|  | /* | 
|  | * udc.c - ChipIdea UDC driver | 
|  | * | 
|  | * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. | 
|  | * | 
|  | * Author: David Lopo | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dmapool.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/usb/ch9.h> | 
|  | #include <linux/usb/gadget.h> | 
|  | #include <linux/usb/otg.h> | 
|  | #include <linux/usb/chipidea.h> | 
|  |  | 
|  | #include "ci.h" | 
|  | #include "udc.h" | 
|  | #include "bits.h" | 
|  | #include "debug.h" | 
|  |  | 
|  | /* control endpoint description */ | 
|  | static const struct usb_endpoint_descriptor | 
|  | ctrl_endpt_out_desc = { | 
|  | .bLength         = USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType = USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress = USB_DIR_OUT, | 
|  | .bmAttributes    = USB_ENDPOINT_XFER_CONTROL, | 
|  | .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX), | 
|  | }; | 
|  |  | 
|  | static const struct usb_endpoint_descriptor | 
|  | ctrl_endpt_in_desc = { | 
|  | .bLength         = USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType = USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress = USB_DIR_IN, | 
|  | .bmAttributes    = USB_ENDPOINT_XFER_CONTROL, | 
|  | .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX), | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * hw_ep_bit: calculates the bit number | 
|  | * @num: endpoint number | 
|  | * @dir: endpoint direction | 
|  | * | 
|  | * This function returns bit number | 
|  | */ | 
|  | static inline int hw_ep_bit(int num, int dir) | 
|  | { | 
|  | return num + (dir ? 16 : 0); | 
|  | } | 
|  |  | 
|  | static inline int ep_to_bit(struct ci13xxx *ci, int n) | 
|  | { | 
|  | int fill = 16 - ci->hw_ep_max / 2; | 
|  |  | 
|  | if (n >= ci->hw_ep_max / 2) | 
|  | n += fill; | 
|  |  | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_device_state: enables/disables interrupts (execute without interruption) | 
|  | * @dma: 0 => disable, !0 => enable and set dma engine | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_device_state(struct ci13xxx *ci, u32 dma) | 
|  | { | 
|  | if (dma) { | 
|  | hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); | 
|  | /* interrupt, error, port change, reset, sleep/suspend */ | 
|  | hw_write(ci, OP_USBINTR, ~0, | 
|  | USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); | 
|  | } else { | 
|  | hw_write(ci, OP_USBINTR, ~0, 0); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_flush: flush endpoint fifo (execute without interruption) | 
|  | * @num: endpoint number | 
|  | * @dir: endpoint direction | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_ep_flush(struct ci13xxx *ci, int num, int dir) | 
|  | { | 
|  | int n = hw_ep_bit(num, dir); | 
|  |  | 
|  | do { | 
|  | /* flush any pending transfer */ | 
|  | hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); | 
|  | while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) | 
|  | cpu_relax(); | 
|  | } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_disable: disables endpoint (execute without interruption) | 
|  | * @num: endpoint number | 
|  | * @dir: endpoint direction | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_ep_disable(struct ci13xxx *ci, int num, int dir) | 
|  | { | 
|  | hw_ep_flush(ci, num, dir); | 
|  | hw_write(ci, OP_ENDPTCTRL + num, | 
|  | dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_enable: enables endpoint (execute without interruption) | 
|  | * @num:  endpoint number | 
|  | * @dir:  endpoint direction | 
|  | * @type: endpoint type | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type) | 
|  | { | 
|  | u32 mask, data; | 
|  |  | 
|  | if (dir) { | 
|  | mask  = ENDPTCTRL_TXT;  /* type    */ | 
|  | data  = type << ffs_nr(mask); | 
|  |  | 
|  | mask |= ENDPTCTRL_TXS;  /* unstall */ | 
|  | mask |= ENDPTCTRL_TXR;  /* reset data toggle */ | 
|  | data |= ENDPTCTRL_TXR; | 
|  | mask |= ENDPTCTRL_TXE;  /* enable  */ | 
|  | data |= ENDPTCTRL_TXE; | 
|  | } else { | 
|  | mask  = ENDPTCTRL_RXT;  /* type    */ | 
|  | data  = type << ffs_nr(mask); | 
|  |  | 
|  | mask |= ENDPTCTRL_RXS;  /* unstall */ | 
|  | mask |= ENDPTCTRL_RXR;  /* reset data toggle */ | 
|  | data |= ENDPTCTRL_RXR; | 
|  | mask |= ENDPTCTRL_RXE;  /* enable  */ | 
|  | data |= ENDPTCTRL_RXE; | 
|  | } | 
|  | hw_write(ci, OP_ENDPTCTRL + num, mask, data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_get_halt: return endpoint halt status | 
|  | * @num: endpoint number | 
|  | * @dir: endpoint direction | 
|  | * | 
|  | * This function returns 1 if endpoint halted | 
|  | */ | 
|  | static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir) | 
|  | { | 
|  | u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; | 
|  |  | 
|  | return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_test_and_clear_setup_status: test & clear setup status (execute without | 
|  | *                                 interruption) | 
|  | * @n: endpoint number | 
|  | * | 
|  | * This function returns setup status | 
|  | */ | 
|  | static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n) | 
|  | { | 
|  | n = ep_to_bit(ci, n); | 
|  | return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_prime: primes endpoint (execute without interruption) | 
|  | * @num:     endpoint number | 
|  | * @dir:     endpoint direction | 
|  | * @is_ctrl: true if control endpoint | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl) | 
|  | { | 
|  | int n = hw_ep_bit(num, dir); | 
|  |  | 
|  | if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) | 
|  | return -EAGAIN; | 
|  |  | 
|  | hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); | 
|  |  | 
|  | while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) | 
|  | cpu_relax(); | 
|  | if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) | 
|  | return -EAGAIN; | 
|  |  | 
|  | /* status shoult be tested according with manual but it doesn't work */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute | 
|  | *                 without interruption) | 
|  | * @num:   endpoint number | 
|  | * @dir:   endpoint direction | 
|  | * @value: true => stall, false => unstall | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value) | 
|  | { | 
|  | if (value != 0 && value != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | do { | 
|  | enum ci13xxx_regs reg = OP_ENDPTCTRL + num; | 
|  | u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; | 
|  | u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; | 
|  |  | 
|  | /* data toggle - reserved for EP0 but it's in ESS */ | 
