|  | /** | 
|  | * This file contains the handling of RX in wlan driver. | 
|  | */ | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include "hostcmd.h" | 
|  | #include "radiotap.h" | 
|  | #include "decl.h" | 
|  | #include "dev.h" | 
|  | #include "wext.h" | 
|  |  | 
|  | struct eth803hdr { | 
|  | u8 dest_addr[6]; | 
|  | u8 src_addr[6]; | 
|  | u16 h803_len; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | struct rfc1042hdr { | 
|  | u8 llc_dsap; | 
|  | u8 llc_ssap; | 
|  | u8 llc_ctrl; | 
|  | u8 snap_oui[3]; | 
|  | u16 snap_type; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | struct rxpackethdr { | 
|  | struct rxpd rx_pd; | 
|  | struct eth803hdr eth803_hdr; | 
|  | struct rfc1042hdr rfc1042_hdr; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | struct rx80211packethdr { | 
|  | struct rxpd rx_pd; | 
|  | void *eth80211_hdr; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | static int process_rxed_802_11_packet(struct lbs_private *priv, | 
|  | struct sk_buff *skb); | 
|  |  | 
|  | /** | 
|  | *  @brief This function computes the avgSNR . | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @return 	   avgSNR | 
|  | */ | 
|  | static u8 lbs_getavgsnr(struct lbs_private *priv) | 
|  | { | 
|  | u8 i; | 
|  | u16 temp = 0; | 
|  | if (priv->numSNRNF == 0) | 
|  | return 0; | 
|  | for (i = 0; i < priv->numSNRNF; i++) | 
|  | temp += priv->rawSNR[i]; | 
|  | return (u8) (temp / priv->numSNRNF); | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function computes the AvgNF | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @return 	   AvgNF | 
|  | */ | 
|  | static u8 lbs_getavgnf(struct lbs_private *priv) | 
|  | { | 
|  | u8 i; | 
|  | u16 temp = 0; | 
|  | if (priv->numSNRNF == 0) | 
|  | return 0; | 
|  | for (i = 0; i < priv->numSNRNF; i++) | 
|  | temp += priv->rawNF[i]; | 
|  | return (u8) (temp / priv->numSNRNF); | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function save the raw SNR/NF to our internel buffer | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @param prxpd   A pointer to rxpd structure of received packet | 
|  | *  @return 	   n/a | 
|  | */ | 
|  | static void lbs_save_rawSNRNF(struct lbs_private *priv, struct rxpd *p_rx_pd) | 
|  | { | 
|  | if (priv->numSNRNF < DEFAULT_DATA_AVG_FACTOR) | 
|  | priv->numSNRNF++; | 
|  | priv->rawSNR[priv->nextSNRNF] = p_rx_pd->snr; | 
|  | priv->rawNF[priv->nextSNRNF] = p_rx_pd->nf; | 
|  | priv->nextSNRNF++; | 
|  | if (priv->nextSNRNF >= DEFAULT_DATA_AVG_FACTOR) | 
|  | priv->nextSNRNF = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function computes the RSSI in received packet. | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @param prxpd   A pointer to rxpd structure of received packet | 
|  | *  @return 	   n/a | 
|  | */ | 
|  | static void lbs_compute_rssi(struct lbs_private *priv, struct rxpd *p_rx_pd) | 
|  | { | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_RX); | 
|  |  | 
|  | lbs_deb_rx("rxpd: SNR %d, NF %d\n", p_rx_pd->snr, p_rx_pd->nf); | 
|  | lbs_deb_rx("before computing SNR: SNR-avg = %d, NF-avg = %d\n", | 
|  | priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, | 
|  | priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); | 
|  |  | 
|  | priv->SNR[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->snr; | 
|  | priv->NF[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->nf; | 
|  | lbs_save_rawSNRNF(priv, p_rx_pd); | 
|  |  | 
|  | priv->SNR[TYPE_RXPD][TYPE_AVG] = lbs_getavgsnr(priv) * AVG_SCALE; | 
|  | priv->NF[TYPE_RXPD][TYPE_AVG] = lbs_getavgnf(priv) * AVG_SCALE; | 
|  | lbs_deb_rx("after computing SNR: SNR-avg = %d, NF-avg = %d\n", | 
|  | priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, | 
|  | priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); | 
|  |  | 
|  | priv->RSSI[TYPE_RXPD][TYPE_NOAVG] = | 
|  | CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_NOAVG], | 
|  | priv->NF[TYPE_RXPD][TYPE_NOAVG]); | 
|  |  | 
|  | priv->RSSI[TYPE_RXPD][TYPE_AVG] = | 
|  | CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE, | 
|  | priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_RX); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function processes received packet and forwards it | 
|  | *  to kernel/upper layer | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private | 
|  | *  @param skb     A pointer to skb which includes the received packet | 
