|  | /* | 
|  | *  pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $) | 
|  | * | 
|  | *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
|  | *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
|  | * | 
|  | * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or (at | 
|  | *  your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, but | 
|  | *  WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | *  General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License along | 
|  | *  with this program; if not, write to the Free Software Foundation, Inc., | 
|  | *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | 
|  | * | 
|  | * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/pci-acpi.h> | 
|  | #include <linux/pci-aspm.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/slab.h> | 
|  | #include <acpi/acpi_bus.h> | 
|  | #include <acpi/acpi_drivers.h> | 
|  | #include <acpi/apei.h> | 
|  |  | 
|  | #define PREFIX "ACPI: " | 
|  |  | 
|  | #define _COMPONENT		ACPI_PCI_COMPONENT | 
|  | ACPI_MODULE_NAME("pci_root"); | 
|  | #define ACPI_PCI_ROOT_CLASS		"pci_bridge" | 
|  | #define ACPI_PCI_ROOT_DEVICE_NAME	"PCI Root Bridge" | 
|  | static int acpi_pci_root_add(struct acpi_device *device); | 
|  | static int acpi_pci_root_remove(struct acpi_device *device, int type); | 
|  | static int acpi_pci_root_start(struct acpi_device *device); | 
|  |  | 
|  | #define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \ | 
|  | | OSC_ACTIVE_STATE_PWR_SUPPORT \ | 
|  | | OSC_CLOCK_PWR_CAPABILITY_SUPPORT \ | 
|  | | OSC_MSI_SUPPORT) | 
|  |  | 
|  | static const struct acpi_device_id root_device_ids[] = { | 
|  | {"PNP0A03", 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, root_device_ids); | 
|  |  | 
|  | static struct acpi_driver acpi_pci_root_driver = { | 
|  | .name = "pci_root", | 
|  | .class = ACPI_PCI_ROOT_CLASS, | 
|  | .ids = root_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_pci_root_add, | 
|  | .remove = acpi_pci_root_remove, | 
|  | .start = acpi_pci_root_start, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Lock to protect both acpi_pci_roots and acpi_pci_drivers lists */ | 
|  | static DEFINE_MUTEX(acpi_pci_root_lock); | 
|  | static LIST_HEAD(acpi_pci_roots); | 
|  | static LIST_HEAD(acpi_pci_drivers); | 
|  |  | 
|  | static DEFINE_MUTEX(osc_lock); | 
|  |  | 
|  | int acpi_pci_register_driver(struct acpi_pci_driver *driver) | 
|  | { | 
|  | int n = 0; | 
|  | struct acpi_pci_root *root; | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_add_tail(&driver->node, &acpi_pci_drivers); | 
|  | if (driver->add) | 
|  | list_for_each_entry(root, &acpi_pci_roots, node) { | 
|  | driver->add(root); | 
|  | n++; | 
|  | } | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  |  | 
|  | return n; | 
|  | } | 
|  | EXPORT_SYMBOL(acpi_pci_register_driver); | 
|  |  | 
|  | void acpi_pci_unregister_driver(struct acpi_pci_driver *driver) | 
|  | { | 
|  | struct acpi_pci_root *root; | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_del(&driver->node); | 
|  | if (driver->remove) | 
|  | list_for_each_entry(root, &acpi_pci_roots, node) | 
|  | driver->remove(root); | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(acpi_pci_unregister_driver); | 
|  |  | 
|  | acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus) | 
|  | { | 
|  | struct acpi_pci_root *root; | 
|  | acpi_handle handle = NULL; | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_for_each_entry(root, &acpi_pci_roots, node) | 
|  | if ((root->segment == (u16) seg) && | 
|  | (root->secondary.start == (u16) bus)) { | 
