|  | /* | 
|  | * Public API and common code for kernel->userspace relay file support. | 
|  | * | 
|  | * See Documentation/filesystems/relay.txt for an overview. | 
|  | * | 
|  | * Copyright (C) 2002-2005 - Tom Zanussi (zanussi@us.ibm.com), IBM Corp | 
|  | * Copyright (C) 1999-2005 - Karim Yaghmour (karim@opersys.com) | 
|  | * | 
|  | * Moved to kernel/relay.c by Paul Mundt, 2006. | 
|  | * November 2006 - CPU hotplug support by Mathieu Desnoyers | 
|  | * 	(mathieu.desnoyers@polymtl.ca) | 
|  | * | 
|  | * This file is released under the GPL. | 
|  | */ | 
|  | #include <linux/errno.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/relay.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/splice.h> | 
|  |  | 
|  | /* list of open channels, for cpu hotplug */ | 
|  | static DEFINE_MUTEX(relay_channels_mutex); | 
|  | static LIST_HEAD(relay_channels); | 
|  |  | 
|  | /* | 
|  | * close() vm_op implementation for relay file mapping. | 
|  | */ | 
|  | static void relay_file_mmap_close(struct vm_area_struct *vma) | 
|  | { | 
|  | struct rchan_buf *buf = vma->vm_private_data; | 
|  | buf->chan->cb->buf_unmapped(buf, vma->vm_file); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * fault() vm_op implementation for relay file mapping. | 
|  | */ | 
|  | static int relay_buf_fault(struct vm_area_struct *vma, struct vm_fault *vmf) | 
|  | { | 
|  | struct page *page; | 
|  | struct rchan_buf *buf = vma->vm_private_data; | 
|  | pgoff_t pgoff = vmf->pgoff; | 
|  |  | 
|  | if (!buf) | 
|  | return VM_FAULT_OOM; | 
|  |  | 
|  | page = vmalloc_to_page(buf->start + (pgoff << PAGE_SHIFT)); | 
|  | if (!page) | 
|  | return VM_FAULT_SIGBUS; | 
|  | get_page(page); | 
|  | vmf->page = page; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vm_ops for relay file mappings. | 
|  | */ | 
|  | static const struct vm_operations_struct relay_file_mmap_ops = { | 
|  | .fault = relay_buf_fault, | 
|  | .close = relay_file_mmap_close, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * allocate an array of pointers of struct page | 
|  | */ | 
|  | static struct page **relay_alloc_page_array(unsigned int n_pages) | 
|  | { | 
|  | const size_t pa_size = n_pages * sizeof(struct page *); | 
|  | if (pa_size > PAGE_SIZE) | 
|  | return vzalloc(pa_size); | 
|  | return kzalloc(pa_size, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * free an array of pointers of struct page | 
|  | */ | 
|  | static void relay_free_page_array(struct page **array) | 
|  | { | 
|  | if (is_vmalloc_addr(array)) | 
|  | vfree(array); | 
|  | else | 
|  | kfree(array); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_mmap_buf: - mmap channel buffer to process address space | 
|  | *	@buf: relay channel buffer | 
|  | *	@vma: vm_area_struct describing memory to be mapped | 
|  | * | 
|  | *	Returns 0 if ok, negative on error | 
|  | * | 
|  | *	Caller should already have grabbed mmap_sem. | 
|  | */ | 
|  | static int relay_mmap_buf(struct rchan_buf *buf, struct vm_area_struct *vma) | 
|  | { | 
|  | unsigned long length = vma->vm_end - vma->vm_start; | 
|  | struct file *filp = vma->vm_file; | 
|  |  | 
|  | if (!buf) | 
|  | return -EBADF; | 
|  |  | 
|  | if (length != (unsigned long)buf->chan->alloc_size) | 
|  | return -EINVAL; | 
|  |  | 
|  | vma->vm_ops = &relay_file_mmap_ops; | 
|  | vma->vm_flags |= VM_DONTEXPAND; | 
|  | vma->vm_private_data = buf; | 
|  | buf->chan->cb->buf_mapped(buf, filp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_alloc_buf - allocate a channel buffer | 
|  | *	@buf: the buffer struct | 
|  | *	@size: total size of the buffer | 
|  | * | 
|  | *	Returns a pointer to the resulting buffer, %NULL if unsuccessful. The | 
|  | *	passed in size will get page aligned, if it isn't already. | 
|  | */ | 
|  | static void *relay_alloc_buf(struct rchan_buf *buf, size_t *size) | 
|  | { | 
|  | void *mem; | 
|  | unsigned int i, j, n_pages; | 
|  |  | 
|  | *size = PAGE_ALIGN(*size); | 
|  | n_pages = *size >> PAGE_SHIFT; | 
|  |  | 
|  | buf->page_array = relay_alloc_page_array(n_pages); | 
|  | if (!buf->page_array) | 
|  | return NULL; | 
|  |  | 
|  | for (i = 0; i < n_pages; i++) { | 
|  | buf->page_array[i] = alloc_page(GFP_KERNEL); | 
|  | if (unlikely(!buf->page_array[i])) | 
|  | goto depopulate; | 
|  | set_page_private(buf->page_array[i], (unsigned long)buf); | 
|  | } | 
|  | mem = vmap(buf->page_array, n_pages, VM_MAP, PAGE_KERNEL); | 
|  | if (!mem) | 
|  | goto depopulate; | 
|  |  | 
|  | memset(mem, 0, *size); | 
|  | buf->page_count = n_pages; | 
|  | return mem; | 
|  |  | 
|  | depopulate: | 
|  | for (j = 0; j < i; j++) | 
|  | __free_page(buf->page_array[j]); | 
|  | relay_free_page_array(buf->page_array); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_create_buf - allocate and initialize a channel buffer | 
|  | *	@chan: the relay channel | 
|  | * | 
|  | *	Returns channel buffer if successful, %NULL otherwise. | 
|  | */ | 
|  | static struct rchan_buf *relay_create_buf(struct rchan *chan) | 
|  | { | 
|  | struct rchan_buf *buf; | 
|  |  | 
|  | if (chan->n_subbufs > UINT_MAX / sizeof(size_t *)) | 
|  | return NULL; | 
|  |  | 
|  | buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL); | 
|  | if (!buf) | 
|  | return NULL; | 
