| /* |
| * P1020si Device Tree Source |
| * |
| * Copyright 2011 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| / { |
| compatible = "fsl,P1020"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,P1020@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| PowerPC,P1020@1 { |
| device_type = "cpu"; |
| reg = <0x1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| localbus@ffe05000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0 0xffe05000 0 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| soc@ffe00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p1020-immr", "simple-bus"; |
| ranges = <0x0 0x0 0xffe00000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,p1020-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <16 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,p1020-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| spi@7000 { |
| cell-index = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,espi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <59 0x2>; |
| interrupt-parent = <&mpic>; |
| mode = "cpu"; |
| }; |
| |
| gpio: gpio-controller@f000 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x100>; |
| interrupts = <47 0x2>; |
| interrupt-parent = <&mpic>; |
| gpio-controller; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p1020-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x40000>; // L2,256K |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| mdio@24000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-mdio"; |
| reg = <0x24000 0x1000 0xb0030 0x4>; |
| |
| }; |
| |
| mdio@25000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-tbi"; |
| reg = <0x25000 0x1000 0xb1030 0x4>; |
| |
| }; |
| |
| enet0: ethernet@b0000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb0000 0x1000>; |
| interrupts = <29 2 30 2 34 2>; |
| }; |
| |
| queue-group@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb4000 0x1000>; |
| interrupts = <17 2 18 2 24 2>; |
| }; |
| }; |
| |
| enet1: ethernet@b1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb1000 0x1000>; |
| interrupts = <35 2 36 2 40 2>; |
| }; |
| |
| queue-group@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb5000 0x1000>; |
| interrupts = <51 2 52 2 67 2>; |
| }; |
| }; |
| |
| enet2: ethernet@b2000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb2000 0x1000>; |
| interrupts = <31 2 32 2 33 2>; |
| }; |
| |
| queue-group@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb6000 0x1000>; |
| interrupts = <25 2 26 2 27 2>; |
| }; |
| }; |
| |
| usb@22000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <28 0x2>; |
| }; |
| |
| /* USB2 is shared with localbus, so it must be disabled |
| by default. We can't put 'status = "disabled";' here |
| since U-Boot doesn't clear the status property when |
| it enables USB2. OTOH, U-Boot does create a new node |
| when there isn't any. So, just comment it out. |
| usb@23000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-usb2-dr"; |
| reg = <0x23000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <46 0x2>; |
| phy_type = "ulpi"; |
| }; |
| */ |
| |
| sdhci@2e000 { |
| compatible = "fsl,p1020-esdhc", "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x2>; |
| interrupt-parent = <&mpic>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", |
| "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 58 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0xbfe>; |
| fsl,descriptor-types-mask = <0x3ab0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,p1020-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,p1020-guts","fsl,p2020-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pcie@ffe09000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe09000 0 0x1000>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| pci1: pcie@ffe0a000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe0a000 0 0x1000>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| }; |