|  | handle = root->device->handle; | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  | return handle; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle); | 
|  |  | 
|  | /** | 
|  | * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge | 
|  | * @handle - the ACPI CA node in question. | 
|  | * | 
|  | * Note: we could make this API take a struct acpi_device * instead, but | 
|  | * for now, it's more convenient to operate on an acpi_handle. | 
|  | */ | 
|  | int acpi_is_root_bridge(acpi_handle handle) | 
|  | { | 
|  | int ret; | 
|  | struct acpi_device *device; | 
|  |  | 
|  | ret = acpi_bus_get_device(handle, &device); | 
|  | if (ret) | 
|  | return 0; | 
|  |  | 
|  | ret = acpi_match_device_ids(device, root_device_ids); | 
|  | if (ret) | 
|  | return 0; | 
|  | else | 
|  | return 1; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(acpi_is_root_bridge); | 
|  |  | 
|  | static acpi_status | 
|  | get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data) | 
|  | { | 
|  | struct resource *res = data; | 
|  | struct acpi_resource_address64 address; | 
|  |  | 
|  | if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 && | 
|  | resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 && | 
|  | resource->type != ACPI_RESOURCE_TYPE_ADDRESS64) | 
|  | return AE_OK; | 
|  |  | 
|  | acpi_resource_to_address64(resource, &address); | 
|  | if ((address.address_length > 0) && | 
|  | (address.resource_type == ACPI_BUS_NUMBER_RANGE)) { | 
|  | res->start = address.minimum; | 
|  | res->end = address.minimum + address.address_length - 1; | 
|  | } | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static acpi_status try_get_root_bridge_busnr(acpi_handle handle, | 
|  | struct resource *res) | 
|  | { | 
|  | acpi_status status; | 
|  |  | 
|  | res->start = -1; | 
|  | status = | 
|  | acpi_walk_resources(handle, METHOD_NAME__CRS, | 
|  | get_root_bridge_busnr_callback, res); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return status; | 
|  | if (res->start == -1) | 
|  | return AE_ERROR; | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static void acpi_pci_bridge_scan(struct acpi_device *device) | 
|  | { | 
|  | int status; | 
|  | struct acpi_device *child = NULL; | 
|  |  | 
|  | if (device->flags.bus_address) | 
|  | if (device->parent && device->parent->ops.bind) { | 
|  | status = device->parent->ops.bind(device); | 
|  | if (!status) { | 
|  | list_for_each_entry(child, &device->children, node) | 
|  | acpi_pci_bridge_scan(child); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766"; | 
|  |  | 
|  | static acpi_status acpi_pci_run_osc(acpi_handle handle, | 
|  | const u32 *capbuf, u32 *retval) | 
|  | { | 
|  | struct acpi_osc_context context = { | 
|  | .uuid_str = pci_osc_uuid_str, | 
|  | .rev = 1, | 
|  | .cap.length = 12, | 
|  | .cap.pointer = (void *)capbuf, | 
|  | }; | 
|  | acpi_status status; | 
|  |  | 
|  | status = acpi_run_osc(handle, &context); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | *retval = *((u32 *)(context.ret.pointer + 8)); | 
|  | kfree(context.ret.pointer); | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root, | 
|  | u32 support, | 
|  | u32 *control) | 
|  | { | 
|  | acpi_status status; | 
|  | u32 result, capbuf[3]; | 
|  |  | 
|  | support &= OSC_PCI_SUPPORT_MASKS; | 
|  | support |= root->osc_support_set; | 
|  |  | 
|  | capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; | 
|  | capbuf[OSC_SUPPORT_TYPE] = support; | 
|  | if (control) { | 
|  | *control &= OSC_PCI_CONTROL_MASKS; | 
|  | capbuf[OSC_CONTROL_TYPE] = *control | root->osc_control_set; | 
|  | } else { | 
|  | /* Run _OSC query for all possible controls. */ | 