|  | buf->padding = kmalloc(chan->n_subbufs * sizeof(size_t *), GFP_KERNEL); | 
|  | if (!buf->padding) | 
|  | goto free_buf; | 
|  |  | 
|  | buf->start = relay_alloc_buf(buf, &chan->alloc_size); | 
|  | if (!buf->start) | 
|  | goto free_buf; | 
|  |  | 
|  | buf->chan = chan; | 
|  | kref_get(&buf->chan->kref); | 
|  | return buf; | 
|  |  | 
|  | free_buf: | 
|  | kfree(buf->padding); | 
|  | kfree(buf); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_destroy_channel - free the channel struct | 
|  | *	@kref: target kernel reference that contains the relay channel | 
|  | * | 
|  | *	Should only be called from kref_put(). | 
|  | */ | 
|  | static void relay_destroy_channel(struct kref *kref) | 
|  | { | 
|  | struct rchan *chan = container_of(kref, struct rchan, kref); | 
|  | kfree(chan); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_destroy_buf - destroy an rchan_buf struct and associated buffer | 
|  | *	@buf: the buffer struct | 
|  | */ | 
|  | static void relay_destroy_buf(struct rchan_buf *buf) | 
|  | { | 
|  | struct rchan *chan = buf->chan; | 
|  | unsigned int i; | 
|  |  | 
|  | if (likely(buf->start)) { | 
|  | vunmap(buf->start); | 
|  | for (i = 0; i < buf->page_count; i++) | 
|  | __free_page(buf->page_array[i]); | 
|  | relay_free_page_array(buf->page_array); | 
|  | } | 
|  | chan->buf[buf->cpu] = NULL; | 
|  | kfree(buf->padding); | 
|  | kfree(buf); | 
|  | kref_put(&chan->kref, relay_destroy_channel); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_remove_buf - remove a channel buffer | 
|  | *	@kref: target kernel reference that contains the relay buffer | 
|  | * | 
|  | *	Removes the file from the fileystem, which also frees the | 
|  | *	rchan_buf_struct and the channel buffer.  Should only be called from | 
|  | *	kref_put(). | 
|  | */ | 
|  | static void relay_remove_buf(struct kref *kref) | 
|  | { | 
|  | struct rchan_buf *buf = container_of(kref, struct rchan_buf, kref); | 
|  | buf->chan->cb->remove_buf_file(buf->dentry); | 
|  | relay_destroy_buf(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_buf_empty - boolean, is the channel buffer empty? | 
|  | *	@buf: channel buffer | 
|  | * | 
|  | *	Returns 1 if the buffer is empty, 0 otherwise. | 
|  | */ | 
|  | static int relay_buf_empty(struct rchan_buf *buf) | 
|  | { | 
|  | return (buf->subbufs_produced - buf->subbufs_consumed) ? 0 : 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_buf_full - boolean, is the channel buffer full? | 
|  | *	@buf: channel buffer | 
|  | * | 
|  | *	Returns 1 if the buffer is full, 0 otherwise. | 
|  | */ | 
|  | int relay_buf_full(struct rchan_buf *buf) | 
|  | { | 
|  | size_t ready = buf->subbufs_produced - buf->subbufs_consumed; | 
|  | return (ready >= buf->chan->n_subbufs) ? 1 : 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_buf_full); | 
|  |  | 
|  | /* | 
|  | * High-level relay kernel API and associated functions. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * rchan_callback implementations defining default channel behavior.  Used | 
|  | * in place of corresponding NULL values in client callback struct. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * subbuf_start() default callback.  Does nothing. | 
|  | */ | 
|  | static int subbuf_start_default_callback (struct rchan_buf *buf, | 
|  | void *subbuf, | 
|  | void *prev_subbuf, | 
|  | size_t prev_padding) | 
|  | { | 
|  | if (relay_buf_full(buf)) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * buf_mapped() default callback.  Does nothing. | 
|  | */ | 
|  | static void buf_mapped_default_callback(struct rchan_buf *buf, | 
|  | struct file *filp) | 
|  | { | 
|  | } | 
|  |  | 
|  | /* | 
|  | * buf_unmapped() default callback.  Does nothing. | 
|  | */ | 
|  | static void buf_unmapped_default_callback(struct rchan_buf *buf, | 
|  | struct file *filp) | 
|  | { | 
|  | } | 
|  |  | 
|  | /* | 
|  | * create_buf_file_create() default callback.  Does nothing. | 
|  | */ | 
|  | static struct dentry *create_buf_file_default_callback(const char *filename, | 
|  | struct dentry *parent, | 
|  | umode_t mode, | 
|  | struct rchan_buf *buf, | 
|  | int *is_global) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * remove_buf_file() default callback.  Does nothing. | 
|  | */ | 
|  | static int remove_buf_file_default_callback(struct dentry *dentry) | 
|  | { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* relay channel default callbacks */ | 
|  | static struct rchan_callbacks default_channel_callbacks = { | 
|  | .subbuf_start = subbuf_start_default_callback, | 
|  | .buf_mapped = buf_mapped_default_callback, | 
|  | .buf_unmapped = buf_unmapped_default_callback, | 
|  | .create_buf_file = create_buf_file_default_callback, | 
|  | .remove_buf_file = remove_buf_file_default_callback, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *	wakeup_readers - wake up readers waiting on a channel | 
|  | *	@data: contains the channel buffer | 
|  | * | 
|  | *	This is the timer function used to defer reader waking. | 
|  | */ | 
|  | static void wakeup_readers(unsigned long data) | 
|  | { | 
|  | struct rchan_buf *buf = (struct rchan_buf *)data; | 
|  | wake_up_interruptible(&buf->read_wait); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	__relay_reset - reset a channel buffer | 
