[wireless ieee80211,ipw2200] Lindent source code
No code changes, just Lindent + manual fixups.
This prepares us for updating to the latest Intel driver code, plus
gives the source code a nice facelift.
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index 510a171..94882f3 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -42,7 +42,7 @@
#define MAX_CUSTOM_LEN 64
static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee,
- char *start, char *stop,
+ char *start, char *stop,
struct ieee80211_network *network)
{
char custom[MAX_CUSTOM_LEN];
@@ -66,29 +66,28 @@
iwe.u.data.length = sizeof("<hidden>");
start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
} else {
- iwe.u.data.length = min(network->ssid_len, (u8)32);
+ iwe.u.data.length = min(network->ssid_len, (u8) 32);
start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
- snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
+ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s",
+ ieee80211_modes[network->mode]);
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN);
- /* Add mode */
- iwe.cmd = SIOCGIWMODE;
- if (network->capability &
- (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ if (network->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
if (network->capability & WLAN_CAPABILITY_ESS)
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
- start = iwe_stream_add_event(start, stop, &iwe,
- IW_EV_UINT_LEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN);
}
- /* Add frequency/channel */
+ /* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
iwe.u.freq.e = 3; */
@@ -110,7 +109,7 @@
max_rate = 0;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
- for (i = 0, j = 0; i < network->rates_len; ) {
+ for (i = 0, j = 0; i < network->rates_len;) {
if (j < network->rates_ex_len &&
((network->rates_ex[j] & 0x7F) <
(network->rates[i] & 0x7F)))
@@ -133,8 +132,7 @@
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
- start = iwe_stream_add_event(start, stop, &iwe,
- IW_EV_PARAM_LEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_PARAM_LEN);
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = p - custom;
@@ -164,7 +162,7 @@
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
- if (ieee->wpa_enabled && network->wpa_ie_len){
+ if (ieee->wpa_enabled && network->wpa_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
@@ -179,7 +177,7 @@
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
- if (ieee->wpa_enabled && network->rsn_ie_len){
+ if (ieee->wpa_enabled && network->rsn_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
@@ -199,12 +197,12 @@
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
- " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
+ " Last beacon: %lums ago",
+ (jiffies - network->last_scanned) / (HZ / 100));
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
-
return start;
}
@@ -229,18 +227,19 @@
time_after(network->last_scanned + ieee->scan_age, jiffies))
ev = ipw2100_translate_scan(ieee, ev, stop, network);
else
- IEEE80211_DEBUG_SCAN(
- "Not showing network '%s ("
- MAC_FMT ")' due to age (%lums).\n",
- escape_essid(network->ssid,
- network->ssid_len),
- MAC_ARG(network->bssid),
- (jiffies - network->last_scanned) / (HZ / 100));
+ IEEE80211_DEBUG_SCAN("Not showing network '%s ("
+ MAC_FMT ")' due to age (%lums).\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid),
+ (jiffies -
+ network->last_scanned) / (HZ /
+ 100));
}
spin_unlock_irqrestore(&ieee->lock, flags);
- wrqu->data.length = ev - extra;
+ wrqu->data.length = ev - extra;
wrqu->data.flags = 0;
IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
@@ -292,8 +291,8 @@
if (ieee->crypt[i] != NULL) {
if (key_provided)
break;
- ieee80211_crypt_delayed_deinit(
- ieee, &ieee->crypt[i]);
+ ieee80211_crypt_delayed_deinit(ieee,
+ &ieee->crypt[i]);
}
}
@@ -306,8 +305,6 @@
goto done;
}
-
-
sec.enabled = 1;
sec.flags |= SEC_ENABLED;
@@ -341,8 +338,7 @@
new_crypt = NULL;
printk(KERN_WARNING "%s: could not initialize WEP: "
- "load module ieee80211_crypt_wep\n",
- dev->name);
+ "load module ieee80211_crypt_wep\n", dev->name);
return -EOPNOTSUPP;
}
*crypt = new_crypt;
@@ -359,7 +355,7 @@
key, escape_essid(sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
- (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
@@ -382,15 +378,15 @@
/* No key data - just set the default TX key index */
if (key_provided) {
- IEEE80211_DEBUG_WX(
- "Setting key %d to default Tx key.\n", key);
+ IEEE80211_DEBUG_WX
+ ("Setting key %d to default Tx key.\n", key);
ieee->tx_keyidx = key;
sec.active_key = key;
sec.flags |= SEC_ACTIVE_KEY;
}
}
- done:
+ done:
ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
sec.flags |= SEC_AUTH_MODE;
@@ -400,7 +396,7 @@
/* For now we just support WEP, so only set that security level...
* TODO: When WPA is added this is one place that needs to change */
sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+ sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
if (ieee->set_security)
ieee->set_security(dev, &sec);