|  | /* | 
|  | * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles | 
|  | * | 
|  | * Main part | 
|  | * | 
|  | * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria | 
|  | * | 
|  | * If distributed as part of the Linux kernel, this code is licensed under the | 
|  | * terms of the GPL v2. | 
|  | * | 
|  | * Otherwise, the following license terms apply: | 
|  | * | 
|  | * * Redistribution and use in source and binary forms, with or without | 
|  | * * modification, are permitted provided that the following conditions | 
|  | * * are met: | 
|  | * * 1) Redistributions of source code must retain the above copyright | 
|  | * *    notice, this list of conditions and the following disclaimer. | 
|  | * * 2) Redistributions in binary form must reproduce the above copyright | 
|  | * *    notice, this list of conditions and the following disclaimer in the | 
|  | * *    documentation and/or other materials provided with the distribution. | 
|  | * * 3) The name of the author may not be used to endorse or promote products | 
|  | * *    derived from this software without specific psisusbr written permission. | 
|  | * * | 
|  | * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR | 
|  | * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
|  | * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
|  | * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
|  | * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | * Author: 	Thomas Winischhofer <thomas@winischhofer.net> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/kref.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/smp_lock.h> | 
|  | #include <linux/vmalloc.h> | 
|  |  | 
|  | #include "sisusb.h" | 
|  | #include "sisusb_init.h" | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | #include <linux/font.h> | 
|  | #endif | 
|  |  | 
|  | #define SISUSB_DONTSYNC | 
|  |  | 
|  | /* Forward declarations / clean-up routines */ | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | static int sisusb_first_vc = 0; | 
|  | static int sisusb_last_vc = 0; | 
|  | module_param_named(first, sisusb_first_vc, int, 0); | 
|  | module_param_named(last, sisusb_last_vc, int, 0); | 
|  | MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)"); | 
|  | MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)"); | 
|  | #endif | 
|  |  | 
|  | static struct usb_driver sisusb_driver; | 
|  |  | 
|  | DEFINE_MUTEX(disconnect_mutex); | 
|  |  | 
|  | static void | 
|  | sisusb_free_buffers(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUMOBUFS; i++) { | 
|  | if (sisusb->obuf[i]) { | 
|  | usb_buffer_free(sisusb->sisusb_dev, sisusb->obufsize, | 
|  | sisusb->obuf[i], sisusb->transfer_dma_out[i]); | 
|  | sisusb->obuf[i] = NULL; | 
|  | } | 
|  | } | 
|  | if (sisusb->ibuf) { | 
|  | usb_buffer_free(sisusb->sisusb_dev, sisusb->ibufsize, | 
|  | sisusb->ibuf, sisusb->transfer_dma_in); | 
|  | sisusb->ibuf = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | sisusb_free_urbs(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUMOBUFS; i++) { | 
|  | usb_free_urb(sisusb->sisurbout[i]); | 
|  | sisusb->sisurbout[i] = NULL; | 
|  | } | 
|  | usb_free_urb(sisusb->sisurbin); | 
|  | sisusb->sisurbin = NULL; | 
|  | } | 
|  |  | 
|  | /* Level 0: USB transport layer */ | 
|  |  | 
|  | /* 1. out-bulks */ | 
|  |  | 
|  | /* out-urb management */ | 
|  |  | 
|  | /* Return 1 if all free, 0 otherwise */ | 
|  | static int | 
|  | sisusb_all_free(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sisusb->numobufs; i++) { | 
|  |  | 
|  | if (sisusb->urbstatus[i] & SU_URB_BUSY) | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Kill all busy URBs */ | 
|  | static void | 
|  | sisusb_kill_all_busy(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (sisusb_all_free(sisusb)) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < sisusb->numobufs; i++) { | 
|  |  | 
|  | if (sisusb->urbstatus[i] & SU_URB_BUSY) | 
|  | usb_kill_urb(sisusb->sisurbout[i]); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Return 1 if ok, 0 if error (not all complete within timeout) */ | 
|  | static int | 
|  | sisusb_wait_all_out_complete(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int timeout = 5 * HZ, i = 1; | 
|  |  | 
|  | wait_event_timeout(sisusb->wait_q, | 
|  | (i = sisusb_all_free(sisusb)), | 
|  | timeout); | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_outurb_available(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sisusb->numobufs; i++) { | 
|  |  | 
|  | if ((sisusb->urbstatus[i] & (SU_URB_BUSY|SU_URB_ALLOC)) == 0) | 
|  | return i; | 
|  |  | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_get_free_outbuf(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i, timeout = 5 * HZ; | 
|  |  | 
|  | wait_event_timeout(sisusb->wait_q, | 
|  | ((i = sisusb_outurb_available(sisusb)) >= 0), | 
|  | timeout); | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_alloc_outbuf(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | i = sisusb_outurb_available(sisusb); | 
|  |  | 
|  | if (i >= 0) | 
|  | sisusb->urbstatus[i] |= SU_URB_ALLOC; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static void | 
|  | sisusb_free_outbuf(struct sisusb_usb_data *sisusb, int index) | 
|  | { | 
|  | if ((index >= 0) && (index < sisusb->numobufs)) | 
|  | sisusb->urbstatus[index] &= ~SU_URB_ALLOC; | 
|  | } | 
|  |  | 
|  | /* completion callback */ | 
|  |  | 
|  | static void | 
|  | sisusb_bulk_completeout(struct urb *urb) | 
|  | { | 
|  | struct sisusb_urb_context *context = urb->context; | 
|  | struct sisusb_usb_data *sisusb; | 
|  |  | 
|  | if (!context) | 
|  | return; | 
|  |  | 
|  | sisusb = context->sisusb; | 
|  |  | 
|  | if (!sisusb || !sisusb->sisusb_dev || !sisusb->present) | 
|  | return; | 
|  |  | 
|  | #ifndef SISUSB_DONTSYNC | 
|  | if (context->actual_length) | 
|  | *(context->actual_length) += urb->actual_length; | 
|  | #endif | 
|  |  | 
|  | sisusb->urbstatus[context->urbindex] &= ~SU_URB_BUSY; | 
|  | wake_up(&sisusb->wait_q); | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, void *data, | 
|  | int len, int *actual_length, int timeout, unsigned int tflags, | 
|  | dma_addr_t transfer_dma) | 
|  | { | 
|  | struct urb *urb = sisusb->sisurbout[index]; | 
|  | int retval, byteswritten = 0; | 
|  |  | 
|  | /* Set up URB */ | 
|  | urb->transfer_flags = 0; | 
|  |  | 
|  | usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len, | 
|  | sisusb_bulk_completeout, &sisusb->urbout_context[index]); | 
|  |  | 
|  | urb->transfer_flags |= tflags; | 
|  | urb->actual_length = 0; | 
|  |  | 
|  | if ((urb->transfer_dma = transfer_dma)) | 
|  | urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  |  | 
|  | /* Set up context */ | 
|  | sisusb->urbout_context[index].actual_length = (timeout) ? | 
|  | NULL : actual_length; | 
|  |  | 
|  | /* Declare this urb/buffer in use */ | 
|  | sisusb->urbstatus[index] |= SU_URB_BUSY; | 
|  |  | 
|  | /* Submit URB */ | 
|  | retval = usb_submit_urb(urb, GFP_ATOMIC); | 
|  |  | 
|  | /* If OK, and if timeout > 0, wait for completion */ | 
|  | if ((retval == 0) && timeout) { | 
|  | wait_event_timeout(sisusb->wait_q, | 
|  | (!(sisusb->urbstatus[index] & SU_URB_BUSY)), | 
|  | timeout); | 
|  | if (sisusb->urbstatus[index] & SU_URB_BUSY) { | 
|  | /* URB timed out... kill it and report error */ | 
|  | usb_kill_urb(urb); | 
|  | retval = -ETIMEDOUT; | 
|  | } else { | 
|  | /* Otherwise, report urb status */ | 
|  | retval = urb->status; | 
|  | byteswritten = urb->actual_length; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (actual_length) | 
|  | *actual_length = byteswritten; | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* 2. in-bulks */ | 
|  |  | 
|  | /* completion callback */ | 
|  |  | 
|  | static void | 
|  | sisusb_bulk_completein(struct urb *urb) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb = urb->context; | 
|  |  | 
|  | if (!sisusb || !sisusb->sisusb_dev || !sisusb->present) | 
|  | return; | 
|  |  | 
|  | sisusb->completein = 1; | 
|  | wake_up(&sisusb->wait_q); | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, int len, | 
|  | int *actual_length, int timeout, unsigned int tflags, dma_addr_t transfer_dma) | 
|  | { | 
|  | struct urb *urb = sisusb->sisurbin; | 
|  | int retval, readbytes = 0; | 
|  |  | 
|  | urb->transfer_flags = 0; | 
|  |  | 
|  | usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len, | 
|  | sisusb_bulk_completein, sisusb); | 
|  |  | 
|  | urb->transfer_flags |= tflags; | 
|  | urb->actual_length = 0; | 
|  |  | 
|  | if ((urb->transfer_dma = transfer_dma)) | 
|  | urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  |  | 
|  | sisusb->completein = 0; | 
|  | retval = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (retval == 0) { | 
|  | wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout); | 
|  | if (!sisusb->completein) { | 
|  | /* URB timed out... kill it and report error */ | 
|  | usb_kill_urb(urb); | 
|  | retval = -ETIMEDOUT; | 
|  | } else { | 
|  | /* URB completed within timout */ | 
|  | retval = urb->status; | 
|  | readbytes = urb->actual_length; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (actual_length) | 
|  | *actual_length = readbytes; | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Level 1:  */ | 
|  |  | 
|  | /* Send a bulk message of variable size | 
|  | * | 
|  | * To copy the data from userspace, give pointer to "userbuffer", | 
|  | * to copy from (non-DMA) kernel memory, give "kernbuffer". If | 
|  | * both of these are NULL, it is assumed, that the transfer | 
|  | * buffer "sisusb->obuf[index]" is set up with the data to send. | 
|  | * Index is ignored if either kernbuffer or userbuffer is set. | 
|  | * If async is nonzero, URBs will be sent without waiting for | 
|  | * completion of the previous URB. | 
|  | * | 
|  | * (return 0 on success) | 
|  | */ | 
|  |  | 
|  | static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, | 
|  | char *kernbuffer, const char __user *userbuffer, int index, | 
|  | ssize_t *bytes_written, unsigned int tflags, int async) | 
|  | { | 
|  | int result = 0, retry, count = len; | 
|  | int passsize, thispass, transferred_len = 0; | 
|  | int fromuser = (userbuffer != NULL) ? 1 : 0; | 
|  | int fromkern = (kernbuffer != NULL) ? 1 : 0; | 
|  | unsigned int pipe; | 
|  | char *buffer; | 
|  |  | 
|  | (*bytes_written) = 0; | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb || !sisusb->present || !sisusb->sisusb_dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* If we copy data from kernel or userspace, force the | 
|  | * allocation of a buffer/urb. If we have the data in | 
|  | * the transfer buffer[index] already, reuse the buffer/URB | 
|  | * if the length is > buffer size. (So, transmitting | 
|  | * large data amounts directly from the transfer buffer | 
|  | * treats the buffer as a ring buffer. However, we need | 
|  | * to sync in this case.) | 
|  | */ | 
|  | if (fromuser || fromkern) | 
|  | index = -1; | 
|  | else if (len > sisusb->obufsize) | 
|  | async = 0; | 
|  |  | 
|  | pipe = usb_sndbulkpipe(sisusb->sisusb_dev, ep); | 
|  |  | 
|  | do { | 
|  | passsize = thispass = (sisusb->obufsize < count) ? | 
|  | sisusb->obufsize : count; | 
|  |  | 
|  | if (index < 0) | 
|  | index = sisusb_get_free_outbuf(sisusb); | 
|  |  | 
|  | if (index < 0) | 
|  | return -EIO; | 
|  |  | 
|  | buffer = sisusb->obuf[index]; | 
|  |  | 
|  | if (fromuser) { | 
|  |  | 
|  | if (copy_from_user(buffer, userbuffer, passsize)) | 
|  | return -EFAULT; | 
|  |  | 
|  | userbuffer += passsize; | 
|  |  | 
|  | } else if (fromkern) { | 
|  |  | 
|  | memcpy(buffer, kernbuffer, passsize); | 
|  | kernbuffer += passsize; | 
|  |  | 
|  | } | 
|  |  | 
|  | retry = 5; | 
|  | while (thispass) { | 
|  |  | 
|  | if (!sisusb->sisusb_dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | result = sisusb_bulkout_msg(sisusb, | 
|  | index, | 
|  | pipe, | 
|  | buffer, | 
|  | thispass, | 
|  | &transferred_len, | 