|  | *	@buf: the channel buffer | 
|  | *	@init: 1 if this is a first-time initialization | 
|  | * | 
|  | *	See relay_reset() for description of effect. | 
|  | */ | 
|  | static void __relay_reset(struct rchan_buf *buf, unsigned int init) | 
|  | { | 
|  | size_t i; | 
|  |  | 
|  | if (init) { | 
|  | init_waitqueue_head(&buf->read_wait); | 
|  | kref_init(&buf->kref); | 
|  | setup_timer(&buf->timer, wakeup_readers, (unsigned long)buf); | 
|  | } else | 
|  | del_timer_sync(&buf->timer); | 
|  |  | 
|  | buf->subbufs_produced = 0; | 
|  | buf->subbufs_consumed = 0; | 
|  | buf->bytes_consumed = 0; | 
|  | buf->finalized = 0; | 
|  | buf->data = buf->start; | 
|  | buf->offset = 0; | 
|  |  | 
|  | for (i = 0; i < buf->chan->n_subbufs; i++) | 
|  | buf->padding[i] = 0; | 
|  |  | 
|  | buf->chan->cb->subbuf_start(buf, buf->data, NULL, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_reset - reset the channel | 
|  | *	@chan: the channel | 
|  | * | 
|  | *	This has the effect of erasing all data from all channel buffers | 
|  | *	and restarting the channel in its initial state.  The buffers | 
|  | *	are not freed, so any mappings are still in effect. | 
|  | * | 
|  | *	NOTE. Care should be taken that the channel isn't actually | 
|  | *	being used by anything when this call is made. | 
|  | */ | 
|  | void relay_reset(struct rchan *chan) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!chan) | 
|  | return; | 
|  |  | 
|  | if (chan->is_global && chan->buf[0]) { | 
|  | __relay_reset(chan->buf[0], 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | for_each_possible_cpu(i) | 
|  | if (chan->buf[i]) | 
|  | __relay_reset(chan->buf[i], 0); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_reset); | 
|  |  | 
|  | static inline void relay_set_buf_dentry(struct rchan_buf *buf, | 
|  | struct dentry *dentry) | 
|  | { | 
|  | buf->dentry = dentry; | 
|  | buf->dentry->d_inode->i_size = buf->early_bytes; | 
|  | } | 
|  |  | 
|  | static struct dentry *relay_create_buf_file(struct rchan *chan, | 
|  | struct rchan_buf *buf, | 
|  | unsigned int cpu) | 
|  | { | 
|  | struct dentry *dentry; | 
|  | char *tmpname; | 
|  |  | 
|  | tmpname = kzalloc(NAME_MAX + 1, GFP_KERNEL); | 
|  | if (!tmpname) | 
|  | return NULL; | 
|  | snprintf(tmpname, NAME_MAX, "%s%d", chan->base_filename, cpu); | 
|  |  | 
|  | /* Create file in fs */ | 
|  | dentry = chan->cb->create_buf_file(tmpname, chan->parent, | 
|  | S_IRUSR, buf, | 
|  | &chan->is_global); | 
|  |  | 
|  | kfree(tmpname); | 
|  |  | 
|  | return dentry; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	relay_open_buf - create a new relay channel buffer | 
|  | * | 
|  | *	used by relay_open() and CPU hotplug. | 
|  | */ | 
|  | static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu) | 
|  | { | 
|  | struct rchan_buf *buf = NULL; | 
|  | struct dentry *dentry; | 
|  |  | 
|  | if (chan->is_global) | 
|  | return chan->buf[0]; | 
|  |  | 
|  | buf = relay_create_buf(chan); | 
|  | if (!buf) | 
|  | return NULL; | 
|  |  | 
|  | if (chan->has_base_filename) { | 
|  | dentry = relay_create_buf_file(chan, buf, cpu); | 
|  | if (!dentry) | 
|  | goto free_buf; | 
|  | relay_set_buf_dentry(buf, dentry); | 
|  | } | 
|  |  | 
|  | buf->cpu = cpu; | 
|  | __relay_reset(buf, 1); | 
|  |  | 
|  | if(chan->is_global) { | 
|  | chan->buf[0] = buf; | 
|  | buf->cpu = 0; | 
|  | } | 
|  |  | 
|  | return buf; | 
|  |  | 
|  | free_buf: | 
|  | relay_destroy_buf(buf); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_close_buf - close a channel buffer | 
|  | *	@buf: channel buffer | 
|  | * | 
|  | *	Marks the buffer finalized and restores the default callbacks. | 
|  | *	The channel buffer and channel buffer data structure are then freed | 
|  | *	automatically when the last reference is given up. | 
|  | */ | 
|  | static void relay_close_buf(struct rchan_buf *buf) | 
|  | { | 
|  | buf->finalized = 1; | 
|  | del_timer_sync(&buf->timer); | 
|  | kref_put(&buf->kref, relay_remove_buf); | 
|  | } | 
|  |  | 
|  | static void setup_callbacks(struct rchan *chan, | 
|  | struct rchan_callbacks *cb) | 
|  | { | 
|  | if (!cb) { | 
|  | chan->cb = &default_channel_callbacks; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!cb->subbuf_start) | 
|  | cb->subbuf_start = subbuf_start_default_callback; | 
|  | if (!cb->buf_mapped) | 
|  | cb->buf_mapped = buf_mapped_default_callback; | 
|  | if (!cb->buf_unmapped) | 
|  | cb->buf_unmapped = buf_unmapped_default_callback; | 
|  | if (!cb->create_buf_file) | 
|  | cb->create_buf_file = create_buf_file_default_callback; | 
|  | if (!cb->remove_buf_file) | 
|  | cb->remove_buf_file = remove_buf_file_default_callback; | 
|  | chan->cb = cb; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * 	relay_hotcpu_callback - CPU hotplug callback | 
|  | * 	@nb: notifier block | 
|  | * 	@action: hotplug action to take | 
|  | * 	@hcpu: CPU number | 
|  | * | 
|  | * 	Returns the success/failure of the operation. (%NOTIFY_OK, %NOTIFY_BAD) | 
|  | */ | 
|  | static int __cpuinit relay_hotcpu_callback(struct notifier_block *nb, | 
|  | unsigned long action, | 
|  | void *hcpu) | 
|  | { | 
|  | unsigned int hotcpu = (unsigned long)hcpu; | 