|  | capbuf[OSC_CONTROL_TYPE] = OSC_PCI_CONTROL_MASKS; | 
|  | } | 
|  |  | 
|  | status = acpi_pci_run_osc(root->device->handle, capbuf, &result); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | root->osc_support_set = support; | 
|  | if (control) | 
|  | *control = result; | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags) | 
|  | { | 
|  | acpi_status status; | 
|  | acpi_handle tmp; | 
|  |  | 
|  | status = acpi_get_handle(root->device->handle, "_OSC", &tmp); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return status; | 
|  | mutex_lock(&osc_lock); | 
|  | status = acpi_pci_query_osc(root, flags, NULL); | 
|  | mutex_unlock(&osc_lock); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle) | 
|  | { | 
|  | struct acpi_pci_root *root; | 
|  | struct acpi_device *device; | 
|  |  | 
|  | if (acpi_bus_get_device(handle, &device) || | 
|  | acpi_match_device_ids(device, root_device_ids)) | 
|  | return NULL; | 
|  |  | 
|  | root = acpi_driver_data(device); | 
|  |  | 
|  | return root; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(acpi_pci_find_root); | 
|  |  | 
|  | struct acpi_handle_node { | 
|  | struct list_head node; | 
|  | acpi_handle handle; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev | 
|  | * @handle: the handle in question | 
|  | * | 
|  | * Given an ACPI CA handle, the desired PCI device is located in the | 
|  | * list of PCI devices. | 
|  | * | 
|  | * If the device is found, its reference count is increased and this | 
|  | * function returns a pointer to its data structure.  The caller must | 
|  | * decrement the reference count by calling pci_dev_put(). | 
|  | * If no device is found, %NULL is returned. | 
|  | */ | 
|  | struct pci_dev *acpi_get_pci_dev(acpi_handle handle) | 
|  | { | 
|  | int dev, fn; | 
|  | unsigned long long adr; | 
|  | acpi_status status; | 
|  | acpi_handle phandle; | 
|  | struct pci_bus *pbus; | 
|  | struct pci_dev *pdev = NULL; | 
|  | struct acpi_handle_node *node, *tmp; | 
|  | struct acpi_pci_root *root; | 
|  | LIST_HEAD(device_list); | 
|  |  | 
|  | /* | 
|  | * Walk up the ACPI CA namespace until we reach a PCI root bridge. | 
|  | */ | 
|  | phandle = handle; | 
|  | while (!acpi_is_root_bridge(phandle)) { | 
|  | node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL); | 
|  | if (!node) | 
|  | goto out; | 
|  |  | 
|  | INIT_LIST_HEAD(&node->node); | 
|  | node->handle = phandle; | 
|  | list_add(&node->node, &device_list); | 
|  |  | 
|  | status = acpi_get_parent(phandle, &phandle); | 
|  | if (ACPI_FAILURE(status)) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | root = acpi_pci_find_root(phandle); | 
|  | if (!root) | 
|  | goto out; | 
|  |  | 
|  | pbus = root->bus; | 
|  |  | 
|  | /* | 
|  | * Now, walk back down the PCI device tree until we return to our | 
|  | * original handle. Assumes that everything between the PCI root | 
|  | * bridge and the device we're looking for must be a P2P bridge. | 
|  | */ | 
|  | list_for_each_entry(node, &device_list, node) { | 
|  | acpi_handle hnd = node->handle; | 
|  | status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr); | 
|  | if (ACPI_FAILURE(status)) | 
|  | goto out; | 
|  | dev = (adr >> 16) & 0xffff; | 
|  | fn  = adr & 0xffff; | 
|  |  | 
|  | pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn)); | 
|  | if (!pdev || hnd == handle) | 
|  | break; | 
|  |  | 
|  | pbus = pdev->subordinate; | 
|  | pci_dev_put(pdev); | 
|  |  | 
|  | /* | 
|  | * This function may be called for a non-PCI device that has a | 
|  | * PCI parent (eg. a disk under a PCI SATA controller).  In that | 
|  | * case pdev->subordinate will be NULL for the parent. | 