|  | async ? 0 : 5 * HZ, | 
|  | tflags, | 
|  | sisusb->transfer_dma_out[index]); | 
|  |  | 
|  | if (result == -ETIMEDOUT) { | 
|  |  | 
|  | /* Will not happen if async */ | 
|  | if (!retry--) | 
|  | return -ETIME; | 
|  |  | 
|  | continue; | 
|  |  | 
|  | } else if ((result == 0) && !async && transferred_len) { | 
|  |  | 
|  | thispass -= transferred_len; | 
|  | if (thispass) { | 
|  | if (sisusb->transfer_dma_out) { | 
|  | /* If DMA, copy remaining | 
|  | * to beginning of buffer | 
|  | */ | 
|  | memcpy(buffer, | 
|  | buffer + transferred_len, | 
|  | thispass); | 
|  | } else { | 
|  | /* If not DMA, simply increase | 
|  | * the pointer | 
|  | */ | 
|  | buffer += transferred_len; | 
|  | } | 
|  | } | 
|  |  | 
|  | } else | 
|  | break; | 
|  | }; | 
|  |  | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | (*bytes_written) += passsize; | 
|  | count            -= passsize; | 
|  |  | 
|  | /* Force new allocation in next iteration */ | 
|  | if (fromuser || fromkern) | 
|  | index = -1; | 
|  |  | 
|  | } while (count > 0); | 
|  |  | 
|  | if (async) { | 
|  | #ifdef SISUSB_DONTSYNC | 
|  | (*bytes_written) = len; | 
|  | /* Some URBs/buffers might be busy */ | 
|  | #else | 
|  | sisusb_wait_all_out_complete(sisusb); | 
|  | (*bytes_written) = transferred_len; | 
|  | /* All URBs and all buffers are available */ | 
|  | #endif | 
|  | } | 
|  |  | 
|  | return ((*bytes_written) == len) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | /* Receive a bulk message of variable size | 
|  | * | 
|  | * To copy the data to userspace, give pointer to "userbuffer", | 
|  | * to copy to kernel memory, give "kernbuffer". One of them | 
|  | * MUST be set. (There is no technique for letting the caller | 
|  | * read directly from the ibuf.) | 
|  | * | 
|  | */ | 
|  |  | 
|  | static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, | 
|  | void *kernbuffer, char __user *userbuffer, ssize_t *bytes_read, | 
|  | unsigned int tflags) | 
|  | { | 
|  | int result = 0, retry, count = len; | 
|  | int bufsize, thispass, transferred_len; | 
|  | unsigned int pipe; | 
|  | char *buffer; | 
|  |  | 
|  | (*bytes_read) = 0; | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb || !sisusb->present || !sisusb->sisusb_dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | pipe = usb_rcvbulkpipe(sisusb->sisusb_dev, ep); | 
|  | buffer = sisusb->ibuf; | 
|  | bufsize = sisusb->ibufsize; | 
|  |  | 
|  | retry = 5; | 
|  |  | 
|  | #ifdef SISUSB_DONTSYNC | 
|  | if (!(sisusb_wait_all_out_complete(sisusb))) | 
|  | return -EIO; | 
|  | #endif | 
|  |  | 
|  | while (count > 0) { | 
|  |  | 
|  | if (!sisusb->sisusb_dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | thispass = (bufsize < count) ? bufsize : count; | 
|  |  | 
|  | result = sisusb_bulkin_msg(sisusb, | 
|  | pipe, | 
|  | buffer, | 
|  | thispass, | 
|  | &transferred_len, | 
|  | 5 * HZ, | 
|  | tflags, | 
|  | sisusb->transfer_dma_in); | 
|  |  | 
|  | if (transferred_len) | 
|  | thispass = transferred_len; | 
|  |  | 
|  | else if (result == -ETIMEDOUT) { | 
|  |  | 
|  | if (!retry--) | 
|  | return -ETIME; | 
|  |  | 
|  | continue; | 
|  |  | 
|  | } else | 
|  | return -EIO; | 
|  |  | 
|  |  | 
|  | if (thispass) { | 
|  |  | 
|  | (*bytes_read) += thispass; | 
|  | count         -= thispass; | 
|  |  | 
|  | if (userbuffer) { | 
|  |  | 
|  | if (copy_to_user(userbuffer, buffer, thispass)) | 
|  | return -EFAULT; | 
|  |  | 
|  | userbuffer += thispass; | 
|  |  | 
|  | } else { | 
|  |  | 
|  | memcpy(kernbuffer, buffer, thispass); | 
|  | kernbuffer += thispass; | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | return ((*bytes_read) == len) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | static int sisusb_send_packet(struct sisusb_usb_data *sisusb, int len, | 
|  | struct sisusb_packet *packet) | 
|  | { | 
|  | int ret; | 
|  | ssize_t bytes_transferred = 0; | 
|  | __le32 tmp; | 
|  |  | 
|  | if (len == 6) | 
|  | packet->data = 0; | 
|  |  | 
|  | #ifdef SISUSB_DONTSYNC | 
|  | if (!(sisusb_wait_all_out_complete(sisusb))) | 
|  | return 1; | 
|  | #endif | 
|  |  | 
|  | /* Eventually correct endianness */ | 
|  | SISUSB_CORRECT_ENDIANNESS_PACKET(packet); | 
|  |  | 
|  | /* 1. send the packet */ | 
|  | ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_GFX_OUT, len, | 
|  | (char *)packet, NULL, 0, &bytes_transferred, 0, 0); | 
|  |  | 
|  | if ((ret == 0) && (len == 6)) { | 
|  |  | 
|  | /* 2. if packet len == 6, it means we read, so wait for 32bit | 
|  | *    return value and write it to packet->data | 
|  | */ | 
|  | ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_GFX_IN, 4, | 
|  | (char *)&tmp, NULL, &bytes_transferred, 0); | 
|  |  | 
|  | packet->data = le32_to_cpu(tmp); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len, | 
|  | struct sisusb_packet *packet, | 
|  | unsigned int tflags) | 
|  | { | 
|  | int ret; | 
|  | ssize_t bytes_transferred = 0; | 
|  | __le32 tmp; | 
|  |  | 
|  | if (len == 6) | 
|  | packet->data = 0; | 
|  |  | 
|  | #ifdef SISUSB_DONTSYNC | 
|  | if (!(sisusb_wait_all_out_complete(sisusb))) | 
|  | return 1; | 
|  | #endif | 
|  |  | 
|  | /* Eventually correct endianness */ | 
|  | SISUSB_CORRECT_ENDIANNESS_PACKET(packet); | 
|  |  | 
|  | /* 1. send the packet */ | 
|  | ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_BRIDGE_OUT, len, | 
|  | (char *)packet, NULL, 0, &bytes_transferred, tflags, 0); | 
|  |  | 
|  | if ((ret == 0) && (len == 6)) { | 
|  |  | 
|  | /* 2. if packet len == 6, it means we read, so wait for 32bit | 
|  | *    return value and write it to packet->data | 
|  | */ | 
|  | ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_BRIDGE_IN, 4, | 
|  | (char *)&tmp, NULL, &bytes_transferred, 0); | 
|  |  | 
|  | packet->data = le32_to_cpu(tmp); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* access video memory and mmio (return 0 on success) */ | 
|  |  | 
|  | /* Low level */ | 
|  |  | 
|  | /* The following routines assume being used to transfer byte, word, | 
|  | * long etc. | 
|  | * This means that | 
|  | *   - the write routines expect "data" in machine endianness format. | 
|  | *     The data will be converted to leXX in sisusb_xxx_packet. | 
|  | *   - the read routines can expect read data in machine-endianess. | 
|  | */ | 
|  |  | 
|  | static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u8 data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret; | 
|  |  | 
|  | packet.header  = (1 << (addr & 3)) | (type << 6); | 
|  | packet.address = addr & ~3; | 
|  | packet.data    = data << ((addr & 3) << 3); | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_write_memio_word(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u16 data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header = (type << 6) | 0x0003; | 
|  | packet.data   = (u32)data; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 1: | 
|  | packet.header = (type << 6) | 0x0006; | 
|  | packet.data   = (u32)data << 8; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 2: | 
|  | packet.header = (type << 6) | 0x000c; | 
|  | packet.data   = (u32)data << 16; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 3: | 
|  | packet.header = (type << 6) | 0x0008; | 
|  | packet.data   = (u32)data << 24; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data   = (u32)data >> 8; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_write_memio_24bit(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u32 data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header  = (type << 6) | 0x0007; | 
|  | packet.data    = data & 0x00ffffff; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 1: | 
|  | packet.header  = (type << 6) | 0x000e; | 
|  | packet.data    = data << 8; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 2: | 
|  | packet.header  = (type << 6) | 0x000c; | 
|  | packet.data    = data << 16; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header  = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data    = (data >> 16) & 0x00ff; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 3: | 
|  | packet.header  = (type << 6) | 0x0008; | 
|  | packet.data    = data << 24; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header  = (type << 6) | 0x0003; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data    = (data >> 8) & 0xffff; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_write_memio_long(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u32 data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header  = (type << 6) | 0x000f; | 
|  | packet.data    = data; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 1: | 
|  | packet.header  = (type << 6) | 0x000e; | 
|  | packet.data    = data << 8; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header  = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data    = data >> 24; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 2: | 
|  | packet.header  = (type << 6) | 0x000c; | 
|  | packet.data    = data << 16; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header  = (type << 6) | 0x0003; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data    = data >> 16; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | break; | 
|  | case 3: | 
|  | packet.header  = (type << 6) | 0x0008; | 
|  | packet.data    = data << 24; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | packet.header  = (type << 6) | 0x0007; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | packet.data    = data >> 8; | 
|  | ret |= sisusb_send_packet(sisusb, 10, &packet); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* The xxx_bulk routines copy a buffer of variable size. They treat the | 
|  | * buffer as chars, therefore lsb/msb has to be corrected if using the | 
|  | * byte/word/long/etc routines for speed-up | 
|  | * | 
|  | * If data is from userland, set "userbuffer" (and clear "kernbuffer"), | 
|  | * if data is in kernel space, set "kernbuffer" (and clear "userbuffer"); | 
|  | * if neither "kernbuffer" nor "userbuffer" are given, it is assumed | 
|  | * that the data already is in the transfer buffer "sisusb->obuf[index]". | 
|  | */ | 
|  |  | 
|  | static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, | 
|  | char *kernbuffer, int length, | 
|  | const char __user *userbuffer, int index, | 
|  | ssize_t *bytes_written) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int  ret = 0; | 
|  | static int msgcount = 0; | 
|  | u8   swap8, fromkern = kernbuffer ? 1 : 0; | 
|  | u16  swap16; | 
|  | u32  swap32, flag = (length >> 28) & 1; | 
|  | char buf[4]; | 
|  |  | 
|  | /* if neither kernbuffer not userbuffer are given, assume | 
|  | * data in obuf | 
|  | */ | 
|  | if (!fromkern && !userbuffer) | 
|  | kernbuffer = sisusb->obuf[index]; | 
|  |  | 
|  | (*bytes_written = 0); | 
|  |  | 
|  | length &= 0x00ffffff; | 
|  |  | 
|  | while (length) { | 
|  |  | 
|  | switch (length) { | 
|  |  | 
|  | case 1: | 
|  | if (userbuffer) { | 
|  | if (get_user(swap8, (u8 __user *)userbuffer)) | 
|  | return -EFAULT; | 
|  | } else | 
|  | swap8 = kernbuffer[0]; | 
|  |  | 
|  | ret = sisusb_write_memio_byte(sisusb, | 
|  | SISUSB_TYPE_MEM, | 
|  | addr, swap8); | 
|  |  | 
|  | if (!ret) | 
|  | (*bytes_written)++; | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | case 2: | 
|  | if (userbuffer) { | 
|  | if (get_user(swap16, (u16 __user *)userbuffer)) | 
|  | return -EFAULT; | 
|  | } else | 
|  | swap16 = *((u16 *)kernbuffer); | 
|  |  | 
|  | ret = sisusb_write_memio_word(sisusb, | 
|  | SISUSB_TYPE_MEM, | 
|  | addr, | 
|  | swap16); | 
|  |  | 
|  | if (!ret) | 
|  | (*bytes_written) += 2; | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | case 3: | 
|  | if (userbuffer) { | 
|  | if (copy_from_user(&buf, userbuffer, 3)) | 
|  | return -EFAULT; | 
|  | #ifdef __BIG_ENDIAN | 
|  | swap32 = (buf[0] << 16) | | 
|  | (buf[1] <<  8) | | 
|  | buf[2]; | 
|  | #else | 
|  | swap32 = (buf[2] << 16) | | 
|  | (buf[1] <<  8) | | 
|  | buf[0]; | 
