|  | /* drivers/char/watchdog/scx200_wdt.c | 
|  |  | 
|  | National Semiconductor SCx200 Watchdog support | 
|  |  | 
|  | Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> | 
|  |  | 
|  | Some code taken from: | 
|  | National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver | 
|  | (c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or | 
|  | modify it under the terms of the GNU General Public License as | 
|  | published by the Free Software Foundation; either version 2 of the | 
|  | License, or (at your option) any later version. | 
|  |  | 
|  | The author(s) of this software shall not be held liable for damages | 
|  | of any nature resulting due to the use of this software. This | 
|  | software is provided AS-IS with no warranties. */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/watchdog.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/scx200.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #define NAME "scx200_wdt" | 
|  |  | 
|  | MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); | 
|  | MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | 
|  |  | 
|  | static int margin = 60;		/* in seconds */ | 
|  | module_param(margin, int, 0); | 
|  | MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); | 
|  |  | 
|  | static int nowayout = WATCHDOG_NOWAYOUT; | 
|  | module_param(nowayout, int, 0); | 
|  | MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); | 
|  |  | 
|  | static u16 wdto_restart; | 
|  | static char expect_close; | 
|  | static unsigned long open_lock; | 
|  | static DEFINE_SPINLOCK(scx_lock); | 
|  |  | 
|  | /* Bits of the WDCNFG register */ | 
|  | #define W_ENABLE 0x00fa		/* Enable watchdog */ | 
|  | #define W_DISABLE 0x0000	/* Disable watchdog */ | 
|  |  | 
|  | /* The scaling factor for the timer, this depends on the value of W_ENABLE */ | 
|  | #define W_SCALE (32768/1024) | 
|  |  | 
|  | static void scx200_wdt_ping(void) | 
|  | { | 
|  | spin_lock(&scx_lock); | 
|  | outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); | 
|  | spin_unlock(&scx_lock); | 
|  | } | 
|  |  | 
|  | static void scx200_wdt_update_margin(void) | 
|  | { | 
|  | printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); | 
|  | wdto_restart = margin * W_SCALE; | 
|  | } | 
|  |  | 
|  | static void scx200_wdt_enable(void) | 
|  | { | 
|  | printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n", | 
|  | wdto_restart); | 
|  |  | 
|  | spin_lock(&scx_lock); | 
|  | outw(0, scx200_cb_base + SCx200_WDT_WDTO); | 
|  | outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); | 
|  | outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); | 
|  | spin_unlock(&scx_lock); | 
|  |  | 
|  | scx200_wdt_ping(); | 
|  | } | 
|  |  | 
|  | static void scx200_wdt_disable(void) | 
|  | { | 
|  | printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); | 
|  |  | 
|  | spin_lock(&scx_lock); | 
|  | outw(0, scx200_cb_base + SCx200_WDT_WDTO); | 
|  | outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); | 
|  | outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); | 
|  | spin_unlock(&scx_lock); | 
|  | } | 
|  |  | 
|  | static int scx200_wdt_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | /* only allow one at a time */ | 
|  | if (test_and_set_bit(0, &open_lock)) | 
|  | return -EBUSY; | 
|  | scx200_wdt_enable(); | 
|  |  | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static int scx200_wdt_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (expect_close != 42) | 
|  | printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); | 
|  | else if (!nowayout) | 
|  | scx200_wdt_disable(); | 
|  | expect_close = 0; | 
|  | clear_bit(0, &open_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int scx200_wdt_notify_sys(struct notifier_block *this, | 
|  | unsigned long code, void *unused) | 
|  | { | 