|  | *  @return 	   0 or -1 | 
|  | */ | 
|  | int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) | 
|  | { | 
|  | int ret = 0; | 
|  | struct net_device *dev = priv->dev; | 
|  | struct rxpackethdr *p_rx_pkt; | 
|  | struct rxpd *p_rx_pd; | 
|  | int hdrchop; | 
|  | struct ethhdr *p_ethhdr; | 
|  | const u8 rfc1042_eth_hdr[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_RX); | 
|  |  | 
|  | BUG_ON(!skb); | 
|  |  | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  |  | 
|  | if (priv->monitormode) | 
|  | return process_rxed_802_11_packet(priv, skb); | 
|  |  | 
|  | p_rx_pkt = (struct rxpackethdr *) skb->data; | 
|  | p_rx_pd = &p_rx_pkt->rx_pd; | 
|  | if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME)) | 
|  | dev = priv->mesh_dev; | 
|  |  | 
|  | lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, | 
|  | min_t(unsigned int, skb->len, 100)); | 
|  |  | 
|  | if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { | 
|  | lbs_deb_rx("rx err: frame received with bad length\n"); | 
|  | priv->stats.rx_length_errors++; | 
|  | ret = 0; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check rxpd status and update 802.3 stat, | 
|  | */ | 
|  | if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { | 
|  | lbs_deb_rx("rx err: frame received with bad status\n"); | 
|  | lbs_pr_alert("rxpd not ok\n"); | 
|  | priv->stats.rx_errors++; | 
|  | ret = 0; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", | 
|  | skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); | 
|  |  | 
|  | lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr, | 
|  | sizeof(p_rx_pkt->eth803_hdr.dest_addr)); | 
|  | lbs_deb_hex(LBS_DEB_RX, "RX Data: Src", p_rx_pkt->eth803_hdr.src_addr, | 
|  | sizeof(p_rx_pkt->eth803_hdr.src_addr)); | 
|  |  | 
|  | if (memcmp(&p_rx_pkt->rfc1042_hdr, | 
|  | rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) { | 
|  | /* | 
|  | *  Replace the 803 header and rfc1042 header (llc/snap) with an | 
|  | *    EthernetII header, keep the src/dst and snap_type (ethertype) | 
|  | * | 
|  | *  The firmware only passes up SNAP frames converting | 
|  | *    all RX Data from 802.11 to 802.2/LLC/SNAP frames. | 
|  | * | 
|  | *  To create the Ethernet II, just move the src, dst address right | 
|  | *    before the snap_type. | 
|  | */ | 
|  | p_ethhdr = (struct ethhdr *) | 
|  | ((u8 *) & p_rx_pkt->eth803_hdr | 
|  | + sizeof(p_rx_pkt->eth803_hdr) + sizeof(p_rx_pkt->rfc1042_hdr) | 
|  | - sizeof(p_rx_pkt->eth803_hdr.dest_addr) | 
|  | - sizeof(p_rx_pkt->eth803_hdr.src_addr) | 
|  | - sizeof(p_rx_pkt->rfc1042_hdr.snap_type)); | 
|  |  | 
|  | memcpy(p_ethhdr->h_source, p_rx_pkt->eth803_hdr.src_addr, | 
|  | sizeof(p_ethhdr->h_source)); | 
|  | memcpy(p_ethhdr->h_dest, p_rx_pkt->eth803_hdr.dest_addr, | 
|  | sizeof(p_ethhdr->h_dest)); | 
|  |  | 
|  | /* Chop off the rxpd + the excess memory from the 802.2/llc/snap header | 
|  | *   that was removed | 
|  | */ | 
|  | hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt; | 
|  | } else { | 
|  | lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP", | 
|  | (u8 *) & p_rx_pkt->rfc1042_hdr, | 
|  | sizeof(p_rx_pkt->rfc1042_hdr)); | 
|  |  | 
|  | /* Chop off the rxpd */ | 
|  | hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt; | 
|  | } | 
|  |  | 
|  | /* Chop off the leading header bytes so the skb points to the start of | 
|  | *   either the reconstructed EthII frame or the 802.2/llc/snap frame | 
|  | */ | 
|  | skb_pull(skb, hdrchop); | 
|  |  | 
|  | /* Take the data rate from the rxpd structure | 
|  | * only if the rate is auto | 
|  | */ | 
|  | if (priv->enablehwauto) | 
|  | priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate); | 
|  |  | 
|  | lbs_compute_rssi(priv, p_rx_pd); | 
|  |  | 
|  | lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); | 
|  | priv->stats.rx_bytes += skb->len; | 
|  | priv->stats.rx_packets++; | 
|  |  | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  | if (in_interrupt()) | 
|  | netif_rx(skb); | 
|  | else | 
|  | netif_rx_ni(skb); | 
|  |  | 
|  | ret = 0; | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_process_rxed_packet); | 
|  |  | 
|  | /** | 
|  | *  @brief This function converts Tx/Rx rates from the Marvell WLAN format | 
|  | *  (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) | 
|  | * | 
|  | *  @param rate    Input rate | 
|  | *  @return 	   Output Rate (0 if invalid) | 