|  | #endif | 
|  | } else | 
|  | #ifdef __BIG_ENDIAN | 
|  | swap32 = (kernbuffer[0] << 16) | | 
|  | (kernbuffer[1] <<  8) | | 
|  | kernbuffer[2]; | 
|  | #else | 
|  | swap32 = (kernbuffer[2] << 16) | | 
|  | (kernbuffer[1] <<  8) | | 
|  | kernbuffer[0]; | 
|  | #endif | 
|  |  | 
|  | ret = sisusb_write_memio_24bit(sisusb, | 
|  | SISUSB_TYPE_MEM, | 
|  | addr, | 
|  | swap32); | 
|  |  | 
|  | if (!ret) | 
|  | (*bytes_written) += 3; | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | case 4: | 
|  | if (userbuffer) { | 
|  | if (get_user(swap32, (u32 __user *)userbuffer)) | 
|  | return -EFAULT; | 
|  | } else | 
|  | swap32 = *((u32 *)kernbuffer); | 
|  |  | 
|  | ret = sisusb_write_memio_long(sisusb, | 
|  | SISUSB_TYPE_MEM, | 
|  | addr, | 
|  | swap32); | 
|  | if (!ret) | 
|  | (*bytes_written) += 4; | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | default: | 
|  | if ((length & ~3) > 0x10000) { | 
|  |  | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001d4; | 
|  | packet.data    = addr; | 
|  | ret = sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001d0; | 
|  | packet.data    = (length & ~3); | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001c0; | 
|  | packet.data    = flag | 0x16; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | if (userbuffer) { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_LBULK_OUT, | 
|  | (length & ~3), | 
|  | NULL, userbuffer, 0, | 
|  | bytes_written, 0, 1); | 
|  | userbuffer += (*bytes_written); | 
|  | } else if (fromkern) { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_LBULK_OUT, | 
|  | (length & ~3), | 
|  | kernbuffer, NULL, 0, | 
|  | bytes_written, 0, 1); | 
|  | kernbuffer += (*bytes_written); | 
|  | } else { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_LBULK_OUT, | 
|  | (length & ~3), | 
|  | NULL, NULL, index, | 
|  | bytes_written, 0, 1); | 
|  | kernbuffer += ((*bytes_written) & | 
|  | (sisusb->obufsize-1)); | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000194; | 
|  | packet.data    = addr; | 
|  | ret = sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000190; | 
|  | packet.data    = (length & ~3); | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | if (sisusb->flagb0 != 0x16) { | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000180; | 
|  | packet.data    = flag | 0x16; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | sisusb->flagb0 = 0x16; | 
|  | } | 
|  | if (userbuffer) { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_BULK_OUT, | 
|  | (length & ~3), | 
|  | NULL, userbuffer, 0, | 
|  | bytes_written, 0, 1); | 
|  | userbuffer += (*bytes_written); | 
|  | } else if (fromkern) { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_BULK_OUT, | 
|  | (length & ~3), | 
|  | kernbuffer, NULL, 0, | 
|  | bytes_written, 0, 1); | 
|  | kernbuffer += (*bytes_written); | 
|  | } else { | 
|  | ret |= sisusb_send_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_BULK_OUT, | 
|  | (length & ~3), | 
|  | NULL, NULL, index, | 
|  | bytes_written, 0, 1); | 
|  | kernbuffer += ((*bytes_written) & | 
|  | (sisusb->obufsize-1)); | 
|  | } | 
|  | } | 
|  | if (ret) { | 
|  | msgcount++; | 
|  | if (msgcount < 500) | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Wrote %zd of " | 
|  | "%d bytes, error %d\n", | 
|  | sisusb->minor, *bytes_written, | 
|  | length, ret); | 
|  | else if (msgcount == 500) | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Too many errors" | 
|  | ", logging stopped\n", | 
|  | sisusb->minor); | 
|  | } | 
|  | addr += (*bytes_written); | 
|  | length -= (*bytes_written); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | return ret ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | /* Remember: Read data in packet is in machine-endianess! So for | 
|  | * byte, word, 24bit, long no endian correction is necessary. | 
|  | */ | 
|  |  | 
|  | static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u8 *data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret; | 
|  |  | 
|  | CLEARPACKET(&packet); | 
|  | packet.header  = (1 << (addr & 3)) | (type << 6); | 
|  | packet.address = addr & ~3; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = (u8)(packet.data >> ((addr & 3) << 3)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_read_memio_word(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u16 *data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | CLEARPACKET(&packet); | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header = (type << 6) | 0x0003; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = (u16)(packet.data); | 
|  | break; | 
|  | case 1: | 
|  | packet.header = (type << 6) | 0x0006; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = (u16)(packet.data >> 8); | 
|  | break; | 
|  | case 2: | 
|  | packet.header = (type << 6) | 0x000c; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = (u16)(packet.data >> 16); | 
|  | break; | 
|  | case 3: | 
|  | packet.header = (type << 6) | 0x0008; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = (u16)(packet.data >> 24); | 
|  | packet.header = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= (u16)(packet.data << 8); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_read_memio_24bit(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u32 *data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header  = (type << 6) | 0x0007; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data & 0x00ffffff; | 
|  | break; | 
|  | case 1: | 
|  | packet.header  = (type << 6) | 0x000e; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 8; | 
|  | break; | 
|  | case 2: | 
|  | packet.header  = (type << 6) | 0x000c; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 16; | 
|  | packet.header  = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= ((packet.data & 0xff) << 16); | 
|  | break; | 
|  | case 3: | 
|  | packet.header  = (type << 6) | 0x0008; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 24; | 
|  | packet.header  = (type << 6) | 0x0003; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= ((packet.data & 0xffff) << 8); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_read_memio_long(struct sisusb_usb_data *sisusb, int type, | 
|  | u32 addr, u32 *data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret = 0; | 
|  |  | 
|  | packet.address = addr & ~3; | 
|  |  | 
|  | switch (addr & 3) { | 
|  | case 0: | 
|  | packet.header  = (type << 6) | 0x000f; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data; | 
|  | break; | 
|  | case 1: | 
|  | packet.header  = (type << 6) | 0x000e; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 8; | 
|  | packet.header  = (type << 6) | 0x0001; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= (packet.data << 24); | 
|  | break; | 
|  | case 2: | 
|  | packet.header  = (type << 6) | 0x000c; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 16; | 
|  | packet.header  = (type << 6) | 0x0003; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= (packet.data << 16); | 
|  | break; | 
|  | case 3: | 
|  | packet.header  = (type << 6) | 0x0008; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data >> 24; | 
|  | packet.header  = (type << 6) | 0x0007; | 
|  | packet.address = (addr & ~3) + 4; | 
|  | ret |= sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data |= (packet.data << 8); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, | 
|  | char *kernbuffer, int length, | 
|  | char __user *userbuffer, ssize_t *bytes_read) | 
|  | { | 
|  | int ret = 0; | 
|  | char buf[4]; | 
|  | u16 swap16; | 
|  | u32 swap32; | 
|  |  | 
|  | (*bytes_read = 0); | 
|  |  | 
|  | length &= 0x00ffffff; | 
|  |  | 
|  | while (length) { | 
|  |  | 
|  | switch (length) { | 
|  |  | 
|  | case 1: | 
|  |  | 
|  | ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, | 
|  | addr, &buf[0]); | 
|  | if (!ret) { | 
|  | (*bytes_read)++; | 
|  | if (userbuffer) { | 
|  | if (put_user(buf[0], | 
|  | (u8 __user *)userbuffer)) { | 
|  | return -EFAULT; | 
|  | } | 
|  | } else { | 
|  | kernbuffer[0] = buf[0]; | 
|  | } | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | case 2: | 
|  | ret |= sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, | 
|  | addr, &swap16); | 
|  | if (!ret) { | 
|  | (*bytes_read) += 2; | 
|  | if (userbuffer) { | 
|  | if (put_user(swap16, | 
|  | (u16 __user *)userbuffer)) | 
|  | return -EFAULT; | 
|  | } else { | 
|  | *((u16 *)kernbuffer) = swap16; | 
|  | } | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | case 3: | 
|  | ret |= sisusb_read_memio_24bit(sisusb, SISUSB_TYPE_MEM, | 
|  | addr, &swap32); | 
|  | if (!ret) { | 
|  | (*bytes_read) += 3; | 
|  | #ifdef __BIG_ENDIAN | 
|  | buf[0] = (swap32 >> 16) & 0xff; | 
|  | buf[1] = (swap32 >> 8) & 0xff; | 
|  | buf[2] = swap32 & 0xff; | 
|  | #else | 
|  | buf[2] = (swap32 >> 16) & 0xff; | 
|  | buf[1] = (swap32 >> 8) & 0xff; | 
|  | buf[0] = swap32 & 0xff; | 
|  | #endif | 
|  | if (userbuffer) { | 
|  | if (copy_to_user(userbuffer, &buf[0], 3)) | 
|  | return -EFAULT; | 
|  | } else { | 
|  | kernbuffer[0] = buf[0]; | 
|  | kernbuffer[1] = buf[1]; | 
|  | kernbuffer[2] = buf[2]; | 
|  | } | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | default: | 
|  | ret |= sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, | 
|  | addr, &swap32); | 
|  | if (!ret) { | 
|  | (*bytes_read) += 4; | 
|  | if (userbuffer) { | 
|  | if (put_user(swap32, | 
|  | (u32 __user *)userbuffer)) | 
|  | return -EFAULT; | 
|  |  | 
|  | userbuffer += 4; | 
|  | } else { | 
|  | *((u32 *)kernbuffer) = swap32; | 
|  | kernbuffer += 4; | 
|  | } | 
|  | addr += 4; | 
|  | length -= 4; | 
|  | } | 
|  | #if 0		/* That does not work, as EP 2 is an OUT EP! */ | 
|  | default: | 
|  | CLEARPACKET(&packet); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001a0; | 
|  | packet.data    = 0x00000006; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001b0; | 
|  | packet.data    = (length & ~3) | 0x40000000; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001b4; | 
|  | packet.data    = addr; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x000001a4; | 
|  | packet.data    = 0x00000001; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, | 
|  | &packet, 0); | 
|  | if (userbuffer) { | 
|  | ret |= sisusb_recv_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_BULK_IN, | 
|  | (length & ~3), | 
|  | NULL, userbuffer, | 
|  | bytes_read, 0); | 
|  | if (!ret) userbuffer += (*bytes_read); | 
|  | } else { | 
|  | ret |= sisusb_recv_bulk_msg(sisusb, | 
|  | SISUSB_EP_GFX_BULK_IN, | 
|  | (length & ~3), | 
|  | kernbuffer, NULL, | 
|  | bytes_read, 0); | 
|  | if (!ret) kernbuffer += (*bytes_read); | 
|  | } | 
|  | addr += (*bytes_read); | 
|  | length -= (*bytes_read); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* High level: Gfx (indexed) register access */ | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | int | 
|  | sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data) | 
|  | { | 
|  | return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data); | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data) | 
|  | { | 
|  | return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int | 
|  | sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data) | 
|  | { | 
|  | int ret; | 
|  | ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index); | 
|  | ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data) | 
|  | { | 
|  | int ret; | 
|  | ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index); | 
|  | ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx, | 
|  | u8 myand, u8 myor) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp; | 
|  |  | 
|  | ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx); | 
|  | ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp); | 
|  | tmp &= myand; | 
|  | tmp |= myor; | 
|  | ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_setidxregmask(struct sisusb_usb_data *sisusb, int port, u8 idx, | 
