Complete irq tracing support for ARM

Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.

I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a09..44912cd 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\