|  | struct rchan *chan; | 
|  |  | 
|  | switch(action) { | 
|  | case CPU_UP_PREPARE: | 
|  | case CPU_UP_PREPARE_FROZEN: | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | list_for_each_entry(chan, &relay_channels, list) { | 
|  | if (chan->buf[hotcpu]) | 
|  | continue; | 
|  | chan->buf[hotcpu] = relay_open_buf(chan, hotcpu); | 
|  | if(!chan->buf[hotcpu]) { | 
|  | printk(KERN_ERR | 
|  | "relay_hotcpu_callback: cpu %d buffer " | 
|  | "creation failed\n", hotcpu); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | return notifier_from_errno(-ENOMEM); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | break; | 
|  | case CPU_DEAD: | 
|  | case CPU_DEAD_FROZEN: | 
|  | /* No need to flush the cpu : will be flushed upon | 
|  | * final relay_flush() call. */ | 
|  | break; | 
|  | } | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_open - create a new relay channel | 
|  | *	@base_filename: base name of files to create, %NULL for buffering only | 
|  | *	@parent: dentry of parent directory, %NULL for root directory or buffer | 
|  | *	@subbuf_size: size of sub-buffers | 
|  | *	@n_subbufs: number of sub-buffers | 
|  | *	@cb: client callback functions | 
|  | *	@private_data: user-defined data | 
|  | * | 
|  | *	Returns channel pointer if successful, %NULL otherwise. | 
|  | * | 
|  | *	Creates a channel buffer for each cpu using the sizes and | 
|  | *	attributes specified.  The created channel buffer files | 
|  | *	will be named base_filename0...base_filenameN-1.  File | 
|  | *	permissions will be %S_IRUSR. | 
|  | */ | 
|  | struct rchan *relay_open(const char *base_filename, | 
|  | struct dentry *parent, | 
|  | size_t subbuf_size, | 
|  | size_t n_subbufs, | 
|  | struct rchan_callbacks *cb, | 
|  | void *private_data) | 
|  | { | 
|  | unsigned int i; | 
|  | struct rchan *chan; | 
|  |  | 
|  | if (!(subbuf_size && n_subbufs)) | 
|  | return NULL; | 
|  | if (subbuf_size > UINT_MAX / n_subbufs) | 
|  | return NULL; | 
|  |  | 
|  | chan = kzalloc(sizeof(struct rchan), GFP_KERNEL); | 
|  | if (!chan) | 
|  | return NULL; | 
|  |  | 
|  | chan->version = RELAYFS_CHANNEL_VERSION; | 
|  | chan->n_subbufs = n_subbufs; | 
|  | chan->subbuf_size = subbuf_size; | 
|  | chan->alloc_size = FIX_SIZE(subbuf_size * n_subbufs); | 
|  | chan->parent = parent; | 
|  | chan->private_data = private_data; | 
|  | if (base_filename) { | 
|  | chan->has_base_filename = 1; | 
|  | strlcpy(chan->base_filename, base_filename, NAME_MAX); | 
|  | } | 
|  | setup_callbacks(chan, cb); | 
|  | kref_init(&chan->kref); | 
|  |  | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | for_each_online_cpu(i) { | 
|  | chan->buf[i] = relay_open_buf(chan, i); | 
|  | if (!chan->buf[i]) | 
|  | goto free_bufs; | 
|  | } | 
|  | list_add(&chan->list, &relay_channels); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  |  | 
|  | return chan; | 
|  |  | 
|  | free_bufs: | 
|  | for_each_possible_cpu(i) { | 
|  | if (chan->buf[i]) | 
|  | relay_close_buf(chan->buf[i]); | 
|  | } | 
|  |  | 
|  | kref_put(&chan->kref, relay_destroy_channel); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_open); | 
|  |  | 
|  | struct rchan_percpu_buf_dispatcher { | 
|  | struct rchan_buf *buf; | 
|  | struct dentry *dentry; | 
|  | }; | 
|  |  | 
|  | /* Called in atomic context. */ | 
|  | static void __relay_set_buf_dentry(void *info) | 
|  | { | 
|  | struct rchan_percpu_buf_dispatcher *p = info; | 
|  |  | 
|  | relay_set_buf_dentry(p->buf, p->dentry); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_late_setup_files - triggers file creation | 
|  | *	@chan: channel to operate on | 
|  | *	@base_filename: base name of files to create | 
|  | *	@parent: dentry of parent directory, %NULL for root directory | 
|  | * | 
|  | *	Returns 0 if successful, non-zero otherwise. | 
|  | * | 
|  | *	Use to setup files for a previously buffer-only channel. | 
|  | *	Useful to do early tracing in kernel, before VFS is up, for example. | 
|  | */ | 
|  | int relay_late_setup_files(struct rchan *chan, | 
|  | const char *base_filename, | 
|  | struct dentry *parent) | 
|  | { | 
|  | int err = 0; | 
|  | unsigned int i, curr_cpu; | 
|  | unsigned long flags; | 
|  | struct dentry *dentry; | 
|  | struct rchan_percpu_buf_dispatcher disp; | 
|  |  | 
|  | if (!chan || !base_filename) | 
|  | return -EINVAL; | 
|  |  | 
|  | strlcpy(chan->base_filename, base_filename, NAME_MAX); | 
|  |  | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | /* Is chan already set up? */ | 
|  | if (unlikely(chan->has_base_filename)) { | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | return -EEXIST; | 
|  | } | 
|  | chan->has_base_filename = 1; | 
|  | chan->parent = parent; | 
|  | curr_cpu = get_cpu(); | 
|  | /* | 
|  | * The CPU hotplug notifier ran before us and created buffers with | 
|  | * no files associated. So it's safe to call relay_setup_buf_file() | 
|  | * on all currently online CPUs. | 
|  | */ | 
|  | for_each_online_cpu(i) { | 
|  | if (unlikely(!chan->buf[i])) { | 
|  | WARN_ONCE(1, KERN_ERR "CPU has no buffer!\n"); | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | dentry = relay_create_buf_file(chan, chan->buf[i], i); | 
|  | if (unlikely(!dentry)) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (curr_cpu == i) { | 