|  | u8 data, u8 mask) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp; | 
|  | ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx); | 
|  | ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp); | 
|  | tmp &= ~(mask); | 
|  | tmp |= (data & mask); | 
|  | ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor) | 
|  | { | 
|  | return(sisusb_setidxregandor(sisusb, port, index, 0xff, myor)); | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand) | 
|  | { | 
|  | return(sisusb_setidxregandor(sisusb, port, idx, myand, 0x00)); | 
|  | } | 
|  |  | 
|  | /* Write/read video ram */ | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | int | 
|  | sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data) | 
|  | { | 
|  | return(sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data)); | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data) | 
|  | { | 
|  | return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data)); | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  |  | 
|  | int | 
|  | sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data) | 
|  | { | 
|  | return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data)); | 
|  | } | 
|  |  | 
|  | int | 
|  | sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data) | 
|  | { | 
|  | return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data)); | 
|  | } | 
|  |  | 
|  | #endif  /*  0  */ | 
|  |  | 
|  | int | 
|  | sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src, | 
|  | u32 dest, int length, size_t *bytes_written) | 
|  | { | 
|  | return(sisusb_write_mem_bulk(sisusb, dest, src, length, NULL, 0, bytes_written)); | 
|  | } | 
|  |  | 
|  | #ifdef SISUSBENDIANTEST | 
|  | int | 
|  | sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest, | 
|  | u32 src, int length, size_t *bytes_written) | 
|  | { | 
|  | return(sisusb_read_mem_bulk(sisusb, src, dest, length, NULL, bytes_written)); | 
|  | } | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #ifdef SISUSBENDIANTEST | 
|  | static void | 
|  | sisusb_testreadwrite(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | static char srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 }; | 
|  | char destbuffer[10]; | 
|  | size_t dummy; | 
|  | int i,j; | 
|  |  | 
|  | sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy); | 
|  |  | 
|  | for(i = 1; i <= 7; i++) { | 
|  | printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i); | 
|  | sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy); | 
|  | for(j = 0; j < i; j++) { | 
|  | printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]); | 
|  | } | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* access pci config registers (reg numbers 0, 4, 8, etc) */ | 
|  |  | 
|  | static int | 
|  | sisusb_write_pci_config(struct sisusb_usb_data *sisusb, int regnum, u32 data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret; | 
|  |  | 
|  | packet.header = 0x008f; | 
|  | packet.address = regnum | 0x10000; | 
|  | packet.data = data; | 
|  | ret = sisusb_send_packet(sisusb, 10, &packet); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_read_pci_config(struct sisusb_usb_data *sisusb, int regnum, u32 *data) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret; | 
|  |  | 
|  | packet.header = 0x008f; | 
|  | packet.address = (u32)regnum | 0x10000; | 
|  | ret = sisusb_send_packet(sisusb, 6, &packet); | 
|  | *data = packet.data; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Clear video RAM */ | 
|  |  | 
|  | static int | 
|  | sisusb_clear_vram(struct sisusb_usb_data *sisusb, u32 address, int length) | 
|  | { | 
|  | int ret, i; | 
|  | ssize_t j; | 
|  |  | 
|  | if (address < sisusb->vrambase) | 
|  | return 1; | 
|  |  | 
|  | if (address >= sisusb->vrambase + sisusb->vramsize) | 
|  | return 1; | 
|  |  | 
|  | if (address + length > sisusb->vrambase + sisusb->vramsize) | 
|  | length = sisusb->vrambase + sisusb->vramsize - address; | 
|  |  | 
|  | if (length <= 0) | 
|  | return 0; | 
|  |  | 
|  | /* allocate free buffer/urb and clear the buffer */ | 
|  | if ((i = sisusb_alloc_outbuf(sisusb)) < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | memset(sisusb->obuf[i], 0, sisusb->obufsize); | 
|  |  | 
|  | /* We can write a length > buffer size here. The buffer | 
|  | * data will simply be re-used (like a ring-buffer). | 
|  | */ | 
|  | ret = sisusb_write_mem_bulk(sisusb, address, NULL, length, NULL, i, &j); | 
|  |  | 
|  | /* Free the buffer/urb */ | 
|  | sisusb_free_outbuf(sisusb, i); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Initialize the graphics core (return 0 on success) | 
|  | * This resets the graphics hardware and puts it into | 
|  | * a defined mode (640x480@60Hz) | 
|  | */ | 
|  |  | 
|  | #define GETREG(r,d)     sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, r, d) | 
|  | #define SETREG(r,d)	sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, r, d) | 
|  | #define SETIREG(r,i,d)	sisusb_setidxreg(sisusb, r, i, d) | 
|  | #define GETIREG(r,i,d)  sisusb_getidxreg(sisusb, r, i, d) | 
|  | #define SETIREGOR(r,i,o)	sisusb_setidxregor(sisusb, r, i, o) | 
|  | #define SETIREGAND(r,i,a)	sisusb_setidxregand(sisusb, r, i, a) | 
|  | #define SETIREGANDOR(r,i,a,o)	sisusb_setidxregandor(sisusb, r, i, a, o) | 
|  | #define READL(a,d)	sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d) | 
|  | #define WRITEL(a,d) 	sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d) | 
|  | #define READB(a,d)	sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d) | 
|  | #define WRITEB(a,d) 	sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d) | 
|  |  | 
|  | static int | 
|  | sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp8; | 
|  |  | 
|  | ret = GETIREG(SISSR, 0x16, &tmp8); | 
|  | if (ramtype <= 1) { | 
|  | tmp8 &= 0x3f; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 |= 0x80; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | } else { | 
|  | tmp8 |= 0xc0; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 &= 0x0f; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 |= 0x80; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 &= 0x0f; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 |= 0xd0; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 &= 0x0f; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | tmp8 |= 0xa0; | 
|  | ret |= SETIREG(SISSR, 0x16, tmp8); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_getbuswidth(struct sisusb_usb_data *sisusb, int *bw, int *chab) | 
|  | { | 
|  | int ret; | 
|  | u8  ramtype, done = 0; | 
|  | u32 t0, t1, t2, t3; | 
|  | u32 ramptr = SISUSB_PCI_MEMBASE; | 
|  |  | 
|  | ret = GETIREG(SISSR, 0x3a, &ramtype); | 
|  | ramtype &= 3; | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x13, 0x00); | 
|  |  | 
|  | if (ramtype <= 1) { | 
|  | ret |= SETIREG(SISSR, 0x14, 0x12); | 
|  | ret |= SETIREGAND(SISSR, 0x15, 0xef); | 
|  | } else { | 
|  | ret |= SETIREG(SISSR, 0x14, 0x02); | 
|  | } | 
|  |  | 
|  | ret |= sisusb_triggersr16(sisusb, ramtype); | 
|  | ret |= WRITEL(ramptr +  0, 0x01234567); | 
|  | ret |= WRITEL(ramptr +  4, 0x456789ab); | 
|  | ret |= WRITEL(ramptr +  8, 0x89abcdef); | 
|  | ret |= WRITEL(ramptr + 12, 0xcdef0123); | 
|  | ret |= WRITEL(ramptr + 16, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 20, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 24, 0xffffffff); | 
|  | ret |= WRITEL(ramptr + 28, 0xffffffff); | 
|  | ret |= READL(ramptr +  0, &t0); | 
|  | ret |= READL(ramptr +  4, &t1); | 
|  | ret |= READL(ramptr +  8, &t2); | 
|  | ret |= READL(ramptr + 12, &t3); | 
|  |  | 
|  | if (ramtype <= 1) { | 
|  |  | 
|  | *chab = 0; *bw = 64; | 
|  |  | 
|  | if ((t3 != 0xcdef0123) || (t2 != 0x89abcdef)) { | 
|  | if ((t1 == 0x456789ab) && (t0 == 0x01234567)) { | 
|  | *chab = 0; *bw = 64; | 
|  | ret |= SETIREGAND(SISSR, 0x14, 0xfd); | 
|  | } | 
|  | } | 
|  | if ((t1 != 0x456789ab) || (t0 != 0x01234567)) { | 
|  | *chab = 1; *bw = 64; | 
|  | ret |= SETIREGANDOR(SISSR, 0x14, 0xfc,0x01); | 
|  |  | 
|  | ret |= sisusb_triggersr16(sisusb, ramtype); | 
|  | ret |= WRITEL(ramptr +  0, 0x89abcdef); | 
|  | ret |= WRITEL(ramptr +  4, 0xcdef0123); | 
|  | ret |= WRITEL(ramptr +  8, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 12, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 16, 0xaaaaaaaa); | 
|  | ret |= WRITEL(ramptr + 20, 0xaaaaaaaa); | 
|  | ret |= READL(ramptr +  4, &t1); | 
|  |  | 
|  | if (t1 != 0xcdef0123) { | 
|  | *bw = 32; | 
|  | ret |= SETIREGOR(SISSR, 0x15, 0x10); | 
|  | } | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | *chab = 0; *bw = 64;	/* default: cha, bw = 64 */ | 
|  |  | 
|  | done = 0; | 
|  |  | 
|  | if (t1 == 0x456789ab) { | 
|  | if (t0 == 0x01234567) { | 
|  | *chab = 0; *bw = 64; | 
|  | done = 1; | 
|  | } | 
|  | } else { | 
|  | if (t0 == 0x01234567) { | 
|  | *chab = 0; *bw = 32; | 
|  | ret |= SETIREG(SISSR, 0x14, 0x00); | 
|  | done = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!done) { | 
|  | ret |= SETIREG(SISSR, 0x14, 0x03); | 
|  | ret |= sisusb_triggersr16(sisusb, ramtype); | 
|  |  | 
|  | ret |= WRITEL(ramptr +  0, 0x01234567); | 
|  | ret |= WRITEL(ramptr +  4, 0x456789ab); | 
|  | ret |= WRITEL(ramptr +  8, 0x89abcdef); | 
|  | ret |= WRITEL(ramptr + 12, 0xcdef0123); | 
|  | ret |= WRITEL(ramptr + 16, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 20, 0x55555555); | 
|  | ret |= WRITEL(ramptr + 24, 0xffffffff); | 
|  | ret |= WRITEL(ramptr + 28, 0xffffffff); | 
|  | ret |= READL(ramptr +  0, &t0); | 
|  | ret |= READL(ramptr +  4, &t1); | 
|  |  | 
|  | if (t1 == 0x456789ab) { | 
|  | if (t0 == 0x01234567) { | 
|  | *chab = 1; *bw = 64; | 
|  | return ret; | 
|  | } /* else error */ | 
|  | } else { | 
|  | if (t0 == 0x01234567) { | 
|  | *chab = 1; *bw = 32; | 
|  | ret |= SETIREG(SISSR, 0x14, 0x01); | 
|  | } /* else error */ | 
|  | } | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_verify_mclk(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 ramptr = SISUSB_PCI_MEMBASE; | 
|  | u8 tmp1, tmp2, i, j; | 
|  |  | 
|  | ret |= WRITEB(ramptr, 0xaa); | 
|  | ret |= WRITEB(ramptr + 16, 0x55); | 
|  | ret |= READB(ramptr, &tmp1); | 
|  | ret |= READB(ramptr + 16, &tmp2); | 
|  | if ((tmp1 != 0xaa) || (tmp2 != 0x55)) { | 
|  | for (i = 0, j = 16; i < 2; i++, j += 16) { | 
|  | ret |= GETIREG(SISSR, 0x21, &tmp1); | 
|  | ret |= SETIREGAND(SISSR, 0x21, (tmp1 & 0xfb)); | 
|  | ret |= SETIREGOR(SISSR, 0x3c, 0x01);  /* not on 330 */ | 
|  | ret |= SETIREGAND(SISSR, 0x3c, 0xfe); /* not on 330 */ | 
|  | ret |= SETIREG(SISSR, 0x21, tmp1); | 
|  | ret |= WRITEB(ramptr + 16 + j, j); | 
|  | ret |= READB(ramptr + 16 + j, &tmp1); | 
|  | if (tmp1 == j) { | 
|  | ret |= WRITEB(ramptr + j, j); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_set_rank(struct sisusb_usb_data *sisusb, int *iret, int index, | 
|  | u8 rankno, u8 chab, const u8 dramtype[][5], | 
|  | int bw) | 
|  | { | 
|  | int ret = 0, ranksize; | 
|  | u8 tmp; | 
|  |  | 
|  | *iret = 0; | 
|  |  | 
|  | if ((rankno == 2) && (dramtype[index][0] == 2)) | 
|  | return ret; | 
|  |  | 
|  | ranksize = dramtype[index][3] / 2 * bw / 32; | 
|  |  | 
|  | if ((ranksize * rankno) > 128) | 
|  | return ret; | 
|  |  | 
|  | tmp = 0; | 
|  | while ((ranksize >>= 1) > 0) tmp += 0x10; | 
|  | tmp |= ((rankno - 1) << 2); | 
|  | tmp |= ((bw / 64) & 0x02); | 
|  | tmp |= (chab & 0x01); | 
|  |  | 
|  | ret = SETIREG(SISSR, 0x14, tmp); | 
|  | ret |= sisusb_triggersr16(sisusb, 0); /* sic! */ | 
|  |  | 
|  | *iret = 1; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_check_rbc(struct sisusb_usb_data *sisusb, int *iret, u32 inc, int testn) | 
|  | { | 
|  | int ret = 0, i; | 
|  | u32 j, tmp; | 
|  |  | 
|  | *iret = 0; | 
|  |  | 
|  | for (i = 0, j = 0; i < testn; i++) { | 
|  | ret |= WRITEL(sisusb->vrambase + j, j); | 
|  | j += inc; | 
|  | } | 
|  |  | 
|  | for (i = 0, j = 0; i < testn; i++) { | 
|  | ret |= READL(sisusb->vrambase + j, &tmp); | 
|  | if (tmp != j) return ret; | 
|  | j += inc; | 
|  | } | 
