| /* | 
 |  *  Copyright (c) 1999-2001 Vojtech Pavlik | 
 |  */ | 
 |  | 
 | /* | 
 |  * Magellan and Space Mouse 6dof controller driver for Linux | 
 |  */ | 
 |  | 
 | /* | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
 |  * | 
 |  *  Should you need to contact me, the author, you can do so either by | 
 |  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: | 
 |  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/input.h> | 
 | #include <linux/serio.h> | 
 | #include <linux/init.h> | 
 |  | 
 | #define DRIVER_DESC	"Magellan and SpaceMouse 6dof controller driver" | 
 |  | 
 | MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* | 
 |  * Definitions & global arrays. | 
 |  */ | 
 |  | 
 | #define	MAGELLAN_MAX_LENGTH	32 | 
 |  | 
 | static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 }; | 
 | static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; | 
 |  | 
 | /* | 
 |  * Per-Magellan data. | 
 |  */ | 
 |  | 
 | struct magellan { | 
 | 	struct input_dev *dev; | 
 | 	int idx; | 
 | 	unsigned char data[MAGELLAN_MAX_LENGTH]; | 
 | 	char phys[32]; | 
 | }; | 
 |  | 
 | /* | 
 |  * magellan_crunch_nibbles() verifies that the bytes sent from the Magellan | 
 |  * have correct upper nibbles for the lower ones, if not, the packet will | 
 |  * be thrown away. It also strips these upper halves to simplify further | 
 |  * processing. | 
 |  */ | 
 |  | 
 | static int magellan_crunch_nibbles(unsigned char *data, int count) | 
 | { | 
 | 	static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?"; | 
 |  | 
 | 	do { | 
 | 		if (data[count] == nibbles[data[count] & 0xf]) | 
 | 			data[count] = data[count] & 0xf; | 
 | 		else | 
 | 			return -1; | 
 | 	} while (--count); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void magellan_process_packet(struct magellan* magellan) | 
 | { | 
 | 	struct input_dev *dev = magellan->dev; | 
 | 	unsigned char *data = magellan->data; | 
 | 	int i, t; | 
 |  | 
 | 	if (!magellan->idx) return; | 
 |  | 
 | 	switch (magellan->data[0]) { | 
 |  | 
 | 		case 'd':				/* Axis data */ | 
 | 			if (magellan->idx != 25) return; | 
 | 			if (magellan_crunch_nibbles(data, 24)) return; | 
 | 			for (i = 0; i < 6; i++) | 
 | 				input_report_abs(dev, magellan_axes[i], | 
 | 					(data[(i << 2) + 1] << 12 | data[(i << 2) + 2] << 8 | | 
 | 					 data[(i << 2) + 3] <<  4 | data[(i << 2) + 4]) - 32768); | 
 | 			break; | 
 |  | 
 | 		case 'k':				/* Button data */ | 
 | 			if (magellan->idx != 4) return; | 
 | 			if (magellan_crunch_nibbles(data, 3)) return; | 
 | 			t = (data[1] << 1) | (data[2] << 5) | data[3]; | 
 | 			for (i = 0; i < 9; i++) input_report_key(dev, magellan_buttons[i], (t >> i) & 1); | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	input_sync(dev); | 
 | } | 
 |  | 
 | static irqreturn_t magellan_interrupt(struct serio *serio, | 
 | 		unsigned char data, unsigned int flags) | 
 | { | 
 | 	struct magellan* magellan = serio_get_drvdata(serio); | 
 |  | 
 | 	if (data == '\r') { | 
 | 		magellan_process_packet(magellan); | 
 | 		magellan->idx = 0; | 
 | 	} else { | 
 | 		if (magellan->idx < MAGELLAN_MAX_LENGTH) | 
 | 			magellan->data[magellan->idx++] = data; | 