|  | local_irq_save(flags); | 
|  | relay_set_buf_dentry(chan->buf[i], dentry); | 
|  | local_irq_restore(flags); | 
|  | } else { | 
|  | disp.buf = chan->buf[i]; | 
|  | disp.dentry = dentry; | 
|  | smp_mb(); | 
|  | /* relay_channels_mutex must be held, so wait. */ | 
|  | err = smp_call_function_single(i, | 
|  | __relay_set_buf_dentry, | 
|  | &disp, 1); | 
|  | } | 
|  | if (unlikely(err)) | 
|  | break; | 
|  | } | 
|  | put_cpu(); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_switch_subbuf - switch to a new sub-buffer | 
|  | *	@buf: channel buffer | 
|  | *	@length: size of current event | 
|  | * | 
|  | *	Returns either the length passed in or 0 if full. | 
|  | * | 
|  | *	Performs sub-buffer-switch tasks such as invoking callbacks, | 
|  | *	updating padding counts, waking up readers, etc. | 
|  | */ | 
|  | size_t relay_switch_subbuf(struct rchan_buf *buf, size_t length) | 
|  | { | 
|  | void *old, *new; | 
|  | size_t old_subbuf, new_subbuf; | 
|  |  | 
|  | if (unlikely(length > buf->chan->subbuf_size)) | 
|  | goto toobig; | 
|  |  | 
|  | if (buf->offset != buf->chan->subbuf_size + 1) { | 
|  | buf->prev_padding = buf->chan->subbuf_size - buf->offset; | 
|  | old_subbuf = buf->subbufs_produced % buf->chan->n_subbufs; | 
|  | buf->padding[old_subbuf] = buf->prev_padding; | 
|  | buf->subbufs_produced++; | 
|  | if (buf->dentry) | 
|  | buf->dentry->d_inode->i_size += | 
|  | buf->chan->subbuf_size - | 
|  | buf->padding[old_subbuf]; | 
|  | else | 
|  | buf->early_bytes += buf->chan->subbuf_size - | 
|  | buf->padding[old_subbuf]; | 
|  | smp_mb(); | 
|  | if (waitqueue_active(&buf->read_wait)) | 
|  | /* | 
|  | * Calling wake_up_interruptible() from here | 
|  | * will deadlock if we happen to be logging | 
|  | * from the scheduler (trying to re-grab | 
|  | * rq->lock), so defer it. | 
|  | */ | 
|  | mod_timer(&buf->timer, jiffies + 1); | 
|  | } | 
|  |  | 
|  | old = buf->data; | 
|  | new_subbuf = buf->subbufs_produced % buf->chan->n_subbufs; | 
|  | new = buf->start + new_subbuf * buf->chan->subbuf_size; | 
|  | buf->offset = 0; | 
|  | if (!buf->chan->cb->subbuf_start(buf, new, old, buf->prev_padding)) { | 
|  | buf->offset = buf->chan->subbuf_size + 1; | 
|  | return 0; | 
|  | } | 
|  | buf->data = new; | 
|  | buf->padding[new_subbuf] = 0; | 
|  |  | 
|  | if (unlikely(length + buf->offset > buf->chan->subbuf_size)) | 
|  | goto toobig; | 
|  |  | 
|  | return length; | 
|  |  | 
|  | toobig: | 
|  | buf->chan->last_toobig = length; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_switch_subbuf); | 
|  |  | 
|  | /** | 
|  | *	relay_subbufs_consumed - update the buffer's sub-buffers-consumed count | 
|  | *	@chan: the channel | 
|  | *	@cpu: the cpu associated with the channel buffer to update | 
|  | *	@subbufs_consumed: number of sub-buffers to add to current buf's count | 
|  | * | 
|  | *	Adds to the channel buffer's consumed sub-buffer count. | 
|  | *	subbufs_consumed should be the number of sub-buffers newly consumed, | 
|  | *	not the total consumed. | 
|  | * | 
|  | *	NOTE. Kernel clients don't need to call this function if the channel | 
|  | *	mode is 'overwrite'. | 
|  | */ | 
|  | void relay_subbufs_consumed(struct rchan *chan, | 
|  | unsigned int cpu, | 
|  | size_t subbufs_consumed) | 
|  | { | 
|  | struct rchan_buf *buf; | 
|  |  | 
|  | if (!chan) | 
|  | return; | 
|  |  | 
|  | if (cpu >= NR_CPUS || !chan->buf[cpu] || | 
|  | subbufs_consumed > chan->n_subbufs) | 
|  | return; | 
|  |  | 
|  | buf = chan->buf[cpu]; | 
|  | if (subbufs_consumed > buf->subbufs_produced - buf->subbufs_consumed) | 
|  | buf->subbufs_consumed = buf->subbufs_produced; | 
|  | else | 
|  | buf->subbufs_consumed += subbufs_consumed; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_subbufs_consumed); | 
|  |  | 
|  | /** | 
|  | *	relay_close - close the channel | 
|  | *	@chan: the channel | 
|  | * | 
|  | *	Closes all channel buffers and frees the channel. | 
|  | */ | 
|  | void relay_close(struct rchan *chan) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!chan) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | if (chan->is_global && chan->buf[0]) | 
|  | relay_close_buf(chan->buf[0]); | 
|  | else | 
|  | for_each_possible_cpu(i) | 
|  | if (chan->buf[i]) | 
|  | relay_close_buf(chan->buf[i]); | 
|  |  | 
|  | if (chan->last_toobig) | 
|  | printk(KERN_WARNING "relay: one or more items not logged " | 
|  | "[item size (%Zd) > sub-buffer size (%Zd)]\n", | 
|  | chan->last_toobig, chan->subbuf_size); | 
|  |  | 
|  | list_del(&chan->list); | 
|  | kref_put(&chan->kref, relay_destroy_channel); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_close); | 
|  |  | 
|  | /** | 
|  | *	relay_flush - close the channel | 
|  | *	@chan: the channel | 
|  | * | 
|  | *	Flushes all channel buffers, i.e. forces buffer switch. | 
|  | */ | 
|  | void relay_flush(struct rchan *chan) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!chan) | 
|  | return; | 
|  |  | 
|  | if (chan->is_global && chan->buf[0]) { | 
|  | relay_switch_subbuf(chan->buf[0], 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mutex_lock(&relay_channels_mutex); | 
|  | for_each_possible_cpu(i) | 