|  | */ | 
|  | if (!pbus) { | 
|  | dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n"); | 
|  | pdev = NULL; | 
|  | break; | 
|  | } | 
|  | } | 
|  | out: | 
|  | list_for_each_entry_safe(node, tmp, &device_list, node) | 
|  | kfree(node); | 
|  |  | 
|  | return pdev; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(acpi_get_pci_dev); | 
|  |  | 
|  | /** | 
|  | * acpi_pci_osc_control_set - Request control of PCI root _OSC features. | 
|  | * @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex). | 
|  | * @mask: Mask of _OSC bits to request control of, place to store control mask. | 
|  | * @req: Mask of _OSC bits the control of is essential to the caller. | 
|  | * | 
|  | * Run _OSC query for @mask and if that is successful, compare the returned | 
|  | * mask of control bits with @req.  If all of the @req bits are set in the | 
|  | * returned mask, run _OSC request for it. | 
|  | * | 
|  | * The variable at the @mask address may be modified regardless of whether or | 
|  | * not the function returns success.  On success it will contain the mask of | 
|  | * _OSC bits the BIOS has granted control of, but its contents are meaningless | 
|  | * on failure. | 
|  | **/ | 
|  | acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req) | 
|  | { | 
|  | struct acpi_pci_root *root; | 
|  | acpi_status status; | 
|  | u32 ctrl, capbuf[3]; | 
|  | acpi_handle tmp; | 
|  |  | 
|  | if (!mask) | 
|  | return AE_BAD_PARAMETER; | 
|  |  | 
|  | ctrl = *mask & OSC_PCI_CONTROL_MASKS; | 
|  | if ((ctrl & req) != req) | 
|  | return AE_TYPE; | 
|  |  | 
|  | root = acpi_pci_find_root(handle); | 
|  | if (!root) | 
|  | return AE_NOT_EXIST; | 
|  |  | 
|  | status = acpi_get_handle(handle, "_OSC", &tmp); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return status; | 
|  |  | 
|  | mutex_lock(&osc_lock); | 
|  |  | 
|  | *mask = ctrl | root->osc_control_set; | 
|  | /* No need to evaluate _OSC if the control was already granted. */ | 
|  | if ((root->osc_control_set & ctrl) == ctrl) | 
|  | goto out; | 
|  |  | 
|  | /* Need to check the available controls bits before requesting them. */ | 
|  | while (*mask) { | 
|  | status = acpi_pci_query_osc(root, root->osc_support_set, mask); | 
|  | if (ACPI_FAILURE(status)) | 
|  | goto out; | 
|  | if (ctrl == *mask) | 
|  | break; | 
|  | ctrl = *mask; | 
|  | } | 
|  |  | 
|  | if ((ctrl & req) != req) { | 
|  | status = AE_SUPPORT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | capbuf[OSC_QUERY_TYPE] = 0; | 
|  | capbuf[OSC_SUPPORT_TYPE] = root->osc_support_set; | 
|  | capbuf[OSC_CONTROL_TYPE] = ctrl; | 
|  | status = acpi_pci_run_osc(handle, capbuf, mask); | 
|  | if (ACPI_SUCCESS(status)) | 
|  | root->osc_control_set = *mask; | 
|  | out: | 
|  | mutex_unlock(&osc_lock); | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL(acpi_pci_osc_control_set); | 
|  |  | 
|  | static int __devinit acpi_pci_root_add(struct acpi_device *device) | 
|  | { | 
|  | unsigned long long segment, bus; | 
|  | acpi_status status; | 
|  | int result; | 
|  | struct acpi_pci_root *root; | 
|  | acpi_handle handle; | 
|  | struct acpi_device *child; | 
|  | u32 flags, base_flags; | 
|  |  | 
|  | root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); | 
|  | if (!root) | 
|  | return -ENOMEM; | 
|  |  | 
|  | segment = 0; | 
|  | status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL, | 
|  | &segment); | 
|  | if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { | 
|  | printk(KERN_ERR PREFIX "can't evaluate _SEG\n"); | 
|  | result = -ENODEV; | 
|  | goto end; | 
|  | } | 
|  |  | 
|  | /* Check _CRS first, then _BBN.  If no _BBN, default to zero. */ | 