|  |  | 
|  | *iret = 1; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_check_ranks(struct sisusb_usb_data *sisusb, int *iret, int rankno, | 
|  | int idx, int bw, const u8 rtype[][5]) | 
|  | { | 
|  | int ret = 0, i, i2ret; | 
|  | u32 inc; | 
|  |  | 
|  | *iret = 0; | 
|  |  | 
|  | for (i = rankno; i >= 1; i--) { | 
|  | inc = 1 << (rtype[idx][2] + | 
|  | rtype[idx][1] + | 
|  | rtype[idx][0] + | 
|  | bw / 64 + i); | 
|  | ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2); | 
|  | if (!i2ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | inc = 1 << (rtype[idx][2] + bw / 64 + 2); | 
|  | ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 4); | 
|  | if (!i2ret) | 
|  | return ret; | 
|  |  | 
|  | inc = 1 << (10 + bw / 64); | 
|  | ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2); | 
|  | if (!i2ret) | 
|  | return ret; | 
|  |  | 
|  | *iret = 1; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_get_sdram_size(struct sisusb_usb_data *sisusb, int *iret, int bw, | 
|  | int chab) | 
|  | { | 
|  | int ret = 0, i2ret = 0, i, j; | 
|  | static const u8 sdramtype[13][5] = { | 
|  | { 2, 12, 9, 64, 0x35 }, | 
|  | { 1, 13, 9, 64, 0x44 }, | 
|  | { 2, 12, 8, 32, 0x31 }, | 
|  | { 2, 11, 9, 32, 0x25 }, | 
|  | { 1, 12, 9, 32, 0x34 }, | 
|  | { 1, 13, 8, 32, 0x40 }, | 
|  | { 2, 11, 8, 16, 0x21 }, | 
|  | { 1, 12, 8, 16, 0x30 }, | 
|  | { 1, 11, 9, 16, 0x24 }, | 
|  | { 1, 11, 8,  8, 0x20 }, | 
|  | { 2,  9, 8,  4, 0x01 }, | 
|  | { 1, 10, 8,  4, 0x10 }, | 
|  | { 1,  9, 8,  2, 0x00 } | 
|  | }; | 
|  |  | 
|  | *iret = 1; /* error */ | 
|  |  | 
|  | for (i = 0; i < 13; i++) { | 
|  | ret |= SETIREGANDOR(SISSR, 0x13, 0x80, sdramtype[i][4]); | 
|  | for (j = 2; j > 0; j--) { | 
|  | ret |= sisusb_set_rank(sisusb, &i2ret, i, j, | 
|  | chab, sdramtype, bw); | 
|  | if (!i2ret) | 
|  | continue; | 
|  |  | 
|  | ret |= sisusb_check_ranks(sisusb, &i2ret, j, i, | 
|  | bw, sdramtype); | 
|  | if (i2ret) { | 
|  | *iret = 0;	/* ram size found */ | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_setup_screen(struct sisusb_usb_data *sisusb, int clrall, int drwfr) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 address; | 
|  | int i, length, modex, modey, bpp; | 
|  |  | 
|  | modex = 640; modey = 480; bpp = 2; | 
|  |  | 
|  | address = sisusb->vrambase;	/* Clear video ram */ | 
|  |  | 
|  | if (clrall) | 
|  | length = sisusb->vramsize; | 
|  | else | 
|  | length = modex * bpp * modey; | 
|  |  | 
|  | ret = sisusb_clear_vram(sisusb, address, length); | 
|  |  | 
|  | if (!ret && drwfr) { | 
|  | for (i = 0; i < modex; i++) { | 
|  | address = sisusb->vrambase + (i * bpp); | 
|  | ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, | 
|  | address, 0xf100); | 
|  | address += (modex * (modey-1) * bpp); | 
|  | ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, | 
|  | address, 0xf100); | 
|  | } | 
|  | for (i = 0; i < modey; i++) { | 
|  | address = sisusb->vrambase + ((i * modex) * bpp); | 
|  | ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, | 
|  | address, 0xf100); | 
|  | address += ((modex - 1) * bpp); | 
|  | ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, | 
|  | address, 0xf100); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_set_default_mode(struct sisusb_usb_data *sisusb, int touchengines) | 
|  | { | 
|  | int ret = 0, i, j, modex, modey, bpp, du; | 
|  | u8 sr31, cr63, tmp8; | 
|  | static const char attrdata[] = { | 
|  | 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, | 
|  | 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, | 
|  | 0x01,0x00,0x00,0x00 | 
|  | }; | 
|  | static const char crtcrdata[] = { | 
|  | 0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e, | 
|  | 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00, | 
|  | 0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3, | 
|  | 0xff | 
|  | }; | 
|  | static const char grcdata[] = { | 
|  | 0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f, | 
|  | 0xff | 
|  | }; | 
|  | static const char crtcdata[] = { | 
|  | 0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e, | 
|  | 0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05, | 
|  | 0x00 | 
|  | }; | 
|  |  | 
|  | modex = 640; modey = 480; bpp = 2; | 
|  |  | 
|  | GETIREG(SISSR, 0x31, &sr31); | 
|  | GETIREG(SISCR, 0x63, &cr63); | 
|  | SETIREGOR(SISSR, 0x01, 0x20); | 
|  | SETIREG(SISCR, 0x63, cr63 & 0xbf); | 
|  | SETIREGOR(SISCR, 0x17, 0x80); | 
|  | SETIREGOR(SISSR, 0x1f, 0x04); | 
|  | SETIREGAND(SISSR, 0x07, 0xfb); | 
|  | SETIREG(SISSR, 0x00, 0x03);	/* seq */ | 
|  | SETIREG(SISSR, 0x01, 0x21); | 
|  | SETIREG(SISSR, 0x02, 0x0f); | 
|  | SETIREG(SISSR, 0x03, 0x00); | 
|  | SETIREG(SISSR, 0x04, 0x0e); | 
|  | SETREG(SISMISCW, 0x23);		/* misc */ | 
|  | for (i = 0; i <= 0x18; i++) {	/* crtc */ | 
|  | SETIREG(SISCR, i, crtcrdata[i]); | 
|  | } | 
|  | for (i = 0; i <= 0x13; i++) {	/* att */ | 
|  | GETREG(SISINPSTAT, &tmp8); | 
|  | SETREG(SISAR, i); | 
|  | SETREG(SISAR, attrdata[i]); | 
|  | } | 
|  | GETREG(SISINPSTAT, &tmp8); | 
|  | SETREG(SISAR, 0x14); | 
|  | SETREG(SISAR, 0x00); | 
|  | GETREG(SISINPSTAT, &tmp8); | 
|  | SETREG(SISAR, 0x20); | 
|  | GETREG(SISINPSTAT, &tmp8); | 
|  | for (i = 0; i <= 0x08; i++) {	/* grc */ | 
|  | SETIREG(SISGR, i, grcdata[i]); | 
|  | } | 
|  | SETIREGAND(SISGR, 0x05, 0xbf); | 
|  | for (i = 0x0A; i <= 0x0E; i++) {	/* clr ext */ | 
|  | SETIREG(SISSR, i, 0x00); | 
|  | } | 
|  | SETIREGAND(SISSR, 0x37, 0xfe); | 
|  | SETREG(SISMISCW, 0xef);		/* sync */ | 
|  | SETIREG(SISCR, 0x11, 0x00);	/* crtc */ | 
|  | for (j = 0x00, i = 0; i <= 7; i++, j++) { | 
|  | SETIREG(SISCR, j, crtcdata[i]); | 
|  | } | 
|  | for (j = 0x10; i <= 10; i++, j++) { | 
|  | SETIREG(SISCR, j, crtcdata[i]); | 
|  | } | 
|  | for (j = 0x15; i <= 12; i++, j++) { | 
|  | SETIREG(SISCR, j, crtcdata[i]); | 
|  | } | 
|  | for (j = 0x0A; i <= 15; i++, j++) { | 
|  | SETIREG(SISSR, j, crtcdata[i]); | 
|  | } | 
|  | SETIREG(SISSR, 0x0E, (crtcdata[16] & 0xE0)); | 
|  | SETIREGANDOR(SISCR, 0x09, 0x5f, ((crtcdata[16] & 0x01) << 5)); | 
|  | SETIREG(SISCR, 0x14, 0x4f); | 
|  | du = (modex / 16) * (bpp * 2);	/* offset/pitch */ | 
|  | if (modex % 16) du += bpp; | 
|  | SETIREGANDOR(SISSR, 0x0e, 0xf0, ((du >> 8) & 0x0f)); | 
|  | SETIREG(SISCR, 0x13, (du & 0xff)); | 
|  | du <<= 5; | 
|  | tmp8 = du >> 8; | 
|  | if (du & 0xff) tmp8++; | 
|  | SETIREG(SISSR, 0x10, tmp8); | 
|  | SETIREG(SISSR, 0x31, 0x00);	/* VCLK */ | 
|  | SETIREG(SISSR, 0x2b, 0x1b); | 
|  | SETIREG(SISSR, 0x2c, 0xe1); | 
|  | SETIREG(SISSR, 0x2d, 0x01); | 
|  | SETIREGAND(SISSR, 0x3d, 0xfe);	/* FIFO */ | 
|  | SETIREG(SISSR, 0x08, 0xae); | 
|  | SETIREGAND(SISSR, 0x09, 0xf0); | 
|  | SETIREG(SISSR, 0x08, 0x34); | 
|  | SETIREGOR(SISSR, 0x3d, 0x01); | 
|  | SETIREGAND(SISSR, 0x1f, 0x3f);	/* mode regs */ | 
|  | SETIREGANDOR(SISSR, 0x06, 0xc0, 0x0a); | 
|  | SETIREG(SISCR, 0x19, 0x00); | 
|  | SETIREGAND(SISCR, 0x1a, 0xfc); | 
|  | SETIREGAND(SISSR, 0x0f, 0xb7); | 
|  | SETIREGAND(SISSR, 0x31, 0xfb); | 
|  | SETIREGANDOR(SISSR, 0x21, 0x1f, 0xa0); | 
|  | SETIREGAND(SISSR, 0x32, 0xf3); | 
|  | SETIREGANDOR(SISSR, 0x07, 0xf8, 0x03); | 
|  | SETIREG(SISCR, 0x52, 0x6c); | 
|  |  | 
|  | SETIREG(SISCR, 0x0d, 0x00);	/* adjust frame */ | 
|  | SETIREG(SISCR, 0x0c, 0x00); | 
|  | SETIREG(SISSR, 0x0d, 0x00); | 
|  | SETIREGAND(SISSR, 0x37, 0xfe); | 
|  |  | 
|  | SETIREG(SISCR, 0x32, 0x20); | 
|  | SETIREGAND(SISSR, 0x01, 0xdf);	/* enable display */ | 
|  | SETIREG(SISCR, 0x63, (cr63 & 0xbf)); | 
|  | SETIREG(SISSR, 0x31, (sr31 & 0xfb)); | 
|  |  | 
|  | if (touchengines) { | 
|  | SETIREG(SISSR, 0x20, 0xa1);	/* enable engines */ | 
|  | SETIREGOR(SISSR, 0x1e, 0x5a); | 
|  |  | 
|  | SETIREG(SISSR, 0x26, 0x01);	/* disable cmdqueue */ | 
|  | SETIREG(SISSR, 0x27, 0x1f); | 
|  | SETIREG(SISSR, 0x26, 0x00); | 
|  | } | 
|  |  | 
|  | SETIREG(SISCR, 0x34, 0x44);  	/* we just set std mode #44 */ | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_init_gfxcore(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | int ret = 0, i, j, bw, chab, iret, retry = 3; | 
|  | u8 tmp8, ramtype; | 
|  | u32 tmp32; | 
|  | static const char mclktable[] = { | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143 | 
|  | }; | 
|  | static const char eclktable[] = { | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143, | 
|  | 0x3b, 0x22, 0x01, 143 | 
|  | }; | 
|  | static const char ramtypetable1[] = { | 
|  | 0x00, 0x04, 0x60, 0x60, | 
|  | 0x0f, 0x0f, 0x1f, 0x1f, | 
|  | 0xba, 0xba, 0xba, 0xba, | 
|  | 0xa9, 0xa9, 0xac, 0xac, | 
|  | 0xa0, 0xa0, 0xa0, 0xa8, | 
|  | 0x00, 0x00, 0x02, 0x02, | 
|  | 0x30, 0x30, 0x40, 0x40 | 
|  | }; | 
|  | static const char ramtypetable2[] = { | 
|  | 0x77, 0x77, 0x44, 0x44, | 
|  | 0x77, 0x77, 0x44, 0x44, | 
|  | 0x00, 0x00, 0x00, 0x00, | 
|  | 0x5b, 0x5b, 0xab, 0xab, | 
|  | 0x00, 0x00, 0xf0, 0xf8 | 
|  | }; | 
|  |  | 
|  | while (retry--) { | 
|  |  | 
|  | /* Enable VGA */ | 
|  | ret = GETREG(SISVGAEN, &tmp8); | 
|  | ret |= SETREG(SISVGAEN, (tmp8 | 0x01)); | 
|  |  | 
|  | /* Enable GPU access to VRAM */ | 
|  | ret |= GETREG(SISMISCR, &tmp8); | 
|  | ret |= SETREG(SISMISCW, (tmp8 | 0x01)); | 
|  |  | 
|  | if (ret) continue; | 
|  |  | 
|  | /* Reset registers */ | 
|  | ret |= SETIREGAND(SISCR, 0x5b, 0xdf); | 
|  | ret |= SETIREG(SISSR, 0x05, 0x86); | 
|  | ret |= SETIREGOR(SISSR, 0x20, 0x01); | 
|  |  | 
|  | ret |= SETREG(SISMISCW, 0x67); | 
|  |  | 
|  | for (i = 0x06; i <= 0x1f; i++) { | 
|  | ret |= SETIREG(SISSR, i, 0x00); | 
|  | } | 
|  | for (i = 0x21; i <= 0x27; i++) { | 
|  | ret |= SETIREG(SISSR, i, 0x00); | 
|  | } | 
|  | for (i = 0x31; i <= 0x3d; i++) { | 
|  | ret |= SETIREG(SISSR, i, 0x00); | 
|  | } | 
|  | for (i = 0x12; i <= 0x1b; i++) { | 
|  | ret |= SETIREG(SISSR, i, 0x00); | 
|  | } | 
|  | for (i = 0x79; i <= 0x7c; i++) { | 
|  | ret |= SETIREG(SISCR, i, 0x00); | 
|  | } | 
|  |  | 
|  | if (ret) continue; | 
|  |  | 
|  | ret |= SETIREG(SISCR, 0x63, 0x80); | 
|  |  | 
|  | ret |= GETIREG(SISSR, 0x3a, &ramtype); | 
|  | ramtype &= 0x03; | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x28, mclktable[ramtype * 4]); | 
|  | ret |= SETIREG(SISSR, 0x29, mclktable[(ramtype * 4) + 1]); | 
|  | ret |= SETIREG(SISSR, 0x2a, mclktable[(ramtype * 4) + 2]); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x2e, eclktable[ramtype * 4]); | 
|  | ret |= SETIREG(SISSR, 0x2f, eclktable[(ramtype * 4) + 1]); | 
|  | ret |= SETIREG(SISSR, 0x30, eclktable[(ramtype * 4) + 2]); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x07, 0x18); | 
|  | ret |= SETIREG(SISSR, 0x11, 0x0f); | 
|  |  | 
|  | if (ret) continue; | 
|  |  | 
|  | for (i = 0x15, j = 0; i <= 0x1b; i++, j++) { | 
|  | ret |= SETIREG(SISSR, i, ramtypetable1[(j*4) + ramtype]); | 
|  | } | 
|  | for (i = 0x40, j = 0; i <= 0x44; i++, j++) { | 
|  | ret |= SETIREG(SISCR, i, ramtypetable2[(j*4) + ramtype]); | 
|  | } | 
|  |  | 
|  | ret |= SETIREG(SISCR, 0x49, 0xaa); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x1f, 0x00); | 
|  | ret |= SETIREG(SISSR, 0x20, 0xa0); | 
|  | ret |= SETIREG(SISSR, 0x23, 0xf6); | 
|  | ret |= SETIREG(SISSR, 0x24, 0x0d); | 
|  | ret |= SETIREG(SISSR, 0x25, 0x33); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x11, 0x0f); | 
|  |  | 
|  | ret |= SETIREGOR(SISPART1, 0x2f, 0x01); | 
|  |  | 
|  | ret |= SETIREGAND(SISCAP, 0x3f, 0xef); | 
|  |  | 
|  | if (ret) continue; | 
|  |  | 
|  | ret |= SETIREG(SISPART1, 0x00, 0x00); | 
|  |  | 
|  | ret |= GETIREG(SISSR, 0x13, &tmp8); | 
|  | tmp8 >>= 4; | 
|  |  | 
|  | ret |= SETIREG(SISPART1, 0x02, 0x00); | 
|  | ret |= SETIREG(SISPART1, 0x2e, 0x08); | 
|  |  | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x50, &tmp32); | 
|  | tmp32 &= 0x00f00000; | 
|  | tmp8 = (tmp32 == 0x100000) ? 0x33 : 0x03; | 
|  | ret |= SETIREG(SISSR, 0x25, tmp8); | 
|  | tmp8 = (tmp32 == 0x100000) ? 0xaa : 0x88; | 
|  | ret |= SETIREG(SISCR, 0x49, tmp8); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x27, 0x1f); | 
|  | ret |= SETIREG(SISSR, 0x31, 0x00); | 