|  | hw_write(ci, reg, mask_xs|mask_xr, | 
|  | value ? mask_xs : mask_xr); | 
|  | } while (value != hw_ep_get_halt(ci, num, dir)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_is_port_high_speed: test if port is high speed | 
|  | * | 
|  | * This function returns true if high speed port | 
|  | */ | 
|  | static int hw_port_is_high_speed(struct ci13xxx *ci) | 
|  | { | 
|  | return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : | 
|  | hw_read(ci, OP_PORTSC, PORTSC_HSP); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_read_intr_enable: returns interrupt enable register | 
|  | * | 
|  | * This function returns register data | 
|  | */ | 
|  | static u32 hw_read_intr_enable(struct ci13xxx *ci) | 
|  | { | 
|  | return hw_read(ci, OP_USBINTR, ~0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_read_intr_status: returns interrupt status register | 
|  | * | 
|  | * This function returns register data | 
|  | */ | 
|  | static u32 hw_read_intr_status(struct ci13xxx *ci) | 
|  | { | 
|  | return hw_read(ci, OP_USBSTS, ~0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_test_and_clear_complete: test & clear complete status (execute without | 
|  | *                             interruption) | 
|  | * @n: endpoint number | 
|  | * | 
|  | * This function returns complete status | 
|  | */ | 
|  | static int hw_test_and_clear_complete(struct ci13xxx *ci, int n) | 
|  | { | 
|  | n = ep_to_bit(ci, n); | 
|  | return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_test_and_clear_intr_active: test & clear active interrupts (execute | 
|  | *                                without interruption) | 
|  | * | 
|  | * This function returns active interrutps | 
|  | */ | 
|  | static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) | 
|  | { | 
|  | u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); | 
|  |  | 
|  | hw_write(ci, OP_USBSTS, ~0, reg); | 
|  | return reg; | 
|  | } | 
|  |  | 
|  | static void hw_enable_vbus_intr(struct ci13xxx *ci) | 
|  | { | 
|  | hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS); | 
|  | hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE); | 
|  | queue_work(ci->wq, &ci->vbus_work); | 
|  | } | 
|  |  | 
|  | static void hw_disable_vbus_intr(struct ci13xxx *ci) | 
|  | { | 
|  | hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_test_and_clear_setup_guard: test & clear setup guard (execute without | 
|  | *                                interruption) | 
|  | * | 
|  | * This function returns guard value | 
|  | */ | 
|  | static int hw_test_and_clear_setup_guard(struct ci13xxx *ci) | 
|  | { | 
|  | return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_test_and_set_setup_guard: test & set setup guard (execute without | 
|  | *                              interruption) | 
|  | * | 
|  | * This function returns guard value | 
|  | */ | 
|  | static int hw_test_and_set_setup_guard(struct ci13xxx *ci) | 
|  | { | 
|  | return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_usb_set_address: configures USB address (execute without interruption) | 
|  | * @value: new USB address | 
|  | * | 
|  | * This function explicitly sets the address, without the "USBADRA" (advance) | 
|  | * feature, which is not supported by older versions of the controller. | 
|  | */ | 
|  | static void hw_usb_set_address(struct ci13xxx *ci, u8 value) | 
|  | { | 
|  | hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, | 
|  | value << ffs_nr(DEVICEADDR_USBADR)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hw_usb_reset: restart device after a bus reset (execute without | 
|  | *               interruption) | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int hw_usb_reset(struct ci13xxx *ci) | 
|  | { | 
|  | hw_usb_set_address(ci, 0); | 
|  |  | 
|  | /* ESS flushes only at end?!? */ | 
|  | hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0); | 
|  |  | 
|  | /* clear setup token semaphores */ | 
|  | hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0); | 
|  |  | 
|  | /* clear complete status */ | 
|  | hw_write(ci, OP_ENDPTCOMPLETE,  0,  0); | 
|  |  | 
|  | /* wait until all bits cleared */ | 
|  | while (hw_read(ci, OP_ENDPTPRIME, ~0)) | 
|  | udelay(10);             /* not RTOS friendly */ | 
|  |  | 
|  | /* reset all endpoints ? */ | 
|  |  | 
|  | /* reset internal status and wait for further instructions | 
|  | no need to verify the port reset status (ESS does it) */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vbus_work(struct work_struct *work) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work); | 
|  |  | 
|  | if (hw_read(ci, OP_OTGSC, OTGSC_AVV)) | 
|  | usb_gadget_vbus_connect(&ci->gadget); | 
|  | else | 
|  | usb_gadget_vbus_disconnect(&ci->gadget); | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * UTIL block | 
|  | *****************************************************************************/ | 
|  | /** | 
|  | * _usb_addr: calculates endpoint address from direction & number | 
|  | * @ep:  endpoint | 
|  | */ | 
|  | static inline u8 _usb_addr(struct ci13xxx_ep *ep) | 
|  | { | 
|  | return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _hardware_queue: configures a request at hardware level | 
|  | * @gadget: gadget | 
|  | * @mEp:    endpoint | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) | 
|  | { | 
|  | struct ci13xxx *ci = mEp->ci; | 
|  | unsigned i; | 
|  | int ret = 0; | 
|  | unsigned length = mReq->req.length; | 
|  |  | 
|  | /* don't queue twice */ | 
|  | if (mReq->req.status == -EALREADY) | 
|  | return -EALREADY; | 
|  |  | 
|  | mReq->req.status = -EALREADY; | 
|  |  | 
|  | if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) { | 
|  | mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC, | 
|  | &mReq->zdma); | 
|  | if (mReq->zptr == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(mReq->zptr, 0, sizeof(*mReq->zptr)); | 
|  | mReq->zptr->next    = TD_TERMINATE; | 
|  | mReq->zptr->token   = TD_STATUS_ACTIVE; | 
|  | if (!mReq->req.no_interrupt) | 
|  | mReq->zptr->token   |= TD_IOC; | 
|  | } | 
|  | ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * TD configuration | 
|  | * TODO - handle requests which spawns into several TDs | 
|  | */ | 
|  | memset(mReq->ptr, 0, sizeof(*mReq->ptr)); | 
|  | mReq->ptr->token    = length << ffs_nr(TD_TOTAL_BYTES); | 
|  | mReq->ptr->token   &= TD_TOTAL_BYTES; | 
|  | mReq->ptr->token   |= TD_STATUS_ACTIVE; | 
|  | if (mReq->zptr) { | 
|  | mReq->ptr->next    = mReq->zdma; | 
|  | } else { | 
|  | mReq->ptr->next    = TD_TERMINATE; | 
|  | if (!mReq->req.no_interrupt) | 
|  | mReq->ptr->token  |= TD_IOC; | 
|  | } | 