|  | root->secondary.flags = IORESOURCE_BUS; | 
|  | status = try_get_root_bridge_busnr(device->handle, &root->secondary); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | /* | 
|  | * We need both the start and end of the downstream bus range | 
|  | * to interpret _CBA (MMCONFIG base address), so it really is | 
|  | * supposed to be in _CRS.  If we don't find it there, all we | 
|  | * can do is assume [_BBN-0xFF] or [0-0xFF]. | 
|  | */ | 
|  | root->secondary.end = 0xFF; | 
|  | printk(KERN_WARNING FW_BUG PREFIX | 
|  | "no secondary bus range in _CRS\n"); | 
|  | status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, | 
|  | NULL, &bus); | 
|  | if (ACPI_SUCCESS(status)) | 
|  | root->secondary.start = bus; | 
|  | else if (status == AE_NOT_FOUND) | 
|  | root->secondary.start = 0; | 
|  | else { | 
|  | printk(KERN_ERR PREFIX "can't evaluate _BBN\n"); | 
|  | result = -ENODEV; | 
|  | goto end; | 
|  | } | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&root->node); | 
|  | root->device = device; | 
|  | root->segment = segment & 0xFFFF; | 
|  | strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME); | 
|  | strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS); | 
|  | device->driver_data = root; | 
|  |  | 
|  | root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle); | 
|  |  | 
|  | /* | 
|  | * All supported architectures that use ACPI have support for | 
|  | * PCI domains, so we indicate this in _OSC support capabilities. | 
|  | */ | 
|  | flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; | 
|  | acpi_pci_osc_support(root, flags); | 
|  |  | 
|  | /* | 
|  | * TBD: Need PCI interface for enumeration/configuration of roots. | 
|  | */ | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_add_tail(&root->node, &acpi_pci_roots); | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  |  | 
|  | printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n", | 
|  | acpi_device_name(device), acpi_device_bid(device), | 
|  | root->segment, &root->secondary); | 
|  |  | 
|  | /* | 
|  | * Scan the Root Bridge | 
|  | * -------------------- | 
|  | * Must do this prior to any attempt to bind the root device, as the | 
|  | * PCI namespace does not get created until this call is made (and | 
|  | * thus the root bridge's pci_dev does not exist). | 
|  | */ | 
|  | root->bus = pci_acpi_scan_root(root); | 
|  | if (!root->bus) { | 
|  | printk(KERN_ERR PREFIX | 
|  | "Bus %04x:%02x not present in PCI namespace\n", | 
|  | root->segment, (unsigned int)root->secondary.start); | 
|  | result = -ENODEV; | 
|  | goto out_del_root; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Attach ACPI-PCI Context | 
|  | * ----------------------- | 
|  | * Thus binding the ACPI and PCI devices. | 
|  | */ | 
|  | result = acpi_pci_bind_root(device); | 
|  | if (result) | 
|  | goto out_del_root; | 
|  |  | 
|  | /* | 
|  | * PCI Routing Table | 
|  | * ----------------- | 
|  | * Evaluate and parse _PRT, if exists. | 
|  | */ | 
|  | status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle); | 
|  | if (ACPI_SUCCESS(status)) | 
|  | result = acpi_pci_irq_add_prt(device->handle, root->bus); | 
|  |  | 
|  | /* | 
|  | * Scan and bind all _ADR-Based Devices | 
|  | */ | 
|  | list_for_each_entry(child, &device->children, node) | 
|  | acpi_pci_bridge_scan(child); | 
|  |  | 
|  | /* Indicate support for various _OSC capabilities. */ | 
|  | if (pci_ext_cfg_avail(root->bus->self)) | 
|  | flags |= OSC_EXT_PCI_CONFIG_SUPPORT; | 
|  | if (pcie_aspm_support_enabled()) | 
|  | flags |= OSC_ACTIVE_STATE_PWR_SUPPORT | | 
|  | OSC_CLOCK_PWR_CAPABILITY_SUPPORT; | 