|  | if (chan->buf[i]) | 
|  | relay_switch_subbuf(chan->buf[i], 0); | 
|  | mutex_unlock(&relay_channels_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(relay_flush); | 
|  |  | 
|  | /** | 
|  | *	relay_file_open - open file op for relay files | 
|  | *	@inode: the inode | 
|  | *	@filp: the file | 
|  | * | 
|  | *	Increments the channel buffer refcount. | 
|  | */ | 
|  | static int relay_file_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct rchan_buf *buf = inode->i_private; | 
|  | kref_get(&buf->kref); | 
|  | filp->private_data = buf; | 
|  |  | 
|  | return nonseekable_open(inode, filp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_mmap - mmap file op for relay files | 
|  | *	@filp: the file | 
|  | *	@vma: the vma describing what to map | 
|  | * | 
|  | *	Calls upon relay_mmap_buf() to map the file into user space. | 
|  | */ | 
|  | static int relay_file_mmap(struct file *filp, struct vm_area_struct *vma) | 
|  | { | 
|  | struct rchan_buf *buf = filp->private_data; | 
|  | return relay_mmap_buf(buf, vma); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_poll - poll file op for relay files | 
|  | *	@filp: the file | 
|  | *	@wait: poll table | 
|  | * | 
|  | *	Poll implemention. | 
|  | */ | 
|  | static unsigned int relay_file_poll(struct file *filp, poll_table *wait) | 
|  | { | 
|  | unsigned int mask = 0; | 
|  | struct rchan_buf *buf = filp->private_data; | 
|  |  | 
|  | if (buf->finalized) | 
|  | return POLLERR; | 
|  |  | 
|  | if (filp->f_mode & FMODE_READ) { | 
|  | poll_wait(filp, &buf->read_wait, wait); | 
|  | if (!relay_buf_empty(buf)) | 
|  | mask |= POLLIN | POLLRDNORM; | 
|  | } | 
|  |  | 
|  | return mask; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_release - release file op for relay files | 
|  | *	@inode: the inode | 
|  | *	@filp: the file | 
|  | * | 
|  | *	Decrements the channel refcount, as the filesystem is | 
|  | *	no longer using it. | 
|  | */ | 
|  | static int relay_file_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct rchan_buf *buf = filp->private_data; | 
|  | kref_put(&buf->kref, relay_remove_buf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	relay_file_read_consume - update the consumed count for the buffer | 
|  | */ | 
|  | static void relay_file_read_consume(struct rchan_buf *buf, | 
|  | size_t read_pos, | 
|  | size_t bytes_consumed) | 
|  | { | 
|  | size_t subbuf_size = buf->chan->subbuf_size; | 
|  | size_t n_subbufs = buf->chan->n_subbufs; | 
|  | size_t read_subbuf; | 
|  |  | 
|  | if (buf->subbufs_produced == buf->subbufs_consumed && | 
|  | buf->offset == buf->bytes_consumed) | 
|  | return; | 
|  |  | 
|  | if (buf->bytes_consumed + bytes_consumed > subbuf_size) { | 
|  | relay_subbufs_consumed(buf->chan, buf->cpu, 1); | 
|  | buf->bytes_consumed = 0; | 
|  | } | 
|  |  | 
|  | buf->bytes_consumed += bytes_consumed; | 
|  | if (!read_pos) | 
|  | read_subbuf = buf->subbufs_consumed % n_subbufs; | 
|  | else | 
|  | read_subbuf = read_pos / buf->chan->subbuf_size; | 
|  | if (buf->bytes_consumed + buf->padding[read_subbuf] == subbuf_size) { | 
|  | if ((read_subbuf == buf->subbufs_produced % n_subbufs) && | 
|  | (buf->offset == subbuf_size)) | 
|  | return; | 
|  | relay_subbufs_consumed(buf->chan, buf->cpu, 1); | 
|  | buf->bytes_consumed = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	relay_file_read_avail - boolean, are there unconsumed bytes available? | 
|  | */ | 
|  | static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos) | 
|  | { | 
|  | size_t subbuf_size = buf->chan->subbuf_size; | 
|  | size_t n_subbufs = buf->chan->n_subbufs; | 
|  | size_t produced = buf->subbufs_produced; | 
|  | size_t consumed = buf->subbufs_consumed; | 
|  |  | 
|  | relay_file_read_consume(buf, read_pos, 0); | 
|  |  | 
|  | consumed = buf->subbufs_consumed; | 
|  |  | 
|  | if (unlikely(buf->offset > subbuf_size)) { | 
|  | if (produced == consumed) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (unlikely(produced - consumed >= n_subbufs)) { | 
|  | consumed = produced - n_subbufs + 1; | 
|  | buf->subbufs_consumed = consumed; | 
|  | buf->bytes_consumed = 0; | 
|  | } | 
|  |  | 
|  | produced = (produced % n_subbufs) * subbuf_size + buf->offset; | 
|  | consumed = (consumed % n_subbufs) * subbuf_size + buf->bytes_consumed; | 
|  |  | 
|  | if (consumed > produced) | 
|  | produced += n_subbufs * subbuf_size; | 
|  |  | 
|  | if (consumed == produced) { | 
|  | if (buf->offset == subbuf_size && | 
|  | buf->subbufs_produced > buf->subbufs_consumed) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_read_subbuf_avail - return bytes available in sub-buffer | 
|  | *	@read_pos: file read position | 
|  | *	@buf: relay channel buffer | 
|  | */ | 
|  | static size_t relay_file_read_subbuf_avail(size_t read_pos, | 
|  | struct rchan_buf *buf) | 
|  | { | 
|  | size_t padding, avail = 0; | 
|  | size_t read_subbuf, read_offset, write_subbuf, write_offset; | 
|  | size_t subbuf_size = buf->chan->subbuf_size; | 
|  |  | 
|  | write_subbuf = (buf->data - buf->start) / subbuf_size; | 
|  | write_offset = buf->offset > subbuf_size ? subbuf_size : buf->offset; | 
|  | read_subbuf = read_pos / subbuf_size; | 
|  | read_offset = read_pos % subbuf_size; | 