|  | ret |= SETIREG(SISSR, 0x32, 0x11); | 
|  | ret |= SETIREG(SISSR, 0x33, 0x00); | 
|  |  | 
|  | if (ret) continue; | 
|  |  | 
|  | ret |= SETIREG(SISCR, 0x83, 0x00); | 
|  |  | 
|  | ret |= sisusb_set_default_mode(sisusb, 0); | 
|  |  | 
|  | ret |= SETIREGAND(SISSR, 0x21, 0xdf); | 
|  | ret |= SETIREGOR(SISSR, 0x01, 0x20); | 
|  | ret |= SETIREGOR(SISSR, 0x16, 0x0f); | 
|  |  | 
|  | ret |= sisusb_triggersr16(sisusb, ramtype); | 
|  |  | 
|  | /* Disable refresh */ | 
|  | ret |= SETIREGAND(SISSR, 0x17, 0xf8); | 
|  | ret |= SETIREGOR(SISSR, 0x19, 0x03); | 
|  |  | 
|  | ret |= sisusb_getbuswidth(sisusb, &bw, &chab); | 
|  | ret |= sisusb_verify_mclk(sisusb); | 
|  |  | 
|  | if (ramtype <= 1) { | 
|  | ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab); | 
|  | if (iret) { | 
|  | printk(KERN_ERR "sisusbvga[%d]: RAM size " | 
|  | "detection failed, " | 
|  | "assuming 8MB video RAM\n", | 
|  | sisusb->minor); | 
|  | ret |= SETIREG(SISSR,0x14,0x31); | 
|  | /* TODO */ | 
|  | } | 
|  | } else { | 
|  | printk(KERN_ERR "sisusbvga[%d]: DDR RAM device found, " | 
|  | "assuming 8MB video RAM\n", | 
|  | sisusb->minor); | 
|  | ret |= SETIREG(SISSR,0x14,0x31); | 
|  | /* *** TODO *** */ | 
|  | } | 
|  |  | 
|  | /* Enable refresh */ | 
|  | ret |= SETIREG(SISSR, 0x16, ramtypetable1[4 + ramtype]); | 
|  | ret |= SETIREG(SISSR, 0x17, ramtypetable1[8 + ramtype]); | 
|  | ret |= SETIREG(SISSR, 0x19, ramtypetable1[16 + ramtype]); | 
|  |  | 
|  | ret |= SETIREGOR(SISSR, 0x21, 0x20); | 
|  |  | 
|  | ret |= SETIREG(SISSR, 0x22, 0xfb); | 
|  | ret |= SETIREG(SISSR, 0x21, 0xa5); | 
|  |  | 
|  | if (ret == 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #undef SETREG | 
|  | #undef GETREG | 
|  | #undef SETIREG | 
|  | #undef GETIREG | 
|  | #undef SETIREGOR | 
|  | #undef SETIREGAND | 
|  | #undef SETIREGANDOR | 
|  | #undef READL | 
|  | #undef WRITEL | 
|  |  | 
|  | static void | 
|  | sisusb_get_ramconfig(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | u8 tmp8, tmp82, ramtype; | 
|  | int bw = 0; | 
|  | char *ramtypetext1 = NULL; | 
|  | const char *ramtypetext2[] = {	"SDR SDRAM", "SDR SGRAM", | 
|  | "DDR SDRAM", "DDR SGRAM" }; | 
|  | static const int busSDR[4]  = {64, 64, 128, 128}; | 
|  | static const int busDDR[4]  = {32, 32,  64,  64}; | 
|  | static const int busDDRA[4] = {64+32, 64+32 , (64+32)*2, (64+32)*2}; | 
|  |  | 
|  | sisusb_getidxreg(sisusb, SISSR, 0x14, &tmp8); | 
|  | sisusb_getidxreg(sisusb, SISSR, 0x15, &tmp82); | 
|  | sisusb_getidxreg(sisusb, SISSR, 0x3a, &ramtype); | 
|  | sisusb->vramsize = (1 << ((tmp8 & 0xf0) >> 4)) * 1024 * 1024; | 
|  | ramtype &= 0x03; | 
|  | switch ((tmp8 >> 2) & 0x03) { | 
|  | case 0: ramtypetext1 = "1 ch/1 r"; | 
|  | if (tmp82 & 0x10) { | 
|  | bw = 32; | 
|  | } else { | 
|  | bw = busSDR[(tmp8 & 0x03)]; | 
|  | } | 
|  | break; | 
|  | case 1: ramtypetext1 = "1 ch/2 r"; | 
|  | sisusb->vramsize <<= 1; | 
|  | bw = busSDR[(tmp8 & 0x03)]; | 
|  | break; | 
|  | case 2: ramtypetext1 = "asymmeric"; | 
|  | sisusb->vramsize += sisusb->vramsize/2; | 
|  | bw = busDDRA[(tmp8 & 0x03)]; | 
|  | break; | 
|  | case 3: ramtypetext1 = "2 channel"; | 
|  | sisusb->vramsize <<= 1; | 
|  | bw = busDDR[(tmp8 & 0x03)]; | 
|  | break; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "sisusbvga[%d]: %dMB %s %s, bus width %d\n", | 
|  | sisusb->minor, (sisusb->vramsize >> 20), ramtypetext1, | 
|  | ramtypetext2[ramtype], bw); | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_do_init_gfxdevice(struct sisusb_usb_data *sisusb) | 
|  | { | 
|  | struct sisusb_packet packet; | 
|  | int ret; | 
|  | u32 tmp32; | 
|  |  | 
|  | /* Do some magic */ | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000324; | 
|  | packet.data    = 0x00000004; | 
|  | ret = sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  |  | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000364; | 
|  | packet.data    = 0x00000004; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  |  | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000384; | 
|  | packet.data    = 0x00000004; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  |  | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000100; | 
|  | packet.data    = 0x00000700; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  |  | 
|  | packet.header  = 0x000f; | 
|  | packet.address = 0x00000004; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 6, &packet, 0); | 
|  | packet.data |= 0x17; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  |  | 
|  | /* Init BAR 0 (VRAM) */ | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32); | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x10, 0xfffffff0); | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32); | 
|  | tmp32 &= 0x0f; | 
|  | tmp32 |= SISUSB_PCI_MEMBASE; | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x10, tmp32); | 
|  |  | 
|  | /* Init BAR 1 (MMIO) */ | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32); | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x14, 0xfffffff0); | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32); | 
|  | tmp32 &= 0x0f; | 
|  | tmp32 |= SISUSB_PCI_MMIOBASE; | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x14, tmp32); | 
|  |  | 
|  | /* Init BAR 2 (i/o ports) */ | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32); | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x18, 0xfffffff0); | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32); | 
|  | tmp32 &= 0x0f; | 
|  | tmp32 |= SISUSB_PCI_IOPORTBASE; | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x18, tmp32); | 
|  |  | 
|  | /* Enable memory and i/o access */ | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x04, &tmp32); | 
|  | tmp32 |= 0x3; | 
|  | ret |= sisusb_write_pci_config(sisusb, 0x04, tmp32); | 
|  |  | 
|  | if (ret == 0) { | 
|  | /* Some further magic */ | 
|  | packet.header  = 0x001f; | 
|  | packet.address = 0x00000050; | 
|  | packet.data    = 0x000000ff; | 
|  | ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Initialize the graphics device (return 0 on success) | 
|  | * This initializes the net2280 as well as the PCI registers | 
|  | * of the graphics board. | 
|  | */ | 
|  |  | 
|  | static int | 
|  | sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen) | 
|  | { | 
|  | int ret = 0, test = 0; | 
|  | u32 tmp32; | 
|  |  | 
|  | if (sisusb->devinit == 1) { | 
|  | /* Read PCI BARs and see if they have been set up */ | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32); | 
|  | if (ret) return ret; | 
|  | if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MEMBASE) test++; | 
|  |  | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32); | 
|  | if (ret) return ret; | 
|  | if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MMIOBASE) test++; | 
|  |  | 
|  | ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32); | 
|  | if (ret) return ret; | 
|  | if ((tmp32 & 0xfffffff0) == SISUSB_PCI_IOPORTBASE) test++; | 
|  | } | 
|  |  | 
|  | /* No? So reset the device */ | 
|  | if ((sisusb->devinit == 0) || (test != 3)) { | 
|  |  | 
|  | ret |= sisusb_do_init_gfxdevice(sisusb); | 
|  |  | 
|  | if (ret == 0) | 
|  | sisusb->devinit = 1; | 
|  |  | 
|  | } | 
|  |  | 
|  | if (sisusb->devinit) { | 
|  | /* Initialize the graphics core */ | 
|  | if (sisusb_init_gfxcore(sisusb) == 0) { | 
|  | sisusb->gfxinit = 1; | 
|  | sisusb_get_ramconfig(sisusb); | 
|  | ret |= sisusb_set_default_mode(sisusb, 1); | 
|  | ret |= sisusb_setup_screen(sisusb, 1, initscreen); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  |  | 
|  | /* Set up default text mode: | 
|  | - Set text mode (0x03) | 
|  | - Upload default font | 
|  | - Upload user font (if available) | 
|  | */ | 
|  |  | 
|  | int | 
|  | sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) | 
|  | { | 
|  | int ret = 0, slot = sisusb->font_slot, i; | 
|  | const struct font_desc *myfont; | 
|  | u8 *tempbuf; | 
|  | u16 *tempbufb; | 
|  | size_t written; | 
|  | static const char bootstring[] = "SiSUSB VGA text console, (C) 2005 Thomas Winischhofer."; | 
|  | static const char bootlogo[] = "(o_ //\\ V_/_"; | 
|  |  | 
|  | /* sisusb->lock is down */ | 
|  |  | 
|  | if (!sisusb->SiS_Pr) | 
|  | return 1; | 
|  |  | 
|  | sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; | 
|  | sisusb->SiS_Pr->sisusb = (void *)sisusb; | 
|  |  | 
|  | /* Set mode 0x03 */ | 
|  | SiSUSBSetMode(sisusb->SiS_Pr, 0x03); | 
|  |  | 
|  | if (!(myfont = find_font("VGA8x16"))) | 
|  | return 1; | 
|  |  | 
|  | if (!(tempbuf = vmalloc(8192))) | 
|  | return 1; | 
|  |  | 
|  | for (i = 0; i < 256; i++) | 
|  | memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16); | 
|  |  | 
|  | /* Upload default font */ | 
|  | ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192, 0, 1, NULL, 16, 0); | 
|  |  | 
|  | vfree(tempbuf); | 
|  |  | 
|  | /* Upload user font (and reset current slot) */ | 
|  | if (sisusb->font_backup) { | 
|  | ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup, | 
|  | 8192, sisusb->font_backup_512, 1, NULL, | 
|  | sisusb->font_backup_height, 0); | 
|  | if (slot != 2) | 
|  | sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1, | 
|  | NULL, 16, 0); | 
|  | } | 
|  |  | 
|  | if (init && !sisusb->scrbuf) { | 
|  |  | 
|  | if ((tempbuf = vmalloc(8192))) { | 
|  |  | 
|  | i = 4096; | 
|  | tempbufb = (u16 *)tempbuf; | 
|  | while (i--) | 
|  | *(tempbufb++) = 0x0720; | 
|  |  | 
|  | i = 0; | 
|  | tempbufb = (u16 *)tempbuf; | 
|  | while (bootlogo[i]) { | 
|  | *(tempbufb++) = 0x0700 | bootlogo[i++]; | 
|  | if (!(i % 4)) | 
|  | tempbufb += 76; | 
|  | } | 
|  |  | 
|  | i = 0; | 
|  | tempbufb = (u16 *)tempbuf + 6; | 
|  | while (bootstring[i]) | 
|  | *(tempbufb++) = 0x0700 | bootstring[i++]; | 
|  |  | 
|  | ret |= sisusb_copy_memory(sisusb, tempbuf, | 
|  | sisusb->vrambase, 8192, &written); | 
|  |  | 
|  | vfree(tempbuf); | 
|  |  | 
|  | } | 
|  |  | 
|  | } else if (sisusb->scrbuf) { | 
|  |  | 
|  | ret |= sisusb_copy_memory(sisusb, (char *)sisusb->scrbuf, | 
|  | sisusb->vrambase, sisusb->scrbuf_size, &written); | 
|  |  | 
|  | } | 
|  |  | 
|  | if (sisusb->sisusb_cursor_size_from >= 0 && | 
|  | sisusb->sisusb_cursor_size_to >= 0) { | 
|  | sisusb_setidxreg(sisusb, SISCR, 0x0a, | 
|  | sisusb->sisusb_cursor_size_from); | 
|  | sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, | 
|  | sisusb->sisusb_cursor_size_to); | 
|  | } else { | 
|  | sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d); | 
|  | sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e); | 
|  | sisusb->sisusb_cursor_size_to = -1; | 
|  | } | 
|  |  | 
|  | slot = sisusb->sisusb_cursor_loc; | 
|  | if(slot < 0) slot = 0; | 
|  |  | 
|  | sisusb->sisusb_cursor_loc = -1; | 
|  | sisusb->bad_cursor_pos = 1; | 
|  |  | 
|  | sisusb_set_cursor(sisusb, slot); | 
|  |  | 
|  | sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); | 
|  | sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); | 
|  |  | 
|  | sisusb->textmodedestroyed = 0; | 
|  |  | 
|  | /* sisusb->lock is down */ | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* fops */ | 
|  |  | 
|  | static int | 
|  | sisusb_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | struct usb_interface *interface; | 
|  | int subminor = iminor(inode); | 
|  |  | 
|  | mutex_lock(&disconnect_mutex); | 
|  |  | 
|  | if (!(interface = usb_find_interface(&sisusb_driver, subminor))) { | 
|  | printk(KERN_ERR "sisusb[%d]: Failed to find interface\n", | 
|  | subminor); | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!(sisusb = usb_get_intfdata(interface))) { | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | if (!sisusb->present || !sisusb->ready) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (sisusb->isopen) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | if (!sisusb->devinit) { | 
|  | if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) { | 
|  | if (sisusb_init_gfxdevice(sisusb, 0)) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Failed to initialize " | 
