regulator: tps65910: add support for input supply
There is multiple voltage input pins on device which
takes the voltage input for different voltage regulator.
Support to configure the voltage input supplied by
different regulator for each regulators.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index b51d206..31be5a3 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -32,6 +32,28 @@
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
There should be 9 entries here, one for each gpio.
+- xxx-supply: Input voltage supply regulator.
+ Missing of these properties will be assume as there is no supply regulator
+ for that input pins and always powered on.
+ The valid input supply properties are:
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep
@@ -57,6 +79,9 @@
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+ vcc7-supply = <®_parent>;
+ vcc1-supply = <®_parent>;
+
regulators {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index a534e087..e319d96 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -85,6 +85,7 @@
struct tps_info {
const char *name;
+ const char *vin_name;
u8 n_voltages;
const unsigned int *voltage_table;
int enable_time_us;
@@ -93,20 +94,24 @@
static struct tps_info tps65910_regs[] = {
{
.name = "vrtc",
+ .vin_name = "vcc7",
.enable_time_us = 2200,
},
{
.name = "vio",
+ .vin_name = "vccio",
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
+ .vin_name = "vcc1",
.enable_time_us = 350,
},
{
.name = "vdd2",
+ .vin_name = "vcc2",
.enable_time_us = 350,
},
{
@@ -117,48 +122,56 @@
},
{
.name = "vdig1",
+ .vin_name = "vcc6",
.n_voltages = ARRAY_SIZE(VDIG1_VSEL_table),
.voltage_table = VDIG1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdig2",
+ .vin_name = "vcc6",
.n_voltages = ARRAY_SIZE(VDIG2_VSEL_table),
.voltage_table = VDIG2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vpll",
+ .vin_name = "vcc5",
.n_voltages = ARRAY_SIZE(VPLL_VSEL_table),
.voltage_table = VPLL_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdac",
+ .vin_name = "vcc5",
.n_voltages = ARRAY_SIZE(VDAC_VSEL_table),
.voltage_table = VDAC_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux1",
+ .vin_name = "vcc4",
.n_voltages = ARRAY_SIZE(VAUX1_VSEL_table),
.voltage_table = VAUX1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux2",
+ .vin_name = "vcc4",
.n_voltages = ARRAY_SIZE(VAUX2_VSEL_table),
.voltage_table = VAUX2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux33",
+ .vin_name = "vcc3",
.n_voltages = ARRAY_SIZE(VAUX33_VSEL_table),
.voltage_table = VAUX33_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vmmc",
+ .vin_name = "vcc3",
.n_voltages = ARRAY_SIZE(VMMC_VSEL_table),
.voltage_table = VMMC_VSEL_table,
.enable_time_us = 100,
@@ -168,21 +181,25 @@
static struct tps_info tps65911_regs[] = {
{
.name = "vrtc",
+ .vin_name = "vcc7",
.enable_time_us = 2200,
},
{
.name = "vio",
+ .vin_name = "vccio",
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
+ .vin_name = "vcc1",
.n_voltages = 73,
.enable_time_us = 350,
},
{
.name = "vdd2",
+ .vin_name = "vcc2",
.n_voltages = 73,
.enable_time_us = 350,
},
@@ -193,41 +210,49 @@
},
{
.name = "ldo1",
+ .vin_name = "vcc6",
.n_voltages = 47,
.enable_time_us = 420,
},
{
.name = "ldo2",
+ .vin_name = "vcc6",
.n_voltages = 47,
.enable_time_us = 420,
},
{
.name = "ldo3",
+ .vin_name = "vcc5",
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo4",
+ .vin_name = "vcc5",
.n_voltages = 47,
.enable_time_us = 230,
},
{
.name = "ldo5",
+ .vin_name = "vcc4",
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo6",
+ .vin_name = "vcc3",
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo7",
+ .vin_name = "vcc3",
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo8",
+ .vin_name = "vcc3",
.n_voltages = 24,
.enable_time_us = 230,
},
@@ -1013,6 +1038,9 @@
*tps65910_reg_matches = matches;
for (idx = 0; idx < count; idx++) {
+ struct tps_info *info = matches[idx].driver_data;
+ char in_supply[32]; /* 32 is max size of property name */
+
if (!matches[idx].init_data || !matches[idx].of_node)
continue;
@@ -1023,6 +1051,13 @@
"ti,regulator-ext-sleep-control", &prop);
if (!ret)
pmic_plat_data->regulator_ext_sleep_control[idx] = prop;
+
+ if (info->vin_name) {
+ snprintf(in_supply, 32, "%s-supply", info->vin_name);
+ if (of_find_property(np, in_supply, 0))
+ pmic_plat_data->input_supply[idx] =
+ info->vin_name;
+ }
}
return pmic_plat_data;
@@ -1126,6 +1161,7 @@
pmic->info[i] = info;
pmic->desc[i].name = info->name;
+ pmic->desc[i].supply_name = pmic_plat_data->input_supply[i];
pmic->desc[i].id = i;
pmic->desc[i].n_voltages = info->n_voltages;
pmic->desc[i].enable_time = info->enable_time_us;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index dd8dc0a..c5f8060 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -799,6 +799,7 @@
/**
* struct tps65910_board
* Board platform data may be used to initialize regulators.
+ * @input_supply: Name of input supply regulator.
*/
struct tps65910_board {
@@ -811,6 +812,7 @@
struct tps65910_sleep_keepon_data *slp_keepon;
bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
+ const char *input_supply[TPS65910_NUM_REGS];
struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
};