|  | padding = buf->padding[read_subbuf]; | 
|  |  | 
|  | if (read_subbuf == write_subbuf) { | 
|  | if (read_offset + padding < write_offset) | 
|  | avail = write_offset - (read_offset + padding); | 
|  | } else | 
|  | avail = (subbuf_size - padding) - read_offset; | 
|  |  | 
|  | return avail; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_read_start_pos - find the first available byte to read | 
|  | *	@read_pos: file read position | 
|  | *	@buf: relay channel buffer | 
|  | * | 
|  | *	If the @read_pos is in the middle of padding, return the | 
|  | *	position of the first actually available byte, otherwise | 
|  | *	return the original value. | 
|  | */ | 
|  | static size_t relay_file_read_start_pos(size_t read_pos, | 
|  | struct rchan_buf *buf) | 
|  | { | 
|  | size_t read_subbuf, padding, padding_start, padding_end; | 
|  | size_t subbuf_size = buf->chan->subbuf_size; | 
|  | size_t n_subbufs = buf->chan->n_subbufs; | 
|  | size_t consumed = buf->subbufs_consumed % n_subbufs; | 
|  |  | 
|  | if (!read_pos) | 
|  | read_pos = consumed * subbuf_size + buf->bytes_consumed; | 
|  | read_subbuf = read_pos / subbuf_size; | 
|  | padding = buf->padding[read_subbuf]; | 
|  | padding_start = (read_subbuf + 1) * subbuf_size - padding; | 
|  | padding_end = (read_subbuf + 1) * subbuf_size; | 
|  | if (read_pos >= padding_start && read_pos < padding_end) { | 
|  | read_subbuf = (read_subbuf + 1) % n_subbufs; | 
|  | read_pos = read_subbuf * subbuf_size; | 
|  | } | 
|  |  | 
|  | return read_pos; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	relay_file_read_end_pos - return the new read position | 
|  | *	@read_pos: file read position | 
|  | *	@buf: relay channel buffer | 
|  | *	@count: number of bytes to be read | 
|  | */ | 
|  | static size_t relay_file_read_end_pos(struct rchan_buf *buf, | 
|  | size_t read_pos, | 
|  | size_t count) | 
|  | { | 
|  | size_t read_subbuf, padding, end_pos; | 
|  | size_t subbuf_size = buf->chan->subbuf_size; | 
|  | size_t n_subbufs = buf->chan->n_subbufs; | 
|  |  | 
|  | read_subbuf = read_pos / subbuf_size; | 
|  | padding = buf->padding[read_subbuf]; | 
|  | if (read_pos % subbuf_size + count + padding == subbuf_size) | 
|  | end_pos = (read_subbuf + 1) * subbuf_size; | 
|  | else | 
|  | end_pos = read_pos + count; | 
|  | if (end_pos >= subbuf_size * n_subbufs) | 
|  | end_pos = 0; | 
|  |  | 
|  | return end_pos; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	subbuf_read_actor - read up to one subbuf's worth of data | 
|  | */ | 
|  | static int subbuf_read_actor(size_t read_start, | 
|  | struct rchan_buf *buf, | 
|  | size_t avail, | 
|  | read_descriptor_t *desc, | 
|  | read_actor_t actor) | 
|  | { | 
|  | void *from; | 
|  | int ret = 0; | 
|  |  | 
|  | from = buf->start + read_start; | 
|  | ret = avail; | 
|  | if (copy_to_user(desc->arg.buf, from, avail)) { | 
|  | desc->error = -EFAULT; | 
|  | ret = 0; | 
|  | } | 
|  | desc->arg.data += ret; | 
|  | desc->written += ret; | 
|  | desc->count -= ret; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | typedef int (*subbuf_actor_t) (size_t read_start, | 
|  | struct rchan_buf *buf, | 
|  | size_t avail, | 
|  | read_descriptor_t *desc, | 
|  | read_actor_t actor); | 
|  |  | 
|  | /* | 
|  | *	relay_file_read_subbufs - read count bytes, bridging subbuf boundaries | 
|  | */ | 
|  | static ssize_t relay_file_read_subbufs(struct file *filp, loff_t *ppos, | 
|  | subbuf_actor_t subbuf_actor, | 
|  | read_actor_t actor, | 
|  | read_descriptor_t *desc) | 
|  | { | 
|  | struct rchan_buf *buf = filp->private_data; | 
|  | size_t read_start, avail; | 
|  | int ret; | 
|  |  | 
|  | if (!desc->count) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&filp->f_path.dentry->d_inode->i_mutex); | 
|  | do { | 
|  | if (!relay_file_read_avail(buf, *ppos)) | 
|  | break; | 
|  |  | 
|  | read_start = relay_file_read_start_pos(*ppos, buf); | 
|  | avail = relay_file_read_subbuf_avail(read_start, buf); | 
|  | if (!avail) | 
|  | break; | 
|  |  | 
|  | avail = min(desc->count, avail); | 
|  | ret = subbuf_actor(read_start, buf, avail, desc, actor); | 
|  | if (desc->error < 0) | 
|  | break; | 
|  |  | 
|  | if (ret) { | 
|  | relay_file_read_consume(buf, read_start, ret); | 
|  | *ppos = relay_file_read_end_pos(buf, read_start, ret); | 
|  | } | 
|  | } while (desc->count && ret); | 
|  | mutex_unlock(&filp->f_path.dentry->d_inode->i_mutex); | 
|  |  | 
|  | return desc->written; | 
|  | } | 
|  |  | 
|  | static ssize_t relay_file_read(struct file *filp, | 
|  | char __user *buffer, | 
|  | size_t count, | 
|  | loff_t *ppos) | 
|  | { | 
|  | read_descriptor_t desc; | 
|  | desc.written = 0; | 
|  | desc.count = count; | 
|  | desc.arg.buf = buffer; | 
|  | desc.error = 0; | 
|  | return relay_file_read_subbufs(filp, ppos, subbuf_read_actor, | 
|  | NULL, &desc); | 
|  | } | 
|  |  | 
|  | static void relay_consume_bytes(struct rchan_buf *rbuf, int bytes_consumed) | 
|  | { | 
|  | rbuf->bytes_consumed += bytes_consumed; | 
|  |  | 
|  | if (rbuf->bytes_consumed >= rbuf->chan->subbuf_size) { | 
|  | relay_subbufs_consumed(rbuf->chan, rbuf->cpu, 1); | 
|  | rbuf->bytes_consumed %= rbuf->chan->subbuf_size; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void relay_pipe_buf_release(struct pipe_inode_info *pipe, | 
