ARM: SAMSUNG: register uart clocks to clock lookup list
Samsung uart driver lookups the clock using the connection id 'clk_uart_baud'.
The uart clocks for all Samsung platforms are reorganized to register them
with the lookup name as required by the uart driver.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 5a21b15..4eab2cc 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -297,13 +297,6 @@
static struct clksrc_clk clksrc_clks[] = {
{
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
- }, {
/* camera interface bus-clock, divided down from esysclk */
.clk = {
.name = "camif-upll", /* same as 2440 name */
@@ -323,6 +316,15 @@
},
};
+static struct clksrc_clk clk_esys_uart = {
+ /* ART baud-rate clock sourced from esysclk via a divisor */
+ .clk = {
+ .name = "uartclk",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+};
+
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
};
@@ -589,6 +591,12 @@
&clk_arm,
};
+static struct clk_lookup s3c2443_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
+};
+
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
unsigned int *divs, int nr_divs,
int divmask)
@@ -618,6 +626,7 @@
/* See s3c2443/etc notes on disabling clocks at init time */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
s3c2443_common_setup_clocks(get_mpll);
}