_release_host(func); | 
 | 	sdio->irq_handler_opaque = NULL; | 
 | 	sdio->irq_handler = NULL; | 
 | } | 
 |  | 
 | static int __devinit b43_sdio_probe(struct sdio_func *func, | 
 | 				    const struct sdio_device_id *id) | 
 | { | 
 | 	struct b43_sdio *sdio; | 
 | 	struct sdio_func_tuple *tuple; | 
 | 	u16 vendor = 0, device = 0; | 
 | 	int error; | 
 |  | 
 | 	/* Look for the card chip identifier. */ | 
 | 	tuple = func->tuples; | 
 | 	while (tuple) { | 
 | 		switch (tuple->code) { | 
 | 		case 0x80: | 
 | 			switch (tuple->data[0]) { | 
 | 			case HNBU_CHIPID: | 
 | 				if (tuple->size != 5) | 
 | 					break; | 
 | 				vendor = tuple->data[1] | (tuple->data[2]<<8); | 
 | 				device = tuple->data[3] | (tuple->data[4]<<8); | 
 | 				dev_info(&func->dev, "Chip ID %04x:%04x\n", | 
 | 					 vendor, device); | 
 | 				break; | 
 | 			default: | 
 | 				break; | 
 | 			} | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		tuple = tuple->next; | 
 | 	} | 
 | 	if (!vendor || !device) { | 
 | 		error = -ENODEV; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	sdio_claim_host(func); | 
 | 	error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE); | 
 | 	if (error) { | 
 | 		dev_err(&func->dev, "failed to set block size to %u bytes," | 
 | 			" error %d\n", B43_SDIO_BLOCK_SIZE, error); | 
 | 		goto err_release_host; | 
 | 	} | 
 | 	error = sdio_enable_func(func); | 
 | 	if (error) { | 
 | 		dev_err(&func->dev, "failed to enable func, error %d\n", error); | 
 | 		goto err_release_host; | 
 | 	} | 
 | 	sdio_release_host(func); | 
 |  | 
 | 	sdio = kzalloc(sizeof(*sdio), GFP_KERNEL); | 
 | 	if (!sdio) { | 
 | 		error = -ENOMEM; | 
 | 		dev_err(&func->dev, "failed to allocate ssb bus\n"); | 
 | 		goto err_disable_func; | 
 | 	} | 
 | 	error = ssb_bus_sdiobus_register(&sdio->ssb, func, | 
 | 					 b43_sdio_get_quirks(vendor, device)); | 
 | 	if (error) { | 
 | 		dev_err(&func->dev, "failed to register ssb sdio bus," | 
 | 			" error %d\n", error); | 
 | 		goto err_free_ssb; | 
 | 	} | 
 | 	sdio_set_drvdata(func, sdio); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_ssb: | 
 | 	kfree(sdio); | 
 | err_disable_func: | 
 | 	sdio_claim_host(func); | 
 | 	sdio_disable_func(func); | 
 | err_release_host: | 
 | 	sdio_release_host(func); | 
 | out: | 
 | 	return error; | 
 | } | 
 |  | 
 | static void __devexit b43_sdio_remove(struct sdio_func *func) | 
 | { | 
 | 	struct b43_sdio *sdio = sdio_get_drvdata(func); | 
 |  | 
 | 	ssb_bus_unregister(&sdio->ssb); | 
 | 	sdio_claim_host(func); | 
 | 	sdio_disable_func(func); | 
 | 	sdio_release_host(func); | 
 | 	kfree(sdio); | 
 | 	sdio_set_drvdata(func, NULL); | 
 | } | 
 |  | 
 | static const struct sdio_device_id b43_sdio_ids[] = { | 
 | 	{ SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */ | 
 | 	{ SDIO_DEVICE(0x0092, 0x0004) }, /* C-guys, Inc. EW-CG1102GC */ | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static struct sdio_driver b43_sdio_driver = { | 
 | 	.name		= "b43-sdio", | 
 | 	.id_table	= b43_sdio_ids, | 
 | 	.probe		= b43_sdio_probe, | 
 | 	.remove		= b43_sdio_remove, | 
 | }; | 
 |  | 
 | int b43_sdio_init(void) | 
 | { | 
 | 	return sdio_register_driver(&b43_sdio_driver); | 
 | } | 
 |  | 
 | void b43_sdio_exit(void) | 
 | { | 
 | 	sdio_unregister_driver(&b43_sdio_driver); | 
 | } |