|  | mReq->ptr->page[0]  = mReq->req.dma; | 
|  | for (i = 1; i < 5; i++) | 
|  | mReq->ptr->page[i] = | 
|  | (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; | 
|  |  | 
|  | if (!list_empty(&mEp->qh.queue)) { | 
|  | struct ci13xxx_req *mReqPrev; | 
|  | int n = hw_ep_bit(mEp->num, mEp->dir); | 
|  | int tmp_stat; | 
|  |  | 
|  | mReqPrev = list_entry(mEp->qh.queue.prev, | 
|  | struct ci13xxx_req, queue); | 
|  | if (mReqPrev->zptr) | 
|  | mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK; | 
|  | else | 
|  | mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; | 
|  | wmb(); | 
|  | if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) | 
|  | goto done; | 
|  | do { | 
|  | hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); | 
|  | tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); | 
|  | } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); | 
|  | hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); | 
|  | if (tmp_stat) | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /*  QH configuration */ | 
|  | mEp->qh.ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */ | 
|  | mEp->qh.ptr->td.token &= ~TD_STATUS;   /* clear status */ | 
|  | mEp->qh.ptr->cap |=  QH_ZLT; | 
|  |  | 
|  | wmb();   /* synchronize before ep prime */ | 
|  |  | 
|  | ret = hw_ep_prime(ci, mEp->num, mEp->dir, | 
|  | mEp->type == USB_ENDPOINT_XFER_CONTROL); | 
|  | done: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _hardware_dequeue: handles a request at hardware level | 
|  | * @gadget: gadget | 
|  | * @mEp:    endpoint | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) | 
|  | { | 
|  | if (mReq->req.status != -EALREADY) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (mReq->zptr) { | 
|  | if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0) | 
|  | return -EBUSY; | 
|  | dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); | 
|  | mReq->zptr = NULL; | 
|  | } | 
|  |  | 
|  | mReq->req.status = 0; | 
|  |  | 
|  | usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir); | 
|  |  | 
|  | mReq->req.status = mReq->ptr->token & TD_STATUS; | 
|  | if ((TD_STATUS_HALTED & mReq->req.status) != 0) | 
|  | mReq->req.status = -1; | 
|  | else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) | 
|  | mReq->req.status = -1; | 
|  | else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0) | 
|  | mReq->req.status = -1; | 
|  |  | 
|  | mReq->req.actual   = mReq->ptr->token & TD_TOTAL_BYTES; | 
|  | mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES); | 
|  | mReq->req.actual   = mReq->req.length - mReq->req.actual; | 
|  | mReq->req.actual   = mReq->req.status ? 0 : mReq->req.actual; | 
|  |  | 
|  | return mReq->req.actual; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _ep_nuke: dequeues all endpoint requests | 
|  | * @mEp: endpoint | 
|  | * | 
|  | * This function returns an error code | 
|  | * Caller must hold lock | 
|  | */ | 
|  | static int _ep_nuke(struct ci13xxx_ep *mEp) | 
|  | __releases(mEp->lock) | 
|  | __acquires(mEp->lock) | 
|  | { | 
|  | if (mEp == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | hw_ep_flush(mEp->ci, mEp->num, mEp->dir); | 
|  |  | 
|  | while (!list_empty(&mEp->qh.queue)) { | 
|  |  | 
|  | /* pop oldest request */ | 
|  | struct ci13xxx_req *mReq = \ | 
|  | list_entry(mEp->qh.queue.next, | 
|  | struct ci13xxx_req, queue); | 
|  | list_del_init(&mReq->queue); | 
|  | mReq->req.status = -ESHUTDOWN; | 
|  |  | 
|  | if (mReq->req.complete != NULL) { | 
|  | spin_unlock(mEp->lock); | 
|  | mReq->req.complete(&mEp->ep, &mReq->req); | 
|  | spin_lock(mEp->lock); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts | 
|  | * @gadget: gadget | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int _gadget_stop_activity(struct usb_gadget *gadget) | 
|  | { | 
|  | struct usb_ep *ep; | 
|  | struct ci13xxx    *ci = container_of(gadget, struct ci13xxx, gadget); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  | ci->gadget.speed = USB_SPEED_UNKNOWN; | 
|  | ci->remote_wakeup = 0; | 
|  | ci->suspended = 0; | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  |  | 
|  | /* flush all endpoints */ | 
|  | gadget_for_each_ep(ep, gadget) { | 
|  | usb_ep_fifo_flush(ep); | 
|  | } | 
|  | usb_ep_fifo_flush(&ci->ep0out->ep); | 
|  | usb_ep_fifo_flush(&ci->ep0in->ep); | 
|  |  | 
|  | if (ci->driver) | 
|  | ci->driver->disconnect(gadget); | 
|  |  | 
|  | /* make sure to disable all endpoints */ | 
|  | gadget_for_each_ep(ep, gadget) { | 
|  | usb_ep_disable(ep); | 
|  | } | 
|  |  | 
|  | if (ci->status != NULL) { | 
|  | usb_ep_free_request(&ci->ep0in->ep, ci->status); | 
|  | ci->status = NULL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * ISR block | 
|  | *****************************************************************************/ | 
|  | /** | 
|  | * isr_reset_handler: USB reset interrupt handler | 
|  | * @ci: UDC device | 
|  | * | 
|  | * This function resets USB engine after a bus reset occurred | 
|  | */ | 
|  | static void isr_reset_handler(struct ci13xxx *ci) | 
|  | __releases(ci->lock) | 
|  | __acquires(ci->lock) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | dbg_event(0xFF, "BUS RST", 0); | 
|  |  | 
|  | spin_unlock(&ci->lock); | 
|  | retval = _gadget_stop_activity(&ci->gadget); | 
|  | if (retval) | 
|  | goto done; | 
|  |  | 
|  | retval = hw_usb_reset(ci); | 
|  | if (retval) | 
|  | goto done; | 
|  |  | 
|  | ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); | 
|  | if (ci->status == NULL) | 
|  | retval = -ENOMEM; | 
|  |  | 
|  | done: | 
|  | spin_lock(&ci->lock); | 
|  |  | 
|  | if (retval) | 
|  | dev_err(ci->dev, "error: %i\n", retval); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_get_status_complete: get_status request complete function | 
|  | * @ep:  endpoint | 
|  | * @req: request handled | 
|  | * | 
|  | * Caller must release lock | 
|  | */ | 
|  | static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | if (ep == NULL || req == NULL) | 
|  | return; | 
|  |  | 
|  | kfree(req->buf); | 
|  | usb_ep_free_request(ep, req); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_get_status_response: get_status request response | 
|  | * @ci: ci struct | 
|  | * @setup: setup request packet | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int isr_get_status_response(struct ci13xxx *ci, | 
|  | struct usb_ctrlrequest *setup) | 
|  | __releases(mEp->lock) | 
|  | __acquires(mEp->lock) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = ci->ep0in; | 
|  | struct usb_request *req = NULL; | 
|  | gfp_t gfp_flags = GFP_ATOMIC; | 
|  | int dir, num, retval; | 