|  | */ | 
|  | static u8 convert_mv_rate_to_radiotap(u8 rate) | 
|  | { | 
|  | switch (rate) { | 
|  | case 0:		/*   1 Mbps */ | 
|  | return 2; | 
|  | case 1:		/*   2 Mbps */ | 
|  | return 4; | 
|  | case 2:		/* 5.5 Mbps */ | 
|  | return 11; | 
|  | case 3:		/*  11 Mbps */ | 
|  | return 22; | 
|  | /* case 4: reserved */ | 
|  | case 5:		/*   6 Mbps */ | 
|  | return 12; | 
|  | case 6:		/*   9 Mbps */ | 
|  | return 18; | 
|  | case 7:		/*  12 Mbps */ | 
|  | return 24; | 
|  | case 8:		/*  18 Mbps */ | 
|  | return 36; | 
|  | case 9:		/*  24 Mbps */ | 
|  | return 48; | 
|  | case 10:		/*  36 Mbps */ | 
|  | return 72; | 
|  | case 11:		/*  48 Mbps */ | 
|  | return 96; | 
|  | case 12:		/*  54 Mbps */ | 
|  | return 108; | 
|  | } | 
|  | lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function processes a received 802.11 packet and forwards it | 
|  | *  to kernel/upper layer | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private | 
|  | *  @param skb     A pointer to skb which includes the received packet | 
|  | *  @return 	   0 or -1 | 
|  | */ | 
|  | static int process_rxed_802_11_packet(struct lbs_private *priv, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | struct rx80211packethdr *p_rx_pkt; | 
|  | struct rxpd *prxpd; | 
|  | struct rx_radiotap_hdr radiotap_hdr; | 
|  | struct rx_radiotap_hdr *pradiotap_hdr; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_RX); | 
|  |  | 
|  | p_rx_pkt = (struct rx80211packethdr *) skb->data; | 
|  | prxpd = &p_rx_pkt->rx_pd; | 
|  |  | 
|  | // lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min(skb->len, 100)); | 
|  |  | 
|  | if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { | 
|  | lbs_deb_rx("rx err: frame received with bad length\n"); | 
|  | priv->stats.rx_length_errors++; | 
|  | ret = -EINVAL; | 
|  | kfree(skb); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check rxpd status and update 802.3 stat, | 
|  | */ | 
|  | if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { | 
|  | //lbs_deb_rx("rx err: frame received with bad status\n"); | 
|  | priv->stats.rx_errors++; | 
|  | } | 
|  |  | 
|  | lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", | 
|  | skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); | 
|  |  | 
|  | /* create the exported radio header */ | 
|  |  | 
|  | /* radiotap header */ | 
|  | radiotap_hdr.hdr.it_version = 0; | 
|  | /* XXX must check this value for pad */ | 
|  | radiotap_hdr.hdr.it_pad = 0; | 
|  | radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); | 
|  | radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); | 
|  | /* unknown values */ | 
|  | radiotap_hdr.flags = 0; | 
|  | radiotap_hdr.chan_freq = 0; | 
|  | radiotap_hdr.chan_flags = 0; | 
|  | radiotap_hdr.antenna = 0; | 
|  | /* known values */ | 
|  | radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); | 
|  | /* XXX must check no carryout */ | 
|  | radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; | 
|  | radiotap_hdr.rx_flags = 0; | 
|  | if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) | 
|  | radiotap_hdr.rx_flags |= IEEE80211_RADIOTAP_F_RX_BADFCS; | 
|  | //memset(radiotap_hdr.pad, 0x11, IEEE80211_RADIOTAP_HDRLEN - 18); | 
|  |  | 
|  | /* chop the rxpd */ | 
|  | skb_pull(skb, sizeof(struct rxpd)); | 
|  |  | 
|  | /* add space for the new radio header */ | 
|  | if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) && | 
|  | pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) { | 
|  | lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__); | 
|  | ret = -ENOMEM; | 
|  | kfree_skb(skb); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | pradiotap_hdr = (void *)skb_push(skb, sizeof(struct rx_radiotap_hdr)); | 
|  | memcpy(pradiotap_hdr, &radiotap_hdr, sizeof(struct rx_radiotap_hdr)); | 
|  |  | 
|  | /* Take the data rate from the rxpd structure | 
|  | * only if the rate is auto | 
|  | */ | 
|  | if (priv->enablehwauto) | 
|  | priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate); | 
|  |  | 
|  | lbs_compute_rssi(priv, prxpd); | 
|  |  | 
|  | lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); | 
|  | priv->stats.rx_bytes += skb->len; | 
|  | priv->stats.rx_packets++; | 
|  |  | 
|  | skb->protocol = eth_type_trans(skb, priv->rtap_net_dev); | 
|  | netif_rx(skb); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); | 
|  | return ret; | 
|  | } |