|  | "device\n", | 
|  | sisusb->minor); | 
|  | return -EIO; | 
|  | } | 
|  | } else { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Device not attached to " | 
|  | "USB 2.0 hub\n", | 
|  | sisusb->minor); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Increment usage count for our sisusb */ | 
|  | kref_get(&sisusb->kref); | 
|  |  | 
|  | sisusb->isopen = 1; | 
|  |  | 
|  | file->private_data = sisusb; | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  |  | 
|  | mutex_unlock(&disconnect_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void | 
|  | sisusb_delete(struct kref *kref) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb = to_sisusb_dev(kref); | 
|  |  | 
|  | if (!sisusb) | 
|  | return; | 
|  |  | 
|  | if (sisusb->sisusb_dev) | 
|  | usb_put_dev(sisusb->sisusb_dev); | 
|  |  | 
|  | sisusb->sisusb_dev = NULL; | 
|  | sisusb_free_buffers(sisusb); | 
|  | sisusb_free_urbs(sisusb); | 
|  | #ifdef INCL_SISUSB_CON | 
|  | kfree(sisusb->SiS_Pr); | 
|  | #endif | 
|  | kfree(sisusb); | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | int myminor; | 
|  |  | 
|  | mutex_lock(&disconnect_mutex); | 
|  |  | 
|  | if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) { | 
|  | mutex_unlock(&disconnect_mutex); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | if (sisusb->present) { | 
|  | /* Wait for all URBs to finish if device still present */ | 
|  | if (!sisusb_wait_all_out_complete(sisusb)) | 
|  | sisusb_kill_all_busy(sisusb); | 
|  | } | 
|  |  | 
|  | myminor = sisusb->minor; | 
|  |  | 
|  | sisusb->isopen = 0; | 
|  | file->private_data = NULL; | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  |  | 
|  | /* decrement the usage count on our device */ | 
|  | kref_put(&sisusb->kref, sisusb_delete); | 
|  |  | 
|  | mutex_unlock(&disconnect_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | ssize_t bytes_read = 0; | 
|  | int errno = 0; | 
|  | u8 buf8; | 
|  | u16 buf16; | 
|  | u32 buf32, address; | 
|  |  | 
|  | if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_IOPORTBASE + 128) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_IOPORTBASE + | 
|  | SISUSB_PCI_IOPORTBASE; | 
|  |  | 
|  | /* Read i/o ports | 
|  | * Byte, word and long(32) can be read. As this | 
|  | * emulates inX instructions, the data returned is | 
|  | * in machine-endianness. | 
|  | */ | 
|  | switch (count) { | 
|  |  | 
|  | case 1: | 
|  | if (sisusb_read_memio_byte(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, &buf8)) | 
|  | errno = -EIO; | 
|  | else if (put_user(buf8, (u8 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else | 
|  | bytes_read = 1; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | if (sisusb_read_memio_word(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, &buf16)) | 
|  | errno = -EIO; | 
|  | else if (put_user(buf16, (u16 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else | 
|  | bytes_read = 2; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case 4: | 
|  | if (sisusb_read_memio_long(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, &buf32)) | 
|  | errno = -EIO; | 
|  | else if (put_user(buf32, (u32 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else | 
|  | bytes_read = 4; | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | errno = -EIO; | 
|  |  | 
|  | } | 
|  |  | 
|  | } else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_MEMBASE + | 
|  | SISUSB_PCI_MEMBASE; | 
|  |  | 
|  | /* Read video ram | 
|  | * Remember: Data delivered is never endian-corrected | 
|  | */ | 
|  | errno = sisusb_read_mem_bulk(sisusb, address, | 
|  | NULL, count, buffer, &bytes_read); | 
|  |  | 
|  | if (bytes_read) | 
|  | errno = bytes_read; | 
|  |  | 
|  | } else  if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_MMIOBASE + SISUSB_PCI_MMIOSIZE) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_MMIOBASE + | 
|  | SISUSB_PCI_MMIOBASE; | 
|  |  | 
|  | /* Read MMIO | 
|  | * Remember: Data delivered is never endian-corrected | 
|  | */ | 
|  | errno = sisusb_read_mem_bulk(sisusb, address, | 
|  | NULL, count, buffer, &bytes_read); | 
|  |  | 
|  | if (bytes_read) | 
|  | errno = bytes_read; | 
|  |  | 
|  | } else  if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE && | 
|  | (*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + 0x5c) { | 
|  |  | 
|  | if (count != 4) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE; | 
|  |  | 
|  | /* Read PCI config register | 
|  | * Return value delivered in machine endianness. | 
|  | */ | 
|  | if (sisusb_read_pci_config(sisusb, address, &buf32)) | 
|  | errno = -EIO; | 
|  | else if (put_user(buf32, (u32 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else | 
|  | bytes_read = 4; | 
|  |  | 
|  | } else { | 
|  |  | 
|  | errno = -EBADFD; | 
|  |  | 
|  | } | 
|  |  | 
|  | (*ppos) += bytes_read; | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  |  | 
|  | return errno ? errno : bytes_read; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | sisusb_write(struct file *file, const char __user *buffer, size_t count, | 
|  | loff_t *ppos) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | int errno = 0; | 
|  | ssize_t bytes_written = 0; | 
|  | u8 buf8; | 
|  | u16 buf16; | 
|  | u32 buf32, address; | 
|  |  | 
|  | if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_IOPORTBASE + 128) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_IOPORTBASE + | 
|  | SISUSB_PCI_IOPORTBASE; | 
|  |  | 
|  | /* Write i/o ports | 
|  | * Byte, word and long(32) can be written. As this | 
|  | * emulates outX instructions, the data is expected | 
|  | * in machine-endianness. | 
|  | */ | 
|  | switch (count) { | 
|  |  | 
|  | case 1: | 
|  | if (get_user(buf8, (u8 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else if (sisusb_write_memio_byte(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, buf8)) | 
|  | errno = -EIO; | 
|  | else | 
|  | bytes_written = 1; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | if (get_user(buf16, (u16 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else if (sisusb_write_memio_word(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, buf16)) | 
|  | errno = -EIO; | 
|  | else | 
|  | bytes_written = 2; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case 4: | 
|  | if (get_user(buf32, (u32 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else if (sisusb_write_memio_long(sisusb, | 
|  | SISUSB_TYPE_IO, | 
|  | address, buf32)) | 
|  | errno = -EIO; | 
|  | else | 
|  | bytes_written = 4; | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | errno = -EIO; | 
|  | } | 
|  |  | 
|  | } else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_MEMBASE + | 
|  | SISUSB_PCI_MEMBASE; | 
|  |  | 
|  | /* Write video ram. | 
|  | * Buffer is copied 1:1, therefore, on big-endian | 
|  | * machines, the data must be swapped by userland | 
|  | * in advance (if applicable; no swapping in 8bpp | 
|  | * mode or if YUV data is being transferred). | 
|  | */ | 
|  | errno = sisusb_write_mem_bulk(sisusb, address, NULL, | 
|  | count, buffer, 0, &bytes_written); | 
|  |  | 
|  | if (bytes_written) | 
|  | errno = bytes_written; | 
|  |  | 
|  | } else  if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE && | 
|  | (*ppos) <  SISUSB_PCI_PSEUDO_MMIOBASE + SISUSB_PCI_MMIOSIZE) { | 
|  |  | 
|  | address = (*ppos) - | 
|  | SISUSB_PCI_PSEUDO_MMIOBASE + | 
|  | SISUSB_PCI_MMIOBASE; | 
|  |  | 
|  | /* Write MMIO. | 
|  | * Buffer is copied 1:1, therefore, on big-endian | 
|  | * machines, the data must be swapped by userland | 
|  | * in advance. | 
|  | */ | 
|  | errno = sisusb_write_mem_bulk(sisusb, address, NULL, | 
|  | count, buffer, 0, &bytes_written); | 
|  |  | 
|  | if (bytes_written) | 
|  | errno = bytes_written; | 
|  |  | 
|  | } else  if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE && | 
|  | (*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + SISUSB_PCI_PCONFSIZE) { | 
|  |  | 
|  | if (count != 4) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE; | 
|  |  | 
|  | /* Write PCI config register. | 
|  | * Given value expected in machine endianness. | 
|  | */ | 
|  | if (get_user(buf32, (u32 __user *)buffer)) | 
|  | errno = -EFAULT; | 
|  | else if (sisusb_write_pci_config(sisusb, address, buf32)) | 
|  | errno = -EIO; | 
|  | else | 
|  | bytes_written = 4; | 
|  |  | 
|  |  | 
|  | } else { | 
|  |  | 
|  | /* Error */ | 
|  | errno = -EBADFD; | 
|  |  | 
|  | } | 
|  |  | 
|  | (*ppos) += bytes_written; | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  |  | 
|  | return errno ? errno : bytes_written; | 
|  | } | 
|  |  | 
|  | static loff_t | 
|  | sisusb_lseek(struct file *file, loff_t offset, int orig) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | loff_t ret; | 
|  |  | 
|  | if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) { | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | switch (orig) { | 
|  | case 0: | 
|  | file->f_pos = offset; | 
|  | ret = file->f_pos; | 
|  | /* never negative, no force_successful_syscall needed */ | 
|  | break; | 
|  | case 1: | 
|  | file->f_pos += offset; | 
|  | ret = file->f_pos; | 
|  | /* never negative, no force_successful_syscall needed */ | 
|  | break; | 
|  | default: | 
|  | /* seeking relative to "end of file" is not supported */ | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y, | 
|  | unsigned long arg) | 
|  | { | 
|  | int 	retval, port, length; | 
|  | u32	address; | 
|  |  | 
|  | /* All our commands require the device | 
|  | * to be initialized. | 
|  | */ | 
|  | if (!sisusb->devinit) | 
|  | return -ENODEV; | 
|  |  | 
|  | port = y->data3 - | 
|  | SISUSB_PCI_PSEUDO_IOPORTBASE + | 
|  | SISUSB_PCI_IOPORTBASE; | 
|  |  | 
|  | switch (y->operation) { | 
|  | case SUCMD_GET: | 
|  | retval = sisusb_getidxreg(sisusb, port, | 
|  | y->data0, &y->data1); | 
|  | if (!retval) { | 
|  | if (copy_to_user((void __user *)arg, y, | 
|  | sizeof(*y))) | 
|  | retval = -EFAULT; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case SUCMD_SET: | 
|  | retval = sisusb_setidxreg(sisusb, port, | 
|  | y->data0, y->data1); | 
|  | break; | 
|  |  | 
|  | case SUCMD_SETOR: | 
|  | retval = sisusb_setidxregor(sisusb, port, | 
|  | y->data0, y->data1); | 
|  | break; | 
|  |  | 
|  | case SUCMD_SETAND: | 
|  | retval = sisusb_setidxregand(sisusb, port, | 
|  | y->data0, y->data1); | 
|  | break; | 
|  |  | 
|  | case SUCMD_SETANDOR: | 
|  | retval = sisusb_setidxregandor(sisusb, port, | 
|  | y->data0, y->data1, y->data2); | 
|  | break; | 
|  |  | 
|  | case SUCMD_SETMASK: | 
|  | retval = sisusb_setidxregmask(sisusb, port, | 
|  | y->data0, y->data1, y->data2); | 
|  | break; | 
|  |  | 
|  | case SUCMD_CLRSCR: | 
|  | /* Gfx core must be initialized */ | 
|  | if (!sisusb->gfxinit) | 
|  | return -ENODEV; | 
|  |  | 
|  | length = (y->data0 << 16) | (y->data1 << 8) | y->data2; | 
|  | address = y->data3 - | 
|  | SISUSB_PCI_PSEUDO_MEMBASE + | 
|  | SISUSB_PCI_MEMBASE; | 
|  | retval = sisusb_clear_vram(sisusb, address, length); | 
|  | break; | 
|  |  | 
|  | case SUCMD_HANDLETEXTMODE: | 
|  | retval = 0; | 
|  | #ifdef INCL_SISUSB_CON | 
|  | /* Gfx core must be initialized, SiS_Pr must exist */ | 
|  | if (!sisusb->gfxinit || !sisusb->SiS_Pr) | 
|  | return -ENODEV; | 
|  |  | 
|  | switch (y->data0) { | 
|  | case 0: | 
|  | retval = sisusb_reset_text_mode(sisusb, 0); | 
|  | break; | 
|  | case 1: | 
|  | sisusb->textmodedestroyed = 1; | 
|  | break; | 
|  | } | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | case SUCMD_SETMODE: | 
|  | /* Gfx core must be initialized, SiS_Pr must exist */ | 
|  | if (!sisusb->gfxinit || !sisusb->SiS_Pr) | 
|  | return -ENODEV; | 
|  |  | 
|  | retval = 0; | 
|  |  | 
|  | sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; | 
|  | sisusb->SiS_Pr->sisusb = (void *)sisusb; | 
|  |  | 
|  | if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3)) | 