 | 	} | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* | 
 |  * magellan_disconnect() is the opposite of magellan_connect() | 
 |  */ | 
 |  | 
 | static void magellan_disconnect(struct serio *serio) | 
 | { | 
 | 	struct magellan* magellan = serio_get_drvdata(serio); | 
 |  | 
 | 	serio_close(serio); | 
 | 	serio_set_drvdata(serio, NULL); | 
 | 	input_unregister_device(magellan->dev); | 
 | 	kfree(magellan); | 
 | } | 
 |  | 
 | /* | 
 |  * magellan_connect() is the routine that is called when someone adds a | 
 |  * new serio device that supports Magellan protocol and registers it as | 
 |  * an input device. | 
 |  */ | 
 |  | 
 | static int magellan_connect(struct serio *serio, struct serio_driver *drv) | 
 | { | 
 | 	struct magellan *magellan; | 
 | 	struct input_dev *input_dev; | 
 | 	int err = -ENOMEM; | 
 | 	int i; | 
 |  | 
 | 	magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL); | 
 | 	input_dev = input_allocate_device(); | 
 | 	if (!magellan || !input_dev) | 
 | 		goto fail1; | 
 |  | 
 | 	magellan->dev = input_dev; | 
 | 	snprintf(magellan->phys, sizeof(magellan->phys), "%s/input0", serio->phys); | 
 |  | 
 | 	input_dev->name = "LogiCad3D Magellan / SpaceMouse"; | 
 | 	input_dev->phys = magellan->phys; | 
 | 	input_dev->id.bustype = BUS_RS232; | 
 | 	input_dev->id.vendor = SERIO_MAGELLAN; | 
 | 	input_dev->id.product = 0x0001; | 
 | 	input_dev->id.version = 0x0100; | 
 | 	input_dev->dev.parent = &serio->dev; | 
 |  | 
 | 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | 
 |  | 
 | 	for (i = 0; i < 9; i++) | 
 | 		set_bit(magellan_buttons[i], input_dev->keybit); | 
 |  | 
 | 	for (i = 0; i < 6; i++) | 
 | 		input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0); | 
 |  | 
 | 	serio_set_drvdata(serio, magellan); | 
 |  | 
 | 	err = serio_open(serio, drv); | 
 | 	if (err) | 
 | 		goto fail2; | 
 |  | 
 | 	err = input_register_device(magellan->dev); | 
 | 	if (err) | 
 | 		goto fail3; | 
 |  | 
 | 	return 0; | 
 |  | 
 |  fail3:	serio_close(serio); | 
 |  fail2:	serio_set_drvdata(serio, NULL); | 
 |  fail1:	input_free_device(input_dev); | 
 | 	kfree(magellan); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * The serio driver structure. | 
 |  */ | 
 |  | 
 | static struct serio_device_id magellan_serio_ids[] = { | 
 | 	{ | 
 | 		.type	= SERIO_RS232, | 
 | 		.proto	= SERIO_MAGELLAN, | 
 | 		.id	= SERIO_ANY, | 
 | 		.extra	= SERIO_ANY, | 
 | 	}, | 
 | 	{ 0 } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(serio, magellan_serio_ids); | 
 |  | 
 | static struct serio_driver magellan_drv = { | 
 | 	.driver		= { | 
 | 		.name	= "magellan", | 
 | 	}, | 
 | 	.description	= DRIVER_DESC, | 
 | 	.id_table	= magellan_serio_ids, | 
 | 	.interrupt	= magellan_interrupt, | 
 | 	.connect	= magellan_connect, | 
 | 	.disconnect	= magellan_disconnect, | 
 | }; | 
 |  | 
 | /* | 
 |  * The functions for inserting/removing us as a module. | 
 |  */ | 
 |  | 
 | static int __init magellan_init(void) | 
 | { | 
 | 	return serio_register_driver(&magellan_drv); | 
 | } | 
 |  | 
 | static void __exit magellan_exit(void) | 
 | { | 
 | 	serio_unregister_driver(&magellan_drv); | 
 | } | 
 |  | 
 | module_init(magellan_init); | 
 | module_exit(magellan_exit); |