V4L/DVB (11287): Code cleanup (passes checkpatch now) of the b2c2-flexcop-drivers 1/2
This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two.
The code is now passing the checkpatch-script.
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 93d20e5..e56627d 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -1,9 +1,7 @@
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-misc.c - miscellaneous functions.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-misc.c - miscellaneous functions
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
@@ -12,39 +10,43 @@
flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
switch (v.misc_204.Rev_N_sig_revision_hi) {
- case 0x2:
- deb_info("found a FlexCopII.\n");
- fc->rev = FLEXCOP_II;
- break;
- case 0x3:
- deb_info("found a FlexCopIIb.\n");
- fc->rev = FLEXCOP_IIB;
- break;
- case 0x0:
- deb_info("found a FlexCopIII.\n");
- fc->rev = FLEXCOP_III;
- break;
- default:
- err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
- break;
+ case 0x2:
+ deb_info("found a FlexCopII.\n");
+ fc->rev = FLEXCOP_II;
+ break;
+ case 0x3:
+ deb_info("found a FlexCopIIb.\n");
+ fc->rev = FLEXCOP_IIB;
+ break;
+ case 0x0:
+ deb_info("found a FlexCopIII.\n");
+ fc->rev = FLEXCOP_III;
+ break;
+ default:
+ err("unknown FlexCop Revision: %x. Please report this to "
+ "linux-dvb@linuxtv.org.",
+ v.misc_204.Rev_N_sig_revision_hi);
+ break;
}
if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
- deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
+ deb_info("this FlexCop has "
+ "the additional 32 hardware pid filter.\n");
else
- deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
+ deb_info("this FlexCop has "
+ "the 6 basic main hardware pid filter.\n");
/* bus parts have to decide if hw pid filtering is used or not. */
}
static const char *flexcop_revision_names[] = {
- "Unkown chip",
+ "Unknown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
static const char *flexcop_device_names[] = {
- "Unkown device",
+ "Unknown device",
"Air2PC/AirStar 2 DVB-T",
"Air2PC/AirStar 2 ATSC 1st generation",
"Air2PC/AirStar 2 ATSC 2nd generation",
@@ -61,21 +63,23 @@
"PCI",
};
-void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
- char *suffix)
+void flexcop_device_name(struct flexcop_device *fc,
+ const char *prefix, const char *suffix)
{
- info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
- flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
- flexcop_revision_names[fc->rev],suffix);
+ info("%s '%s' at the '%s' bus controlled by a '%s' %s",
+ prefix, flexcop_device_names[fc->dev_type],
+ flexcop_bus_names[fc->bus_type],
+ flexcop_revision_names[fc->rev], suffix);
}
-void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num)
+void flexcop_dump_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, int num)
{
flexcop_ibi_value v;
int i;
for (i = 0; i < num; i++) {
- v = fc->read_ibi_reg(fc,reg+4*i);
- deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw);
+ v = fc->read_ibi_reg(fc, reg+4*i);
+ deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw);
}
deb_rdump("\n");
}