|  | if (code == SYS_HALT || code == SYS_POWER_OFF) | 
|  | if (!nowayout) | 
|  | scx200_wdt_disable(); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block scx200_wdt_notifier = { | 
|  | .notifier_call = scx200_wdt_notify_sys, | 
|  | }; | 
|  |  | 
|  | static ssize_t scx200_wdt_write(struct file *file, const char __user *data, | 
|  | size_t len, loff_t *ppos) | 
|  | { | 
|  | /* check for a magic close character */ | 
|  | if (len) { | 
|  | size_t i; | 
|  |  | 
|  | scx200_wdt_ping(); | 
|  |  | 
|  | expect_close = 0; | 
|  | for (i = 0; i < len; ++i) { | 
|  | char c; | 
|  | if (get_user(c, data + i)) | 
|  | return -EFAULT; | 
|  | if (c == 'V') | 
|  | expect_close = 42; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | void __user *argp = (void __user *)arg; | 
|  | int __user *p = argp; | 
|  | static const struct watchdog_info ident = { | 
|  | .identity = "NatSemi SCx200 Watchdog", | 
|  | .firmware_version = 1, | 
|  | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, | 
|  | }; | 
|  | int new_margin; | 
|  |  | 
|  | switch (cmd) { | 
|  | case WDIOC_GETSUPPORT: | 
|  | if (copy_to_user(argp, &ident, sizeof(ident))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | case WDIOC_GETSTATUS: | 
|  | case WDIOC_GETBOOTSTATUS: | 
|  | if (put_user(0, p)) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | case WDIOC_KEEPALIVE: | 
|  | scx200_wdt_ping(); | 
|  | return 0; | 
|  | case WDIOC_SETTIMEOUT: | 
|  | if (get_user(new_margin, p)) | 
|  | return -EFAULT; | 
|  | if (new_margin < 1) | 
|  | return -EINVAL; | 
|  | margin = new_margin; | 
|  | scx200_wdt_update_margin(); | 
|  | scx200_wdt_ping(); | 
|  | case WDIOC_GETTIMEOUT: | 
|  | if (put_user(margin, p)) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | default: | 
|  | return -ENOTTY; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct file_operations scx200_wdt_fops = { | 
|  | .owner = THIS_MODULE, | 
|  | .llseek = no_llseek, | 
|  | .write = scx200_wdt_write, | 
|  | .unlocked_ioctl = scx200_wdt_ioctl, | 
|  | .open = scx200_wdt_open, | 
|  | .release = scx200_wdt_release, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice scx200_wdt_miscdev = { | 
|  | .minor = WATCHDOG_MINOR, | 
|  | .name = "watchdog", | 
|  | .fops = &scx200_wdt_fops, | 
|  | }; | 
|  |  | 
|  | static int __init scx200_wdt_init(void) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | printk(KERN_DEBUG NAME ": NatSemi SCx200 Watchdog Driver\n"); | 
|  |  | 
|  | /* check that we have found the configuration block */ | 
|  | if (!scx200_cb_present()) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET, | 
|  | SCx200_WDT_SIZE, | 
|  | "NatSemi SCx200 Watchdog")) { | 
|  | printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | scx200_wdt_update_margin(); | 
|  | scx200_wdt_disable(); | 
|  |  | 
|  | r = register_reboot_notifier(&scx200_wdt_notifier); | 
|  | if (r) { | 
|  | printk(KERN_ERR NAME ": unable to register reboot notifier"); | 
|  | release_region(scx200_cb_base + SCx200_WDT_OFFSET, | 
|  | SCx200_WDT_SIZE); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | r = misc_register(&scx200_wdt_miscdev); | 
|  | if (r) { | 
|  | unregister_reboot_notifier(&scx200_wdt_notifier); | 
|  | release_region(scx200_cb_base + SCx200_WDT_OFFSET, | 
|  | SCx200_WDT_SIZE); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit scx200_wdt_cleanup(void) | 
|  | { | 
|  | misc_deregister(&scx200_wdt_miscdev); | 
|  | unregister_reboot_notifier(&scx200_wdt_notifier); | 
|  | release_region(scx200_cb_base + SCx200_WDT_OFFSET, | 
|  | SCx200_WDT_SIZE); | 
|  | } | 
|  |  | 
|  | module_init(scx200_wdt_init); | 
|  | module_exit(scx200_wdt_cleanup); | 
|  |  | 
|  | /* | 
|  | Local variables: | 
|  | compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" | 
|  | c-basic-offset: 8 | 
|  | End: | 
|  | */ |