|  | struct pipe_buffer *buf) | 
|  | { | 
|  | struct rchan_buf *rbuf; | 
|  |  | 
|  | rbuf = (struct rchan_buf *)page_private(buf->page); | 
|  | relay_consume_bytes(rbuf, buf->private); | 
|  | } | 
|  |  | 
|  | static const struct pipe_buf_operations relay_pipe_buf_ops = { | 
|  | .can_merge = 0, | 
|  | .map = generic_pipe_buf_map, | 
|  | .unmap = generic_pipe_buf_unmap, | 
|  | .confirm = generic_pipe_buf_confirm, | 
|  | .release = relay_pipe_buf_release, | 
|  | .steal = generic_pipe_buf_steal, | 
|  | .get = generic_pipe_buf_get, | 
|  | }; | 
|  |  | 
|  | static void relay_page_release(struct splice_pipe_desc *spd, unsigned int i) | 
|  | { | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	subbuf_splice_actor - splice up to one subbuf's worth of data | 
|  | */ | 
|  | static ssize_t subbuf_splice_actor(struct file *in, | 
|  | loff_t *ppos, | 
|  | struct pipe_inode_info *pipe, | 
|  | size_t len, | 
|  | unsigned int flags, | 
|  | int *nonpad_ret) | 
|  | { | 
|  | unsigned int pidx, poff, total_len, subbuf_pages, nr_pages; | 
|  | struct rchan_buf *rbuf = in->private_data; | 
|  | unsigned int subbuf_size = rbuf->chan->subbuf_size; | 
|  | uint64_t pos = (uint64_t) *ppos; | 
|  | uint32_t alloc_size = (uint32_t) rbuf->chan->alloc_size; | 
|  | size_t read_start = (size_t) do_div(pos, alloc_size); | 
|  | size_t read_subbuf = read_start / subbuf_size; | 
|  | size_t padding = rbuf->padding[read_subbuf]; | 
|  | size_t nonpad_end = read_subbuf * subbuf_size + subbuf_size - padding; | 
|  | struct page *pages[PIPE_DEF_BUFFERS]; | 
|  | struct partial_page partial[PIPE_DEF_BUFFERS]; | 
|  | struct splice_pipe_desc spd = { | 
|  | .pages = pages, | 
|  | .nr_pages = 0, | 
|  | .nr_pages_max = PIPE_DEF_BUFFERS, | 
|  | .partial = partial, | 
|  | .flags = flags, | 
|  | .ops = &relay_pipe_buf_ops, | 
|  | .spd_release = relay_page_release, | 
|  | }; | 
|  | ssize_t ret; | 
|  |  | 
|  | if (rbuf->subbufs_produced == rbuf->subbufs_consumed) | 
|  | return 0; | 
|  | if (splice_grow_spd(pipe, &spd)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * Adjust read len, if longer than what is available | 
|  | */ | 
|  | if (len > (subbuf_size - read_start % subbuf_size)) | 
|  | len = subbuf_size - read_start % subbuf_size; | 
|  |  | 
|  | subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT; | 
|  | pidx = (read_start / PAGE_SIZE) % subbuf_pages; | 
|  | poff = read_start & ~PAGE_MASK; | 
|  | nr_pages = min_t(unsigned int, subbuf_pages, pipe->buffers); | 
|  |  | 
|  | for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) { | 
|  | unsigned int this_len, this_end, private; | 
|  | unsigned int cur_pos = read_start + total_len; | 
|  |  | 
|  | if (!len) | 
|  | break; | 
|  |  | 
|  | this_len = min_t(unsigned long, len, PAGE_SIZE - poff); | 
|  | private = this_len; | 
|  |  | 
|  | spd.pages[spd.nr_pages] = rbuf->page_array[pidx]; | 
|  | spd.partial[spd.nr_pages].offset = poff; | 
|  |  | 
|  | this_end = cur_pos + this_len; | 
|  | if (this_end >= nonpad_end) { | 
|  | this_len = nonpad_end - cur_pos; | 
|  | private = this_len + padding; | 
|  | } | 
|  | spd.partial[spd.nr_pages].len = this_len; | 
|  | spd.partial[spd.nr_pages].private = private; | 
|  |  | 
|  | len -= this_len; | 
|  | total_len += this_len; | 
|  | poff = 0; | 
|  | pidx = (pidx + 1) % subbuf_pages; | 
|  |  | 
|  | if (this_end >= nonpad_end) { | 
|  | spd.nr_pages++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | if (!spd.nr_pages) | 
|  | goto out; | 
|  |  | 
|  | ret = *nonpad_ret = splice_to_pipe(pipe, &spd); | 
|  | if (ret < 0 || ret < total_len) | 
|  | goto out; | 
|  |  | 
|  | if (read_start + ret == nonpad_end) | 
|  | ret += padding; | 
|  |  | 
|  | out: | 
|  | splice_shrink_spd(&spd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t relay_file_splice_read(struct file *in, | 
|  | loff_t *ppos, | 
|  | struct pipe_inode_info *pipe, | 
|  | size_t len, | 
|  | unsigned int flags) | 
|  | { | 
|  | ssize_t spliced; | 
|  | int ret; | 
|  | int nonpad_ret = 0; | 
|  |  | 
|  | ret = 0; | 
|  | spliced = 0; | 
|  |  | 
|  | while (len && !spliced) { | 
|  | ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret); | 
|  | if (ret < 0) | 
|  | break; | 
|  | else if (!ret) { | 
|  | if (flags & SPLICE_F_NONBLOCK) | 
|  | ret = -EAGAIN; | 
|  | break; | 
|  | } | 
|  |  | 
|  | *ppos += ret; | 
|  | if (ret > len) | 
|  | len = 0; | 
|  | else | 
|  | len -= ret; | 
|  | spliced += nonpad_ret; | 
|  | nonpad_ret = 0; | 
|  | } | 
|  |  | 
|  | if (spliced) | 
|  | return spliced; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct file_operations relay_file_operations = { | 
|  | .open		= relay_file_open, | 
|  | .poll		= relay_file_poll, | 
|  | .mmap		= relay_file_mmap, | 
|  | .read		= relay_file_read, | 
|  | .llseek		= no_llseek, | 
|  | .release	= relay_file_release, | 
|  | .splice_read	= relay_file_splice_read, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(relay_file_operations); | 
|  |  | 
|  | static __init int relay_init(void) | 
|  | { | 
|  |  | 
|  | hotcpu_notifier(relay_hotcpu_callback, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | early_initcall(relay_init); |