|  |  | 
|  | if (mEp == NULL || setup == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_unlock(mEp->lock); | 
|  | req = usb_ep_alloc_request(&mEp->ep, gfp_flags); | 
|  | spin_lock(mEp->lock); | 
|  | if (req == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | req->complete = isr_get_status_complete; | 
|  | req->length   = 2; | 
|  | req->buf      = kzalloc(req->length, gfp_flags); | 
|  | if (req->buf == NULL) { | 
|  | retval = -ENOMEM; | 
|  | goto err_free_req; | 
|  | } | 
|  |  | 
|  | if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { | 
|  | /* Assume that device is bus powered for now. */ | 
|  | *(u16 *)req->buf = ci->remote_wakeup << 1; | 
|  | retval = 0; | 
|  | } else if ((setup->bRequestType & USB_RECIP_MASK) \ | 
|  | == USB_RECIP_ENDPOINT) { | 
|  | dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? | 
|  | TX : RX; | 
|  | num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; | 
|  | *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); | 
|  | } | 
|  | /* else do nothing; reserved for future use */ | 
|  |  | 
|  | spin_unlock(mEp->lock); | 
|  | retval = usb_ep_queue(&mEp->ep, req, gfp_flags); | 
|  | spin_lock(mEp->lock); | 
|  | if (retval) | 
|  | goto err_free_buf; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_buf: | 
|  | kfree(req->buf); | 
|  | err_free_req: | 
|  | spin_unlock(mEp->lock); | 
|  | usb_ep_free_request(&mEp->ep, req); | 
|  | spin_lock(mEp->lock); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_setup_status_complete: setup_status request complete function | 
|  | * @ep:  endpoint | 
|  | * @req: request handled | 
|  | * | 
|  | * Caller must release lock. Put the port in test mode if test mode | 
|  | * feature is selected. | 
|  | */ | 
|  | static void | 
|  | isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | struct ci13xxx *ci = req->context; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ci->setaddr) { | 
|  | hw_usb_set_address(ci, ci->address); | 
|  | ci->setaddr = false; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  | if (ci->test_mode) | 
|  | hw_port_test_set(ci, ci->test_mode); | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_setup_status_phase: queues the status phase of a setup transation | 
|  | * @ci: ci struct | 
|  | * | 
|  | * This function returns an error code | 
|  | */ | 
|  | static int isr_setup_status_phase(struct ci13xxx *ci) | 
|  | __releases(mEp->lock) | 
|  | __acquires(mEp->lock) | 
|  | { | 
|  | int retval; | 
|  | struct ci13xxx_ep *mEp; | 
|  |  | 
|  | mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; | 
|  | ci->status->context = ci; | 
|  | ci->status->complete = isr_setup_status_complete; | 
|  |  | 
|  | spin_unlock(mEp->lock); | 
|  | retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC); | 
|  | spin_lock(mEp->lock); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_tr_complete_low: transaction complete low level handler | 
|  | * @mEp: endpoint | 
|  | * | 
|  | * This function returns an error code | 
|  | * Caller must hold lock | 
|  | */ | 
|  | static int isr_tr_complete_low(struct ci13xxx_ep *mEp) | 
|  | __releases(mEp->lock) | 
|  | __acquires(mEp->lock) | 
|  | { | 
|  | struct ci13xxx_req *mReq, *mReqTemp; | 
|  | struct ci13xxx_ep *mEpTemp = mEp; | 
|  | int retval = 0; | 
|  |  | 
|  | list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, | 
|  | queue) { | 
|  | retval = _hardware_dequeue(mEp, mReq); | 
|  | if (retval < 0) | 
|  | break; | 
|  | list_del_init(&mReq->queue); | 
|  | dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); | 
|  | if (mReq->req.complete != NULL) { | 
|  | spin_unlock(mEp->lock); | 
|  | if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && | 
|  | mReq->req.length) | 
|  | mEpTemp = mEp->ci->ep0in; | 
|  | mReq->req.complete(&mEpTemp->ep, &mReq->req); | 
|  | spin_lock(mEp->lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (retval == -EBUSY) | 
|  | retval = 0; | 
|  | if (retval < 0) | 
|  | dbg_event(_usb_addr(mEp), "DONE", retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * isr_tr_complete_handler: transaction complete interrupt handler | 
|  | * @ci: UDC descriptor | 
|  | * | 
|  | * This function handles traffic events | 
|  | */ | 
|  | static void isr_tr_complete_handler(struct ci13xxx *ci) | 
|  | __releases(ci->lock) | 
|  | __acquires(ci->lock) | 
|  | { | 
|  | unsigned i; | 
|  | u8 tmode = 0; | 
|  |  | 
|  | for (i = 0; i < ci->hw_ep_max; i++) { | 
|  | struct ci13xxx_ep *mEp  = &ci->ci13xxx_ep[i]; | 
|  | int type, num, dir, err = -EINVAL; | 
|  | struct usb_ctrlrequest req; | 
|  |  | 
|  | if (mEp->ep.desc == NULL) | 
|  | continue;   /* not configured */ | 
|  |  | 
|  | if (hw_test_and_clear_complete(ci, i)) { | 
|  | err = isr_tr_complete_low(mEp); | 
|  | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { | 
|  | if (err > 0)   /* needs status phase */ | 
|  | err = isr_setup_status_phase(ci); | 
|  | if (err < 0) { | 
|  | dbg_event(_usb_addr(mEp), | 
|  | "ERROR", err); | 
|  | spin_unlock(&ci->lock); | 
|  | if (usb_ep_set_halt(&mEp->ep)) | 
|  | dev_err(ci->dev, | 
|  | "error: ep_set_halt\n"); | 
|  | spin_lock(&ci->lock); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (mEp->type != USB_ENDPOINT_XFER_CONTROL || | 
|  | !hw_test_and_clear_setup_status(ci, i)) | 
|  | continue; | 
|  |  | 
|  | if (i != 0) { | 
|  | dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Flush data and handshake transactions of previous | 
|  | * setup packet. | 
|  | */ | 
|  | _ep_nuke(ci->ep0out); | 
|  | _ep_nuke(ci->ep0in); | 
|  |  | 
|  | /* read_setup_packet */ | 
|  | do { | 
|  | hw_test_and_set_setup_guard(ci); | 
|  | memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); | 
|  | } while (!hw_test_and_clear_setup_guard(ci)); | 
|  |  | 
|  | type = req.bRequestType; | 
|  |  | 
|  | ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; | 
|  |  | 
|  | dbg_setup(_usb_addr(mEp), &req); | 
|  |  | 
|  | switch (req.bRequest) { | 
|  | case USB_REQ_CLEAR_FEATURE: | 
|  | if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && | 
|  | le16_to_cpu(req.wValue) == | 
|  | USB_ENDPOINT_HALT) { | 
|  | if (req.wLength != 0) | 
|  | break; | 
|  | num  = le16_to_cpu(req.wIndex); | 
|  | dir = num & USB_ENDPOINT_DIR_MASK; | 
|  | num &= USB_ENDPOINT_NUMBER_MASK; | 
|  | if (dir) /* TX */ | 
|  | num += ci->hw_ep_max/2; | 
|  | if (!ci->ci13xxx_ep[num].wedge) { | 
|  | spin_unlock(&ci->lock); | 
|  | err = usb_ep_clear_halt( | 
|  | &ci->ci13xxx_ep[num].ep); | 
|  | spin_lock(&ci->lock); | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  | err = isr_setup_status_phase(ci); | 