|  | if (pci_msi_enabled()) | 
|  | flags |= OSC_MSI_SUPPORT; | 
|  | if (flags != base_flags) { | 
|  | status = acpi_pci_osc_support(root, flags); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | dev_info(root->bus->bridge, "ACPI _OSC support " | 
|  | "notification failed, disabling PCIe ASPM\n"); | 
|  | pcie_no_aspm(); | 
|  | flags = base_flags; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!pcie_ports_disabled | 
|  | && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { | 
|  | flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL | 
|  | | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | 
|  | | OSC_PCI_EXPRESS_PME_CONTROL; | 
|  |  | 
|  | if (pci_aer_available()) { | 
|  | if (aer_acpi_firmware_first()) | 
|  | dev_dbg(root->bus->bridge, | 
|  | "PCIe errors handled by BIOS.\n"); | 
|  | else | 
|  | flags |= OSC_PCI_EXPRESS_AER_CONTROL; | 
|  | } | 
|  |  | 
|  | dev_info(root->bus->bridge, | 
|  | "Requesting ACPI _OSC control (0x%02x)\n", flags); | 
|  |  | 
|  | status = acpi_pci_osc_control_set(device->handle, &flags, | 
|  | OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | dev_info(root->bus->bridge, | 
|  | "ACPI _OSC control (0x%02x) granted\n", flags); | 
|  | if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { | 
|  | /* | 
|  | * We have ASPM control, but the FADT indicates | 
|  | * that it's unsupported. Clear it. | 
|  | */ | 
|  | pcie_clear_aspm(root->bus); | 
|  | } | 
|  | } else { | 
|  | dev_info(root->bus->bridge, | 
|  | "ACPI _OSC request failed (%s), " | 
|  | "returned control mask: 0x%02x\n", | 
|  | acpi_format_exception(status), flags); | 
|  | pr_info("ACPI _OSC control for PCIe not granted, " | 
|  | "disabling ASPM\n"); | 
|  | pcie_no_aspm(); | 
|  | } | 
|  | } else { | 
|  | dev_info(root->bus->bridge, | 
|  | "Unable to request _OSC control " | 
|  | "(_OSC support mask: 0x%02x)\n", flags); | 
|  | } | 
|  |  | 
|  | pci_acpi_add_bus_pm_notifier(device, root->bus); | 
|  | if (device->wakeup.flags.run_wake) | 
|  | device_set_run_wake(root->bus->bridge, true); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_del_root: | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_del(&root->node); | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  | end: | 
|  | kfree(root); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_pci_root_start(struct acpi_device *device) | 
|  | { | 
|  | struct acpi_pci_root *root = acpi_driver_data(device); | 
|  | struct acpi_pci_driver *driver; | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_for_each_entry(driver, &acpi_pci_drivers, node) | 
|  | if (driver->add) | 
|  | driver->add(root); | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  |  | 
|  | pci_bus_add_devices(root->bus); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_pci_root_remove(struct acpi_device *device, int type) | 
|  | { | 
|  | struct acpi_pci_root *root = acpi_driver_data(device); | 
|  | struct acpi_pci_driver *driver; | 
|  |  | 
|  | mutex_lock(&acpi_pci_root_lock); | 
|  | list_for_each_entry(driver, &acpi_pci_drivers, node) | 
|  | if (driver->remove) | 
|  | driver->remove(root); | 
|  |  | 
|  | device_set_run_wake(root->bus->bridge, false); | 
|  | pci_acpi_remove_bus_pm_notifier(device); | 
|  |  | 
|  | list_del(&root->node); | 
|  | mutex_unlock(&acpi_pci_root_lock); | 
|  | kfree(root); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init acpi_pci_root_init(void) | 
|  | { | 
|  | acpi_hest_init(); | 
|  |  | 
|  | if (acpi_pci_disabled) | 
|  | return 0; | 
|  |  | 
|  | pci_acpi_crs_quirks(); | 
|  | if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(acpi_pci_root_init); |