|  | retval = -EINVAL; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case SUCMD_SETVESAMODE: | 
|  | /* Gfx core must be initialized, SiS_Pr must exist */ | 
|  | if (!sisusb->gfxinit || !sisusb->SiS_Pr) | 
|  | return -ENODEV; | 
|  |  | 
|  | retval = 0; | 
|  |  | 
|  | sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; | 
|  | sisusb->SiS_Pr->sisusb = (void *)sisusb; | 
|  |  | 
|  | if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3)) | 
|  | retval = -EINVAL; | 
|  |  | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | default: | 
|  | retval = -EINVAL; | 
|  | } | 
|  |  | 
|  | if (retval > 0) | 
|  | retval = -EIO; | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int | 
|  | sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | struct sisusb_info x; | 
|  | struct sisusb_command y; | 
|  | int 	retval = 0; | 
|  | u32 __user *argp = (u32 __user *)arg; | 
|  |  | 
|  | if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) { | 
|  | retval = -ENODEV; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | switch (cmd) { | 
|  |  | 
|  | case SISUSB_GET_CONFIG_SIZE: | 
|  |  | 
|  | if (put_user(sizeof(x), argp)) | 
|  | retval = -EFAULT; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case SISUSB_GET_CONFIG: | 
|  |  | 
|  | x.sisusb_id   	    = SISUSB_ID; | 
|  | x.sisusb_version    = SISUSB_VERSION; | 
|  | x.sisusb_revision   = SISUSB_REVISION; | 
|  | x.sisusb_patchlevel = SISUSB_PATCHLEVEL; | 
|  | x.sisusb_gfxinit    = sisusb->gfxinit; | 
|  | x.sisusb_vrambase   = SISUSB_PCI_PSEUDO_MEMBASE; | 
|  | x.sisusb_mmiobase   = SISUSB_PCI_PSEUDO_MMIOBASE; | 
|  | x.sisusb_iobase     = SISUSB_PCI_PSEUDO_IOPORTBASE; | 
|  | x.sisusb_pcibase    = SISUSB_PCI_PSEUDO_PCIBASE; | 
|  | x.sisusb_vramsize   = sisusb->vramsize; | 
|  | x.sisusb_minor	    = sisusb->minor; | 
|  | x.sisusb_fbdevactive= 0; | 
|  | #ifdef INCL_SISUSB_CON | 
|  | x.sisusb_conactive  = sisusb->haveconsole ? 1 : 0; | 
|  | #else | 
|  | x.sisusb_conactive  = 0; | 
|  | #endif | 
|  |  | 
|  | if (copy_to_user((void __user *)arg, &x, sizeof(x))) | 
|  | retval = -EFAULT; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case SISUSB_COMMAND: | 
|  |  | 
|  | if (copy_from_user(&y, (void __user *)arg, sizeof(y))) | 
|  | retval = -EFAULT; | 
|  | else | 
|  | retval = sisusb_handle_command(sisusb, &y, arg); | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | retval = -ENOTTY; | 
|  | break; | 
|  | } | 
|  |  | 
|  | err_out: | 
|  | mutex_unlock(&sisusb->lock); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | #ifdef SISUSB_NEW_CONFIG_COMPAT | 
|  | static long | 
|  | sisusb_compat_ioctl(struct file *f, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | long retval; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SISUSB_GET_CONFIG_SIZE: | 
|  | case SISUSB_GET_CONFIG: | 
|  | case SISUSB_COMMAND: | 
|  | lock_kernel(); | 
|  | retval = sisusb_ioctl(f->f_path.dentry->d_inode, f, cmd, arg); | 
|  | unlock_kernel(); | 
|  | return retval; | 
|  |  | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static const struct file_operations usb_sisusb_fops = { | 
|  | .owner =	THIS_MODULE, | 
|  | .open =		sisusb_open, | 
|  | .release =	sisusb_release, | 
|  | .read =		sisusb_read, | 
|  | .write =	sisusb_write, | 
|  | .llseek = 	sisusb_lseek, | 
|  | #ifdef SISUSB_NEW_CONFIG_COMPAT | 
|  | .compat_ioctl = sisusb_compat_ioctl, | 
|  | #endif | 
|  | .ioctl =	sisusb_ioctl | 
|  | }; | 
|  |  | 
|  | static struct usb_class_driver usb_sisusb_class = { | 
|  | .name =		"sisusbvga%d", | 
|  | .fops =		&usb_sisusb_fops, | 
|  | .minor_base =	SISUSB_MINOR | 
|  | }; | 
|  |  | 
|  | static int sisusb_probe(struct usb_interface *intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct sisusb_usb_data *sisusb; | 
|  | int retval = 0, i; | 
|  | const char *memfail = | 
|  | KERN_ERR | 
|  | "sisusbvga[%d]: Failed to allocate memory for %s buffer\n"; | 
|  |  | 
|  | printk(KERN_INFO "sisusb: USB2VGA dongle found at address %d\n", | 
|  | dev->devnum); | 
|  |  | 
|  | /* Allocate memory for our private */ | 
|  | if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) { | 
|  | printk(KERN_ERR | 
|  | "sisusb: Failed to allocate memory for private data\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | kref_init(&sisusb->kref); | 
|  |  | 
|  | mutex_init(&(sisusb->lock)); | 
|  |  | 
|  | /* Register device */ | 
|  | if ((retval = usb_register_dev(intf, &usb_sisusb_class))) { | 
|  | printk(KERN_ERR | 
|  | "sisusb: Failed to get a minor for device %d\n", | 
|  | dev->devnum); | 
|  | retval = -ENODEV; | 
|  | goto error_1; | 
|  | } | 
|  |  | 
|  | sisusb->sisusb_dev = dev; | 
|  | sisusb->minor      = intf->minor; | 
|  | sisusb->vrambase   = SISUSB_PCI_MEMBASE; | 
|  | sisusb->mmiobase   = SISUSB_PCI_MMIOBASE; | 
|  | sisusb->mmiosize   = SISUSB_PCI_MMIOSIZE; | 
|  | sisusb->ioportbase = SISUSB_PCI_IOPORTBASE; | 
|  | /* Everything else is zero */ | 
|  |  | 
|  | /* Allocate buffers */ | 
|  | sisusb->ibufsize = SISUSB_IBUF_SIZE; | 
|  | if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE, | 
|  | GFP_KERNEL, &sisusb->transfer_dma_in))) { | 
|  | printk(memfail, "input", sisusb->minor); | 
|  | retval = -ENOMEM; | 
|  | goto error_2; | 
|  | } | 
|  |  | 
|  | sisusb->numobufs = 0; | 
|  | sisusb->obufsize = SISUSB_OBUF_SIZE; | 
|  | for (i = 0; i < NUMOBUFS; i++) { | 
|  | if (!(sisusb->obuf[i] = usb_buffer_alloc(dev, SISUSB_OBUF_SIZE, | 
|  | GFP_KERNEL, | 
|  | &sisusb->transfer_dma_out[i]))) { | 
|  | if (i == 0) { | 
|  | printk(memfail, "output", sisusb->minor); | 
|  | retval = -ENOMEM; | 
|  | goto error_3; | 
|  | } | 
|  | break; | 
|  | } else | 
|  | sisusb->numobufs++; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* Allocate URBs */ | 
|  | if (!(sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL))) { | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Failed to allocate URBs\n", | 
|  | sisusb->minor); | 
|  | retval = -ENOMEM; | 
|  | goto error_3; | 
|  | } | 
|  | sisusb->completein = 1; | 
|  |  | 
|  | for (i = 0; i < sisusb->numobufs; i++) { | 
|  | if (!(sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL))) { | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Failed to allocate URBs\n", | 
|  | sisusb->minor); | 
|  | retval = -ENOMEM; | 
|  | goto error_4; | 
|  | } | 
|  | sisusb->urbout_context[i].sisusb = (void *)sisusb; | 
|  | sisusb->urbout_context[i].urbindex = i; | 
|  | sisusb->urbstatus[i] = 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n", | 
|  | sisusb->minor, sisusb->numobufs); | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | /* Allocate our SiS_Pr */ | 
|  | if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) { | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Failed to allocate SiS_Pr\n", | 
|  | sisusb->minor); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* Do remaining init stuff */ | 
|  |  | 
|  | init_waitqueue_head(&sisusb->wait_q); | 
|  |  | 
|  | usb_set_intfdata(intf, sisusb); | 
|  |  | 
|  | usb_get_dev(sisusb->sisusb_dev); | 
|  |  | 
|  | sisusb->present = 1; | 
|  |  | 
|  | #ifdef SISUSB_OLD_CONFIG_COMPAT | 
|  | { | 
|  | int ret; | 
|  | /* Our ioctls are all "32/64bit compatible" */ | 
|  | ret =  register_ioctl32_conversion(SISUSB_GET_CONFIG_SIZE, NULL); | 
|  | ret |= register_ioctl32_conversion(SISUSB_GET_CONFIG,      NULL); | 
|  | ret |= register_ioctl32_conversion(SISUSB_COMMAND,         NULL); | 
|  | if (ret) | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Error registering ioctl32 " | 
|  | "translations\n", | 
|  | sisusb->minor); | 
|  | else | 
|  | sisusb->ioctl32registered = 1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (dev->speed == USB_SPEED_HIGH) { | 
|  | int initscreen = 1; | 
|  | #ifdef INCL_SISUSB_CON | 
|  | if (sisusb_first_vc > 0 && | 
|  | sisusb_last_vc > 0 && | 
|  | sisusb_first_vc <= sisusb_last_vc && | 
|  | sisusb_last_vc <= MAX_NR_CONSOLES) | 
|  | initscreen = 0; | 
|  | #endif | 
|  | if (sisusb_init_gfxdevice(sisusb, initscreen)) | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Failed to early " | 
|  | "initialize device\n", | 
|  | sisusb->minor); | 
|  |  | 
|  | } else | 
|  | printk(KERN_INFO | 
|  | "sisusbvga[%d]: Not attached to USB 2.0 hub, " | 
|  | "deferring init\n", | 
|  | sisusb->minor); | 
|  |  | 
|  | sisusb->ready = 1; | 
|  |  | 
|  | #ifdef SISUSBENDIANTEST | 
|  | printk(KERN_DEBUG "sisusb: *** RWTEST ***\n"); | 
|  | sisusb_testreadwrite(sisusb); | 
|  | printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n"); | 
|  | #endif | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_4: | 
|  | sisusb_free_urbs(sisusb); | 
|  | error_3: | 
|  | sisusb_free_buffers(sisusb); | 
|  | error_2: | 
|  | usb_deregister_dev(intf, &usb_sisusb_class); | 
|  | error_1: | 
|  | kfree(sisusb); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void sisusb_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct sisusb_usb_data *sisusb; | 
|  | int minor; | 
|  |  | 
|  | /* This should *not* happen */ | 
|  | if (!(sisusb = usb_get_intfdata(intf))) | 
|  | return; | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | sisusb_console_exit(sisusb); | 
|  | #endif | 
|  |  | 
|  | /* The above code doesn't need the disconnect | 
|  | * semaphore to be down; its meaning is to | 
|  | * protect all other routines from the disconnect | 
|  | * case, not the other way round. | 
|  | */ | 
|  | mutex_lock(&disconnect_mutex); | 
|  |  | 
|  | mutex_lock(&sisusb->lock); | 
|  |  | 
|  | /* Wait for all URBs to complete and kill them in case (MUST do) */ | 
|  | if (!sisusb_wait_all_out_complete(sisusb)) | 
|  | sisusb_kill_all_busy(sisusb); | 
|  |  | 
|  | minor = sisusb->minor; | 
|  |  | 
|  | usb_set_intfdata(intf, NULL); | 
|  |  | 
|  | usb_deregister_dev(intf, &usb_sisusb_class); | 
|  |  | 
|  | #ifdef SISUSB_OLD_CONFIG_COMPAT | 
|  | if (sisusb->ioctl32registered) { | 
|  | int ret; | 
|  | sisusb->ioctl32registered = 0; | 
|  | ret =  unregister_ioctl32_conversion(SISUSB_GET_CONFIG_SIZE); | 
|  | ret |= unregister_ioctl32_conversion(SISUSB_GET_CONFIG); | 
|  | ret |= unregister_ioctl32_conversion(SISUSB_COMMAND); | 
|  | if (ret) { | 
|  | printk(KERN_ERR | 
|  | "sisusbvga[%d]: Error unregistering " | 
|  | "ioctl32 translations\n", | 
|  | minor); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | sisusb->present = 0; | 
|  | sisusb->ready = 0; | 
|  |  | 
|  | mutex_unlock(&sisusb->lock); | 
|  |  | 
|  | /* decrement our usage count */ | 
|  | kref_put(&sisusb->kref, sisusb_delete); | 
|  |  | 
|  | mutex_unlock(&disconnect_mutex); | 
|  |  | 
|  | printk(KERN_INFO "sisusbvga[%d]: Disconnected\n", minor); | 
|  | } | 
|  |  | 
|  | static struct usb_device_id sisusb_table [] = { | 
|  | { USB_DEVICE(0x0711, 0x0900) }, | 
|  | { USB_DEVICE(0x0711, 0x0901) }, | 
|  | { USB_DEVICE(0x0711, 0x0902) }, | 
|  | { USB_DEVICE(0x182d, 0x021c) }, | 
|  | { USB_DEVICE(0x182d, 0x0269) }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE (usb, sisusb_table); | 
|  |  | 
|  | static struct usb_driver sisusb_driver = { | 
|  | .name =		"sisusb", | 
|  | .probe =	sisusb_probe, | 
|  | .disconnect =	sisusb_disconnect, | 
|  | .id_table =	sisusb_table, | 
|  | }; | 
|  |  | 
|  | static int __init usb_sisusb_init(void) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | #ifdef INCL_SISUSB_CON | 
|  | sisusb_init_concode(); | 
|  | #endif | 
|  |  | 
|  | if (!(retval = usb_register(&sisusb_driver))) { | 
|  |  | 
|  | printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n", | 
|  | SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL); | 
|  | printk(KERN_INFO | 
|  | "sisusb: Copyright (C) 2005 Thomas Winischhofer\n"); | 
|  |  | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void __exit usb_sisusb_exit(void) | 
|  | { | 
|  | usb_deregister(&sisusb_driver); | 
|  | } | 
|  |  | 
|  | module_init(usb_sisusb_init); | 
|  | module_exit(usb_sisusb_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>"); | 
|  | MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |