ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode
The "powered-down" cpuidle mode of Tegra20 needs the CPU0 be the last one
core to go into this mode before other core. The coupled cpuidle framework
can help to sync the MPCore to coupled state then go into "powered-down"
idle mode together. The driver can just assume the MPCore come into
"powered-down" mode at the same time. No need to take care if the CPU_0
goes into this mode along and only can put it into safe idle mode (WFI).
The powered-down state of Tegra20 requires power gating both CPU cores.
When the secondary CPU requests to enter powered-down state, it saves
its own contexts and then enters WFI for waiting CPU0 in the same state.
When the CPU0 requests powered-down state, it attempts to put the secondary
CPU into reset to prevent it from waking up. Then power down both CPUs
together and power off the cpu rail.
Be aware of that, you may see the legacy power state "LP2" in the code
which is exactly the same meaning of "CPU power down".
Based on the work by:
Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index addae35..364d845 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -34,6 +34,9 @@
#include "flowctrl.h"
#include "sleep.h"
+#define CLK_RESET_CCLK_BURST 0x20
+#define CLK_RESET_CCLK_DIVIDER 0x24
+
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
@@ -110,4 +113,20 @@
mov pc, r0
ENDPROC(tegra_shut_off_mmu)
.popsection
+
+/*
+ * tegra_switch_cpu_to_pllp
+ *
+ * In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp
+ */
+ENTRY(tegra_switch_cpu_to_pllp)
+ /* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */
+ mov32 r5, TEGRA_CLK_RESET_BASE
+ mov r0, #(2 << 28) @ burst policy = run mode
+ orr r0, r0, #(4 << 4) @ use PLLP in run mode burst
+ str r0, [r5, #CLK_RESET_CCLK_BURST]
+ mov r0, #0
+ str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+ mov pc, lr
+ENDPROC(tegra_switch_cpu_to_pllp)
#endif