|  | } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && | 
|  | le16_to_cpu(req.wValue) == | 
|  | USB_DEVICE_REMOTE_WAKEUP) { | 
|  | if (req.wLength != 0) | 
|  | break; | 
|  | ci->remote_wakeup = 0; | 
|  | err = isr_setup_status_phase(ci); | 
|  | } else { | 
|  | goto delegate; | 
|  | } | 
|  | break; | 
|  | case USB_REQ_GET_STATUS: | 
|  | if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   && | 
|  | type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && | 
|  | type != (USB_DIR_IN|USB_RECIP_INTERFACE)) | 
|  | goto delegate; | 
|  | if (le16_to_cpu(req.wLength) != 2 || | 
|  | le16_to_cpu(req.wValue)  != 0) | 
|  | break; | 
|  | err = isr_get_status_response(ci, &req); | 
|  | break; | 
|  | case USB_REQ_SET_ADDRESS: | 
|  | if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) | 
|  | goto delegate; | 
|  | if (le16_to_cpu(req.wLength) != 0 || | 
|  | le16_to_cpu(req.wIndex)  != 0) | 
|  | break; | 
|  | ci->address = (u8)le16_to_cpu(req.wValue); | 
|  | ci->setaddr = true; | 
|  | err = isr_setup_status_phase(ci); | 
|  | break; | 
|  | case USB_REQ_SET_FEATURE: | 
|  | if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && | 
|  | le16_to_cpu(req.wValue) == | 
|  | USB_ENDPOINT_HALT) { | 
|  | if (req.wLength != 0) | 
|  | break; | 
|  | num  = le16_to_cpu(req.wIndex); | 
|  | dir = num & USB_ENDPOINT_DIR_MASK; | 
|  | num &= USB_ENDPOINT_NUMBER_MASK; | 
|  | if (dir) /* TX */ | 
|  | num += ci->hw_ep_max/2; | 
|  |  | 
|  | spin_unlock(&ci->lock); | 
|  | err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep); | 
|  | spin_lock(&ci->lock); | 
|  | if (!err) | 
|  | isr_setup_status_phase(ci); | 
|  | } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { | 
|  | if (req.wLength != 0) | 
|  | break; | 
|  | switch (le16_to_cpu(req.wValue)) { | 
|  | case USB_DEVICE_REMOTE_WAKEUP: | 
|  | ci->remote_wakeup = 1; | 
|  | err = isr_setup_status_phase(ci); | 
|  | break; | 
|  | case USB_DEVICE_TEST_MODE: | 
|  | tmode = le16_to_cpu(req.wIndex) >> 8; | 
|  | switch (tmode) { | 
|  | case TEST_J: | 
|  | case TEST_K: | 
|  | case TEST_SE0_NAK: | 
|  | case TEST_PACKET: | 
|  | case TEST_FORCE_EN: | 
|  | ci->test_mode = tmode; | 
|  | err = isr_setup_status_phase( | 
|  | ci); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | default: | 
|  | goto delegate; | 
|  | } | 
|  | } else { | 
|  | goto delegate; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | delegate: | 
|  | if (req.wLength == 0)   /* no data phase */ | 
|  | ci->ep0_dir = TX; | 
|  |  | 
|  | spin_unlock(&ci->lock); | 
|  | err = ci->driver->setup(&ci->gadget, &req); | 
|  | spin_lock(&ci->lock); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (err < 0) { | 
|  | dbg_event(_usb_addr(mEp), "ERROR", err); | 
|  |  | 
|  | spin_unlock(&ci->lock); | 
|  | if (usb_ep_set_halt(&mEp->ep)) | 
|  | dev_err(ci->dev, "error: ep_set_halt\n"); | 
|  | spin_lock(&ci->lock); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * ENDPT block | 
|  | *****************************************************************************/ | 
|  | /** | 
|  | * ep_enable: configure endpoint, making it usable | 
|  | * | 
|  | * Check usb_ep_enable() at "usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_enable(struct usb_ep *ep, | 
|  | const struct usb_endpoint_descriptor *desc) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); | 
|  | int retval = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || desc == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | /* only internal SW should enable ctrl endpts */ | 
|  |  | 
|  | mEp->ep.desc = desc; | 
|  |  | 
|  | if (!list_empty(&mEp->qh.queue)) | 
|  | dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n"); | 
|  |  | 
|  | mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX; | 
|  | mEp->num  = usb_endpoint_num(desc); | 
|  | mEp->type = usb_endpoint_type(desc); | 
|  |  | 
|  | mEp->ep.maxpacket = usb_endpoint_maxp(desc); | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "ENABLE", 0); | 
|  |  | 
|  | mEp->qh.ptr->cap = 0; | 
|  |  | 
|  | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) | 
|  | mEp->qh.ptr->cap |=  QH_IOS; | 
|  | else if (mEp->type == USB_ENDPOINT_XFER_ISOC) | 
|  | mEp->qh.ptr->cap &= ~QH_MULT; | 
|  | else | 
|  | mEp->qh.ptr->cap &= ~QH_ZLT; | 
|  |  | 
|  | mEp->qh.ptr->cap |= | 
|  | (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; | 
|  | mEp->qh.ptr->td.next |= TD_TERMINATE;   /* needed? */ | 
|  |  | 
|  | /* | 
|  | * Enable endpoints in the HW other than ep0 as ep0 | 
|  | * is always enabled | 
|  | */ | 
|  | if (mEp->num) | 
|  | retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type); | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_disable: endpoint is no longer usable | 
|  | * | 
|  | * Check usb_ep_disable() at "usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_disable(struct usb_ep *ep) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); | 
|  | int direction, retval = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL) | 
|  | return -EINVAL; | 
|  | else if (mEp->ep.desc == NULL) | 
|  | return -EBUSY; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | /* only internal SW should disable ctrl endpts */ | 
|  |  | 
|  | direction = mEp->dir; | 
|  | do { | 
|  | dbg_event(_usb_addr(mEp), "DISABLE", 0); | 
|  |  | 
|  | retval |= _ep_nuke(mEp); | 
|  | retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir); | 
|  |  | 
|  | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) | 
|  | mEp->dir = (mEp->dir == TX) ? RX : TX; | 
|  |  | 
|  | } while (mEp->dir != direction); | 
|  |  | 
|  | mEp->ep.desc = NULL; | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_alloc_request: allocate a request object to use with this endpoint | 
|  | * | 
|  | * Check usb_ep_alloc_request() at "usb_gadget.h" for details | 
|  | */ | 
|  | static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) | 
|  | { | 
|  | struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep); | 
|  | struct ci13xxx_req *mReq = NULL; | 
|  |  | 
|  | if (ep == NULL) | 
|  | return NULL; | 
|  |  | 
|  | mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); | 
|  | if (mReq != NULL) { | 
|  | INIT_LIST_HEAD(&mReq->queue); | 
|  |  | 
|  | mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, | 
|  | &mReq->dma); | 
|  | if (mReq->ptr == NULL) { | 
|  | kfree(mReq); | 
|  | mReq = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL); | 
|  |  | 
|  | return (mReq == NULL) ? NULL : &mReq->req; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_free_request: frees a request object | 
|  | * | 
|  | * Check usb_ep_free_request() at "usb_gadget.h" for details | 
|  | */ | 
|  | static void ep_free_request(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep); | 
|  | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || req == NULL) { | 
|  | return; | 
|  | } else if (!list_empty(&mReq->queue)) { | 
|  | dev_err(mEp->ci->dev, "freeing queued request\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | if (mReq->ptr) | 
|  | dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma); | 
|  | kfree(mReq); | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "FREE", 0); | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_queue: queues (submits) an I/O request to an endpoint | 
|  | * | 
|  | * Check usb_ep_queue()* at usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_queue(struct usb_ep *ep, struct usb_request *req, | 
|  | gfp_t __maybe_unused gfp_flags) | 
|  | { | 
|  | struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep); | 
|  | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); | 
|  | struct ci13xxx *ci = mEp->ci; | 
|  | int retval = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || req == NULL || mEp->ep.desc == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { | 
|  | if (req->length) | 
|  | mEp = (ci->ep0_dir == RX) ? | 
|  | ci->ep0out : ci->ep0in; | 
|  | if (!list_empty(&mEp->qh.queue)) { | 
|  | _ep_nuke(mEp); | 
|  | retval = -EOVERFLOW; | 
|  | dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n", | 
|  | _usb_addr(mEp)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* first nuke then test link, e.g. previous status has not sent */ | 
|  | if (!list_empty(&mReq->queue)) { | 
|  | retval = -EBUSY; | 
|  | dev_err(mEp->ci->dev, "request already in queue\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (req->length > 4 * CI13XXX_PAGE_SIZE) { | 
|  | req->length = 4 * CI13XXX_PAGE_SIZE; | 
|  | retval = -EMSGSIZE; | 
|  | dev_warn(mEp->ci->dev, "request length truncated\n"); | 
|  | } | 
|  |  | 
|  | dbg_queue(_usb_addr(mEp), req, retval); | 
|  |  | 
|  | /* push request */ | 
|  | mReq->req.status = -EINPROGRESS; | 
|  | mReq->req.actual = 0; | 
|  |  | 
|  | retval = _hardware_enqueue(mEp, mReq); | 
|  |  | 
|  | if (retval == -EALREADY) { | 
|  | dbg_event(_usb_addr(mEp), "QUEUE", retval); | 
|  | retval = 0; | 
|  | } | 
|  | if (!retval) | 
|  | list_add_tail(&mReq->queue, &mEp->qh.queue); | 
|  |  | 
|  | done: | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint | 
|  | * | 
|  | * Check usb_ep_dequeue() at "usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep); | 
|  | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || | 
|  | mEp->ep.desc == NULL || list_empty(&mReq->queue) || | 
|  | list_empty(&mEp->qh.queue)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "DEQUEUE", 0); | 
|  |  | 
|  | hw_ep_flush(mEp->ci, mEp->num, mEp->dir); | 
|  |  | 
|  | /* pop request */ | 
|  | list_del_init(&mReq->queue); | 
|  |  | 
|  | usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir); | 
|  |  | 
|  | req->status = -ECONNRESET; | 
|  |  | 
|  | if (mReq->req.complete != NULL) { | 
|  | spin_unlock(mEp->lock); | 
|  | mReq->req.complete(&mEp->ep, &mReq->req); | 
|  | spin_lock(mEp->lock); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_set_halt: sets the endpoint halt feature | 
|  | * | 
|  | * Check usb_ep_set_halt() at "usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_set_halt(struct usb_ep *ep, int value) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); | 
|  | int direction, retval = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || mEp->ep.desc == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | #ifndef STALL_IN | 
|  | /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ | 
|  | if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && | 
|  | !list_empty(&mEp->qh.queue)) { | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return -EAGAIN; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | direction = mEp->dir; | 
|  | do { | 
|  | dbg_event(_usb_addr(mEp), "HALT", value); | 
|  | retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value); | 
|  |  | 
|  | if (!value) | 
|  | mEp->wedge = 0; | 
|  |  | 
|  | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) | 
|  | mEp->dir = (mEp->dir == TX) ? RX : TX; | 
|  |  | 
|  | } while (mEp->dir != direction); | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_set_wedge: sets the halt feature and ignores clear requests | 
|  | * | 
|  | * Check usb_ep_set_wedge() at "usb_gadget.h" for details | 
|  | */ | 
|  | static int ep_set_wedge(struct usb_ep *ep) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL || mEp->ep.desc == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "WEDGE", 0); | 
|  | mEp->wedge = 1; | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  |  | 
|  | return usb_ep_set_halt(ep); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ep_fifo_flush: flushes contents of a fifo | 
|  | * | 
|  | * Check usb_ep_fifo_flush() at "usb_gadget.h" for details | 
|  | */ | 
|  | static void ep_fifo_flush(struct usb_ep *ep) | 
|  | { | 
|  | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ep == NULL) { | 
|  | dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(mEp->lock, flags); | 
|  |  | 
|  | dbg_event(_usb_addr(mEp), "FFLUSH", 0); | 
|  | hw_ep_flush(mEp->ci, mEp->num, mEp->dir); | 
|  |  | 
|  | spin_unlock_irqrestore(mEp->lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Endpoint-specific part of the API to the USB controller hardware | 
|  | * Check "usb_gadget.h" for details | 
|  | */ | 
|  | static const struct usb_ep_ops usb_ep_ops = { | 
|  | .enable	       = ep_enable, | 
|  | .disable       = ep_disable, | 
|  | .alloc_request = ep_alloc_request, | 
|  | .free_request  = ep_free_request, | 
|  | .queue	       = ep_queue, | 
|  | .dequeue       = ep_dequeue, | 
|  | .set_halt      = ep_set_halt, | 
|  | .set_wedge     = ep_set_wedge, | 
|  | .fifo_flush    = ep_fifo_flush, | 
|  | }; | 
|  |  | 
|  | /****************************************************************************** | 
|  | * GADGET block | 
|  | *****************************************************************************/ | 
|  | static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); | 
|  | unsigned long flags; | 
|  | int gadget_ready = 0; | 
|  |  | 
|  | if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  | ci->vbus_active = is_active; | 
|  | if (ci->driver) | 
|  | gadget_ready = 1; | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  |  | 
|  | if (gadget_ready) { | 
|  | if (is_active) { | 
|  | pm_runtime_get_sync(&_gadget->dev); | 
|  | hw_device_reset(ci, USBMODE_CM_DC); | 
|  | hw_enable_vbus_intr(ci); | 
|  | hw_device_state(ci, ci->ep0out->qh.dma); | 
|  | } else { | 
|  | hw_device_state(ci, 0); | 
|  | if (ci->platdata->notify_event) | 
|  | ci->platdata->notify_event(ci, | 
|  | CI13XXX_CONTROLLER_STOPPED_EVENT); | 
|  | _gadget_stop_activity(&ci->gadget); | 
|  | pm_runtime_put_sync(&_gadget->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ci13xxx_wakeup(struct usb_gadget *_gadget) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  |  | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  | if (!ci->remote_wakeup) { | 
|  | ret = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  | if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); | 
|  | out: | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); | 
|  |  | 
|  | if (ci->transceiver) | 
|  | return usb_phy_set_power(ci->transceiver, mA); | 
|  | return -ENOTSUPP; | 
|  | } | 
|  |  | 
|  | /* Change Data+ pullup status | 
|  | * this func is used by usb_gadget_connect/disconnet | 
|  | */ | 
|  | static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); | 
|  |  | 
|  | if (is_on) | 
|  | hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); | 
|  | else | 
|  | hw_write(ci, OP_USBCMD, USBCMD_RS, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ci13xxx_start(struct usb_gadget *gadget, | 
|  | struct usb_gadget_driver *driver); | 
|  | static int ci13xxx_stop(struct usb_gadget *gadget, | 
|  | struct usb_gadget_driver *driver); | 
|  | /** | 
|  | * Device operations part of the API to the USB controller hardware, | 
|  | * which don't involve endpoints (or i/o) | 
|  | * Check  "usb_gadget.h" for details | 
|  | */ | 
|  | static const struct usb_gadget_ops usb_gadget_ops = { | 
|  | .vbus_session	= ci13xxx_vbus_session, | 
|  | .wakeup		= ci13xxx_wakeup, | 
|  | .pullup		= ci13xxx_pullup, | 
|  | .vbus_draw	= ci13xxx_vbus_draw, | 
|  | .udc_start	= ci13xxx_start, | 
|  | .udc_stop	= ci13xxx_stop, | 
|  | }; | 
|  |  | 
|  | static int init_eps(struct ci13xxx *ci) | 
|  | { | 
|  | int retval = 0, i, j; | 
|  |  | 
|  | for (i = 0; i < ci->hw_ep_max/2; i++) | 
|  | for (j = RX; j <= TX; j++) { | 
|  | int k = i + j * ci->hw_ep_max/2; | 
|  | struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k]; | 
|  |  | 
|  | scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, | 
|  | (j == TX)  ? "in" : "out"); | 
|  |  | 
|  | mEp->ci          = ci; | 
|  | mEp->lock         = &ci->lock; | 
|  | mEp->td_pool      = ci->td_pool; | 
|  |  | 
|  | mEp->ep.name      = mEp->name; | 
|  | mEp->ep.ops       = &usb_ep_ops; | 
|  | /* | 
|  | * for ep0: maxP defined in desc, for other | 
|  | * eps, maxP is set by epautoconfig() called | 
|  | * by gadget layer | 
|  | */ | 
|  | mEp->ep.maxpacket = (unsigned short)~0; | 
|  |  | 
|  | INIT_LIST_HEAD(&mEp->qh.queue); | 
|  | mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, | 
|  | &mEp->qh.dma); | 
|  | if (mEp->qh.ptr == NULL) | 
|  | retval = -ENOMEM; | 
|  | else | 
|  | memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); | 
|  |  | 
|  | /* | 
|  | * set up shorthands for ep0 out and in endpoints, | 
|  | * don't add to gadget's ep_list | 
|  | */ | 
|  | if (i == 0) { | 
|  | if (j == RX) | 
|  | ci->ep0out = mEp; | 
|  | else | 
|  | ci->ep0in = mEp; | 
|  |  | 
|  | mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list); | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void destroy_eps(struct ci13xxx *ci) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ci->hw_ep_max; i++) { | 
|  | struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; | 
|  |  | 
|  | dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ci13xxx_start: register a gadget driver | 
|  | * @gadget: our gadget | 
|  | * @driver: the driver being registered | 
|  | * | 
|  | * Interrupts are enabled here. | 
|  | */ | 
|  | static int ci13xxx_start(struct usb_gadget *gadget, | 
|  | struct usb_gadget_driver *driver) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); | 
|  | unsigned long flags; | 
|  | int retval = -ENOMEM; | 
|  |  | 
|  | if (driver->disconnect == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  |  | 
|  | ci->ep0out->ep.desc = &ctrl_endpt_out_desc; | 
|  | retval = usb_ep_enable(&ci->ep0out->ep); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | ci->ep0in->ep.desc = &ctrl_endpt_in_desc; | 
|  | retval = usb_ep_enable(&ci->ep0in->ep); | 
|  | if (retval) | 
|  | return retval; | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  |  | 
|  | ci->driver = driver; | 
|  | pm_runtime_get_sync(&ci->gadget.dev); | 
|  | if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { | 
|  | if (ci->vbus_active) { | 
|  | if (ci->platdata->flags & CI13XXX_REGS_SHARED) { | 
|  | hw_device_reset(ci, USBMODE_CM_DC); | 
|  | hw_enable_vbus_intr(ci); | 
|  | } | 
|  | } else { | 
|  | pm_runtime_put_sync(&ci->gadget.dev); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  |  | 
|  | retval = hw_device_state(ci, ci->ep0out->qh.dma); | 
|  | if (retval) | 
|  | pm_runtime_put_sync(&ci->gadget.dev); | 
|  |  | 
|  | done: | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ci13xxx_stop: unregister a gadget driver | 
|  | */ | 
|  | static int ci13xxx_stop(struct usb_gadget *gadget, | 
|  | struct usb_gadget_driver *driver) | 
|  | { | 
|  | struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  |  | 
|  | if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) || | 
|  | ci->vbus_active) { | 
|  | hw_device_state(ci, 0); | 
|  | if (ci->platdata->notify_event) | 
|  | ci->platdata->notify_event(ci, | 
|  | CI13XXX_CONTROLLER_STOPPED_EVENT); | 
|  | ci->driver = NULL; | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  | _gadget_stop_activity(&ci->gadget); | 
|  | spin_lock_irqsave(&ci->lock, flags); | 
|  | pm_runtime_put(&ci->gadget.dev); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&ci->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * BUS block | 
|  | *****************************************************************************/ | 
|  | /** | 
|  | * udc_irq: ci interrupt handler | 
|  | * | 
|  | * This function returns IRQ_HANDLED if the IRQ has been handled | 
|  | * It locks access to registers | 
|  | */ | 
|  | static irqreturn_t udc_irq(struct ci13xxx *ci) | 
|  | { | 
|  | irqreturn_t retval; | 
|  | u32 intr; | 
|  |  | 
|  | if (ci == NULL) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | spin_lock(&ci->lock); | 
|  |  | 
|  | if (ci->platdata->flags & CI13XXX_REGS_SHARED) { | 
|  | if (hw_read(ci, OP_USBMODE, USBMODE_CM) != | 
|  | USBMODE_CM_DC) { | 
|  | spin_unlock(&ci->lock); | 
|  | return IRQ_NONE; | 
|  | } | 
|  | } | 
|  | intr = hw_test_and_clear_intr_active(ci); | 
|  | dbg_interrupt(intr); | 
|  |  | 
|  | if (intr) { | 
|  | /* order defines priority - do NOT change it */ | 
|  | if (USBi_URI & intr) | 
|  | isr_reset_handler(ci); | 
|  |  | 
|  | if (USBi_PCI & intr) { | 
|  | ci->gadget.speed = hw_port_is_high_speed(ci) ? | 
|  | USB_SPEED_HIGH : USB_SPEED_FULL; | 
|  | if (ci->suspended && ci->driver->resume) { | 
|  | spin_unlock(&ci->lock); | 
|  | ci->driver->resume(&ci->gadget); | 
|  | spin_lock(&ci->lock); | 
|  | ci->suspended = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (USBi_UI  & intr) | 
|  | isr_tr_complete_handler(ci); | 
|  |  | 
|  | if (USBi_SLI & intr) { | 
|  | if (ci->gadget.speed != USB_SPEED_UNKNOWN && | 
|  | ci->driver->suspend) { | 
|  | ci->suspended = 1; | 
|  | spin_unlock(&ci->lock); | 
|  | ci->driver->suspend(&ci->gadget); | 
|  | spin_lock(&ci->lock); | 
|  | } | 
|  | } | 
|  | retval = IRQ_HANDLED; | 
|  | } else { | 
|  | retval = IRQ_NONE; | 
|  | } | 
|  |  | 
|  | intr = hw_read(ci, OP_OTGSC, ~0); | 
|  | hw_write(ci, OP_OTGSC, ~0, intr); | 
|  |  | 
|  | if (intr & (OTGSC_AVVIE & OTGSC_AVVIS)) | 
|  | queue_work(ci->wq, &ci->vbus_work); | 
|  |  | 
|  | spin_unlock(&ci->lock); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * udc_release: driver release function | 
|  | * @dev: device | 
|  | * | 
|  | * Currently does nothing | 
|  | */ | 
|  | static void udc_release(struct device *dev) | 
|  | { | 
|  | } | 
|  |  | 
|  | /** | 
|  | * udc_start: initialize gadget role | 
|  | * @ci: chipidea controller | 
|  | */ | 
|  | static int udc_start(struct ci13xxx *ci) | 
|  | { | 
|  | struct device *dev = ci->dev; | 
|  | int retval = 0; | 
|  |  | 
|  | spin_lock_init(&ci->lock); | 
|  |  | 
|  | ci->gadget.ops          = &usb_gadget_ops; | 
|  | ci->gadget.speed        = USB_SPEED_UNKNOWN; | 
|  | ci->gadget.max_speed    = USB_SPEED_HIGH; | 
|  | ci->gadget.is_otg       = 0; | 
|  | ci->gadget.name         = ci->platdata->name; | 
|  |  | 
|  | INIT_LIST_HEAD(&ci->gadget.ep_list); | 
|  |  | 
|  | dev_set_name(&ci->gadget.dev, "gadget"); | 
|  | ci->gadget.dev.dma_mask = dev->dma_mask; | 
|  | ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; | 
|  | ci->gadget.dev.parent   = dev; | 
|  | ci->gadget.dev.release  = udc_release; | 
|  |  | 
|  | /* alloc resources */ | 
|  | ci->qh_pool = dma_pool_create("ci13xxx_qh", dev, | 
|  | sizeof(struct ci13xxx_qh), | 
|  | 64, CI13XXX_PAGE_SIZE); | 
|  | if (ci->qh_pool == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ci->td_pool = dma_pool_create("ci13xxx_td", dev, | 
|  | sizeof(struct ci13xxx_td), | 
|  | 64, CI13XXX_PAGE_SIZE); | 
|  | if (ci->td_pool == NULL) { | 
|  | retval = -ENOMEM; | 
|  | goto free_qh_pool; | 
|  | } | 
|  |  | 
|  | retval = init_eps(ci); | 
|  | if (retval) | 
|  | goto free_pools; | 
|  |  | 
|  | ci->gadget.ep0 = &ci->ep0in->ep; | 
|  |  | 
|  | if (ci->global_phy) | 
|  | ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); | 
|  |  | 
|  | if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { | 
|  | if (ci->transceiver == NULL) { | 
|  | retval = -ENODEV; | 
|  | goto destroy_eps; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) { | 
|  | retval = hw_device_reset(ci, USBMODE_CM_DC); | 
|  | if (retval) | 
|  | goto put_transceiver; | 
|  | hw_enable_vbus_intr(ci); | 
|  | } | 
|  |  | 
|  | retval = device_register(&ci->gadget.dev); | 
|  | if (retval) { | 
|  | put_device(&ci->gadget.dev); | 
|  | goto put_transceiver; | 
|  | } | 
|  |  | 
|  | retval = dbg_create_files(&ci->gadget.dev); | 
|  | if (retval) | 
|  | goto unreg_device; | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(ci->transceiver)) { | 
|  | retval = otg_set_peripheral(ci->transceiver->otg, | 
|  | &ci->gadget); | 
|  | if (retval) | 
|  | goto remove_dbg; | 
|  | } | 
|  |  | 
|  | retval = usb_add_gadget_udc(dev, &ci->gadget); | 
|  | if (retval) | 
|  | goto remove_trans; | 
|  |  | 
|  | pm_runtime_no_callbacks(&ci->gadget.dev); | 
|  | pm_runtime_enable(&ci->gadget.dev); | 
|  |  | 
|  | return retval; | 
|  |  | 
|  | remove_trans: | 
|  | if (!IS_ERR_OR_NULL(ci->transceiver)) { | 
|  | otg_set_peripheral(ci->transceiver->otg, NULL); | 
|  | if (ci->global_phy) | 
|  | usb_put_phy(ci->transceiver); | 
|  | } | 
|  |  | 
|  | dev_err(dev, "error = %i\n", retval); | 
|  | remove_dbg: | 
|  | dbg_remove_files(&ci->gadget.dev); | 
|  | unreg_device: | 
|  | device_unregister(&ci->gadget.dev); | 
|  | put_transceiver: | 
|  | if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) | 
|  | usb_put_phy(ci->transceiver); | 
|  | destroy_eps: | 
|  | destroy_eps(ci); | 
|  | free_pools: | 
|  | dma_pool_destroy(ci->td_pool); | 
|  | free_qh_pool: | 
|  | dma_pool_destroy(ci->qh_pool); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * udc_remove: parent remove must call this to remove UDC | 
|  | * | 
|  | * No interrupts active, the IRQ has been released | 
|  | */ | 
|  | static void udc_stop(struct ci13xxx *ci) | 
|  | { | 
|  | if (ci == NULL) | 
|  | return; | 
|  |  | 
|  | hw_disable_vbus_intr(ci); | 
|  | cancel_work_sync(&ci->vbus_work); | 
|  |  | 
|  | usb_del_gadget_udc(&ci->gadget); | 
|  |  | 
|  | destroy_eps(ci); | 
|  |  | 
|  | dma_pool_destroy(ci->td_pool); | 
|  | dma_pool_destroy(ci->qh_pool); | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(ci->transceiver)) { | 
|  | otg_set_peripheral(ci->transceiver->otg, NULL); | 
|  | if (ci->global_phy) | 
|  | usb_put_phy(ci->transceiver); | 
|  | } | 
|  | dbg_remove_files(&ci->gadget.dev); | 
|  | device_unregister(&ci->gadget.dev); | 
|  | /* my kobject is dynamic, I swear! */ | 
|  | memset(&ci->gadget, 0, sizeof(ci->gadget)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ci_hdrc_gadget_init - initialize device related bits | 
|  | * ci: the controller | 
|  | * | 
|  | * This function enables the gadget role, if the device is "device capable". | 
|  | */ | 
|  | int ci_hdrc_gadget_init(struct ci13xxx *ci) | 
|  | { | 
|  | struct ci_role_driver *rdrv; | 
|  |  | 
|  | if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) | 
|  | return -ENXIO; | 
|  |  | 
|  | rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); | 
|  | if (!rdrv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rdrv->start	= udc_start; | 
|  | rdrv->stop	= udc_stop; | 
|  | rdrv->irq	= udc_irq; | 
|  | rdrv->name	= "gadget"; | 
|  | ci->roles[CI_ROLE_GADGET] = rdrv; | 
|  | INIT_WORK(&ci->vbus_work, vbus_work); | 
|  |  | 
|  | return 0; | 
|  | } |